Product Specification Type Number- Matsushita Unified Parts Number *1 Prepared by Checked by Approved by A.Nakano K.Tanaka K.Furuno Type Photo Reflector Application Object Detection Contactless SW. Structure GaAs Infrared Light Emitting Diode(Non-Interference)NPN Si Photo Transistor Connection Outline Attached Absolute Maximum Ratings VR 3 V IF 50 mA PD 75 mW IC 20 mA V CEO 30 V V ECO 5 V Electrical-Optical Characteristics Item Symbol Measuring Condition PC 50 mW Sheet 1/7 Established by Topr -25+85 Tstg -30+100 (Ta=25 3 ) Limit Typ. Unit Min. Max. Electrical Characteristics - Input Diode /Forward Voltage VF IF=50 mA 1.3 - 1.5 V /Reverse Current IR VR=3 V 0.01 - 10 A /Capacitance Ct VR=0 V, f=1 MHz 30 - - pF - - 200 nA Electrical Characteristics - Output Transistor /Collector to Emitter Dark Current ICEO VCE=10 V Electrical Characteristics Coupled / Collector Current IC VCC=5 V, IF=10 mA, R L=100 , d=1 mm ( 1)(Note1) - 90 880 ( 2)(Note2) A /Dark Current ID VCC=5 V, IF=10 mA, R L=100 - - 200 nA tr,tf V CC=5 V, IC=0.1 mA, R L=100 20 - - s IF=20 mA, I C=0.1 mA - - 0.4 V /Switching Time / Collector-Emitter Saturation Voltage VCE (sat) ( 1)(Note1)/Output Current measuring circuit Al /Al Vacuum Evaporation d (d=1 mm)/Glass Board(d=1 mm) IC IF RL VCC 1987-04-14 2005-10-28 Established Revised Semiconductor Company, Matsushita Electric Industrial Co.,Ltd. Sheet 2/7 Product Specification Type Number- Matsushita Unified Parts Number *1 ( 2)(Note2)I C IC Rank classification Matsushita Unified Parts Number *1 Code Rank Ic (A) Rank Color 90 220 /Orange ON2170-Q(LF) CNB13020Q0LF 180 320 /White ON2170-R1(LF) CNB13020V0LF 260 440 /Yellow ON2170-R2(LF) CNB13020X0LF 180 440 /White ON2170-R(LF) CNB13020R0LF 360 600 /Blue ON2170-S1(LF) CNB13020Y0LF 360 880 /Blue ON2170-S(LF) CNB13020S0LF Type Number ( 3)(Note3)/Input and output are practiced by electricity. ( 4) (Note4) This device is designed by disregarding for radiation. 1987-04-14 2005-10-28 Established Revised Semiconductor Company, Matsushita Electric Industrial Co.,Ltd. Sheet 3/7 Product Specification Outline Type Number- Matsushita Unified Parts Number *1 /Unit:mm /Item -/ Pin Material -/ Pin Process (0.4) 2.70.2 Anode Mark -(C0.5) /Contents /Cu /Ag Plate : Inner:Epoxy Resin : - Outer:PCT -/ Mold Material Anode Cathode Emitter Collector - Chip Center 3.40.3 (0.5) (0.7) 0.50.1 (0.15) 3.5 Min 1.50.2 0.70.25 (4.0) 15 Max 15 Max (1.8) /Color of Rank /Rank /Rank Color /Orange /White /Yellow /White /Blue /Blue ( 1) (Note1) Indicates root dimensions of lead. ( 2) (Note2) What rank color a sees an attention and can decode in a microscope. 1987-04-14 2005-10-28 Established Revised Semiconductor Company, Matsushita Electric Industrial Co.,Ltd. Sheet 4/7 Product Specification Caution For Handling Type Number- Matsushita Unified Parts Number *1 Photo-element of resin mold has been treated with molding with height pure resin by suppressing the addition of filler in order to elevate the efficiency of li ght emitting and light receiving functions. Accordingly, unlike the resins such as IC and LSI, the reliability of element will be greatly influenced by the handling of chemicals, thermal or mechanical stress. Therefore, please note the followings; A Soldering Soldering position. 1.6 mm Keep away Min.1.6 mm from the package. Soldering Temp/Time Iron Soldering temp 260 Less than 260 Soldering time 5 Less than 5 s Soldering Repeat 1 Less than 1 time /Solder (- ) Avoid soldering in the reflow solder method and the method (including flow solder, too) which does a kind to it. Flux an ingredient Please don't be used flux in chlorine an ingredient. They should be Applied after testing the assembled product in real use. - Lead bent/cut - - The lead should be bent/cut at a normal temperature and not be exposed to excessive mechanical stress(If the lead is bend/cut at a high temperature. it may cause on open circuit or other problems.) Please be especially careful after soldering. Cleaning - - Alcohol are recommended for cleaning. Or a chlorine solvent which may cause damage to the epoxy and chip die. Please don't be cleaned by ultrasonic cleaning. 1987-04-14 2005-10-28 Established Revised Semiconductor Company, Matsushita Electric Industrial Co.,Ltd. Sheet 5/7 Product Specification Caution For Handling Type Number- Matsushita Unified Parts Number *1 Product storage Use term - Epoxy resin inhales humidity fundamentally, although special dampproof control is not necessary, because this product is not reflow object merchandise. Accordingly, It is recommended that the device are stored in normal temperature and normal humidity, the storage location should be clean, free from dust and corrosive gases, and subject to little fluctuation in temperature and humidity. Also, I recommend that is used within 1 year about the use term. Other ----- Don't add an abnormal voltage.(Reverse voltage, over shoot vo ltage, under shoot voltage, etc.) This device is designed for normal uses; General electronic equipment's (Office equipment Communication equipmentInstrumentation equipmentHome electrification product etc). If this device is required specific reliabilityand is used f or specific uses(FlyingSpace relationTraffic equipment'sCombustion equipment'sSafety equipment's etc) where fault of device is in danger of human lifeuser should ask to Matsushita Electronics Corporation. ( ) (Note)Please be careful that the lead is not oxidized. * Storage condition :5 35 :45 %75 %Ta=5 35 RH=45 %75 % 1987-04-14 2005-10-28 Established Revised Semiconductor Company, Matsushita Electric Industrial Co.,Ltd. Sheet .6/7 Product Specification Reliability Guarantee Criterion Failure Criterion Type Number- Matsushita Unified Parts Number *1 (MIL-STD-19500H LTPD:15 %) Reliability Guarantee CriterionMIL-STD-19500H LTPD 15 % Item Operating Test High Temperature Humidity Storage Life Test High Temperature Storage Life Test Low Temperature Storage Life Test Test Conditions /Result Ta=65 ,IF=23 mA, Vcc=10 V, t=1 000 h 0/15 Ta=60 ,RH=90 %,t=1 000 h 0/15 Ta=100 ,t=1 000 h 0/15 Ta=-30 ,t=1 000 h 0/15 Ta = 100 -30 , 10 Cycle Thermal Shock Test (5 min) 0/15 (5 min) Ta = 100 25 -30 , 20 Cycle Temperature Cycle Test (30 min) (5 min) 0/15 (30 min) :270 ,10 , - 2.0 mm , Soldering Heat Resistance Test 0/15 Solder:270 ,t=10 s,Min:2.0mm from the Package :Ta=85 ,RH=85 %,t=16 h :230 ,5 , Solderability Test Solder 0/15 :230 ,t=5 s with flux 1 m 3 cm 3 Drop Test Distance of dropping : 1 m 0/15 Drop the device on the maple board 3 times - 5 N,30 Terminal Strength Test Weight due to the terminal:5 N,t=30 s 0/15 2.5 N,90 ,2 - 0/15 Weight due to the terminal:2.5 N, Bend the Terminal Bend Test Terminal at right 90 angle to back, 2 times Failure Criterion Symbol /Item ()/Criterion(Note) /Lower Limit /Upper Limit Unit Electrical Characteristic Collector Current I C 50 150 % Collector to Emitter Dark Current I CEO - Ux2.0 nA Forward Voltage VF - Ux1.2 V , Appearance, etc Appearance According to visual spec Rusting, Discoloring (-)No rusting, discoloring (Lead) 95 % The Solder must stick to steeped part more than 95 % of the face area. Solderability ()(Note) U:Upper initial standard 1987-04-14 2005-10-28 Established Revised Semiconductor Company, Matsushita Electric Industrial Co.,Ltd. Sheet 7/7 Product Specification Packing Specification Type Number- Matsushita Unified Parts Number *1 /Unit:mm 1.Magazine (10) (11.5) (356) 2.-Carton Label Sticks position (368) (72) Label (78) 3.-Packing Case Label Sticks position (407) (168) Label (382) 4.Quantity & Contents /Form /Magazine -/Carton - /Packing case /Quantity /Contents 100 pcs 3 000 pcs 30 000 pcs 30 /30 Magazine -x10 /10 Cartons /Material PC (/Anti-static) - /Corrugated paper - /Corrugated paper () () (Note) Type No., the quantity, production times (Date code) be entry to the label. 1 /Sealed a product name all in principle. Q /Rank :ON2170-Q(LF) CNB13020Q0LF R /Rank :ON2170-R(LF) CNB13020R0LF R1 /Rank:ON2170-R1(LF) CNB13020V0LF S1 /Rank:ON2170-S1(LF) CNB13020Y0LF R2 /Rank:ON2170-R2(LF) CNB13020X0LF S /Rank :ON2170-S(LF) CNB13020S0LF 2 Number means the following 5O 1987-04-14 2005-10-28 Established Revised (2005 10 /October) Semiconductor Company, Matsushita Electric Industrial Co.,Ltd.