EP / AP / SP SERIES HIGH POWER / LOUDSPEAKER CONNECTORS SP/EP/AP SERIES HIGH POWER / LOUDSPEAKER CONNECTORS The SP Series are available in 2 or 4 pole chassis mount connectors. The durable thermoplastic housings are fitted with high power contacts to ensure optimal current carrying capacity. Completely intermatable with industry standard loudspeaker connections. The EP Series incorporates a rugged zinc diecast shell to give it maximum durability when used in demanding situations. The EP cable connector cable flex relief design minimises cable bend stress at point of entry into the connector housing. The AP Series Shell is manufactured from tough, durable thermoplastic, and ideal for fixed indoor installations. Both the EP and AP Series utilise the same contact and insulator components. Features * High current contacts for distortion free signal. * Tough, durable zinc diecast shell for the EP series. * EP series cable clamp capable of supporting cables from 9mm (0.35") to 16mm (0.63") in diameter. * Quick release, vibration resistant latch lock. * AP & EP series are completely intermatable. Options * Solder termination / Tab or Printed Circuit Board versions, Screw Terminals (SP Series) * Nickel Plated Zinc Alloy shell (EP/SP Series) * Black finished Zinc Alloy shell (EP/SP Series) * Precision machined contacts * Thermoplastic shell (AP/SP Series) Ordering Codes We have listed the more common ordering codes in each section. Please contact us if you need any further assistance. * Cost effective durable thermoplastic shell for the AP and SP series. Simple steps to guide you in using this catalogue 1) Identify the product group listed in Contents on page 1 and go directly to that page number. 2) Each product group cover page then details information and options available. 3) Refer to the product detail pages and identify the product you require pictorially. 4) Read the product description column for the products standard features. 5) Use variations column to determine your choice. 6) Identify part number. 7) In the event the particular option you require is not listed please refer to the part number breakdown page at the end of each section. 8) Please contact us directly if you have any further problems. * EP series available in 3, 4, 5, 6 and 8 contact arrangements * AP series available in 4, 5, 6, and 8 contact arrangements. * SP series available in 2 and 4 contact arrangements. * SP Series with overmolded cable support boot or PG gland with or without cable support strain relief. 67 ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801 www.amphenolaudio.com EP / AP / SP SERIES SP SERIES LOUDSPEAKER CONNECTORS Amphenol's range of loudspeaker connectors have been further enhanced with the introduction of the SP Series. Designed to complement the popular EP/AP Series, we now offer a range of loudspeaker connectors to suit most applications. SP Series chassis connectors are available in industry standard PCB footprints with solder tabs. SP Series cable plugs are available with screw or solder terminals. Features: * Quick release, vibration resistant latch lock * 2 or 4 pole * Solder tabs, PCB Contacts, Solder or Screw Terminals * Chuck type or PG Gland cable clamp * Various mounting hole options * 30A Current rating * Thermoplastic or Metal housing (Cable Plugs) * Industry standard mating Part Number Breakdown: page 72 PCB Footprints: page 74 PRODUCT - FIGURE DRAWING Dimensions in mm (inches) Specifications: page 75 CONTACT SHELL TYPE COLOUR PART NUMBER 2 pole, Cable connector, Thermoplastic shell, Blue sleeve Screw Black SP-2-F Solder Black SP-2-FS 2 pole, Cable connector, Thermoplastic shell, Blue sleeve, PG Gland Screw Black SP-2-FG Solder Black SP-2-FSG 2 pole, Cable connector, Thermoplastic shell, Blue sleeve, PG Gland strain relief Screw Black SP-2-FL Solder Black SP-2-FSL 2 pole, Cable connector, Metal shell, Blue sleeve Screw Nickel SP-2-FN Solder Nickel SP-2-FNS Screw Black SP-2-FB Solder Black SP-2-FBS Screw Nickel SP-2-FNG Solder Nickel SP-2-FNSG Screw Black SP-2-FBG Solder Black SP-2-FBSG Screw Nickel SP-2-FNL Solder Nickel SP-2-FNSL Screw Black SP-2-FBL Solder Black SP-2-FBSL DESCRIPTION 2 pole, Cable connector, Metal shell, Blue sleeve, PG Gland 2 pole, Cable connector, Metal shell, Blue sleeve, PG Gland strain relief 68 ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801 www.amphenolaudio.com EP / AP / SP SERIES SP LOUDSPEAKER CONNECTORS PRODUCT - FIGURE DRAWING Dimensions in mm (inches) CONTACT SHELL TYPE COLOUR PART NUMBER 4 pole, Cable connector, Thermoplastic black shell, Blue sleeve Screw Black SP-4-F Solder Black SP-4-FS 4 pole, Cable connector, Thermoplastic black shell, Blue sleeve, PG Gland Screw Black SP-4-FG Solder Black SP-4-FSG 4 pole, Cable connector, Thermoplastic black shell, Blue sleeve, PG Gland strain relief Screw Black SP-4-FL Solder Black SP-4-FSL 4 pole, Cable connector, Metal shell, Blue sleeve Screw Nickel SP-4-FN Solder Nickel SP-4-FNS Screw Black SP-4-FB Solder Black SP-4-FBS Screw Nickel SP-4-FNG Solder Nickel SP-4-FNSG Screw Black SP-4-FBG Solder Black SP-4-FBSG Screw Nickel SP-4-FNL Solder Nickel SP-4-FNSL Screw Black SP-4-FBL Solder Black SP-4-FBSL DESCRIPTION 4 pole, Cable connector, Metal shell, Blue sleeve, PG Gland 4 pole, Cable connector, Metal shell, Blue sleeve, PG Gland strain relief 69 ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801 www.amphenolaudio.com EP / AP / SP SERIES SP LOUDSPEAKER CONNECTORS PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER 2 pole, D flange, Thru holes, Solder tabs 3/16" Black SP-2-MD 2 pole, D flange, Thru holes, Horizontal PCB Black SP-2-MDH 2 pole, D flange, Thru holes, Vertical PCB Black SP-2-MDV 4 pole, D flange, Thru holes, Solder tabs 3/16" Black SP-4-MD 4 pole, D flange, Thru holes, Solder tabs 3/16" Grey SP-4-MD-8 4 pole, D flange, Self Tapping holes, Solder tabs 3/16" Black SP-4-MDT 4 pole, D flange, Thru holes, Horizontal PCB Black SP-4-MDH 4 pole, D flange, Self Tapping holes, Horizontal PCB Grey SP-4-MDHT-8 70 ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801 www.amphenolaudio.com EP / AP / SP SERIES SP LOUDSPEAKER CONNECTORS PRODUCT - FIGURE DESCRIPTION VARIATIONS PART NUMBER 4 pole, D flange, Self Tapping holes, Horizontal PCB Black SP-4-MDHT 4 pole, D flange, Thru holes, Vertical PCB Black SP-4-MDV 4 pole, D flange, Thru holes, Vertical PCB Red SP-4-MDV-2 4 pole, D flange, Self Tapping holes, Vertical PCB Grey SP-4-MDVT-8 4 pole, EP flange, Thru holes, Solder tabs 3/16" Black SP-4-MC 71 ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801 www.amphenolaudio.com EP / AP / SP SERIES SP LOUDSPEAKER CONNECTORS PART NUMBER BREAKDOWN SP G - GI NG PA CK A L TY PE N S BA CK SH EL TI ON FI NI SH IN A L RM TE ND ER - 4 - F SH EL LA CT GE TA CO N SE R IE S PR E FI X YO UT S SP SERIES - CABLE CONNECTORS B E. G . SP-4-FNSG SP (Series Prefix), 4 contacts, F (Cable Connector), N (Metal Shell Nickel Finish), S (Solder Terminals), G (PG Gland) SERIES PREFIX SP = Series Prefix CONTACT LAYOUT 2 = 2 Contacts 4 = 4 Contacts GENDER F = Cable Connector SHELL FINISH Blank = Thermoplastic - Black N = Metal - Nickel Finish B = Metal - Black Finish Blank = Screw Terminals S = Solder Terminals Blank = Standard G = PG Gland L = PG Gland Strain Relief 1 = Brown 2 = Red 3 = Orange 4 = Yellow 5 = Green 6 = Blue 7 = Violet 8 = Grey 9 = White Blank = Individual Bags B = Bulk Packed TERMINATION BACKSHELL TYPE PACKAGING BACKSHELL COLOUR PACKAGING 72 ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801 www.amphenolaudio.com EP / AP / SP SERIES SP LOUDSPEAKER CONNECTORS PART NUMBER BREAKDOWN SP GI NG LA YO UT ND S ER SH EL L ST TE YL RM E IN A M OU TIO NT N IN G HO LE CO LO UR - 4 - M D H T - 8 PA CK A CT GE TA CO N SE R IE S PR E FI X SP SERIES - CHASSIS CONNECTORS B E. G . SP-4-MDHT-8B SP (Series Prefix),4 contacts, M(Chassis Connector), D (D Shell), Horizontal Printed Circuit Board, Self Tapping mounting holes - 8 (Grey), Bulk Packaged. SERIES PREFIX SP CONTACT LAYOUT 2 4 GENDER M SHELL STYLE D C TERMINATION Blank V H MOUNTING HOLE Blank T SHELL COLOUR Blank 2 8 PACKAGING Blank B = = = = = = = = = = = = = = = = Series Prefix 2 Contacts 4 Contacts Chassis Connector Standard `D' Type flange EP Series Circular flange Solder tabs - 3/16" terminals Vertical Printed Circuit Board Horizontal Printed Circuit Board Thru Hole Self Tapping Black Red Grey Individual Bags Bulk Packed 73 ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801 www.amphenolaudio.com EP / AP / SP SERIES SP LOUDSPEAKER CONNECTORS SP SERIES SP-2-MDH SP-4-MDH SP-4-MDHT-8 SP-4-MDHT SP-2-MDV SP-4-MDV SP-4-MDV-2 SP-4-MDVT-8 SP SERIES PANEL CUTOUT SP-2-MD**_* SP-4-MD**_* SP-4-MC 74 ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801 www.amphenolaudio.com EP / AP / SP SERIES SP LOUDSPEAKER CONNECTORS STANDARD DATA SP SERIES CONNECTORS VALUE GENERAL CHARACTERISTICS Number of contacts Termination (Chassis) Termination (Cable Plugs) ELECTRICAL CHARACTERISTICS 2 or 4 Printed Circuit Board (PCB) or Solder Tabs 3/16" Screw or Solder Terminals Flammability UL94HB Environmental Complies with EU RoHS 2 Directive 2011/65/EU 1) Service Voltage RMS 133V Test Voltage AC RMS 1500V Current carrying capacity 30A Typical Contact Resistance 3m Insulation Resistance (initial) 2G Insulation Resistance (after damp heat test) 1G CLIMATIC CHARACTERISTICS Protection Class MECHANICAL CHARACTERISTICS Weight** - Chassis Connectors 12g (0.026lb) Weight** - Cable Plug - Thermoplastic - Metal 44g (0.097lb) 65g (0.143lb) Weight** - Cable Plug PG - Thermoplastic - Metal 44g (0.097lb) 65g (0.143lb) Weight** - Cable Plug PG S/Relief - Thermoplastic - Metal 68g (0.150lb) 89g (0.196lb) Operating Temperature Typical Cable retention force Cable O.D range - Chuck Clamp - PG16 Gland - PG16 Gland S/Relief IP54 -25C to +75C (-13F to +167F) 200N (Subject to cable material and O.D.) 2 pole 5-10mm (0.19" - 0.39") 6-12mm (0.23" - 0.47") 9-14mm (0.35" - 0.55") 4 pole 9-14mm (0.35" - 0.55") 8-14mm (0.31" - 0.55") 9-14mm (0.35" - 0.55") Mechanical Operations Fastening (Chassis Self Tapping) MATERIALS Connector Shell / Finish - Chassis - Cable Plug Thermoplastic - Cable Plug Metal Insulators - Chassis - Cable Plugs 5000 M3 screw PA66 GF20 / Black PA66 GF30 / Black Diecast Zinc Alloy / Nickel or Black PA66 GF20 PA66 GF30 Cable Boot / Backshell Santoprene / PA6 GF 15 Cable Clamp (Chuck) P.O.M Cable Clamp (PG) Polyemide / EPDM Sleeve PBT Rev 5 - 03/2013 Contact Chassis - Material / Plating Phosphor Bronze / Silver Contact Cable Plug - Material Plating packaging. Please contact us for exact weight for shipping purposes. Brass / Silver **Approximate weight in grams not /including 1) Not suitable for domestic applications above 50V 75 ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801 www.amphenolaudio.com