4M x 4-Bit Dynamic RAM 2k & 4k Refresh (Hyper Page Mode - EDO) HYB 5116405BJ-50/-60 HYB 5117405BJ-50/-60 HYB 3116405BJ/BT(L)-50/-60 HYB 3117405BJ/BT-50/-60 Advanced Information * 4 194 304 words by 4-bit organization * 0 to 70 C operating temperature * Hyper Page Mode - EDO - operation * Performance: -50 -60 tRAC RAS access time 50 60 ns tCAC CAS access time 13 15 ns tAA Access time from address 25 30 ns tRC Read/Write cycle time 84 104 ns 20 25 tHPC Hyper page mode (EDO) cycle time ns * Power dissipation, refresh & addressing: HYB 5116405 HYB 3116405 HYB 5117405 HYB 3117405 -50 Power supply Addressing -60 -50 -60 -50 -60 -50 -60 5 V 10% 3.3 V 0.3 V 5 V 10% 3.3 V 0.3 V 12/10 12/10 11/11 11/11 Refresh 4096 cylces / 64 ms 2048 cycles / 32 ms L-version 4096 cycles / 128 ms - Active 275 220 180 144 440 385 288 252 mW TTL Standby 11 7.2 11 7.2 mW CMOS Standby 5.5 3.6 5.5 3.6 mW CMOS Standby (L-version) - 0.72 - - mW * Read, write, read-modify-write, CAS-before-RAS refresh, RAS-only refresh, hidden refresh, test mode and Self Refresh (on L-versions only) * All inputs, outputs and clocks fully TTL (5 V versions) and LV-TTL (3.3 V version)-compatible * Plastic Package: Semiconductor Group P-SOJ-26/24-1 300 mil P-TSOPII-26/24-1 300 mil 1 1998-10-01 HYB 5116(7)405BJ-50/-60 HYB 3116(7)405BJ/BT(L)-50/-60 4M x 4 EDO-DRAM The HYB 5(3)116(7)405 are 16 MBit dynamic RAMs based on die revisions "G" & "F" and organized as 4 194 304 words by 4-bits. The HYB 5(3)116(7)405BJ/BT(L) utilizes a submicron CMOS silicon gate process technology, as well as advanced circuit techniques to provide wide operating margins, both internally and for the system user. Multiplexed address inputs permit the HYB 5(3)116(7)405 to be packaged in a standard SOJ-26/24 and TSOPII-26/24 plastic package with 300 mil width. These packages provide high system bit densities and are compatible with commonly used automatic testing and insertion equipment. The HYB 3116(7)405BTL have a very low power "sleep mode" supported by Self Refresh. Ordering Information Type Ordering Code Package Descriptions HYB 5117405BJ-50 Q67100-Q1101 P-SOJ-26/24-1 300 mil 5 V 50 ns EDO-DRAM HYB 5117405BJ-60 Q67100-Q1102 P-SOJ-26/24-1 300 mil 5 V 60 ns EDO-DRAM HYB 3117405BJ-50 on request P-SOJ-26/24-1 300 mil 3.3 V 50 ns EDO-DRAM HYB 3117405BJ-60 on request P-SOJ-26/24-1 300 mil 3.3 V 60 ns EDO-DRAM HYB 3117405BT-50 on request P-TSOPII-26/24-1 300 mil 3.3 V 50 ns EDO-DRAM HYB 3117405BT-60 on request P-TSOPII-26/24-1 300 mil 3.3 V 60 ns EDO-DRAM 2k-Refresh Versions: 4k-Refresh Versions: HYB 5116405BJ-50 Q67100-Q1098 P-SOJ-26/24-1 300 mil 5 V 50 ns EDO-DRAM HYB 5116405BJ-60 Q67100-Q1099 P-SOJ-26/24-1 300 mil 5 V 60 ns EDO-DRAM HYB 3116405BJ-50 on request P-SOJ-26/24-1 300 mil 3.3 V 50 ns EDO-DRAM HYB 3116405BJ-60 on request P-SOJ-26/24-1 300 mil 3.3 V 60 ns EDO-DRAM HYB 3116405BT-50 on request P-TSOPII-26/24-1 300 mil 3.3 V 50 ns EDO-DRAM HYB 3116405BT-60 on request P-TSOPII-26/24-1 300 mil 3.3 V 60 ns EDO-DRAM HYB 3116405BTL-50 on request P-TSOPII-26/24-1 300 mil 3.3 V 50 ns LP-EDO-DRAM HYB 3116405BTL-60 on request P-TSOPII-26/24-1 300 mil 3.3 V 60 ns LP-EDO-DRAM Semiconductor Group 2 1998-10-01 HYB 5116(7)405BJ-50/-60 HYB 3116(7)405BJ/BT(L)-50/-60 4M x 4 EDO-DRAM Pin Names HYB 5(3)16405 4k-Refresh HYB 5(3)17405 2k-Refresh Row Address Inputs A0 - A11 A0 - A10 Column Address Inputs A0 - A9 A0 - A10 Row Address Strobe RAS Column Address Strobe CAS Output Enable OE Data Input/Output I/O1 - I/O4 Read/Write Input WE Power Supply VCC Ground (0 V) VSS Not Connected - N.C. P-SOJ-26/24-1 300 mil P-TSOPII-26/24-1 300 mil VCC I/O1 I/O2 WE RAS A11 / N.C. A10 A0 A1 A2 A3 VCC 1 2 3 4 5 6 26 25 24 23 22 21 VSS I/O4 I/O3 CAS OE A9 8 9 10 11 12 13 19 18 17 16 15 14 A8 A7 A6 A5 A4 VSS SPP03454 Pin Configuration (top view) Semiconductor Group 3 1998-10-01 HYB 5116(7)405BJ-50/-60 HYB 3116(7)405BJ/BT(L)-50/-60 4M x 4 EDO-DRAM I/O1 I/O2 I/O3 I/O4 Data IN Buffer Data OUT Buffer OE & WE 4 CAS 4 No.2 Clock Generator 10 A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 Column Address Buffers (10) 10 Column Decoder Refresh Controller Sense Amplifier I/O Gating Refresh Counter (12) 4 1024 x4 12 12 RAS Row Address Buffers (12) 12 Row Decoder 4096 Memory Array 4096 x 1024 x 4 No.1 Clock Generator Voltage Down Generator VCC VCC (internal) SPB03455 Block Diagram for HYB 5(3)116405 (4k-refresh) Semiconductor Group 4 1998-10-01 HYB 5116(7)405BJ-50/-60 HYB 3116(7)405BJ/BT(L)-50/-60 4M x 4 EDO-DRAM I/O1 I/O2 I/O3 I/O4 Data In Buffer OE 4 & WE Data Out Buffer 4 CAS No.2 Clock Generator 11 A0 Column Address Buffers (11) 11 Column Decoder A1 A2 Refresh Controller A3 Sense Amplifier I/O Gating A4 4 A5 A6 11 A9 A10 . .. A8 2048 x4 . .. Refresh Counter (11) A7 11 RAS Row Address Buffers (11) 11 Row Decoder .. . 2048 .. . Memory Array 2048 x 2048 x 4 No.1 Clock Generator Voltage Down Generator V CC V CC (internal) SPB02823 Block Diagram for HYB 5(3)117405 (2k-refresh) Semiconductor Group 5 1998-10-01 HYB 5116(7)405BJ-50/-60 HYB 3116(7)405BJ/BT(L)-50/-60 4M x 4 EDO-DRAM Absolute Maximum Ratings Operating temperature range ........................................................................................... 0 to 70 C Storage temperature range........................................................................................ - 55 to 150 C Input/output voltage (5 V versions) ................................................... - 0.5 to min (VCC + 0.5, 7.0) V Input/output voltage (3.3 V versions) ................................................ - 0.5 to min (VCC + 0.5, 4.6) V Power supply voltage (5 V versions) ....................................................................... - 1.0 V to 7.0 V Power supply voltage (3.3 V versions) .................................................................... - 1.0 V to 4.6 V Power dissipation (5 V versions) ............................................................................................ 1.0 W Power dissipation (3.3 V versions) ......................................................................................... 0.5 W Data out current (short circuit) ............................................................................................... 50 mA Note: Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage of the device. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. DC Characteristics TA = 0 to 70 C, VSS = 0 V, tT = 2 ns Parameter Symbol Limit Values min. max. Unit Test Condition V 5 V Versions Power supply voltage VCC 4.5 5.5 Input high voltage VIH 2.4 VCC + 0.5 V 1 Input low voltage VIL - 0.5 0.8 V 1 Output high voltage (IOUT = - 5 mA) VOH 2.4 - V 1 Output low voltage (IOUT = 4.2 mA) VOL - 0.4 V 1 Power supply voltage VCC 3.0 3.6 V Input high voltage VIH 2.0 VCC + 0.5 V 1 Input low voltage VIL - 0.5 0.8 V 1 TTL Output high voltage (IOUT = - 2 mA) VOH 2.4 - V 1 TTL Output low voltage (IOUT = 2 mA) VOL - 0.4 V 1 3.3 V Versions CMOS Output high voltage (IOUT = - 100 A) VOH VCC - 0.2 - V CMOS Output low voltage (IOUT = 100 A) - V Semiconductor Group VOL 6 0.2 1998-10-01 HYB 5116(7)405BJ-50/-60 HYB 3116(7)405BJ/BT(L)-50/-60 4M x 4 EDO-DRAM DC Characteristics (cont'd) TA = 0 to 70 C, VSS = 0 V, tT = 2 ns Parameter Symbol Limit Values min. Unit Notes max. 2k 4k Common Parameters Input leakage current (0 V VIH VCC + 0.3 V, all other pins = 0 V) II(L) - 10 10 A 1 Output leakage current (DO is disabled, 0 V VOUT VCC + 0.3 V) IO(L) - 10 10 A 1 Average VCC supply current ICC1 mA mA 2, 3, 4 mA - mA mA 2, 4 -50 version -60 version (RAS, CAS, address cycling: tRC = tRC MIN.) - - Standby VCC supply current (RAS = CAS = VIH) ICC2 Average VCC supply current, during RAS-only refresh cycles -50 version -60 version (RAS cycling, CAS = VIH, tRC = tRC MIN.) ICC3 Standby VCC supply current (RAS = CAS = VCC - 0.2 V) ICC5 Average VCC supply current, during CASbefore-RAS refresh mode -50 version -60 version (RAS, CAS cycling: tRC = tRC MIN.) ICC6 Average Self Refresh current (CBR cycle with tRAS > tRASS MIN., CAS held low, WE = VCC - 0.2 V, Address and Din = VCC - 0.2 V or 0.2 V) ICC7 Semiconductor Group - - - Average VCC supply current,during hyper page ICC4 mode (EDO) -50 version -60 version (RAS = VIL, CAS, address cycling: tPC = tPC MIN.) 50 40 2 80 70 50 40 2, 3, 4 2, 4 - - 35 30 mA mA 2, 3, 4 - 1 200 mA A 1 mA mA 2, 4 A Lversion only - - 7 80 70 - 80 70 50 40 250 2, 3, 4 L-version 2, 4 1998-10-01 HYB 5116(7)405BJ-50/-60 HYB 3116(7)405BJ/BT(L)-50/-60 4M x 4 EDO-DRAM Capacitance TA = 0 to 70 C, f = 1 MHz Parameter Symbol Limit Values min. max. Unit Input capacitance (A0 to A11) CI1 - 5 pF Input capacitance (RAS, CAS, WE, OE) CI2 - 7 pF I/O capacitance (I/O1 to I/O4) CIO - 7 pF AC Characteristics 5, 6 TA = 0 to 70 C, VCC = 5 V 10 % / VCC = 3.3 V 0.3 V, tT = 2 ns Parameter Symbol Limit Values -50 Unit Note -60 min. max. min. max. Common Parameters Random read or write cycle time tRC 84 - 104 - ns RAS precharge time tRP 30 - 40 - ns RAS pulse width tRAS 50 10k 60 10k ns CAS pulse width tCAS 8 10k 10 10k ns Row address setup time tASR 0 - 0 - ns Row address hold time tRAH 8 - 10 - ns Column address setup time tASC 0 - 0 - ns Column address hold time tCAH 8 - 10 - ns RAS to CAS delay time tRCD 12 37 14 45 ns RAS to column address delay tRAD 10 25 12 30 ns RAS hold time tRSH 13 - 15 - ns CAS hold time tCSH 40 - 50 - ns CAS to RAS precharge time tCRP 5 - 5 - ns Transition time (rise and fall) tT 1 50 1 50 ns Refresh period for 2k-refresh version tREF - 32 - 32 ms Refresh period for 4k-refresh version tREF - 64 - 64 ms Refresh period for Low Power Version tREF - 128 - 128 ms Access time from RAS tRAC - 50 - 60 ns 8, 9 Access time from CAS tCAC - 13 - 15 ns 8, 9 Semiconductor Group 8 7 Read Cycle 1998-10-01 HYB 5116(7)405BJ-50/-60 HYB 3116(7)405BJ/BT(L)-50/-60 4M x 4 EDO-DRAM AC Characteristics (cont'd) 5, 6 TA = 0 to 70 C, VCC = 5 V 10 % / VCC = 3.3 V 0.3 V, tT = 2 ns Parameter Symbol Limit Values -50 Unit Note -60 min. max. min. max. 8, 10 Access time from column address tAA - 25 - 30 ns OE access time tOEA - 13 - 15 ns Column address to RAS lead time tRAL 25 - 30 - ns Read command setup time tRCS 0 - 0 - ns Read command hold time tRCH 0 - 0 - ns 11 Read command hold time referenced to RAS tRRH 0 - 0 - ns 11 CAS to output in low-Z tCLZ 0 - 0 - ns 8 Output buffer turn-off delay tOFF 0 13 0 15 ns 12 Output turn-off delay from OE tOEZ 0 13 0 15 ns 12 Data to CAS low delay tDZC 0 - 0 - ns 13 Data to OE low delay tDZO 0 - 0 - ns 13 CAS high to data delay tCDD 10 - 13 - ns 14 OE high to data delay tODD 10 - 13 - ns 14 Write command hold time tWCH 8 - 10 - ns Write command pulse width tWP 8 - 10 - ns Write command setup time tWCS 0 - 0 - ns Write command to RAS lead time tRWL 8 - 10 - ns Write command to CAS lead time tCWL 8 - 10 - ns Data setup time tDS 0 - 0 - ns 16 Data hold time tDH 8 - 10 - ns 16 Read-write cycle time tRWC 113 - 138 - ns RAS to WE delay time tRWD 64 - 77 - ns 15 CAS to WE delay time tCWD 27 - 32 - ns 15 Column address to WE delay time tAWD 39 - 47 - ns 15 OE command hold time tOEH 10 - 13 - ns Write Cycle 15 Read-Modify-Write Cycle Semiconductor Group 9 1998-10-01 HYB 5116(7)405BJ-50/-60 HYB 3116(7)405BJ/BT(L)-50/-60 4M x 4 EDO-DRAM AC Characteristics (cont'd) 5, 6 TA = 0 to 70 C, VCC = 5 V 10 % / VCC = 3.3 V 0.3 V, tT = 2 ns Parameter Symbol Limit Values -50 Unit Note -60 min. max. min. max. Hyper Page Mode (EDO) Cycle Hyper page mode (EDO) cycle time tHPC 20 - 25 - ns CAS precharge time tCP 8 - 10 - ns Access time from CAS precharge tCPA - 27 - 32 ns Output data hold time tCOH 5 - 5 - ns RAS pulse width in EDO mode tRAS 50 200k 60 200k ns CAS precharge to RAS delay tRHCP 27 - 32 - ns OE setup time prior to CAS tOES 5 - 5 - ns 7 Hyper Page Mode (EDO) Read-Modify-Write Cycle Hyper page mode (EDO) read-write cycle time tPRWC 58 - 68 - ns CAS precharge to WE tCPWD 41 - 49 - ns CAS setup time tCSR 10 - 10 - ns CAS hold time tCHR 10 - 10 - ns RAS to CAS precharge time tRPC 5 - 5 - ns Write to RAS precharge time tWRP 10 - 10 - ns Write hold time referenced to RAS tWRH 10 - 10 - ns tCPT 35 - 40 - ns RAS pulse width tRASS 100k - 100k - ns 17 RAS precharge time tRPS 95 - 110 - ns 17 CAS hold time tCHS - 50 - - 50 - ns 17 CAS-before-RAS Refresh Cycle CAS-before-RAS Counter Test Cycle CAS precharge time (CAS-before-RAS counter test cycle) Self Refresh Cycle (L-Version only) Semiconductor Group 10 1998-10-01 HYB 5116(7)405BJ-50/-60 HYB 3116(7)405BJ/BT(L)-50/-60 4M x 4 EDO-DRAM AC Characteristics (cont'd) 5, 6 TA = 0 to 70 C, VCC = 5 V 10 % / VCC = 3.3 V 0.3 V, tT = 2 ns Parameter Symbol Limit Values -50 Unit Note -60 min. max. min. max. Test Mode Write command setup time tWTS 10 - 10 - ns Write command hold time tWTH 10 - 10 - ns CAS hold time tCHRT 30 - 30 - ns RAS hold time in test mode tRAHT 30 - 30 - ns Semiconductor Group 11 1998-10-01 HYB 5116(7)405BJ-50/-60 HYB 3116(7)405BJ/BT(L)-50/-60 4M x 4 EDO-DRAM Notes All voltages are referenced to VSS. ICC1, ICC3, ICC4 and ICC6 depend on cycle rate. ICC1 and ICC4 depend on output loading. Specified values are obtained with the output open. Address can be changed once or less while RAS = VIL. In case of ICC4 it can be changed once or less during a hyper page mode (EDO) cycle 5. An initial pause of 200 s is required after power-up followed by 8 RAS cycles of which at least one cycle has to be a refresh cycle, before proper device operation is achieved. In case of using the internal refresh counter, a minimum of 8 CAS-before-RAS initialization cycles instead of 8 RAS cycles are required. 6. AC measurements assume tT = 2 ns. 7. VIH (MIN.) and VIL (MAX.) are reference levels for measuring timing of input signals. Transition times are also measured between VIH and VIL. 8. Measured with the specified current load and 100 pF at VOL = 0.8 V and VOH = 2.0 V. Access time is determined by the latter of tRAC, tCAC, tAA, tCPA, tOEA . tCAC is measured from tristate. 9. Operation within the tRCD (MAX.) limit ensures that tRAC (MAX.) can be met. tRCD (MAX.) is specified as a reference point only. If tRCD is greater than the specified tRCD (MAX.) limit, then access time is controlled by tCAC. 10.Operation within the tRAD (MAX.) limit ensures that tRAC (MAX.) can be met. tRAD (MAX.) is specified as a reference point only. If tRAD is greater than the specified tRAD (MAX.) limit, then access time is controlled by tAA. 11.Either tRCH or tRRH must be satisfied for a read cycle. 12.tOFF (MAX.), tOEZ (MAX.) define the time at which the output achieves the open-circuit conditions and are not referenced to output voltage levels. tOFF is referenced from the rising edge of RAS or CAS, whichever occurs last. 13.Either tDZC or tDZO must be satisfied. 14.Either tCDD or tODD must be satisfied. 15.tWCS, tRWD, tCWD and tAWD are not restrictive operating parameters. They are included in the data sheet as electrical characteristics only. If tWCS > tWCS (MIN.), the cycle is an early write cycle and data out pin will remain open-circuit (high impedance) through the entire cycle; if tRWD > tRWD (MIN.), tCWD > tCWD (MIN.) and tAWD > tAWD (MIN.), the cycle is a read-write cycle and I/O will contain data read from the selected cells. If neither of the above sets of conditions is satisfied, the condition of I/O (at access time) is indeterminate. 16.These parameters are referenced to the CAS leading edge in early write cycles and to the WE leading edge in read-write cycles. 17.When using Self Refresh mode, the following refresh operations must be performed to ensure proper DRAM operation: If row addresses are being refreshed on an evenly distributed manner over the refresh interval using CBR refresh cycles, then only one CBR cycle must be performed immediately after exit from Self Refresh. If row addresses are being refreshed in any other manner (ROR - Distributed/Burst; or CBRBurst) over the refresh interval, then a full set of row refreshes must be performed immediately before entry to and immediately after exit from Self Refresh. 1. 2. 3. 4. Semiconductor Group 12 1998-10-01 HYB 5116(7)405BJ-50/-60 HYB 3116(7)405BJ/BT(L)-50/-60 4M x 4 EDO-DRAM t RC t RAS t RP VIH RAS VIL t CSH t RCD t RSH t CAS VIH t CRP CAS VIL t RAD t ASR t RAL t CAH t ASC t ASR VIH Address Row VIL Column Row t RAH t RCH t RRH t RCS VIH WE VIL t AA t OEA VIH OE VIL t DZC t CDD t DZO I/O (Inputs) t ODD VIH VIL t OFF t CAC t CLZ VOH I/O (Outputs) V OL Hi Z t OEZ Valid Data OUT Hi Z t RAC "H" or "L" SPT03025 Read Cycle Semiconductor Group 13 1998-10-01 HYB 5116(7)405BJ-50/-60 HYB 3116(7)405BJ/BT(L)-50/-60 4M x 4 EDO-DRAM t RC t RAS t RP VIH RAS VIL t CSH t RCD t RSH t CRP t CAS VIH CAS VIL t RAL t RAD t ASR t ASC t CAH t ASR VIH Address Row VIL Column t RAH t CWL t WCS VIH Row t WP WE VIL t WCH t RWL VIH OE VIL t DS I/O (Inputs) t DH VIH Valid Data IN VIL VOH I/O (Outputs) V OL Hi Z "H" or "L" SPT03026 Write Cycle (Early Write) Semiconductor Group 14 1998-10-01 HYB 5116(7)405BJ-50/-60 HYB 3116(7)405BJ/BT(L)-50/-60 4M x 4 EDO-DRAM t RC t RAS t RP VIH RAS VIL t CSH t RCD t RSH t CRP t CAS VIH CAS VIL t RAD t RAL t CAH t ASC t ASR t ASR VIH Address Row VIL Column Row t RAH t CWL t RWL t WP VIH WE VIL t OEH VIH OE VIL t ODD t DZO t DZC I/O (Inputs) t DH t DS VIH Valid Data VIL t CLZ t OEZ t OEA VOH I/O (Outputs) V OL Hi Z Hi Z "H" or "L" SPT03027 Write Cycle (OE Controlled Write) Semiconductor Group 15 1998-10-01 HYB 5116(7)405BJ-50/-60 HYB 3116(7)405BJ/BT(L)-50/-60 4M x 4 EDO-DRAM t RWC t RAS VIH RAS VIL t CSH t RP t RSH t CAS t RCD t CRP VIH CAS VIL t RAH t ASR t CAH t ASC t ASR VIH Address Row Column Row VIL t RAD t CWL t AWD t CWD t RWL t WP t RWD VIH WE VIL t AA t RCS t OEA t OEH VIH OE VIL t DZC t DS t DZO I/O (Inputs) t DH VIH Valid Data IN VIL t ODD t CAC t OEZ t CLZ VOH I/O (Outputs) V OL Data OUT t RAC "H" or "L" SPT03028 Read-Write (Read-Modify-Write) Cycle Semiconductor Group 16 1998-10-01 HYB 5116(7)405BJ-50/-60 HYB 3116(7)405BJ/BT(L)-50/-60 4M x 4 EDO-DRAM t RAS t RCD t RHCP VIH RAS VIL t HPC t RP t RSH t CAS t CP t CRP t CAS t CAS t CRP VIH CAS VIL t CSH t RAH t ASR t RAL t CAH t ASC t CAH t CAH t ASC Column 2 Column N t ASC VIH Address Row Column 1 VIL t RAD t RRH t RCS t RCH VIH WE VIL t CAC t AA t CPA t OES t OEA t CAC t AA t CPA t OFF VIH OE VIL t RAC t AA t CAC t CLZ t COH t COH t OEZ VOH I/O (Output) V OL Data OUT 1 Data OUT 2 Data OUT N "H" or "L" SPT03038 Hyper Page Mode (EDO) Read Cycle Semiconductor Group 17 1998-10-01 HYB 5116(7)405BJ-50/-60 HYB 3116(7)405BJ/BT(L)-50/-60 4M x 4 EDO-DRAM t RAS t RCD t RHCP VIH RAS VIL t HPC t RP t CP t CRP t CAS t RSH t CAS t CAS t CRP VIH CAS VIL t CSH t RAH t ASR VIH Address VIL t ASC Row Address t CAH t ASC Column 1 t CAH t RAL t CAH t ASC Column 2 Column N t RAD t RWL t CWL t WCS t CWL t WCS t WCS t WCH t WP t WCH t WP t CWL t WCH t WP VIH WE VIL VIH OE VIL t DH t DS I/O (Input) t DH t DS t DH t DS VIH Data IN 1 Data IN 2 Data IN N VIL "H" or "L" SPT03039 Hyper Page Mode (EDO) Early Write Cycle Semiconductor Group 18 1998-10-01 HYB 5116(7)405BJ-50/-60 HYB 3116(7)405BJ/BT(L)-50/-60 4M x 4 EDO-DRAM t RAS VIH RAS VIL t CSH t RP t CP t RCD t PRWC t CAS t RSH t CAS t CAS t CRP VIH CAS VIL t ASR t RAD t RAH t ASC t RAL t CAH t CAH t CAH t ASC t ASC t ASR VIH Address Row Column Column Column Row VIL t RWD t CWD t RCS t CPWD t CWD t CWL t CPWD t CWD t CWL t RWL t CWL VIH WE VIL t AWD t AA t AWD t WP t OEA t AWD t WP t OEA t WP t OEA t OEH t OEH t OEH VIH OE VIL t CLZ t DZC t CLZ t ODD t CLZ t CPA t ODD t DZC t DZO VIH I/O (Inputs) V IL Data IN t CAC t RAC VOH I/O (Outputs) V t OEZ t CPA t ODD Data IN t DH t DS t DZC Data IN t DH t AA t DS t OEZ t DS t AA Data OUT Data OUT t DH t CAC t OEZ Data OUT OL "H" or "L" SPT03031 Hyper Page Mode (EDO) Late Write and Read-Modify Write Cycle Semiconductor Group 19 1998-10-01 HYB 5116(7)405BJ-50/-60 HYB 3116(7)405BJ/BT(L)-50/-60 4M x 4 EDO-DRAM t RC t RAS t RP VIH RAS VIL t CRP t RPC VIH CAS VIL t RAH t ASR t ASR VIH Row Address Row VIL VOH I/O (Outputs) V OL Hi Z "H" or "L" SPT03032 RAS-only Refresh Cycle Semiconductor Group 20 1998-10-01 HYB 5116(7)405BJ-50/-60 HYB 3116(7)405BJ/BT(L)-50/-60 4M x 4 EDO-DRAM t RC t RP t RAS t RP VIH RAS VIL t RPC t CP t CHR t RPC t CSR t CRP VIH CAS VIL t WRH t WRP VIH WE VIL VIH OE VIL t ODD I/O (Inputs) VIH VIL t CDD t OEZ VOH I/O (Outputs) V OL Hi Z t OFF "H" or "L" SPT03033 CAS-before-RAS Refresh Cycle Semiconductor Group 21 1998-10-01 HYB 5116(7)405BJ-50/-60 HYB 3116(7)405BJ/BT(L)-50/-60 4M x 4 EDO-DRAM t RC t RC t RP t RP t RAS t RAS VIH RAS VIL t RCD t RSH t CHR t CRP VIH CAS VIL t RAD t ASC t WRP t RAH t ASR t WRH t CAH t ASR VIH Address Row VIL Column Row t RCS t RRH VIH WE VIL t AA t OEA VIH OE VIL t DZC t CDD t ODD t DZO I/O (Inputs) VIH VIL t CLZ t CAC t OFF t RAC t OEZ VOH I/O (Outputs) V OL Valid Data OUT "H" or "L" Hi Z SPT03034 Hidden Refresh Cycle (Read) Cycle Semiconductor Group 22 1998-10-01 HYB 5116(7)405BJ-50/-60 HYB 3116(7)405BJ/BT(L)-50/-60 4M x 4 EDO-DRAM t RC t RC t RAS t RP t RAS t RP VIH RAS VIL t RCD t RSH t CHR t CRP VIH CAS VIL t RAD t ASC t RAH t ASR t ASR t CAH VIH Address Row VIL Column Row t WCS t WCH t WP t WRH t WRP VIH WE VIL t DS t DH I/O (Input) VIN Valid Data VIL VOH I/O (Output) V OL Hi Z "H" or "L" SPT03035 Hidden Refresh Early Write Cycle Semiconductor Group 23 1998-10-01 HYB 5116(7)405BJ-50/-60 HYB 3116(7)405BJ/BT(L)-50/-60 4M x 4 EDO-DRAM t RP t RASS t RPS VIH RAS ~ ~ VIL t RPC t CP t CSR t CHS t CRP VIH CAS ~ ~ VIL t WRP ~ ~ VIH t WRH WE VIL ~ ~ VIH OE ~ ~ VIL t ODD ~ ~ VIL ~ ~ I/O (Inputs) VIH t CDD t OEZ ~ ~ VOH I/O (Outputs) V OL Hi Z t OFF "H" or "L" SPT03058 Self Refresh Semiconductor Group 24 1998-10-01 HYB 5116(7)405BJ-50/-60 HYB 3116(7)405BJ/BT(L)-50/-60 4M x 4 EDO-DRAM Read Cycle t RAS t RP VIH RAS VIL t CHR t CSR t RSH t CP VIH t CAS CAS VIL t RAL t CAH t ASR t ASC VIH Address Column VIL t WRP Row t AA t RRH VIH WE VIL t WRH t CAC t RCS t RCH t OEA VIH OE VIL t CDD t DZC VIH I/O (Inputs) V IL t ODD t OFF t DZO t CLZ t OEZ VOH I/O (Outputs) V Write Cycle Data OUT t WCS OL t RWL t CWL t WRP t WCH VIH WE VIL t WRH t DH VIH OE VIL t DS VIH I/O (Inputs) V IL Data IN VOH I/O (Outputs) V Hi Z OL "H" or "L" SPT03036 CAS-before-RAS Refresh Counter Test Cycle Semiconductor Group 25 1998-10-01 HYB 5116(7)405BJ-50/-60 HYB 3116(7)405BJ/BT(L)-50/-60 4M x 4 EDO-DRAM t RC t RP t RAS t RP VIH RAS VIL t RPC t CP t RPC t CHR t CRP t CSR VIH CAS VIL t RAH t ASR VIH Row Address VIL t WTH t WTS VIH WE VIL VIH OE VIL t ODD I/O (Inputs) VIH Hi Z VIL t CDD t OEZ VOH Hi Z I/O (Outputs) V OL t OFF "H" or "L" SPT03042 Test Mode Entry Semiconductor Group 26 1998-10-01 HYB 5116(7)405BJ-50/-60 HYB 3116(7)405BJ/BT(L)-50/-60 4M x 4 EDO-DRAM Package Outlines 0.5 30 0.85 max 0.18 M 24x 15.24 26 21 19 14 1 6 8 13 17.27-0.251) 0.1 0.25 A 7.75 -0.25 6.8 0.2 8.63 -0.25 B 0.25 B 0.18 M B GPJ05628 1.27 0.51-0.1 1) 0.2 +0.1 0.8 min 2.64 0.1 3.75 -0.5 Plastic Package P-SOJ-26/24-1 (SMD) (300mil) (Plastic small outline J-leaded) A Index Marking 1) Does not include plastic or metal protrusions of 0.15 max per side Sorts of Packing Package outlines for tubes, trays etc. are contained in our Data Book "Package Information". SMD = Surface Mounted Device Semiconductor Group 27 Dimensions in mm 1998-10-01 HYB 5116(7)405BJ-50/-60 HYB 3116(7)405BJ/BT(L)-50/-60 4M x 4 EDO-DRAM 7.62 0.13 5 max 3 0.15 +0.06 -0.0 1.2 max 1 0.05 0.1 0.05 Plastic Package P-TSOPII-26/24-1 (400 mil) (SMD) (Plastic Thin Small Outline Package (Type II)) 0.6 -0.2 1.27 9.22 0.2 0.4 +0.12 -0.1 0.2 M 24x 26 1 2119 0.1 14 6 8 13 1) 17.14 0.13 GPX05857 Index Marking 1) Does not include plastic or metal protrusion of 0.15 max per side Sorts of Packing Package outlines for tubes, trays etc. are contained in our Data Book "Package Information". SMD = Surface Mounted Device Semiconductor Group 28 Dimensions in mm 1998-10-01