r/c filter networks EU features * * * * * Thin film construction Surface mount package Stable resistor technology High component density Products with lead-free terminations meet EU RoHS and China RoHS requirements applications dimensions and construction Bonding Wire W a w Die Pad Si Molded Wafer Resin Lead Signal termination Signal conditioning Low pass filter T filter Package Total Code Power c L * * * * Pins Dimensions inches (mm) L 0.2 W 0.2 w 0.2 H 0.2 p 0.1 Q20 1 watt 20 .341 (8.66) Q24 1 watt 24 .341 (8.66) a 0.1 c 0.1 .236 (5.99) .150 (3.81) .063 (1.60) .025 (0.635) .010 (0.25) .026 (0.66) .236 (5.99) .150 (3.81) .063 (1.60) .025 (0.635) .010 (0.25) .026 (0.66) p H circuit schematic TFB: 20 pins TFA: 20 pins TFB: 24 pins ordering information New Part # TFB Type TFA TFB Q20 T Package Code Reference above table Termination Material T: Sn (Other termination styles available, contact factory for options) TEB Packaging TEB: 13" embossed plastic tape 250 Nominal Resistance 2 significant digits + number of zeros K Tolerance K: 10% 201 / M Nominal Capacitance 2 significant digits + number of zeros Tolerance M: 20% For further information on packaging, please refer to Appendix A. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 11/20/08 KOA Speer Electronics, Inc. * 199 Bolivar Drive * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com 89 resistors TF(X) resistors TF(X) r/c filter networks Parallel Termination Gnd 200 pF Driver 25 ohms 25 ohms Receiver applications and ratings Part Designation Power Rating @ 70C (Per Element) T.C.R. (ppm/C) TFA TFB 100mW 200 Capacitor Capacitor Operating Resistance Resistance Range Range Voltage Temperature Tolerance (E-24) pF (E-24) Range Rating -55C to +155C 20V 10 ~ 1,000 K: 10% 33 ~ 400pF Capacitor Tolerance ESD* Rating IEC 61000-4-2 Diode* Breakdown Voltage (@1ma) M: 20% 8kV* 6.5v Min. * TFB only environmental applications Performance Characteristics Parameter Test Method Maximum R Resistance to Soldering Heat +0.25% MIL-R-55342 4.7.7 Short Time Overload +0.50% MIL-R-55342 4.7.5 Moisture Resistance +0.50% MIL-STD-202 method 103 Thermal Shock +0.50% MIL-STD-202 method 107 H.A.S.T. +1% 2 Atm., 121C, 96 hrs Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 90 11/19/09 KOA Speer Electronics, Inc. * 199 Bolivar Drive * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com