Bulletin PD-2.294 rev. D 07/01 225CNQ015 SCHOTTKY RECTIFIER 220 Amp TO-244AB Major Ratings and Characteristics Characteristics Description/Features 225CNQ... Units IF(AV) Rectangular 220 A VRRM range 15 V 10,800 A 0.32 V - 55 to 125 C waveform IFSM @ tp = 5 s sine VF @ 110Apk, TJ=125C TJ range 80.01 [3.150] 40.26 [1.585] 39.75 [1.565] COMMON CATHODE 7.49 [.295] 6.99 [.275] Center tap module High frequency operation Guard ring for enhanced ruggedness and long term reliability High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance O 10.41 [.410] 9.65 [.380] 20.32 [.800] 17.78 [.700] 34.925 [1.375] REF. 63.50 [2.500] 60.96 [2.400] 23.55 [.927] 20.42 [.804] O LUG TERMINAL ANODE 1 LUG TERMINAL ANODE 2 4.95 [.195] 4.70 [.185] 1/4-20 SLOTTED HEX BASE COMMON CATHODE 15.75 [.620] 14.99 [.590] 92.71 [3.650] 90.17 [3.550] NOTES: 1. DIMENSIONS ARE SHOWN IN MILLIMETERS [INCHES]. 2. CONTROLLING DIMENSION: MILLIMETER www.irf.com 125C TJ operation (VR < 5V) Low forward voltage drop (per leg) 2X O The 225CNQ center tap Schottky rectifier module has been optimized for ultra low forward voltage drop specifically for the OR-ing of parallel power supplies. The proprietary barrier technology allows for reliable operation up to 125 C junction temperature. Typical applications are in parallel switching power supplies, converters, reverse battery protection, and redundant power subsystems. 3.35 [.132] 3.02 [.119] Modified JEDEC Outline TO-244AB Dimensions in millimeters and (inches) 1 225CNQ015 Series Bulletin PD-2.294 rev. D 07/01 Voltage Ratings Part number VR 225CNQ015 Max. DC Reverse Voltage (V) 15 VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters 225CNQ Units Conditions IF(AV) Max. Average Forward Current 220 A 50% duty cycle @ TC = 74 C, rectangular wave form A Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied * See Fig. 5 IFSM Max. Peak One Cycle Non-Repetitive 10,800 Surge Current (Per Leg) * See Fig. 7 1700 EAS Non-Repetitive Avalanche Energy (Per Leg) 9 mJ IAR Repetitive Avalanche Current (Per Leg) 2 A 5s Sine or 3s Rect. pulse TJ = 25 C, IAS = 2 Amps, L = 4.5 mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 3.0 x VR typical Electrical Specifications Parameters VFM IRM 225CNQ Units Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) Conditions Max. Reverse Leakage Current 0.38 0.49 0.32 0.42 40 V V V V mA @ 110A @ 220A @ 110A @ 220A TJ = 25 C (Per Leg) * See Fig. 2 2000 mA TJ = 125 C 1780 mA TJ = 100 C VR = 12 V 1080 mA TJ = 100 C VR = 5 V 7700 pF VR = 5VDC, (test signal range 100Khz to 1Mhz) 25C 7.0 nH From top of terminal hole to mounting plane 10,000 V/ s (1) CT Max. Junction Capacitance (Per Leg) LS Typical Series Inductance (Per Leg) dv/dt Max. Voltage Rate of Change (Rated VR) Parameters 225CNQ Units TJ Max. Junction Temperature Range -55 to 125 Tstg Max. Storage Temperature Range -55 to 150 2 TJ = 75 C VR = rated VR (1) Pulse Width < 300s, Duty Cycle <2% Thermal-Mechanical Specifications RthJC Max. Thermal Resistance Junction to Case (Per Leg) RthJC Max. Thermal Resistance Junction to Case (Per Package) RthCS Typical Thermal Resistance, Case to Heatsink wt Approximate Weight T Mounting Torque Base Min. Max. Mounting Torque Center Hole Typ. Terminal Torque Min. Max. Case Style TJ = 25 C Conditions C C 0.40 C/W DC operation * See Fig. 4 0.20 C/W DC operation 0.10 C/W Mounting surface , smooth and greased 79 (2.80) g (oz.) 24 (20) 35 (30) 13.5 (12) Kg-cm 35 (30) (Ibf-in) 46 (40) TO - 244AB Modified JEDEC www.irf.com 225CNQ015 Series Bulletin PD-2.294 rev. D 07/01 Reverse Current - R I R (mA) 10000 100 T =100C J 1000 75C 100 50C 25C 10 1 0 5 10 15 Reverse Voltage - VR (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) T =100C J T = 75C J 10000 T = 25C J 10 1 0 .1 .2 .3 .4 .5 .6 Junction Capacitance - C T (p F) Instantaneous Forward Current - I F (A) 1000 .7 T =25C J 1000 0 .8 5 10 15 20 25 Forward Voltage Drop - VFM (V) Reverse Voltage - VR (V) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) 30 Thermal Impedance Z thJC (C/W) 1 D=0.50 .1 D=0.33 D=0.25 P DM D=0.17 t 1 t2 D=0.08 Notes: 1. Dutyfactor D= t1/ t2 .01 SinglePulse (Thermal Resistance) .001 .00001 .0001 .001 2. PeakT =P xZ +T J DM thJC C .01 .1 1 10 100 t1 , Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) www.irf.com 3 225CNQ015 Series Bulletin PD-2.294 rev. D 07/01 50 225CNQ015 RthJC (DC) =0.40C/W 100 Average Power Loss (Watts) Allowable Case Temperature (C) 105 95 90 DC 85 80 75 0 40 80 120 D=0.08 D=0.17 40 D=0.25 D=0.33 D=0.50 30 RMSLimit 10 0 0 160 40 80 120 160 Average Forward Current - IF(AV) (A) Average Forward Current - IF(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) Non-Repetitive Surge Current - I FSM (A) DC 20 Fig. 6 - Forward Power Loss Characteristics (Per Leg) 10000 At Any Rated Load Condition And With Rated V RRM Applied Following Surge 1000 10 100 1000 10000 Square Wave Pulse Duration - tp (microsec) Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) L D UT IRFP460 Rg = 2 5 oh m C UR RE N T M O N ITO R H IG H -SPE ED SW IT C H FRE E-W H EEL D IO D E + V d = 25 V olt 40H FL40S02 Fig. 8 - Unclamped Inductive Test Circuit 4 www.irf.com 225CNQ015 Series Bulletin PD-2.294 rev. D 07/01 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 07/01 www.irf.com 5