K3020P, K3020PG Series www.vishay.com Vishay Semiconductors Optocoupler, Phototriac Output, Non-Zero Crossing, 400 VDRM FEATURES * 400 V blocking voltage * Wide range of trigger current * 100 mARMS on-state current 6 MT2 A 1 * Wide temperature range -55 C to +100 C 5 NC C 2 * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 4 MT1 NC 3 APPLICATIONS * Power TRIAC driver * Isolated AC load switch * Air condition * Heaters DESCRIPTION * White goods The K3020P, K3020PG series consists of a phototriac optically coupled to a gallium arsenide infrared-emitting diode in a 6-lead plastic dual inline package. * Industrial controls The non-zero crossing functionality enables full wave control. Featuring galvanic and electrical noise isolation, the output is able to directly switch AC loads or drive medium to high power TRIACs. AGENCY APPROVALS * Office equipment * UL * cUL * DIN EN 60747-5-5 (VDE 0884-5) * BSI * CQC * FIMKO ORDERING INFORMATION K 3 0 2 PART NUMBER X TRIGGER CURRENT BIN AGENCY CERTIFIED/PACKAGE VDE, cUL, BSI DIP-6 DIP-6, 400 mil P DIP-6 G leadform 7.62 mm 10.16 mm G PACKAGE OPTION TRIGGER CURRENT, IFT 5 mA 10 mA 15 mA 30 mA K3023P K3022P K3021P K3020P K3023PG K3022PG K3021PG K3020PG Note * Additional options may be possible, please contact sales office. Rev. 2.4, 30-Aug-16 Document Number: 83505 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 K3020P, K3020PG Series www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage VR 5 V Forward current IF 80 mA Surge current P.W. < 10 s IFSM 3 A Pdiss 100 mW Tj 100 C Peak off-state voltage VDRM 400 V On-state RMS current ID(RMS) 100 mA Power dissipation Junction temperature OUTPUT Peak surge current tp 10 ms Power dissipation Junction temperature IFSM 1.5 A Pdiss 300 mW Tj 100 C COUPLER Total power dissipation Ptot 350 mW Storage temperature range Tstg -55 to +150 C Ambient temperature Tamb -55 to +100 C Junction temperature Tj 100 C Tsld 260 C Lead soldering temperature 2 mm from case, t < 10 s Note * Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage IF = 50 mA VF - 1.3 1.6 V Reverse voltage IR = 10 A VR 5 - - V VR = 0 V, f = 1 MHz Cj - 50 - pF Forward peak off-state voltage (repetitive) IDRM = 100 nA VDRM (1) 400 - - V Peak on-state voltage Junction capacitance OUTPUT ITM = 100 mA VTM - 1.5 3 V Critical rate of rise of off-state voltage IF = 0 A, VD = 0.67 VDRM dV/dtcr - 10 - V/s Critical rate of rise of on-state current commutation VD = 30 VRMS, ID = 15 mARMS dV/dtcrq 0.1 0.15 - V/s mA COUPLER (2) Emitting diode trigger current Holding current VS = 3 V, RL = 150 IF = 10 mA, VS 3 V K3020P IFT - 15 30 K3020PG IFT - 15 30 mA K3021P IFT - 8 15 mA K3021PG IFT - 8 15 mA K3022P IFT - 5 10 mA K3022PG IFT - 5 10 mA K3023P IFT - 3 5 mA K3023PG IFT - 3 5 mA IH - 200 - A Notes * Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. (1) Test voltage must be applied within dV/dt ratings. (2) I is defined as a minimum trigger current. FT Rev. 2.4, 30-Aug-16 Document Number: 83505 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 K3020P, K3020PG Series www.vishay.com Vishay Semiconductors SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION SYMBOL Climatic classification According to IEC 68 part 1 Pollution degree According to DIN VDE 0109 Comparative tracking index Insulation group IIIa Maximum rated withstanding isolation voltage VALUE UNIT 55 / 100 / 21 2 CTI 175 According to UL1577, t = 1 min VISO 4420 VRMS Tested withstanding isolation voltage According to UL1577, t = 1 s VISO 5300 VRMS Maximum transient isolation voltage According to DIN EN 60747-5-5 VIOTM 8000 Vpeak Maximum repetitive peak isolation voltage According to DIN EN 60747-5-5 VIORM 890 Vpeak VIO = 500 V, Tamb = 25 C RIO 1012 VIO = 500 V, Tamb = 100 C RIO 1011 Isolation resistance Output safety power PSO 265 mW Input safety current ISI 130 mA Input safety temperature TS 150 C 7 mm Creepage distance DIP-6 Clearance distance Creepage distance DIP-6, 400 mil Clearance distance Insulation thickness VIORM x 1.6 = VPR, 100 % sample test with tM = 10 s, partial discharge < 5 pC Input to output test voltage, method A 7 mm 8 mm 8 mm DTI 0.4 mm VPR 1424 Vpeak Note * As per IEC 60747-5-5, 7.4.3.8.2, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. PACKAGE DIMENSIONS (in millimeters) DIP-6 9.00 max. 7.62 typ. 8.60 0.10 6.50 0.25 0.79 min. 3.10 0.50 3.55 0.25 0.90 min. 0.85 0.10 0.50 0.10 3 to 9 0.25 0.10 1.27 0.10 2.54 typ. 6 5 4 1 2 3 Pin one I.D. Rev. 2.4, 30-Aug-16 Document Number: 83505 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 K3020P, K3020PG Series www.vishay.com Vishay Semiconductors DIP-6, 400 mil 10.16 typ. 9.00 max. 7.62 typ. 8.60 0.10 6.50 0.25 3.05 0.50 3.55 0.25 0.10 min. 0.90 min. 0.85 0.10 0.50 0.10 0.25 0.10 10.55 0.40 1.27 0.10 2.54 typ. 6 5 4 1 2 3 Pin one I.D. PACKAGE MARKING K3020P V YWW H 68 Fig. 1 - Example of K3020P Notes * The "G" of the G leadform type is not marked on the body. * The VDE logo is only marked on ption1 parts. Rev. 2.4, 30-Aug-16 Document Number: 83505 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 K3020P, K3020PG Series www.vishay.com Vishay Semiconductors PACKAGING INFORMATION (in millimeters) DIP-6 528 0.2 330 0.5 260 0.5 200 0.5 150 0.5 125 0.5 - 1.0 30 0.5 B VISHAY OPTOSEMICONDUCTOR MADE IN MALAYSIA ANTISTATIC Detail B Detail A A - 1.0 - 1.0 3 0.5 - 1.0 380 1 0.7 0.5 1.0 14 x 13 x 10 = 130 12 0.3 B 6.6 0.3 Transparent rigid PVC 2.7 0.2 0. 1 6 R 4.4 0.3 0. 5 11 0.3 R 0.6 0.1 10 A Detail A Detail B 5.7 0.15 // 0.2 B 17996 Section A - B Not to scale DIP-6, 400 mil 15912 Rev. 2.4, 30-Aug-16 Document Number: 83505 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 K3020P, K3020PG Series www.vishay.com Vishay Semiconductors SHIPPING INFORMATION HANDLING AND STORAGE CONDITIONS ESD level: HBM class 2 DEVICES PER TUBS TYPE UNITS/TUBE TUBES/BOX UNITS/BOX DIP-6 50 40 2000 Floor life: unlimited Conditions: Tamb < 30 C, RH < 85 % Moisture sensitivity level 1, according to J-STD-020 SOLDER PROFILES 300 5s Lead temperature Temperature (C) 250 235 C to 260 C first wave 200 wave ca. 200 K/s 150 100 C to 130 C 100 ca. 2 K/s 2 K/s 50 full line: typical dotted line: process limits second wave ca. 5 K/s forced cooling 0 0 94 8626 50 100 150 200 250 Time (s) Fig. 2 - Wave Soldering Double Wave Profile According to J-STD-020 for DIP Devices Rev. 2.4, 30-Aug-16 Document Number: 83505 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000