474MWR250K GENERAL PURPOSE FILM Parts are RoHS compliant ELECTRICAL SPECIFICATIONS Capacitance: 0.47 uF Tolerance: -10 % , +10 % Dissipation Factor: 0.006 Max at 1000 Hz and 25C . 0.075 Max at 10 KHz and =Temperature Range: -40C to +105C 25C Above 35C the rated (DC/AC) voltage must be derated at per 1.2590C Temperature Coefficient: 400 PPM/*C: -200 PPM/PC, 200 PPM/*C WVDC: 250 Volts DC Ripple Current: at and SVDC: N/A Volts DC ESR: 3.01 Ohms at 1 kHz and 20C VAC: 160 Volts AC Self Inductance: 1 Nanohenries maximum per mm of body length and lead length dvdt: 7 Vius Terminal to Terminal Dielectric strength: 1.6 times the rated DC voltage when Terminal to case Dielectric strength: 0 VAC when applied between the applied between the terminals for 2 seconds terminals and case for 0 Insulation Resistance (Terminal to Terminal): 10000 MINIMUM after 100 Volts Insulation resistance (Terminal to Case): N/A Megohms MINIMUM after 0 Volts DC is applied for 60 seconds at 20C DC is applied for 0 seconds at 0 Reliability: 3 FIT Load Life: 2000 hours at 85C with 125% of rated voltage Capacitance Change: <5% of initially measured value D.F. Change: <50% of maximum specified value LR. Change: =50% of minimum specified value PHYSICAL DIMENSIONS Diameter (D): 9.5 mm, MAX mm Lead Spacing (5): mm, +/- mm Length (L): 19 mm, MAX mm Lead Diameter (d): 0.8 mm, +/-0.05 mm Lead Finish: Matte Tin Lead Length (LL): 35mm, +/- MIN mm d z + ; |} x oD k LL + L _a- LL _-| a . 3757 W. Touhy Ave. Lincolnwood, IL 60712 (847) 675-1760 FAX (847) 673-2850 fi Illinois Capacitor (HK) Ltd., Tel: 85227930931, Fax: 85227930731, www illcap com hk I ILLINOIS CAPACITOR Copyright 2017 Illinois Capacitor. A division of Cornell Dubilier, All Rights Reserved