44
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors (50 ohm/75 ohm)
Product Facts
Bayonet lock coupling for
quick connect/disconnect
Various connectors available
in 50 and 75 ohm versions
Fully intermateable with
comparable BNC UG/U
connectors
Full range of Hex Crimp
and O Crimp Products for
common coaxial cables.
Low VSWR
Single crimp connectors
offer one crimping operation
for fast application
Twist-on connectors require
no special tooling for
application to the cable
Field serviceable (Category
A) connectors qualified to
MIL-C-39012
Field replaceable (Category
C) plugs with captivated
center contact
Field replaceable plugs can
be terminated with industry
standard tooling
Tarnish resistant Nickel
finish available
Choice of different dielectrics
Listed under the Component
Program of Underwriters
Laboratories Inc.,
File No. E81956
PC Board soldered
connectors are recognized
under the Component
Program of Underwriters
Laboratories Inc.,
File No. E81956
Certified by Canadian
Standards
Association
File No. LR 7189
Between Series Adapters
For BNC Between Series Adapters, see
pages 251-260.
R
R
R
The Tyco Electronics BNC
RF connector family with
bayonet locking coupling
provides highly reliable,
quick connect/disconnect
coaxial connections.
Exclusive single and
O crimp terminations allow
positive insulation grip
and require no soldering,
providing terminations at
a very low overall applied
cost.
Available in both 50 and 75
ohm versions, these con-
nectors feature numerous
styles including cable plugs
and jacks, adapters and
printed circuit board con-
nectors. In addition to a
variety of crimp type termi-
nations, connectors are fur-
nished in field replaceable
and twist-on styles. These
connectors accept a wide
range of coaxial cables and
are intermateable with
industry standard connec-
tors designed to MIL-C-
39012 specifications.
Tyco Electronics can also
supply low cost alternatives
with an extensive commer-
cial type product line. A
lower cost consumer series
product offers the capability
to supply center contacts in
strip form and allow for auto-
mated center contact crimp
technology. All connectors
are designed around the
mil-specifications, but utilize
low-cost materials, offering
comparable mechanical
and electrical performance.
Product Specifications
108-1275 — BNC Ohm Terminators
108-12020 — BNC O Crimp
Connectors
108-12044 — BNC Commercial Hex
Crimp
108-12047 — BNC Commercial and
Hex Crimp Connectors
108-12074 — BNC Solder Jacks
108-12075 — BNC Connectors
(Category A)
108-12078 — BNC Commercial PCB
Panel-Mount Jacks
108-12002 — BNC Commercial
T Adapter
108-12095 — BNC Commercial 75
Ohm Connectors
108-12096 — BNC Commercial Feed-
Thru and Bulkhead
Adapters
108-12079 — BNC Commercial 50
Ohm Solder Jacks
108-12103 — BNC Commercial PCB
Press Fit Jacks
Application Specifications
114-12001 — BNC Commercial PCB
Jack Press Fit
Performance Specifications
Page 45
Material Specifications — Page 46
Tooling — Pages 266-268
Military Category — All MIL type
O crimp connectors are Category B Type
(Tyco Electronics Crimp Tooling), unless
otherwise noted.
Packaging — All MIL Type connectors
are packaged individually, all O crimp
connectors are bulk packaged and all Hex
crimp connectors are individually pack-
aged unless otherwise noted.
Related Product Data
BNC Connectors (50 ohm/75 ohm) Performance Specifications
Single Category B Straight Right-Angle Commercial Commercial Commercial PC Commercial
Characteristics Crimp O Crimp Solder Solder O Crimp O Crimp Board Solder
(MIL Type) (MIL Type) Clamp Clamp & Hex Crimp & Hex Crimp 50 & 75 Ohms 50 Ohm Jacks
50 Ohms 75 Ohms
Electrical
Impedance, Nom. 50 50 50 50 50 75 50 & 75 50 & 75
(Ohms)
Working Voltage 500 500 500 500 500 500 500 500
(Volts RMS)
Contact Resistance Inner: 1.5 Inner: 1.5 Inner: 1.5 Inner: 1.5 Inner: 2.0 Inner: 2.0 Inner: 6/1.5 Inner: 2.75
(Milliohms) Outer: 0.3 Outer: 0.2 Outer: .20 Outer: .20 Outer: 1.0 Outer: 2.0 Outer: 3/0.2 Outer: 1.0
Initial Insulation Resistance 5000 5000 5000 5000 5000 5000 5000 5000
(Megohms)
Dielectric Withstanding 1500 1500 1500 1500 1500 1500 1500 1500
Voltage (VAC)
Corona Level at 70,000 ft. 375 375 375 375 375 375 375
(Volts, RMS)
RF Leakage, Max. -55 at -55 at -55 at -55 at -55 at ——
(dB) 2-3 GHz 2-3 GHz 2-3 GHz 2-3 GHz 1-2 GHz
RF Insertion Loss, 0.2 at 0.2 at 0.3 at 0.2 at 0.15 at ——
Max. (dB) 3 GHz 3 GHz 3 GHz 3 GHz 2 GHz
Frequency Range 0-2.5 0-4 0-4 0-4 0-4 0-2 0-4 and 0-4
(GHz) 0-2
VSWR in Frequency 1.35 1.30 1.30 1.35 1.30 1.30
Range Max.
Mechanical
Force to Engage (lbs. [N])/couple, 13.3/11.12 13.3/11.12 13.3/.028 13.3/.028 26.7/26.69 26.7/26.69 ——
(in-lbs. [N-M]) max. [3/2.5] [3/2.5] [3/2.5] [3/2.5] [6/6.0] [6/6.0]
Coupling Nut Retention, 444.8 444.8 444.8 444.8 266.9 266.9 ——
Min. N [lbs.] [100] [100] [100] [100] [60] [60]
Cable Retention, 266.9 [60] 266.9 [60] 177.9 [40] 177.9 [40] 266.9 [60] 266.9 [60] 266.9 [60]
N [lbs.] (RG58C/U) (RG58C/U) (RG58C/U) (RG58C/U) (RG58C/U) (RG58C/U) (PCB Ret)
Durability (Cycles) 500 500 500 500 500 500 500 500
Jam Nut Mounting Torque, 25 25 25 25 25 253/12425
Max. [N•m] (in. lbs.) [2.8] [2.8] [2.8] [2.8] [2.8] [2.8/1.4] [2.8]
Environmental
Temperature Range, -65 to +85 -65 to +1651-65 to +165 -65 to +165 -55 to +85 -55 to +85 -55 to +85 -65 to +165
Operating (C°) -55 to +852
MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202
Vibration Method 204 Method 204 Method 204 Method 204 Method 2005 Method 204 Method 204
Cond. B Cond. B Cond. B Cond. B Cond. III Cond. B Method 201A Cond. B
MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202
Physical Shock Method 213 Method 213 Method 213 Method 213 Method 2004 Method 213 Method 213 Method 213
Cond. G, 50 G’s Cond. G, 50 G’s Cond. G Cond. G Cond. G, 100 G’s Cond. I, 100 G’s Cond. I or A, 50 G’s Cond. I, 100 G’s
MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202
Thermal Shock Method 1003
Method 107 Method 107 Method 107 Method 107 Cond. A Method 107 Method 107 Method 107
Moisture MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202
Method 1002
Resistance Method 106 Method 106 Method 106 Method 106 Type II Method 106 Method 106 Method 106
MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202
Salt Spray Method 101 Method 101 Method 101 Method 101 Method 1001 Method 101 Method 101 Method 101
Cond. B Cond. B Cond. B Cond. B Cond. B Cond. B Cond. B Cond. B
Product 108-12002 108-12020 108-12044 108-12095 108-12078 108-12079
Specification 108-12047
1Assembled to cable with polytetrafluorethylene dielectric.
2Assembled to cable with polyethylene dielectric.
3For Metal Threads
4For Polyester Threads
45
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
46
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors (50 ohm/75 ohm) Performance Specifications (Continued)
Single Category Straight Right-Angle Commercial Commercial Commercial Commercial
Connector Crimp B & C Solder Solder O Crimp PCB PCB Solder
Component (MIL Type) O Crimp Clamp Clamp Hex Crimp & Solder Press Fit Ohm Jacks Adapters
(MIL Type) Terminators
Connector Material
Collar Brass Brass Brass Brass Brass QQ-B-626 ——
Brass
QQ-B-626 QQ-B-626 Zinc QQ-Z-363 QQ-B-626
Brass Brass
Outer Contact QQ-B-626 Phos. Bronze Brass Brass Brass ——
QQ-B-626
(Plug) Beryl. Copper QQ-B-750 MIL-C-21768 Beryl. Copper
QQ-C-530 QQ-C-530
Zinc
Shell Brass Brass Brass Zinc Zinc Zinc QQ-Z-363 Brass
(Jack) QQ-B-626 QQ-B-626 QQ-Z-363 QQ-Z-363 QQ-Z-363 Brass QQ-B-626
QQ-B-626
PTFE
Polyethylene
PTFE PTFE
Dielectric MIL-P-19468
PTFE PTFE PTFE
Polypropylene Polymethylpentene
PTFE
MIL-P-19468 MIL-P-19468
Polypropylene MIL-P-19468 Polymethylpentene Gen. Purpose1MIL-P-19468 Polyester PBT Polypropylene,
Gen. Purpose Gen. Purpose MIL-P-24519 Gen. Purpose
Brass
Center Contact Brass Brass Brass Brass Brass ——
QQ-B-626
(Plug) QQ-B-626 QQ-B-626 QQ-B-626 Beryl. Copper
QQ-C-530
Beryl. Copper Beryl. Copper Phos. Bronze Phos. Bronze
Center Contact ASTM-B-643 ASTM-B-643 Beryl. Copper Beryl. Copper Beryl. Copper Phos. Bronze Beryl. Copper QQ-B-570 QQ-B-570
(Jack) QQ-C-530 QQ-C-530 QQ-C-530 QQ-B-750 QQ-C-530 Beryl. Copper Beryl. Copper
QQ-C-530 QQ-C-530
Gasket Silicon Rubber Silicon Rubber Silicon Rubber Silicon Rubber Silicon Rubber ——
Silicon Rubber
QQ-R-765 QQ-R-765 QQ-R-765 QQ-R-765
Ferrule Copper Copper ——
Copper —— ——
QQ-C-576 QQ-C-576 QQ-C-576
Connector Primary Finishes2
Silver Silver Silver
Collar QQ-S-365 QQ-S-365 Silver/ Silver/ Bright Nickel ——
QQ-S-365
Bright Nickel Bright Nickel Bright Nickel Bright Nickel QQ-N-290 Bright Nickel
QQ-N-290 QQ-N-290 QQ-N-290
Silver Bright or Silver
Outer Contacts QQ-S-365 QQ-S-365 Silver/ Silver/ Matte Nickel Bright Nickel Bright Nickel Bright Nickel QQ-S-365
(Plug & Jack) Gold Bright Nickel Bright Nickel Bright Nickel QQ-N-290 QQ-N-290 QQ-N-290 QQ-N-290 Bright Nickel
QQ-N-290 QQ-N-290
Tin Lead Tin Lead Tin Lead Silver
Center Contacts MIL-G-45204 Gold Gold Gold ASTM-B-545 ASTM-B-545 Gold ASTM-B-545 QQ-S-365
(Plug & Jack) Silver MIL-G-45204 Silver, QQ-S-365 Silver, QQ-S-365 MIL-B-45204 Silver, QQ-S-365 Gold
Gold, MIL-G-45204 Gold, MIL-G-45204 Gold, MIL-G-45204 MIL-G-45204
Silver
Ferrule3QQ-S-365 QQ-S-365 ——
Tin Lead —— ——
Tin Lead ASTM-B-545
ASTM-B-545
1Several pc board connectors have an outer polyester PBT insulator per MIL-P-24519.
2If more than one finish is listed, refer to individual catalog page(s) or customer drawings for exact specification.
3Ferrules with tin-lead finish are used with nickel plated outer contacts.
BNC Connectors, 50 Ohm
L
Max.
14.53
[.572]
Dia. Max.
Plugs, Crimp
L
Max.
Single Crimp
14.53
[.572]
Dia. Max.
Hex and O Crimp
Interchangeable Dies
CERTI-CRIMP for PRO-CRIMPER Interchangeable
RG/U Termination Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand Part No.
Cable Type Plating Dielectric Style Lwith or Tool 69710-1
Integral Die PRO-CRIMPER & 626 Pneu.
Adapter 679304-1 Head 318161-1
178, 178A, 33.33
178B, Single Crimp Silver
PTFE
MIL Type 69245-4 69471-5330876-0
196, 196A 1.312
Hex Crimp Nickel Polyethylene Commercial 33.53 58436-3 2-5221128-1
1.320
O Crimp Nickel Polyethylene Commercial 27.69 220009-5 318450-2 220217-3 1-5227079-6
174, 1.090
188, 188A,
O Crimp Nickel
PTFE
MIL Type 30.18 1424050-1 220026-1 5225395-7
316 1.188
Single Crimp Silver
PTFE
MIL Type 33.33 69245-2 69422-2-5330061-1
1.312
Hex Crimp Nickel Polyethylene Commercial 33.53 58436-3 2-5221128-3
179, 179A, 1.320
179B, 161, O Crimp Nickel Polyethylene Commercial 27.69 1424050-1 220217-3 2-5227079-2
187, 187A, 1.090
BELDEN O Crimp Nickel
PTFE
MIL Type -30.18 ——220026-1 5225395-8
9221 1.188
Single Crimp Silver
PTFE
MIL Type 33.33 91910-1 69408-2-5329446-1
1.312
RD 316, 188, O Crimp Nickel Polyethylene Commercial 27.69 69477-4 58539-1 8-5227079-2
Double Braid 1.090
Hex Crimp Nickel Polyethylene Commercial 33.53 58436-122-5221128-7
BELDEN 1.320
8219 O Crimp Nickel Polyethylene Commercial 27.69 220187-1 58435-11220217-1 6-5227079-73
1.090
BELDEN 9907,
89907 COMM/ O Crimp Nickel Polyethylene Commercial 27.69 220187-1 318452-2 220217-1 6-5227079-84
SCOPE 2104 1.090
O Crimp Nickel Polyethylene Commercial 27.69 69477-4 58539-1 58376-1 1-5227079-9
BELDEN 1.090
8218 O Crimp Nickel
PTFE
MIL Type 30.18 91904-1 69669-2 1-5225395-0
1.188
1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1.
2Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1.
3For use with BELDEN 9907 cable, COMM/SCOPE 3104 cable, and BELDEN 8219 cable only.
4For use with BELDEN 89907 cable, and COMM/SCOPE 2104 cable only.
47
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
BELDEN is a trademark of Belden Wire
and Cable Company.
COMM/SCOPE is a trademark of
Commscope, Inc.
48
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Plugs, Crimp (Continued)
L
Max.
14.53
[.572]
Dia. Max.
L
Max.
Single Crimp
14.53
[.572]
Dia. Max.
Hex and O Crimp
Interchangeable Dies
CERTI-CRIMP for PRO-CRIMPER Interchangeable
RG/U Termination Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand Part No.
Cable Type Plating Dielectric Style Lwith or Tool 69710-1
Integral Die PRO-CRIMPER & 626 Pneu.
Adapter 679304-1 Head 318161-1
Hex Crimp Nickel Polyethylene Commercial 33.53 58436-125221128-13
1.320
O Crimp Nickel Polyethylene Commercial 27.69 220187-1 58435-11220217-1 5227079-5
58, 58A, 1.090
58B, 58C O Crimp Nickel
PTFE
MIL Type 33.74 269478-1 220189-3 69727-5225395-1
1.328
Single Crimp Silver
PTFE
MIL Type 33.33 291904-4 69223-1 2-5329444-1
1.312
BELDEN Hex Crimp Nickel Polyethylene Commercial 33.53 58436-121-5221128-0
88240, 1.320
BERK-TEK O Crimp Nickel Polyethylene Commercial 33.33 220187-1 58435-11220217-1 4-5227079-3
BTDC-58, 1.312
COMM/ O Crimp Nickel
PTFE
MIL Type 33.33 269478-1 220189-3 69727-4-5225395-2
SCOPE 2135 1.312
O Crimp Nickel Polyethylene Commercial 27.69 220187-1 58435-11220217-1 5227079-6
223, 1.280
55, 55A, O Crimp Nickel
PTFE
MIL Type 43.64 269478-1 220189-3 69727-5225395-3
55B 1.718
Single Crimp Silver
PTFE
MIL Type 33.33 91904-3 69424-2-5329444-2
1.312
O Crimp Nickel Polyethylene Commercial 27.69 220187-1 58435-11220217-1 6-5227079-1
1.090
142, 142A, O Crimp Nickel
PTFE
MIL Type 30.18 269478-1 220189-3 69727-5225395-6
142B, 400 1.188
Single Crimp Silver
PTFE
MIL Type 33.33 269331-1 69429-1 2-5330358-2
1.312
Consult Tyco Electronics for recommended crimp tooling.
1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1.
2Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1.
3Bulk packaged.
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
BELDEN is a trademark of Belden Wire
and Cable Company.
BERK-TEK is a trademark of Nexans, Inc.
COMM/SCOPE is a trademark of
Commscope, Inc.
BNC Connectors, 50 Ohm (Continued)
Plugs, Crimp (Continued)
Interchangeable Dies
CERTI-CRIMP for PRO-CRIMPER Interchangeable
RG/U Termination Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand Part No.
Cable Type Plating Dielectric Style Lwith or Tool 69710-1
Integral Die PRO-CRIMPER & 626 Pneu.
Adapter 679304-1 Head 318161-1
Hex Crimp Nickel Polyethylene Commercial 33.53 58436-121-5221128-1
1.320
O Crimp Nickel Polyethylene Commercial 27.69 220187-2 58435-11220217-2 5227079-7
124, 140, 210, 1.090
62, 62A, 62B, O Crimp Nickel Polyethylene Commercial 27.69 220187-2 58435-11220217-2 1-5227079-159, 59A, 59B, 1.090
BELDEN 9291,
O Crimp Nickel
PTFE
MIL Type 30.18 58537-1 5225395-2
9209, 9269 1.188
Single Crimp Silver
PTFE
MIL Type 33.33 69141-1 2-5329445-1
1.312
302, BELDEN
88241, 89269, Hex Crimp Nickel Polyethylene Commercial 33.53 58436-121-5221128-1
Hi-Temp 62A, 1.320
Times PL62,
BERK-TEK, BTDC-59, O Crimp Nickel
PTFE
MIL Type 34.14 69477-1 58537-1 69669-1 4-5225395-1
BTDC-62 1.344
Hi-Temp 59,
Times PL59, O Crimp Nickel Polyethylene Commercial 33.33 58537-1 5-5227079-3
PLF59 (20 AWG C.C.) 1.312
BELDEN
9104, 9240, Hex Crimp Nickel Polyethylene Commercial 33.53 58436-121-5221128-7
9112, 9167, 1.320
9259, 9266,
Times O Crimp Nickel
PTFE
MIL Type 30.94 258537-1 69669-1 2-5225395-0
FM-59 1.218
BELDEN 8281,
9141, 9231, Single Crimp Silver Polypropylene MIL Type 41.50 69652-220000-1 5330878
Western Electric 1.634
724, 728, 3049
8, 8A, O Crimp Silver
PTFE
MIL Type 27.31 220015-1 5225886-1
213 1.075
11, 11A O Crimp Silver
PTFE
MIL Type 47.63 220015-1 5225886-4
1.875
BELDEN 9914, O Crimp Silver
PTFE
MIL Type 47.63 220015-1 5225886-7
Times FM-8 1.875
Alpha 9847, O Crimp Silver
PTFE
MIL Type 47.63 220015-1 225886-5
BELDEN 8213, 9292 1.875
9, 9A, 9B, O Crimp Silver
PTFE
MIL Type 52.38 220015-1 5225886-1
214 2.062
1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1.
2Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1.
2Tyco Electronics PRO-CRIMPER II Hand Tool Frame without dies Part No. 354940-1
L
Max.
14.53
[.572]
Dia. Max.
L
Max.
Single Crimp
14.53
[.572]
Dia. Max.
Hex and O Crimp
49
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
BELDEN is a trademark of Belden Wire
and Cable Company.
BERK-TEK is a trademark of Nexans, Inc.
50
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Right-Angle Plugs,
Crimp
L
Max.
14.53
[.572]
Dia. Max.
26.57
[1.046] L
Max.
14.53
[.572]
Dia. Max.
26.57
[1.046]
Single Crimp Hex and O Crimp
Interchangeable Dies
CERTI-CRIMP for PRO-CRIMPER Interchangeable
RG/U Termination Center Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand
Cable Type Contact Plating Dielectric Style Lwith or Tool 69710-1 Part No.
Plating Integral Die PRO-CRIMPER & 626 Pneu.
Adapter 679304-1 Head 318161-1
174, 188, Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 58436-3 5413959-3
188A, 316
pentene 1.553
Single Crimp Gold Silver
PTFE
MIL Type 44.45 91910-1 69422-5331178-0
1.750
179, 179A, 39.45
179B, 161, Hex Crimp Gold Nickel Polymethyl- Commercial 1.553 58436-3 5413959-4
187, 187A, pentene
BELDEN 9221
180, 180A, 180B, Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 58436-3 5413959-5
195, 195A pentene 1.553
BELDEN 9907,
89907, 8219, Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 58436-1 5413959-6
COMM/SCOPE pentene 1.553
2104, 3104
Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 58436-1 5413959-1
pentene 1.553
58, 58A, O Crimp Gold Nickel
PTFE
MIL Type 37.29 69478-1 220189-3 69727-1 5225974-1
58B, 58C 1.468
Single Crimp Gold Silver
PTFE
MIL Type 44.45 91904-1 69223-1 5331175-0
1.750
O Crimp Gold Nickel
PTFE
MIL Type 37.29 69478-1 220189-3 69727-1 5225974-2
55, 55A, 1.468
55B, 223 Single Crimp Gold Silver
PTFE
MIL Type 44.45 91904-3 69429-1 5331182-0
1.750
142, 142A, Single Crimp Gold Silver
PTFE
MIL Type 44.45 69331-1 69429-1 5331182-0
142B, 400 1.750
124, 140, 210,
62, 62A, 62B, 37.29
59, 59A, 59B, O Crimp Gold Nickel
PTFE
MIL Type 1.468 58537-1 69669-1 5225974-5
BELDEN 9291,
9209, 9269
38.10
[1.500]
14.53
[.572]
Dia. Max.
Plugs, Twist-On
Related Product Data
Twist-On plugs must be used with cable
that has a solid conductor. These plugs
are not recommended for applications
where the cable frequently moves or
flexes.
Mating Twist-On Jack Page 52 RG/U Contact Body Dielectric Style Part No.
Cable Plating Plating
59, 59A, Gold Nickel Polymethyl- Commercial 5414265-3
59B pentene
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
BELDEN is a trademark of Belden Wire and Cable Company.
COMM/SCOPE is a trademark of Commscope, Inc.
BNC Connectors, 50 Ohm (Continued)
L
Max.
11.1
[.437]
Dia. Max.
11.08
[.436]
Dia. Max.
L
Max.
Single Crimp Hex and O Crimp
Jacks, Crimp
Interchangeable Dies
CERTI-CRIMP for PRO-CRIMPER Interchangeable
RG/U Termination Center Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand
Cable Type Contact Plating Dielectric Style Lwith or Tool 69710-1 Part No.
Plating Integral Die PRO-CRIMPER & 626 Pneu.
Adapter 679304-1 Head 318161-1
Hex Crimp Gold Nickel Polymethyl- Commercial 33.02 58436-3 5413779-3
pentene 1.300
O Crimp Gold Nickel Polypro- Commercial 30.48 1424050-1 220217-3 5228979-7
174, 188, pylene 1.200
188A, 316 O Crimp Gold Nickel
PTFE
MIL Type -30.48 1424050-1 220026-1 5225396-7
1.200
Single Crimp Gold Silver
PTFE
MIL Type 33.33 ——69422-2-5330062-1
1.312
179, 179A,
179B, 161, Hex Crimp Gold Nickel Polymethyl- Commercial -33.02 58436-3 2-5413779-4
187, 187A, pentene 1.300
BELDEN 9221
O Crimp Gold Nickel Polypro- Commercial 30.48 220187-1 58435-11220217-1 5228979-5
58, 58A, pylene 1.200
58B, 58C O Crimp Gold Nickel
PTFE
MIL Type 30.48 291901-1 69727-5225396-11
1.200
223, 55, Single Crimp Gold Silver
PTFE
MIL Type 33.33 69140-2 91904-3 69424-2-5329452-2
55A, 55B 1.312
124, 140, 210, O Crimp Gold Nickel Polypro- Commercial 30.48 220187-2 58435-11220217-2 5228979-6
62, 62A, 62B, pylene 1.200
59, 59A, 59B,
BELDEN 9291, O Crimp Gold Nickel
PTFE
MIL Type 30.48 58537-1 269669-1 5225396-2
9209, 9269 1.200
1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1.
51
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
BELDEN is a trademark of Belden Wire
and Cable Company.
52
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Jacks, Twist-On
Related Product Data
Twist-on jacks must be used with
cable that has a solid conductor.
These jacks are not recommended
for applications where the cable
frequently moves or flexes.
Mating Twist-On Plug Page 50
RG/U Center Body Dielectric Style Part No.
Cable Contact Plating
59, 59A, 59B Gold Nickel Acetal Commercial 222428-1
40.14
[1.580] Max.
Panel Jacks, Crimp
28.96
[1.140]
Max. 2.77
[.109]
12.7 ±0.1
[.500 ±.004]
12.7 ±0.1
[.500 ±.004]
Recommended Panel Cutout
Interchangeable Dies
CERTI-CRIMP for PRO-CRIMPER Interchangeable
RG/U Termination Center Body Hand Tool Hand Tool 354940-1 Dies for Hand
Cable Type Contact Plating Dielectric Style with or Tool 69710-1 Part No.
Plating Integral Die PRO-CRIMPER & 626 Pneu.
Adapter 679304-1 Head 318161-1
174, 188, 188A, 316 O Crimp Gold Nickel
PTFE MIL Type
1424050-1 220026-1 5225397-7
58, 58A, 58B, 58C O Crimp Gold Nickel
PTFE MIL Type
-69478-1 91901-1 69727-5225397-1
124, 140, 210, 62, 62A, 62B,
59, 59A, 59B, BELDEN 9291, O Crimp Gold Nickel
PTFE MIL Type
-69477-1 258537-1 269669-1 5225397-2
9209, 9269, 89269
Dia.
11.2
[.441] Dia.
17.84
[.702] Max.
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
BELDEN is a trademark of Belden Wire
and Cable Company.
53
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Bulkhead Jacks,
Crimp
Note: Panel Insulating
Bushings Page 54
HL
Max.
HL
Max.
11.04
[.435]
Min.
12.82
[.505]
Dia. Min.
12.83
[.505 ]
+0.13
-0.00
+.005
-.000
Recommended
Panel Cutouts
Maximum Panel
Thickness 3.18 [.125]
Single Crimp Hex and O Crimp
H = 11/16" across flats, 20.32 [.800] Max. across points
Dia.
5.54
[.218 ]
+0.08
-0.00
+.003
-.000
Interchangeable Dies
CERTI-CRIMP for PRO-CRIMPER Interchangeable
RG/U Termination Center Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand
Cable Type Contact Plating Dielectric Style Lwith or Tool 69710-1 Part No.
Plating Integral Die PRO-CRIMPER & 626 Pneu.
Adapter 679304-1 Head 318161-1
Hex Crimp Gold Nickel Polymethyl- Commercial 36.83 58436-3 5413771-3
pentene 1.450
O Crimp Gold Nickel Polypro- Commercial 34.93 ——220217-3 5228980-7
174, 188, pylene 1.375
188A, 316 O Crimp Gold Nickel
PTFE
MIL Type 35.71 ——220026-1 5225398-7
1.406
Single Crimp Gold Silver
PTFE
MIL Type 32.13 ——69422-2-5330063-1
1.265
179, 179A, O Crimp Gold Nickel
PTFE
MIL Type 35.71 1424050-1 220026-1 5225398-8
179B, 161, 1.406
187, 187A, Single Crimp Gold Silver
PTFE
MIL Type 32.13 91910-1 69408-2-5329458-1
BELDEN 9221 1.265
Times RD316 O Crimp Gold Nickel
PTFE
MIL Type 35.71 91904-1 69669-2 1-5225398-5
1.406
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
BELDEN is a trademark of Belden Wire
and Cable Company.
54
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Panel Insulating
Bushings for
Bulkhead Jacks
MaterialNylon
Note: Can not be used with single
crimp bulkhead jacks.
Part No. 330620 (2 Required)
14.73±0.13
[.580±.005]
Dia.
14.1±0.08
[.555±.003]
13.95
[.549]
Dia.
14.58
[.574]
5.46
[.215]
0.89
[.035]
0.81
[.032]
12.93
[.509]
Dia.
17.45
[.687]
Dia. Recommended Panel Cutout
Dia.
BNC Connectors, 50 Ohm (Continued)
HL
Max.
Bulkhead Jacks,
Crimp (Continued)
Note: Panel Insulating Bushings
at the bottom of this page
Single Crimp Hex and O Crimp
Interchangeable Dies
CERTI-CRIMP for PRO-CRIMPER Interchangeable
RG/U Termination Center Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand
Cable Type Contact Plating Dielectric Style Lwith or Tool 69710-1 Part No.
Plating Integral Die PRO-CRIMPER & 626 Pneu.
Adapter 679304-1 Head 318161-1
58, 58A,
58B, 58C,
BELDEN 88240, Hex Crimp Gold Nickel Polymethyl- Commercial 36.83 58436-1 5413771-1
BERK-TEK pentene 1.450
BTDC-58,
COMM/SCOPE 2135
O Crimp Gold Nickel Polypro- Commercial 34.93 220187-1 58435-11220217-1 5228980-5
pylene 1.375
58, 58A, O Crimp Gold Nickel
PTFE
MIL Type 41.28 91901-1 69727-5225398-1
58B, 58C 1.625
Single Crimp Gold Silver
PTFE
MIL Type 32.13 91904-4 69223-1 2-5329456-1
1.265
223, O Crimp Gold Nickel
PTFE
MIL Type 35.71 91901-1 69727-5225398-3
55, 55A, 55B 1.406
142, 142A, O Crimp Gold Nickel
PTFE
MIL Type 35.71 91901-1 69727-5225398-6
142B, 400 1.406
124, 140, 210,
62, 62A, 62B,
59, 59A, 59B, O Crimp Gold Nickel Polypro- Commercial 34.93 220187-2 58435-11220217-2 5228980-6
BELDEN 9291, pylene 1.375
9209, 9269
1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1.
H
L
Max.
11.04
[.435]
Min.
12.82
[.505]
Dia. Min.
12.83
[.505 ]
+0.13
-0.00
+.005
-.000
Recommended
Panel Cutouts
Maximum Panel
Thickness 3.18 [.125]
H = 11/16" across flats, 20.32 [.800] Max. across points
Dia.
5.54
[.218 ]
+0.08
-0.00
+.003
-.000
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
BELDEN is a trademark of Belden Wire
and Cable Company.
BERK-TEK is a trademark of Nexans, Inc.
COMM/SCOPE is a trademark of
Commscope, Inc.
BNC Connectors, 50 Ohm (Continued)
W
Dia. Max.
L
Max.
3/8" - 32
Thread
Accepts 1.5 [.059]
Dia. Max. Wire
Bulkhead Solder Jacks,
Front Mount
Body Plating Nickel
Without Solder Terminal
W
Dia. Max.
L
Max.
3/8" - 32
Thread
Accepts 1.5 [.059]
Dia. Max. Wire
22.23
[.875]
With Solder Terminal
Recommended Panel Cutout
.396/4.04
[.156/.159]
9.65/9.75
[.380/.384]
Dia.
Dimensions Panel Insulating Part No.
Contact Dielectric LW
Thickness Bushing Without Solder With Solder
Material Terminal* Terminal**
Silver VALOX 26.93 13.09 1.17-3.18 227223-1 or 5227754-3 5227755-3
1.060 .515 .046-.125 221951-1
33.33 13.09 1.17-6.35 227223-1 or 5227169-7
VALOX 1.312 .515 .046-.250 221951-1
26.93 13.09 1.17-3.18 227223-1 or 5227754-2 5227755-2
Gold 1.060 .515 .046-.125 221951-1
33.33 13.09 1.17-6.35 227223-1 or 5227169-4 5227169-8
PTFE
1.312 .515 .046-.250 221951-1
26.93 13.09 1.17-3.18 227223-1 or 5227715-3 5227716-3
1.060 .515 .046-.125 221951-1
33.33 13.09 1.17-6.35 227223-1 or 5227169-5
Tin VALOX 1.312 .515 .046-.250 221951-1
26.93 13.09 1.17-3.18 227223-1 or 5227754-1 5227755-1
1.060 .515 .046-.125 221951-1
**Includes lockwasher and jam nut.
**Includes solder terminal and jam nut.
Plugs, for JIS Cables, Crimp
Plating
Body — Nickel
Center Contact — Gold
14.53
[.572]
Dia. Max.
L
Max.
Interchangeable Dies
for PRO-CRIMPER
Termination Dim. Hand Tool 354940-1 Part No.JIS Cable Type Dielectric Lor
PRO-CRIMPER
Adapter 679304-1
3D-2V Hex Crimp Polyethylene 33.53 58436-1 3-5221128-1
1.320
55
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
VALOX is a trademark of General Electric
Company.
Insulating Bushings
Recommended
Panel Cutout
Recommended
Panel Cutout
1.78
[.070]
0.81
[.032]
12.7
[.500]
Dia.
3.94
[.155]
11.94
[.470]
11.43
[.450]
9.53
[.375]
Part No. 221951-1
Part No. 227223-1
12.83 ±0.08
[.505 ±.003]
Dia.
12.07±0.08
[.475 ±.003]
11.56 ±0.08
[.455 ±.003]
Dia.
10.97 ±0.06
[.432 ±.003]
0.94
[.030]
Max.
Dia.
15.88
[.625] Dia. 9.53
[.375] Dia.
10.93
[.430] Dia.
4.04
[.159] Max.
1.09
[.043] Max.
14.86
[.585] Dia.
56
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
12.83
[.505]
Max.
3/8" - 24 Thread
26.80
[1.055]
Max.
Isolated Bulkhead Solder Jacks,
Front Mount
Plating
BodyNickel
Dielectric
White
VALOX
Panel Thickness 1.17-6.35 [.046-.250]
Recommended
Panel Cutout
31.75
[1.250]
13.09 Dia.
[.515] Max.
3/8" - 24
Thread
Accepts
1.5 [.059]
DIa. Max.
Wire
Panel Thickness 1.17-3.18 [.046-.125]
Recommended
Panel Cutout
Part No. 5414194-1
Plating
BodyNickel
Center Contact Silver
Dielectric
Black
VALOX
Flange & Thread Material
Black
VALOX
Center Flange & Part
Contact Thread No.
Plating Material
TinVALOX 5227726-1
Silver VALOX 5227726-2
Gold VALOX 5227726-3
Max.
9.91
[.390 ]
+0.13
-0.20
+.005
-.000
Dia.
3.89
[.153 ]
+0.08
-0.00
+.003
-.000
9.60
[.378 ]
+0.08
-0.00
+.003
-.000
Dia.
3.94
[.155 ]
+0.08
-0.00
+.003
-.000
Sealed Bulkhead Solder Jack,
Rear Mount
Part No. 5227426-1
17.78 Dia.
[.700] Max.
31.75
[1.250] Maximum Panel Thickness 6.35 [.250]
Recommended
Panel Cutout
1/2" - 28
Thread
Rubber
Gasket
Accepts .
1.5 [.059]
DIa. Max.
Wire
12.83
[.505 ]
+0.13
-0.00
+.005
-.000
Dia.
5.54
[.218 ]
+0.08
-0.00
+.003
-.000
Max.
Plating
BodyNickel
Center Contact Gold
Dielectric
Polymethylpentene
This connector is designed to prevent
moisture from entering the interface
from the rear of the connector.
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
VALOX is a trademark of General Electric
Company.
57
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
C
L
C
L
Recommended PC Board Layouts
Without Mounting Posts With Mounting Posts
(Top View)
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
10.16 ±0.08
[.400 ±.003]
5.08 ±0.05
[.200 ±.002]
2.54 ±0.05
[.100 ±.002]
GS 0.89 ±0.08
[.035 ±.003]
2.64 [.104] Dia.
Clearance Hole for
2-56 Self-Tapping Screw*
(2 Holes)
5.08 ±0.05
[.200 ±.002]
2.01 ±0.05
[.079 ±.002]
(2 Holes)
Mating
Face
Right-Angle Jacks
PC Board/Panel Mount
BodyNickel
Dielectric
Polymethylpentene
AB34.93
[1.375]
C
Mtg. Hgt.
1/2-28 Thread 1/2-28 Thread
VALOX Body
AB34.93
[1.375]
Metal Body
C
Mtg. Hgt.
(Top View)
10.16 ±0.08
[.400 ±.003]
5.08 ±0.05
[.200 ±.002]
2.54 ±0.05
[.100 ±.002]
GS 0.89 ±0.08
[.035 ±.003]
5.08 ±0.05
[.200 ±.002]Mating
Face
Body Center Dimensions Part No.
Contact Without With LWith L
Material Plating ABC
Mounting Posts Mounting Posts Compliant Posts
Tin 8.59 21.21 15.88 5226990-1 5227161-1 3.48 ——
.338 .835 .625 .137
VALOX, Gold1 8.59 21.21 15.88 5226990-3 5227161-3 3.48 ——
White .338 .835 .625 .137
Gold1 6.91 21.21 13.18 5227161-7 3.48 ——
.272 .835 .519 .137
Tin 8.59 21.21 15.88 5227161-2 3.48 ——
.338 .835 .625 .137
Gold1 8.59 21.21 15.88 5226990-6 5227161-6 3.48 ——
VALOX, .338 .835 .625 .137
Black Gold1 6.91 21.21 13.18 5227161-9 3.48 ——
.272 .835 .519 .137
Gold1 6.17 21.21 11.68 5415046-1 ——
.243 .835 .460
Tin 8.26 20.83 15.88 5227661-1 3.48 ——
.325 .820 .625 .137
Gold1 8.26 20.83 15.88 5227676-1 5227677-1 3.48 ——
Metal .325 .820 .625 .137
Gold1 6.91 20.83 12.70 1274668-1 5413879-1 3.48 ——
.272 .820 .500 .137
Gold2 6.91 20.83 12.70 5413879-2 3.48 ——
.272 .820 .500 .137
High Temp. Gold1 6.91 21.21 13.18 ——5415218-5 2.79
Housing .272 .835 .519 .110
Plating:
Gold1 0.00076 [.000030] thick
Gold2 0.00127 [.000050] thick
Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54.
Mounting Post Style
Compliant Post
12.83
[.505 ]
+0.13
-0.00
+.005
-.000
Dia.
Dia.
5.54
[.218 ]
+0.08
-0.00
+.003
-.000
L
Lockwasher and Jam Nut
Part No.
1-329632-2 Part No.
1-329631-2
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
VALOX is a trademark of General Electric
Company.
58
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Vertical Jacks
PC Board/Panel Mount
Plating
BodyNickel
Dielectric
Polymethylpentene
10.16 ±0.08
[.400 ±.003]
5.08 ±0.05
[.200 ±.002]
5.08 ±0.05
[.200 ±.002]
2.64 [.104] Dia.
Clearance Hole
for 2-56
Self-Tapping
Screw* (2 Holes)
2.54 ±0.05
[.100 ±.002]
0.89 ±0.08
[.035 ±.003]
GS
5.08 ±0.05
[.200 ±.002]
5.08 ±0.05
[.200 ±.002]
2.54 ±0.05
[.100 ±.002]
0.89 ±0.08
[.035 ±.003]
2.01 ±0.08
[.079 ±.003]
(2 Holes)
GS
(Top View) (Top View)
L
B
1/2-28 Thread
34.93
[1.375]
Mtg. Hgt.
15.88
[.625]
L
B
1/2-28 Thread
34.93
[1.375]
Mtg. Hgt.
15.88
[.625]
* Screw for board thickness of 2.38 [.093] or greater Part No. 221108-2.
Screw for thickness of less than 2.38 [.093] Part No. 221108-4.
Without Mounting Posts With Mounting Posts
10.16 ±0.08
[.400 ±.003]
10.16 ±0.08
[.400 ±.003]
10.16 ±0.08
[.400 ±.003]
VALOX Body Metal Body
Lockwasher and Jam Nut
Part No.
1-329632-2 Part No.
1-329631-2
Part No.
Body Center Dim. Dim. Without With
Material Contact BL
Mounting Mounting
Plating Posts Posts
Tin 21.21 3.48 5226993-1 5227222-1
VALOX, .835 .137
White Gold 21.21 3.48 5226993-3 5227222-3
.835 .137
Tin 21.21 3.48 5226993-2 5227222-2
VALOX, .835 .137
Black Gold 21.21 3.48 5226993-6 5227222-6
.835 .137
Tin 20.83 3.48 5227671-1
Metal .820 .137
Gold 20.83 3.48 5227673-1
.820 .137
Note: If an Insulating Bushing is required see part number 330620 and
Panel Cutout on page 54.
Recommended PC Board Layouts
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
12.83
[.505 ]
+0.13
-0.00
+.005
-.000
Dia.
Dia.
5.54
[.218 ]
+0.08
-0.00
+.003
-.000
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
VALOX is a trademark of General Electric
Company.
59
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
C
L
8.59
[.338]
34.93
[1.375]
21.21
[.835]
15.88 [.625]
Mounting Height
1/2-28 Thread
Jacks with
Mounting Flanges
PC Board/Panel Mount
(Top View)
2.54
[.100]
SG
11.43
[.450]
22.86 ±0.08
[.900 ±.003]
0.89 ±0.08
[.035 ±.003]
8.89
[.350]
3.3 [.130] Dia.
Clearance Hole
for 5-40 Screw
Lockwasher and Jam Nut
Part No.
1-329632-2 Part No.
1-329631-2
Mating
Face
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout Body Center Contact Part No.
Material Plating
VALOX, Tin 5226978-1
White Gold 5226978-3
Recommended PC Board Layout
12.83
[.505 ]
+0.13
-0.00
+.005
-.000
Dia.
Dia.
5.54
[.218 ]
+0.08
-0.00
+.003
-.000
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
VALOX is a trademark of General Electric
Company.
60
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Vertical Metalized Jacks
PC Board Mount
17.45
[.687]
15.88
[.625] Drill Holes for
0.94 ±0.05 [.037 ±.002]
Dia. Pin (5 Places)
6.35 ±0.05
[.250 ±.002]
12.7 ±0.08
[.500 ±.003]
6.35 ±0.05
[.250 ±.002]
12.7 ±0.08
[.500 ±.003]
3.73
[.147]
4.32
[.170]
1.07 ±0.05
[.042 ±.002]Dia.
1.73 ±0.05
[.068 ±.002]Dia.
6.48
[.255]
7.47
[.294]
Style D
Style A
Style C
6.88 ±0.05
[.271 ±.003]
3.43 ±0.05
[.135 ±.002]
6.88 ±0.05
[.271 ±.003]
1.32 ±0.08
[.052 ±.003]Dia.
2.44 ±0.08
[.096 ±.003]
(4 Holes)
Dia.
15.88
[.625]
16.64
[.655]
Body Center Leg
Plating Contact Plating Dielectric Style Length L Part No.
Silver VALOX A6.35 5227699-1
.250
Gold VALOX A6.35 5227699-2
.250
TinVALOX A6.35 5227699-3
Nickel .250
Gold VALOX A3.81 5414460-11
.150
Silver VALOX C4.45 5222420-1
.175
Gold VALOX E6.35 5415189-1
.250
Gold
PTFE
B3.30 5413969-2
.130
Tin-Lead Silver VALOX C3.18 5414305-1
.125
Gold VALOX D3.43 5221123-2
.135
1With .76 [.030] standoffs on top of legs.
Style B
L
L
Drill Hole
to Receive
0.940.06
[.037±.002]
Dia. Pin,
5 Required
12.70 0.08
[.500 ±.003]
12.70 0.08
[.500 ±.003]
6.35 ±0.06
[.250 ±.002]
Style E (Panel Mount)
L
20.57
[.810]
L
6.88 ±0.08
[.271 ±.003]
3.43 ±0.08
[.135 ±.003]
1.02 ±0.08
[.040 ±.003]Dia.
1.50 ±0.08
[.059 ±.003]
(4 Holes)
Dia. 3.44 ±0.08
[.135 ±.003]
6.88 ±0.08
[.271 ±.003]
Recommended PC Board Layouts
L
20.78 0.38
[.818 .015]
Sq.
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
VALOX is a trademark of General Electric
Company.
61
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Press Fit Vertical Metalized Jack,
PC Board Mount Insulating Bushing
MaterialPolypropylene
Part No. 222163-1
Only to be used on Part Nos. 5222006-1
& 5222462-1
Part No. 5222006-1
14.61
[.575]
1.02 ±0.08
[.040 ±.003]Dia.
6.88 ±0.05
[.271 ±.002]
3.43 ±0.05
[.135 ±.002]
6.88 ±0.05
[.271 ±.002]
20.57
[.810]
Max.
11.94 Dia.
[.470] Max.
Recommended PC Board Layout
PC Board Thickness Not Less Than 0.99 [.093]
Dia. 11.94
[.470] Dia.
2.96
[.115] Max.
6.61
[.260] Max.
1.5
[.059 ]
Dia.
4 Holes
+0.08
-0.10
+.003
-.004
Vertical Metalized Jacks,
PC Board Mount
24.00
[.945]
10.72 ± 0.25
[.422 ± .010]
10.70 ± 0.08
[.421 ± .003]
7.50 ± 0.08
[.295 ± .003]
1.00 ± 0.08
[.039 ± .003]
2 Plcs.
1.50 ± 0.08
[.059 ± .003]
2 Plcs.
3.00 ± 0.10
[.118 ± .004]
1.70 ± 0.10
[.067 ± .004]
2.50 ± 0.08
[.098 ± .003]
4 Plcs.
Signal Contact Hole
Switching
Contact
Hole
Part No. 1274314-1
(Switching)
24.00
[.945]
10.72 ± 0.25
[.422 ± .010]
Part No. 1274315-1
Recommended
PC Board Layout
10.70 ± 0.08
[.421 ± .003]
3.75 ± 0.08
[.148 ± .003]
1.00 ± 0.08
[.039 ± .003]
1.50 ± 0.08
[.059 ± .003]
2 Plcs.
3.00 ± 0.10
[.118 ± .004]
1.70 ± 0.10
[.067 ± .004]
2.50 ± 0.08
[.098 ± .003]
3 Plcs.
Recommended
PC Board Layout
Body Contact Dielectric Part
Plating Plating No.
Tin Silver Polyphenylene 6274314-1
Tin Silver Polyphenylene 6274315-1
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
62
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Recommended PC Board Layout
6.6 ±0.08
[.260 ±.003]
6.6 ±0.08
[.260 ±.003]
3.3 ±0.08
[.130 ±.003]
1.17 ±0.08
[.046 ±.003]
2.11 ±0.08
[.083 ±.003]
Dia.
(4 holes)
Maximum PC Board Thickness 2.54 [.100]
Dia.
C
L
6.15
[.242]
10.97 [.432]
Mounting Height
27.64 ±0.51
[1.088 ±.020]
Right-Angle Metalized Jacks,
PC Board Mount
Body Dielectric Center Part
Plating Contact Length No.
Nickel Polymethyl- 4.34 5413631-1*
pentene .171
Tin
PTFE
4.34 5413631-2*
.171
Nickel Polymethyl- 3.33 5413631-3*
pentene .131
Body Dielectric Contact Part
No.
Nickel TPX Gold 5414373-1
Recommended PC Board Layouts
1.19 ±0.18
[.047 ±.007]Dia.
7.62 ±0.08
[.300 ±.003]
1.78 ±0.08
[.070 ±.003]
Dia.
2 Holes
7.62 ±0.08
[.300 ±.003]
3.81 ±0.08
[.150 ±.003]
8.64
[.340]
21.85
[.860] 25.40
[1.000]
Right-Angle Metalized Jacks,
PC Board/Panel Mount
Body Part
Plating Dielectric No.
Tin
PTFE
5415025-2
Tin TPX 5415025-1
Lockwasher and Jam Nut see page 59.
6.6 ±0.08
[.260 ±.003]
6.6 ±0.08
[.260 ±.003]
3.3 ±0.08
[.130 ±.003]
1.17 ±0.08
[.046 ±.003]
2.11 ±0.08
[.083 ±.003]
4 holes
Dia.
Dia.
12.83
[.505 ]
+0.13
-0.00
+.005
-.000
Dia.
Dia.
5.64
[.222 ]
+0.08
-0.00
+.003
-.000
Maximum Panel Thickness 6.35 [.250]
Recommended Panel Cutout
1/2-28 Thread
27.64 ± 0.51
[1.088 ±.020]
10.97 ± 0.18
[.432 ±.007]
6.15 ± 0.25
[.242 ±.010]
11.66
[.459]
4.34
[.171]
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
TPX is a trademark of Mitsui Chemicals
America, Inc.
63
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Tee Adapter
Covers
MaterialPolypropylene, general
purpose
F
5.08
[.200]
15.11
[.595]
114.55 ±0.76
[4.510 ±.030]
Color
Black
Ivory
Part
No.
221586-1
221586-3
D
E
Tee Adapters Style A
(Jack-Plug-Jack) Style B
With Insulated
Cover
(Jack-Plug-Jack)
Insulation Material
Polyphenylene oxide
Style C
(Jack-Jack-Jack)
E
D
F
E
D
Body Center Contact Dimensions Comparable Packaging
Style Material Material Dielectric UG/U No. Part No.
and Plating and Plating DE F
Connector Per Pkg.
Brass, BE CU, Gold 32.54 26.19 14.27 Bulk
Nickel (30)2
PTFE
1.281 1.031 .562 274A (100) 221543-2
PH BR, Gold 33.02 27.31 14.50 Bulk
(15)2Acetal 1.300 1.075 .571 (100) 5413592-2
ABE CU, Gold 33.02 27.31 14.50 Bulk
Zinc, (30)2Acetal 1.300 1.075 .571 (100) 5413592-6
Nickel PH BR, Gold 33.02 27.31 14.50 Individual
(15)2Acetal 1.300 1.075 .571 (1) 35413592-9
BE CU, Silver 33.02 27.31 14.50 Individual
(200)2Acetal 1.300 1.075 .571 (1) 1-5413592-1
BZinc, BE CU, Gold Acetal 32.54 31.12 17.15 1Bulk
Nickel (30)21.281 1.225 .675 (100) 5413366-21
Brass, BE CU, Silver 32.54 23.37 Bulk
CNickel (200)2
PTFE
1.281 .920 —— (100) 221988-1
Zinc, PH BR, Gold 32.54 23.62 Bulk
Nickel (50)2Acetal 1.281 .930 —— (100) 5414311-1
1Gray insulation cover
2(Microinches min thickness)
3(Special graphics)
Dia.
Dia.
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
64
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
35.81
[1.410]
32.54
[1.281]
Right-Angle Adapters
(Jack-Plug)
26.97
[1.062]
Bulkhead Jack-Jack
Adapters
L
Max.
H
Max.
Recommended Panel Cutout
H= 11/16 across flats, 20.32 [.800] across points.
36.07
[1.420]
15.87
[.625]
22.89
[.901]
Max.
14.53 Dia
[.572] Max.
Isolated Bulkhead Jack-Jack
Adapter
Body Center
Contact Dielectric Part No.
Plating Plating
Nickel Gold Polymethylpentene 5414105-1
Body Center Dimensions
Contact Dielectric Part No.
Plating Plating HL
Nickel Silver 17.45 38.10
PTFE
330024-
.687 1.500
Nickel Gold1 17.78 36.07 Poly- 5228226-1
.700 1.420 ethylene
Nickel Gold2 17.78 36.07 Poly- 5228226-3
.700 1.420 ethylene
Plating:
Gold1 0.00127 [.000050] thick Gold2 0.00076 [.000015] thick
Note: If an Insulating Bushing is required see part number 330620 and
Panel Cutout on page 54.
Body Center
Contact Dielectric Part No.
Plating Plating
Nickel Silver
PTFE
5329517-1
Nickel Gold
PTFE
5222165-2
Nickel Gold Polymethylpentene 5414666-1
12.83
[.505 ]
+0.13
-0.00
+.005
-.000
Dia.
5.54
[.218 ]
+0.06
-0.00
+.003
-.000
Recommended Panel Cutout
H= 11/16 across flats, 20.32 [.800] across points.
12.83
[.505 ]
+0.13
-0.00
+.005
-.000
Dia.
Dia.
5.54
[.218 ]
+0.06
-0.00
+.003
-.000
Jack-Jack Adapters
Style A
Body Center
Contact Dielectric Style Part No.
Plating Plating
Nickel Silver
PTFE
A221551-1
Nickel Gold
PTFE
A221551-3
Nickel Gold Polymethyl- B5414414-1
pentene
Style B
Plug-Plug Adapter
31.8
[1.252] Ref.
Contact Body Part No.
Plating Plating
Gold Nickel 415796-1
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
65
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Jack Covers
101.6
[4.000]
#6 Stud Size
22.10
[.870] 14.53 Dia.
[.572] Max.
Body Plating Part No.
Silver 330022
Nickel 1-330022-2
Max.
14.53 Dia.
[.572] Max. 33.02
[1.300]
#6 Stud Size
Tether
Terminator Plugs
50, 75, 93 Ohm
Plating
BodyNickel
Center Contact Gold
Dielectric Polyethylene
Insulated
Terminators
Insulation Material
Polyphenylene oxide
Long Cover
Short Cover*
38.10
[1.500]
17.40
[.685]
17.40
[.685]
Register Color Cover Part
Specification Style No.
Gray Long 5413557-1
1 Watt, 50 Ohm Short 5413364-2
Black Long 5413557-2
* The Short Cover is required when mating the Terminator with a Tee Adapter.
Resistor Part No.
Specification With Tether Without Tether
1 Watt, 50 Ohm 5221629-115221629-4
1 Watt, 75 Ohm 5221629-215221629-5
1 Watt, 93 Ohm 5221629-6
0.5 Watt, 75 Ohm
1 Watt, 50 Ohm 1-5221629-61
1Tether is conductive with #4 stud size
Max. 38.10
[1.500] Max.
Shorting Caps
Plating
BodyNickel
Center Contact Gold
Part No. 413453-1
15.24
[.600]
14.53
[.572]
Dia. Max.
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
66
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm
Plugs, Crimp
These connectors have been designed
for optimum performance and have a
true 75 ohm impedance the complete
length of the connector. The crimp die
tooling listed below is different from the
equivalent 50 ohm connectors.
Plugs
Interchangeable
Dies for Interchangeable
RG/U Termination Center Body Dim. PRO-CRIMPER Dies for Hand
Contact Dielectric Style Hand Tool Tool 69710-1 Part No.
Cable Type Plating Plating L 354940-1 or & 626 Pneu.
PRO-CRIMPER Head 318161-1
Adapter 679304-1
179, 179A, Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-2 5413589-8
179B, 187, 1.160
187A, 161, O Crimp Gold Nickel Polyethelene Commercial 35.56 318451-2 5221185-8
BELDEN 9221 1.140
Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-2 1-5413589-0
AT&T 735A 1.160
O Crimp Gold Nickel Polyethelene Commercial 27.69 58174-1 58248-3 1-5221185-8
1.090
Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-2 5413589-3
BELDEN 8218 1.160
O Crimp Gold Nickel Polyethelene Commercial 27.69 58174-1 58248-3 5221185-3
1.090
140, 210, 62, 62A, Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-1 5413589-2
62B, 59, 59A, 59B, 1.160
BELDEN 9291, O Crimp Gold Nickel Polyethelene Commercial 27.69 58536-1 58248-2 5221185-2
9209, 9269 1.090
302, BELDEN 89269,
88241, Hi-Temp 62A, Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-1 5413589-1
Times PL-62, Berk Tek 1.160
BTDC-59, BTDC-62
BELDEN 8212, 9104, 29.46
9112, 9167, 9240, 9259, Hex Crimp Gold Nickel Polyethelene Commercial 1.160 58425-1 5413589-9
9266, Times FM-59,
(RG 59 Type 27.69
with 20 AWG C.C.) O Crimp Gold Nickel Polyethelene Commercial 1.090 58536-1 58248-2 5221185-9
Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-1 5413589-7
BELDEN 9145, 1.160
AT&T 734A O Crimp Gold Nickel Polyethelene Commercial 27.69 58536-1 1-5221185-0
1.090
BELDEN 9248, O Crimp Gold Nickel Polyethelene Commercial 25.65 58536-1 5221185-1
9114 1.010
6, 6A O Crimp Gold Nickel Polyethelene Commercial 37.85 58538-1 58248-1 5221185-7
1.490
BELDEN 8281, Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-3 5413589-5
9141, 9231, 1.160
Western
Electric 724, O Crimp Gold Nickel Polyethelene Commercial 28.45 58538-1 58248-1 5221185-5
728, 3049 1.120
COMM/SCOPE O Crimp Gold Nickel Polyethelene Commercial 28.96 58536-1 2-5221185-9
S59 Hec 1.140
COMM/SCOPE O Crimp Gold Nickel Polyethelene Commercial 28.96 58536-1 3-5221185-1
F59 Hec-z 1.140
L
Max.
14.53
[.572]
Dia. Max.
Hex and O Crimp
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
AT&T is a trademark of AT&T Corporation.
BELDEN is a trademark of Belden Wire
and Cable Company.
COMM/SCOPE is a trademark of
Commscope, Inc.
67
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Plugs for JIS Cables, Crimp
Plating
BodyNickel
Center Contact Gold
Bulkhead Jacks for JIS
Cables, Crimp
Plating
BodyNickel
Center Contact Gold
Dielectric Polymethylpentene
14.53
[.572]
Dia. Max.
L
Max.
Interchangeable Dies
for PRO-CRIMPER
Termination Dim. Hand Tool 354940-1 Part No.JIS Cable Type Dielectric Lor
PRO-CRIMPER
Adapter 679304-1
3C-2V Hex Crimp Polymethylpentene 29.46 58425-1 1-5413589-1
1.160
2.5C-2V Hex Crimp Polymethylpentene 29.46 58425-2 1-5413589-6
1.160
Interchangeable Dies
for PRO-CRIMPER
Termination Dim. Hand Tool 354940-1 Part No.JIS Cable Type Dielectric Lor
PRO-CRIMPER
Adapter 679304-1
1.5C-2V Hex Crimp 7536.83 58425-2 5413590-4*
1.450
*Packaged in 100 pieces per bag.
20.32
[.800]
Max.
L
Max.
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
68
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
14.53 Dia.
[.572] Max.
L
Max.
27.18
[1.070]
Hex and O Crimp
Max.
Interchangeable
Dies for Interchangeable
RG/U Termination Center Body Dim. PRO-CRIMPER Dies for Hand
Contact Dielectric Style Hand Tool Tool 69710-1 Part No.
Cable Type Plating Plating L 354940-1 or & 626 Pneu.
PRO-CRIMPER Head 318161-1
Adapter 679304-1
179, 179A,
179B, 187, Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 58425-2 -5413588-8
187A, 161 pentene 1.553
BELDEN 9221
AT&T 735A Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 58425-2 1-5413588-0
pentene 1.553
AT&T KS
19224 L2, Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 58425-2 5413588-4
RD179 pentene 1.553
Double Braid
140, 210, 62, Hex Crimp Gold Nickel Polymethyl- Commercial 139.45 58425-1 5413588-2
62A, 62B, 59, pentene 1.553
59A, 59B,
BELDEN 9291, O Crimp Gold Nickel Polymethyl- Commercial 39.88 58536-1 58248-2 -5221402-2
9209, 9269 pentene 1.570
BELDEN 8212,
9104, 9112,
9240, 9167,
9259, 9266, Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 58425-1 5413588-9
Times FM-59, pentene 1.553
(RG 59 Type
with 20
AWG C.C.)
BELDEN 9145, O Crimp Gold Nickel Polymethyl- Commercial 39.88 58536-1 5221402-4
AT&T 734A pentene 1.570
Right-Angle Plugs, Crimp
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
AT&T is a trademark of AT&T Corporation.
BELDEN is a trademark of Belden Wire
and Cable Company.
69
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Interchangeable
Dies for Interchangeable
RG/U Termination Center Body Dim. PRO-CRIMPER Dies for Hand
Contact Dielectric Style Hand Tool Tool 69710-1 Part No.
Cable Type Plating Plating L 354940-1 or & 626 Pneu.
PRO-CRIMPER Head 318161-1
Adapter 679304-1
179, 179A, Hex Crimp Gold Nickel Polyethelene Commercial 33.02 58425-2 5413760-8
179B, 161, 1.300
187, 187A, O Crimp Gold Nickel Polyethelene Commercial 30.48 318451-2 5221199-5
BELDEN 9221 1.200
BELDEN 8218 Hex Crimp Gold Nickel Polyethelene Commercial 33.02 58425-2 5413760-3
1.300
140, 210, 62,
62A, 62B, 59,
59A, 59B, O Crimp Gold Nickel Polyethelene Commercial 30.48 58536-1 58248-2 5221199-2
BELDEN 9291, 1.200
9209, 9269
302, BELDEN 88241,
89269, Hi-Temp
62A, Times Hex Crimp Gold Nickel Polyethelene Commercial 33.02 58425-1 5413760-1
PL-62, Berk 1.300
Tek BTDC-59,
BTDC-62
BELDEN 8212,
9104, 9112,
9240, 9167,
9259, 9266, Hex Crimp Gold Nickel Polyethelene Commercial 33.02 58425-1 5413760-9
Times FM-59, 1.300
(RG 59 Type
with 20
AWG C.C.)
BELDEN 9248, O Crimp Gold Nickel Polyethelene Commercial 30.48 58536-1 5221199-1
9114 1.200
Jacks, Crimp
L
Max.
Hex and O Crimp
11.08 Dia.
[.436] Max.
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
BELDEN is a trademark of Belden Wire
and Cable Company.
70
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
20.32
[.800]
Max.
34.93
[1.375]
Hex and O Crimp
Max.
12.83
[.505 ]
+0.13
-0.20
+.005
-.000
Dia.
5.54
[.218 ]
+0.08
-0.00
+.003
-.000
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
Interchangeable
Dies for Interchangeable
RG/U Termination Center Body Dim. PRO-CRIMPER Dies for Hand
Contact Dielectric Style Hand Tool Tool 69710-1 Part No.
Cable Type Plating Plating L 354940-1 or & 626 Pneu.
PRO-CRIMPER Head 318161-1
Adapter 679304-1
179, 179A, Hex Crimp Gold Nickel Polyethelene Commercial 36.83 58425-2 5413590-8
179B, 161, 1.450
187, 187A, O Crimp Gold Nickel Polyethelene Commercial 34.93 318451-2 5221221-5
BELDEN 9221 1.375
AT&T KS
19224 L2, Hex Crimp Gold Nickel Polyethelene Commercial 36.83 58425-2 5413590-4
RD179 1.450
Double Braid
Hex Crimp Gold Nickel Polyethelene Commercial 36.83 58425-2 5413590-3
BELDEN 8218 1.450
140, 210, 62,
62A, 62B, 59,
59A, 59B, O Crimp Gold Nickel Polyethelene Commercial 34.93 58536-1 58248-2 5221221-2
BELDEN 9291, 1.375
9209, 9269
BELDEN 8212,
9104, 9112, 9240,
9167, 9259, 9266, O Crimp Gold Nickel Polyethelene Commercial 34.93 58536-1 58248-2 5221221-7
Times FM-59 1.375
(RG 59 Type with
20 AWG C.C.)
BELDEN 9114, O Crimp Gold Nickel Polyethelene Commercial 34.93 58536-1 5221221-1
9248 1.375
Bulkhead Jacks, Crimp
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
AT&T is a trademark of AT&T Corporation.
BELDEN is a trademark of Belden Wire
and Cable Company.
71
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Bulkhead Solder Jacks
Front Mount
Plating
BodyNickel
Center Contact Silver
27.43
[1.083]
13.09 Dia.
[.515] Max.
Maximum Panel Thickness 3.18 [.125]
Recommended Panel Cutout
9.75/9.65
[.384./380]
Dia.
4.04/3.96
[.159/.156]
Part No. 5221244-1
(with Solder Terminal)
Bulkhead Solder Jack
Rear Mount
Lockwasher and Jam Nut see page 73.
Plating
BodyNickel
Center Contact Gold
Dielectric
Polymethylpentene
Bulkhead Jack
PC Board Mount
Accepts
.054 Dia.
Max. Wire
Part No. 5415187-1
(without Solder Terminal)
3/8-32 Thread
Part No. 5414217-1
17.78 Dia.
[.700] Max.
31.75
[1.250]
1/2-28 Thread
Accepts .
.050 Dia.
Max. WIre
Max.
Max.
12.83
[.505 ]
+0.13
-0.00
+.005
-.000
Dia.
5.54
[.218 ]
+0.08
-0.00
+.003
-.000
Maximum Panel Thickness 6.35 [.250]
Recommended Panel Cutout
13.09
[.515]
Dia.
Max.
27.43
[1.083] Max.
Accepts
.054 Dia.
Max. Wire
3/8-32 Thread
20.8
[.820]
11.07
[.436] Max.
3.30
[.130]
Ø 12.70 ± 0.1
[.500 ± .004]
11.2 ± 0.1
[.441 ± .004]
Part No. 6274086-1
Note: If insulating bushing required
use part no. 227223-1 or 221951-1
(for details, reference page 55).
Note: If insulating bushing required
use part no. 227223-1 or 221951-1
(for details, reference page 55).
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
72
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Body Center Dimensions Part No.
Contact Without With
Material Plating ABCL
Mounting Posts Mounting Posts
VALOX, Black w/ 6.17 21.21 11.68 2.79 *
Compliant Posts Gold3 .243 .835 .460 .110 5415105-2
(Economy)*
VALOX, 6.17 21.21 11.68 4.01 *
Black Gold3 .243 .835 .460 .158 5415105-1
(Economy)*
VALOX, Gold1 6.91 21.21 13.88 3.48 5413194-1
White .272 .835 .519 .137
VALOX, 6.91 21.21 13.88 3.48 *
White Gold1 .272 .835 .519 .137 5415634-2
(Economy)*
VALOX, Gold1 6.91 21.21 13.88 3.48 5413194-2
Black .272 .835 .519 .137
Gold1 6.91 21.21 13.88 3.48 5415634-1
VALOX, .272 .835 .519 .137
Black
Gold1 8.59 21.21 15.88 3.48 5415633-1
(Economy)* .338 .835 .625 .137
VALOX, Gold2 8.59 21.21 15.88 3.48 5414459-1
White .338 .835 .625 .137
Metal Gold1 8.25 20.83 15.88 2.16 5222092-1
.325 .820 .625 .085
Metal Gold1 8.25 20.83 15.88 5222093-1
.325 .820 .625
Metal Gold1 8.25 20.83 15.88 3.48 5414409-1
(Economy)* .325 .820 .625 .137
Metal with Gold1 6.91 20.83 12.70 3.48 5415417-1
Compliant .272 .820 .500 .137
Posts Tin 8.56 21.21 15.88 3.48 5415419-1
(Economy)* .337 .835 .625 .137
Metal Gold1 8.25 20.83 15.88 3.48 5222092-3
.325 .820 .625 .137
Metal Gold1 6.91 20.83 12.70 3.48 5414907-1
.272 .820 .500 .137
Metal Gold1 6.91 20.83 12.70 6274072-1
.272 .820 .500
Metal Gold1 6.91 20.83 12.70 3.48 6274084-1
(Economy)* .272 .820 .500 .137
**Economy connector uses 50 part with smaller dielectric and stamped and formed con-
tact, Phosphor Bronze contact material (Compare to regular connector which is 75 ,
screw machined Beryllium Copper).
Plating:
Gold1 0.00076 [.000030] thick
Gold2 0.00127 [.000050] thick
Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on
page 54.
C
L
C
L
Recommended PC Board Layouts
Right-Angle Jacks
PC Board/Panel Mount
Outer Shell Nickel
Dielectric Polymethylpentene
Lockwasher and Jam Nut see page 73.
AB34.93
[1.375]
C
Mtg. Hgt.
1/2-28 Threads 1/2-28 Threads
VALOX Body
AB34.93
[1.375]
Metal Body
C
Mtg. Hgt.
L
* Screw for panel thickness of 2.38
[3/32] or greater
* Part No. 221108-2.
* Screw for panel thickness of less
than 2.38 [3/32]
* Part No. 221108-4.
Without Mounting Posts
With Mounting Posts
(Top View)
10.16 ±0.08
[.400 ±.003]
5.08 ±0.05
[.200 ±.002]
2.54 ±0.05
[.100 ±.002]
GS 0.89 ±0.08
[.035 ±.003]
2.64 [.104] Dia.
Clearance Hole for
2-56 Self-Tapping Screw*
(2 Holes)
5.08 ±0.05
[.200 ±.002]
2.01 ±0.08
[.079 ±.003]
(2 Holes)
Mating
Face
(Top View)
10.16 ±0.08
[.400 ±.003]
5.08 ±0.05
[.200 ±.002]
2.54 ±0.05
[.100 ±.002]
GS 0.89 ±0.08
[.035 ±.003]
5.08 ±0.05
[.200 ±.002]Mating
Face
12.83
[.505 ]
+0.13
-0.00
+.005
-.000
Dia.
5.54
[.218 ]
+0.13
-0.00
+.005
-.000
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
VALOX is a trademark of General Electric
Company.
73
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Vertical Jacks
PC Board/Panel Mount
Plating
Outer Shell Nickel
Dielectric Polymethylpentene
VALOX Body Metal Body
Recommended PC Board Layout
L
B34.93
[1.375]
Mtg. Hgt.
15.88
[.625]
1/2-28 Thread
L
B34.93
[1.375]
Mtg. Hgt.
15.88
[.625]
1/2-28 Thread
Body Contact Dim. Dim. Part No.
Material Plating B L
VALOX,
Black Gold1 21.21 3.48 5415632-1
(Economy)* .835 .137
VALOX,
White Gold1 21.21 3.48 5415632-2
(Economy)* .835 .137
Metal Gold1 20.83 3.48 5222132-1
.820 .137
Metal Tin 21.21 3.48 5415520-1
(Economy)* .835 .137
*Economy connector uses 50 part with smaller dielectric and stamped and
formed contact, Phosphor Bronze contact material (Compare to regular
connector which is 75 , screw machined Beryllium Copper).
Plating:
Gold1 0.00076 [.000030] thick
Note: If an Insulating Bushing is required see part number 330620 and
Panel Cutout on page 54.
Lockwasher and Jam Nut
Part No.
1-329632-2 Part No.
1-329631-2
12.83
[.505 ]
+0.13
-0.00
+.005
-.000
Dia.
5.54
[.218 ]
+0.13
-0.00
+.005
-.000
5.08 ±0.05
[.200 ±.002]
5.08 ±0.05
[.200 ±.002]
2.54 ±0.05
[.100 ±.002]
0.89 ±0.08
[.035 ±.003]
2.01 ±0.08
[.079 ±.003]
(2 Holes)
GS
(Top View)
10.16 ±0.08
[.400 ±.003]
10.16 ±0.08
[.400 ±.003]
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
* Screw for panel thickness of 2.38
[3/32] or greater
* Part No. 221108-2.
* Screw for panel thickness of less
than 2.38 [3/32]
* Part No. 221108-4.
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
VALOX is a trademark of General Electric
Company.
74
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Vertical Metalized Jacks
PC Board Mount
Plating
Dielectric PTFE
A Max.
11.49
[.470]
Dia.
Max.
Recommended PC Board Layout
Style A Style B Style C
Body Center Leg
Contact Style Length Part No.
Plating Plating L
Nickel Gold B 3.30 6274291-2
.130
Tin Gold B 3.30 6274291-1
.130
Tin Gold B 6.35 6274359-1
.250
Tin Gold C 4.44 5414394-1
.175
Nickel Silver A 6.35 5413986-1
.250
Tin Gold F 2.54 6274360-1
.100
6.88 ±0.05
[.271 ±.002]
6.88 ±0.1
[.271 +.003]
–.004 1.5 ±0.1
[.059 +.004]
–.003
3.43 ±0.05
[.135 ±.002]
Recommended PC Board Layout
17.45
[.687]
15.88
[.625]
LL
Press Fit
Vertical Metalized Jacks
PC Board Mount
Dim. Part
ANo.
20.57 5222462-1
.810
16.26 5414088-1
.640
20.57
[.810]
L
Drill Holes for
0.94 ±0.05 [.037 ±.002 ]
Dia. Pin (5 Places)
6.35 ±0.05
[.250 ±.002]
12.7 ±0.08
[.500 ±.003]
6.35 ±0.05
[.250 ±.002]
12.7 ±0.08
[.500 ±.003]
6.88 ±0.05
[.271 ±.003]
6.88 ±0.08
[.271 ±.003]
3.43 ±0.05
[.135 ±.002]
3.44 ±0.08
[.135 ±.003]
3.43 ±0.08
[.135 ±.003]
6.88 ±0.05
[.271 ±.003]
6.88 ±0.08
[.271 ±.003]
2.44 ±0.08
[.096 ±.003]
(4 Holes)
Dia.
1.32 ±0.08
[.052 ±.003]Dia.
(4 Plated-Thru
Holes)
Dia.
1.02 ±0.08
[.040 ±.003]
(Plated-Thru Hole)
Dia.
Insulating Bushing
MaterialNylon
Part No. 222163-1
Only to be used on Part Nos.
5222462-1 and 5222006-1
16.64
[.655]
Sq.
1.50 ±0.08
[.059 ±.003]
(4 Holes)
Dia.
1.02 ±0.08
[.040 ±.003]Dia.
2.96
[.115] Max.
6.61
[.260] Max.
14.61
[.575] Dia.
11.94
[.470]
Dia.
1.02 ± 0.08
[.040 ± .003]
5.16 ± 0.08
[.203 ± .003]
5.16 ± 0.08
[.203 ± .003]
2.578 ± 0.076
[.1015 ± .0030]
Dia.
2.06 ± 0.05
[.081 ± .002]
Dia.
4 Plcs.
2.54
[.100]
14.73
[.580]
5 Plcs.
Style F (Push-On)
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
3.81 ± 0.08
[.150 ± .003]1.19 ± 0.18
[.047 ± .007]
1.78 ± 0.08
[.070 ± .003]
7.62 ± 0.08
[.300 ± .003]
7.62 ± 0.08
[.300 ± .003]
Dia.
Dia.
25.40 ± 0.38
[1.000 ± .015]
11.43 ± 0.43
[.450 ± .017]
21.84
[.860]
17.78
[.700]
11.07
[.436] Max.
Part No. 6274127-1
75
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Recommended PC Board Layout
6.6 ±0.08
[.260 ±.003]
6.6 ±0.08
[.260 ±.003]
3.3 ±0.08
[.130 ±.003]
1.17 ±0.08
[.046 ±.003]
2.11 ±0.08
[.083 ±.003]
Dia.
(4 holes)
Maximum PC Board Thickness 2.54 [.100]
Dia.
Press Fit, Bulkhead
Vertical Metalized Jack
includes hardware
28.78
[1.133]
4.37 ± 0.51
[.172 ± .020]
5 Plcs.
24.41
[.961]
10.80
[.425]
+ 0.08
– 0.00
+ .003]
– .000
5.54
[.218
+ 0.13
– 0.00
+ .005]
– .000
ø 12.83
[ø .505
Part No. 6274124-2
Recommended
PC Board Layout
C
L6.15
[.242]
10.97
[.432]
Mounting
Height
28.4
[1.118] Max.
17.48
[.688] Sq.
15.88
[.625] Max.
1.7 ±0.05
[.067 ±.002]
(2 Places)
For Drive Screw 6.35 ±0.05
[.250 ±.002]
6.35 ±0.05
[.250 ±.002]
12.7 ±0.05
[.500 ±.002]
12.7 ±0.05
[.500 ±.002]
1.02 ±0.08
[.040 ±.003]
(Plated-Thru
Hole 3 Places)
Press Fit
Vertical Metalized Jacks
PC Board Mount
(Continued)
PC Board Thickness (Min.) Part No.
2.36 5221336-3
.093
3.17 5221336-4
.125
Recommended PC Board Layout
Body Contact Center Part No.
Plating Dielectric Plating Contact
Dimension
Nickel TPX Gold2 .171 [.007] 5413558-1
Tin
PTFE
Gold2 .171 [.007] 5413558-2
Nickel TPX Gold2 .131 [.005] 5413558-3
Nickel TPX Gold1 .171 [.007] 5413558-5
Gold1 0.00076 [.000030] thick
Gold2 0.00127 [.000050] thick
Dia.
Right-Angle Metalized Jacks
PC Board Mount
Ø 1.02 ± 0.08
[.040 ± .003]
3.43
[.135]
6.88
[.271]
3.43
[.135]
6.88
[.271]
Holes Plated
Through 5 Plcs.
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
TPX is a trademark of Mitsui Chemicals
America, Inc.
76
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
36.07
[1.420] Max.
Ø 15.88 ± 0.25
[.625 ± .010]
BNC Connectors, 75 Ohm (Continued)
Right-Angle Metalized
Jacks
PC Board/Panel Mount
Maximum Panel Thickness 6.35 [.250]
Recommended Panel Cutout
12.83+0.13
-0.00
[.505+.005]
-.000
Dia.
5.64+0.08
-0.00
[.222+.003]
-.000
12.83+0.13
-0.00
[.505+.005]
-.000
Dia.
5.54+0.08
-0.00
[.218+.003]
-.000
Part No. 5222117-1
36.07
[1.420]
11/16
Right-Angle Adapter
(Jack-Plug)
Plating
Body Nickel
Center Contact Gold
Dielectric
Polymethylpentene
22.89
[.901]
Max.
14.53
[.572]
26.97
[1.062]
Part No. 5415020-1
Maximum Panel Thickness 6.35 [.250]
Recommended Panel Cutout
12.83+0.13
-0.00
[.505+.005]
-.000
Dia.
5.54+0.08
-0.00
[.218+.003]
-.000
Recommended
Panel Cutout
Dia.
Max.
Bulkhead Jack-Jack
Adapter
Plating
Body Nickel
Center Contact Gold
Dielectric Polymethylpentene
Part No. 1274935-1
Jack-Jack Adapter
Plating
Body — Nickel
Center Contact — Gold
Dielectric — Polymethylpentene
Bulkhead Jack-Jack
Adapter
Plating
Body — Nickel
Center Contact — Gold
Dielectric — Polymethylpentene
Body
Plating Dielectric Part No.
Tin
PTFE
6274425-2
1/2-28 Thread
27.64 ± 0.51
[1.088 ±.020]
10.97 ± 0.18
[.432 ±.007]
6.15 ± 0.25
[.242 ±.010]
11.66
[.459]
4.34
[.171]
36.04
[1.419] Max.
Part No. 415567-1
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
77
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
8.89 ± 0.13
[.350 ± .005]
+ 0.13
– 0.00
+ .005
– .000
Ø 9.65
[.380 ]
Recommended Panel Cutout
Bulkhead Jack-Push On Plug
Adapter
41.92
[1.650]
Ø 14.35
[.565] Max.
Ø 8.43
[.332] Max.
Part No. 1274007-1
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.