FT4016.V HIGH COMMUTATION TRIAC On-State Current Gate Trigger Current 40 Amp 50 mA (16) Off-State Voltage 600 V / 800 V TO-3P / TO-247AD 1 2 FEATURES Glass/passivated die junctions High current Triac Low thermal resistance with clip bonding High commutation High surge current capability Low forward voltage drop Solder dip 260C, 10s Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC Meets MSL level 3, per J-STD-020, LF maximum peak of 260 C 3 MECHANICAL DATA MT1 (1) G (3) Case: TO-3P / TO-247AD. Epoxy meets UL 94V-0 flammability rating. Polarity: As marked on the body. Terminals : Matte tin plated leads, solderable per MIL-STD-750 Method 2026, J-STD-002 and JESD22-B102. Consumer grade, meets JESD 201 class 1A whisker test. MT2 (2) TYPICAL APPLICATIONS Used on inductive loads, thanks to their high commutation performances. Maximun Ratings and Electrical Characteristics at 25C SYMBOL PARAMETER CONDITIONS Value Unit IT(RMS) RMS On-state Current (full sine wave) All Conduction Angle, Tc = 80 C 40 A ITSM Non-repetitive On-State Current Full Cycle, 60 Hz (t = 16.7 ms) 420 A ITSM Non-repetitive On-State Current Full Cycle, 50 Hz (t = 20 ms) 400 A It Fusing Current tp = 10 ms, Half Cycle 1000 A 2s IGM Peak Gate Current 20 s max. 8 A PG(AV) Average Gate Power Dissipation Tj = 125 C 1 W dI/dt Critical rate of rise of on-state current IG = 2x IGT, tr 100ns 50 A/s 2 Tj = 125 C f = 120 Hz, Tj = 125 C Tj Operating Temperature (-40 +125) C Tstg Tsld Storage Temperature (-40 +150) C 260 C Soldering Temperature SYMBOL VDRM/VRRM PARAMETER Repetitive Peak Off State Voltage www.fagorelectronica.com Document Name: ft4016vhc 10s max VOLTAGE M 600 Unit N 800 V Version: Nov-11 Page Number: 1/5 FT4016.V HIGH COMMUTATION TRIAC Electrical Characteristics at Tamb = 25 C SYMBOL PARAMETER Quadrant CONDITIONS SENSITIVITY Unit 16 IGT (1) Gate Trigger Current VD = 12 VDC, RL = 33W, Tj = 25 C Q1/Q3 MAX 50 mA VGT Gate Trigger Voltage VD = 12 VDC, RL = 33W, Tj = 25 C Q1/Q3 MAX 1.5 V VGD Gate Non Trigger Voltage VD = VDRM, RL = 3.3 KW, Tj = 125 C Q1/Q3 MIN 0.2 V Holding Current IT =100 mA,Gate open, Tj = 25 C MAX 80 mA Latching Current IG = 1.2 IGT, Tj = 25 C Q1, Q3 MAX 80 mA MAX 160 mA MIN 500 V/s IH (2) IL Q2 dV/dt (2) Critical Rate of Voltage Rise VD = 0.67 x VDRM, Gate open Tj = 125 C VTM (2) Vt (o) (2) rd (2) On-state Voltage ITM = 60 Amp, tp = 380 s,Tj = 25 C MAX 1.55 V Threshold Voltage Tj = 125 C MAX 0.85 V Dynamic resistance Tj = 125 C MAX 10 mW IDRM/IRRM Off-State Leakage Current Rth(j-c) Thermal Resistance VD = VDRM, Tj = 125 C MAX 5 mA VR = VRRM, Tj = 25 C MAX 20 A 1.1 C/W for AC 360 conduction angle Junction-Case (1) Minimum IGT is guaranted at 5% of IGT max. (2) For either polarity of electrode MT2 voltage with reference to electrode MT1. Part Number Information F T 40 16 M V 00 TU FAGOR TRIAC CURRENT PACKAGING FORMING CASE VOLTAGE SENSITIVITY www.fagorelectronica.com Document Name: ft4016vhc Version: Nov-11 Page Number: 2/5 FT4016.V HIGH COMMUTATION TRIAC Ordering information PREFERRED P/N PACKAGE CODE DELIVERY MODE BASE QUANTITY FT4016MV 00TUC TU TUBE 450 Package Outline Dimensions: (mm) TO-3P / TO-247AD B E1 REF. 10 L4 30 L6 L3 Test sort name Week code 1 MC XXXV WWY 2 Marking code Format type Year code 10 TYP BOTH SIDES 3 L5 F1 L2 C F2 G1 Mounting Torque www.fagorelectronica.com Document Name: ft4016vhc 5.6 A E DIA UNIT WEIGHT (g) F D A B C D E E1 F F1 F2 G1 L2 L3 L4 L5 L6 DIA Min. 4.90 2.7 0.51 15.9 7.9 1.12 1.93 2.97 5.2 19.7 20.8 5.7 3.5 2.9 DIMENSIONS Milimeters Nominal 1.98 4.3 Max. 5.16 3.0 0.76 16.4 8.2 1.22 2.18 3.22 5.7 20.2 21.3 6.2 4.1 3.4 1 N.m Version: Nov-11 Page Number: 3/5 FT4016.V HIGH COMMUTATION TRIAC Ratings and Characteristics (Ta 25 C unless otherwise noted) Fig. 1: Maximum power dissipation versus RMS on-state current (full cycle). 50 P (W) Fig. 2: RMS on-state current versus case temperature (full cycle). 45 IT(RMS)(A) 40 40 a =180 35 30 30 25 20 20 15 10 10 5 0 IT(RMS)(A) 0 5 10 15 20 25 30 35 40 0 ITM (A) 25 50 75 450 t=20ms 350 Tj max 125 I TSM(A) 400 100 100 Fig. 4: Surge peak on-state current versus number of cycles Fig. 3: On-state characteristics (maximum values) 400 Tc(C) 0 One cycle 300 Non repetitive Tj initial = 25 C 250 200 Tj = 25 C 10 150 Repetitive Tc = 70 C 100 50 1 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 VTM (V) Fig. 5: Non repetitive surge peak on-state current for a sinusoidal pulse with width: 2 tp < 10 ms, and corresponding value of I t. 2 3000 0 Tj initial = 25 C 100 1000 Fig. 7: Relative variation of gate trigger current, holding current and latching versus junction temperature (typical values) 2 ITSM(A). I t (A s) Number of cycles 10 1 2.5 IGT,IH,IL[Tj]/IGT,IH,IL.[Tj=25C] 2 It 2.0 1000 IGT 1.5 ITSM 1.0 IH&IL 0.5 100 0.01 0.10 www.fagorelectronica.com Document Name: ft4016vhc 1.00 tp(ms) 10.00 0 -40 -20 0 20 40 60 80 100 120 140 Tj(C) Version: Nov-11 Page Number: 4/5 FT4016.V HIGH COMMUTATION TRIAC Disclaimer All product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. Fagor Electronica, S.Coop., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Fagor"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Fagor makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Fagor disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Fagor's knowledge of typical requirements that are often placed on Fagor products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Fagor's terms and conditions of purchase, including but nos limited to the warranty expressed therein. Except as expressly indicated in writing. Fagor products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Fagor product could result in personal injury or death. Customers using or selling Fagor products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Fagor and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attomeys fees, even if such claim alleges that Fagor or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Fagor personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Fagor, Product names and markings noted herein may be trademarks of their respective owners. www.fagorelectronica.com Document Name: ft4016vhc Version: Nov-11 Page Number: 5/5