SF2002E * * * * * RF Filter for EGSM Low-loss Design No Matching Circuit Required 3.0 x 3.0 x 1.3 mm Package Complies with Directive 2002/95/EC (RoHS) 942.5 MHz SAW Filter Pb Absolute Maximum Ratings Rating Value Maximum Input Power Units +15 dBm -5 to +5 VDC Operable Temperature Range -45 to +125 C Specification Temperature Range -30 to +85 C Storage Temperature Range in Tape and Reel -40 to +85 C 265 C DC Voltage on any Non-ground Terminal Maximum Soldering Profile, 5 Cycles/10 seconds Maximum SM3030-6 Electrical Characteristics Characteristic Sym Notes Min Typ Max Units Nominal Operating Frequency fC 942.5 Passband Insertion Loss, 925 to 960 MHz IL 2.2 3.0 dB 0.8 1.5 dBP-P Amplitude Ripple, 925 to 960 MHz MHz Attenuation Referenced to 0 dB: 17.0 20.5 dB 905 to 915 MHz 5.0 15.0 dB 980 to 1000 MHz 13.0 30.0 dB 1000 to 2000 MHz 20.0 23.0 DC to 905 MHz VSWR, 925 to 960 MHz 2.2 dB 2.7 dB Source Impedance 1 50 Load Impedance 1 50 Case Style SM3030-6 3 x 3 mm Nominal Footprint Lid Symbolization (YY=year, WW=week, D=day) 597 YWWS Electrical Connections 50 Connection Terminals Input 2 Output 5 Ground All others pin 2 pin 5 SAW Filter TOP VIEW 50 All Others CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. NOTES: 1. 2. 3. 4. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 and measured with 50 network analyzer. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. "LRIP" or "L" after the part number indicates "low rate initial production" 5. 6. 7. 8. Copyright (c) Murata Manufacturing Co, Ltd. All rights reserved. March 2014 SF2002E (R) 6/5/17 Page 1 of 5 and "ENG" or "E" indicates "engineering prototypes." The design, manufacturing process, and specifications of this filter are subject to change. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. US and international patents may apply. Murata, stylized Murata logo, and Murata N.A., Inc. are registered trademarks of Murata Manufacturing Co., Ltd. www.murata.com FREQUENCY CHRACTERISTICS: 1. wideband response: Copyright (c) Murata Manufacturing Co, Ltd. All rights reserved. March 2014 SF2002E (R) 6/5/17 Page 2 of 5 www.murata.com S11 Return Loss & VSWR: S22 Return Loss & VSWR: Copyright (c) Murata Manufacturing Co, Ltd. All rights reserved. March 2014 SF2002E (R) 6/5/17 Page 3 of 5 www.murata.com SM3030-6 Case 6-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case and PCB Footprint Dimensions Dimension A B C D E F G H I J K L M N O K L N K N mm Nom 3.00 3.00 1.25 0.90 2.80 1.60 0.85 1.50 0.60 1.30 3.20 1.70 1.05 0.81 0.38 Min 2.87 2.87 1.12 0.77 2.67 1.47 0.72 1.37 0.47 1.17 Max 3.13 3.13 1.38 1.03 2.93 1.73 0.98 1.63 0.73 1.43 Min 0.113 0.113 0.044 0.030 0.105 0.058 0.028 0.054 0.019 0.046 Inches Nom 0.118 0.118 0.049 0.035 0.110 0.063 0.033 0.059 0.024 0.051 0.126 0.067 0.041 0.032 0.015 Max 0.123 0.123 0.054 0.040 0.115 0.068 0.038 0.064 0.029 0.056 Case Materials O Materials N M M PCB Footprint Top View Solder Pad Plating 0.3 to 1.0 m Gold over 1.27 to 8.89 m Nickel Lid Plating 2.0 to 3.0 m Nickel Body Al2O3 Ceramic Pb Free TOP VIEW BOTTOM VIEW B 6 1 3 597 YWWS A 2 G C 5 E 4 D Copyright (c) Murata Manufacturing Co, Ltd. All rights reserved. March 2014 SF2002E (R) 6/5/17 Page 4 of 5 F H 6 1 5 2 4 3 I J www.murata.com Inches "B" REF. 100 REF. Tape and Reel Specifications "B" millimeters Quantity Per Reel 7 178 500 13 330 3000 See Detail "A" 13. 0 12.0 20 .2 2.0 COMPONENT ORIENTATION 2.0 4.0 A 1.5 1.75 0.3 5.5 597 YWWS 3.35 B 3.35 3.30 12.0 PIN #1 RO.3 (MAX.) B 8.0 A 1.6 1.4 R0.5 (TYP.) 1.5 SECTION A-A SECTION B-B Copyright (c) Murata Manufacturing Co, Ltd. All rights reserved. March 2014 SF2002E (R) 6/5/17 Page 5 of 5 USER DIRECTION OF FEED www.murata.com