74VHC04MTR - STMicroelectronics - Datasheet.Directory

1/11November 2004

■HIGH SPE ED: tPD = 3.8ns (TYP.) at V CC = 5V

■LOW POWER DISSIPATION:

ICC = 2 µA (MAX.) at TA=25°C

■HIGH NOISE IMMUNITY:

VNIH = VNIL = 28% VCC (MIN.)

■POWER DOWN PROTEC TION ON INPU TS

■SYMMETRICAL OUTPUT IMPEDANCE:

|IOH| = IOL = 8 mA (MIN)

■BALANCED PRO PAG ATION DELAYS :

tPLH ≅ tPHL

■OPERATING VOLTAGE RANGE:

VCC(O PR) = 2V to 5.5V

■PIN AND FUNCTION COMPATIBLE WITH

74 SERIE S 04

■IMPROVED L ATCH- UP IMMU NI TY

■LOW NOISE: VOLP = 0.8V (MAX.)

DESCRIPTION

The 74VHC04 is a n advanced high-s peed CM OS

HEX INVERTER fabricated with sub-micron

silicon gate and double-layer metal wiring C2MOS

technology.

The internal circuit is composed of 3 stages

includin g bu ffer output, which provides high no ise

immunity and stabl e output.

Power down protection is provided on all inputs

and 0 to 7V can be accepted on inputs with no

regard to the supply voltage. This device can be

used to interface 5V to 3V.

All inputs and outputs are equipped with

protection circui ts aga inst static discharge, giving

them 2KV ESD immunity and transient excess

voltage.

74VHC04

HEX INVERTER

Fi gure 1: Pin Connec t ion And IE C Logic Sym bol s

Table 1: Order Codes

PACKAGE T & R

SOP 74VHC04MTR

TSSOP 74VHC04TTR

TSSOPSOP

Rev. 5

74VHC04

2/11

Figure 2: Input Equivalent Circui t Table 2: Pin Description

Table 3: Trut h Tabl e

Table 4: Absolute Maximum Rating s

Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is

not implie d

Table 5: Recommen ded Operating Conditions

1) VIN f r om 30% to 70% of VCC

PIN N° SYMBOL NAME AND FUNCTION

1, 3, 5, 9, 11,

13 1A to 6A Data Inputs

2, 4, 6, 8, 10,

12 1Y to 6Y Data Outputs

7 GND Ground (0V)

14 VCC Positive Supply Voltage

Symbol Parameter Value Unit

VCC Supply Voltage -0.5 to +7.0 V

VIDC Input Voltage -0.5 to +7.0 V

VODC Output Voltage -0.5 to VCC + 0.5 V

IIK DC Input Diode Current - 20 mA

IOK DC Output Diode Current ± 20 mA

IODC Output Current ± 25 mA

ICC or IGND DC VCC or Ground Curre nt ± 75 mA

Tstg Storage Temperature -65 to +150 °C

TLLead Temperature (10 sec) 300 °C

Symbol Parameter Value Unit

VCC Supply Voltage 2 to 5.5 V

VIInput Voltage 0 to 5.5 V

VOOutput Voltage 0 to VCC V

Top Operating Temperature -55 to 125 °C

dt/dv Input Rise and Fall Time (note 1) (VCC = 3.3 ± 0.3V)

(VCC = 5.0 ± 0.5V) 0 to 100

0 to 20 ns/V

74VHC04

3/11

Table 6: DC Specifications

Table 7: AC Electrical Characteristics (Input tr = tf = 3ns )

(*) Voltage range is 3.3V ± 0.3V

(**) Voltage range is 5.0V ± 0.5V

Symbol Parameter

Test Condition Value

Unit

VCC

(V)

TA = 25°C -40 to 85°C -55 to 125°C

Min. Typ. Max. Min. Max. Min. Max.

VIH High Level Input

Voltage 2.0 1.5 1.5 1.5 V

3.0 to

5.5

0.7V

VIL Low Level Input

Voltage 2.0 0.5 0.5 0.5 V

3.0 to

5.5

0.3V

VOH High Level Output

Voltage 2.0 IO=-50 µA1.9 2.0 1.9 1.9

3.0 IO=-50 µA2.9 3.0 2.9 2.9

4.5 IO=-50 µA4.4 4.5 4.4 4.4

3.0 IO=-4 mA 2.58 2.48 2.4

4.5 IO=-8 mA 3.94 3.8 3.7

VOL Low Level Output

Voltage 2.0 IO=50 µA0.0 0.1 0.1 0.1

3.0 IO=50 µA0.0 0.1 0.1 0.1

4.5 IO=50 µA0.0 0.1 0.1 0.1

3.0 IO=4 mA 0.36 0.44 0.55

4.5 IO=8 mA 0.36 0.44 0.55

IIInput Leakage

Current 0 to

5.5 VI = 5.5V or GND ± 0.1 ± 1 ± 1 µA

ICC Quiescent Supply

Current 5.5 VI = VCC or GN D 22020µA

Symbol Parameter

Test Condition Value

Unit

VCC

(V) CL

(pF)

TA = 25°C -40 to 85°C -55 to 125°C

Min. Typ. Max. Min. Max. Min. Max.

tPLH

tPHL

Propagation Delay

Time 3.3(*) 15 5.0 8.9 1.0 10.5 1.0 10.5

3.3(*) 50 7.9 11.4 1.0 13.0 1.0 13.0

5.0(**) 15 3.8 5.5 1.0 6.5 1.0 6.5

5.0(**) 50 5.3 7.5 1.0 8.5 1.0 8.5

74VHC04

4/11

Table 8: Capacitive Characteristics

1) C PD is defined as the value of the IC’s internal equivalent capacitanc e which is calculated f rom the operating current consumption without

load. (Refer to Test Circuit). Average operating current can be obtained by the following equation. ICC(opr) = CPD x V CC x fIN + ICC/6 (per gate)

Table 9: Dynamic Sw itching Characteri stics

1) Worst case package.

2) M ax numb er of outp ut s defined as (n). Dat a i nputs ar e driven 0V to 5.0V, (n-1) outputs swi tc hi ng and one output at GND.

3) Max number of dat a inputs (n) switching. (n-1) switching 0V to 5.0V. I nputs under test swit ching: 5.0V to t hreshold (V ILD), 0V to th resh o l d

(VIHD), f=1MHz.

Fi gure 3: T est Circuit

CL = 15/50 pF or equiv alent (includes ji g and probe capacit ance)

RT = ZOUT of pulse generator (typ ically 50Ω)

Symbol Parameter

Test Condition Value

Unit

TA = 25°C -40 to 85°C -55 to 125°C

Min. Typ. Max. Min. Max. Min. Max.

CIN Input Capacitance 410 10 pF

CPD Power Dissipation

Capacitance

(note 1) 15 pF

Symbol Parameter

Test Condition Value

Unit

VCC

(V)

TA = 25°C -40 to 85°C -55 to 125°C

Min. Typ. Max. Min. Max. Min. Max.

VOLP Dynamic Low

Voltage Quiet

Output (note 1, 2) 5.0

CL = 50 pF

0.3 0.8 V

VOLV -0.8 -0.3

VIHD Dynamic High

Voltage Input

(note 1, 3) 5.0 3.5 V

VILD Dynamic Low

Voltage Input

(note 1, 3) 5.0 1.5 V

74VHC04

5/11

Figure 4: Waveform - Propagation Delays (f=1MHz; 5 0% duty cycl e )

74VHC04

6/11

DIM. mm. inch

MIN. TYP MAX. MIN. TYP. MAX.

A 1.35 1.75 0.053 0.069

A1 0.1 0.25 0.004 0.010

A2 1.10 1.65 0.043 0.065

B 0.33 0.51 0.013 0.020

C 0.19 0.25 0.007 0.010

D 8.55 8.75 0.337 0.344

E 3.8 4.0 0.150 0.157

e 1.27 0.050

H 5.8 6.2 0.228 0.244

h 0.25 0.50 0.010 0.020

L 0.4 1.27 0.016 0.050

k0°8°0°8°

ddd 0.100 0.004

SO-14 MECHANICAL DATA

0016019D

74VHC04

7/11

DIM. mm. inch

MIN. TYP MAX. MIN. TYP. MAX.

A 1.2 0.047

A1 0.05 0.15 0.002 0.004 0.006

A2 0.8 1 1.05 0.031 0.039 0.041

b 0.19 0.30 0.007 0.012

c 0.09 0.20 0.004 0.0089

D 4.9 5 5.1 0.193 0.197 0.201

E 6.2 6.4 6.6 0.244 0.252 0.260

E1 4.3 4.4 4.48 0.169 0.173 0.176

e 0.65 BSC 0.0256 BSC

K0˚ 8˚0˚ 8˚

L 0.45 0.60 0.75 0.018 0.024 0.030

TSSOP14 MECHANICAL DATA

PIN 1 IDENTIFICATION

A1 L

0080337D

74VHC04

8/11

DIM. mm. inch

MIN. TYP MAX. MIN. TYP. MAX.

A 330 12.992

C 12.8 13.2 0.504 0.519

D 20.2 0.795

N 60 2.362

T 22.4 0.882

Ao 6.4 6.6 0.252 0.260

Bo 9 9.2 0.354 0.362

Ko 2.1 2.3 0.082 0.090

Po 3.9 4.1 0.153 0.161

P 7.9 8.1 0.311 0.319

Tape & Reel SO-14 MECHANICAL DATA

74VHC04

9/11

DIM. mm. inch

MIN. TYP MAX. MIN. TYP. MAX.

A 330 12.992

C 12.8 13.2 0.504 0.519

D 20.2 0.795

N 60 2.362

T 22.4 0.882

Ao 6.7 6.9 0.264 0.272

Bo 5.3 5.5 0.209 0.217

Ko 1.6 1.8 0.063 0.071

Po 3.9 4.1 0.153 0.161

P 7.9 8.1 0.311 0.319

Tape & Reel TSSOP14 MECHANICAL DATA

74VHC04

10/11

Table 10: Revision History

Date Revisio n Descrip tion of Change s

12-Nov-2004 5 Order Codes Revision - pag. 1.

74VHC04

11/11

Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences

of use of s uc h infor mation nor for a ny infr ingeme nt o f p atent s or o ther r i ghts of t hird parti es wh ich m ay res ult fr om i ts us e. No li cens e i s gr an ted

by implication or otherwise under any patent or patent rights of S TMicroelectronics. Specifications mentioned in this publication are subject

to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not

authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.

The ST logo is a registered trademark of STMicroelectronics

All other names are the property of their respective owners

STMicroelectr onics group of companies

Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -

Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America