you could cut out a custom end plate from another material if you like.
The inside has circuit board slots so if you have a custom PCB, it can slot in without screws and
won't rattle around too much. We thought this would be perfect for something like a DIY audio
amplifier or maybe even a measurement tool that does best with RF shielding.
These also come in a nice dark anodized-black aluminum. Each comes with a box, eight screws,
and two panels for the sides. Screws are 6mm length, M2.5 size, with a .45mm pitch if you lose
one or need more.
This is a 94mm x 83mm x 30mm box. We also carry a 100mm x 67mm version.
TECHNICAL DETAILS
Dimensions: 94mm x 83mm x 30mm / 3.7" x 3.3" x 1.1"
Interior dimensions: 78mm x 25mm / 3.1" x 1.0"
Weight: 125g
Diagram
LEARN
Build a Custom Front Panel
Your project works! Time to
tuck it into a nice enclosure
and create a front panel for
all those knobs and lights.