MCC 72 MCD 72 Thyristor Modules Thyristor/Diode Modules ITRMS = 2x180 A ITAVM = 2x115 A VRRM = 800-1800 V VRSM VRRM TO-240 AA VDSM VDRM V V 900 1300 1500 1700 1900 800 1200 1400 1600 1800 Type 1 MCC 72-08 MCC 72-12 MCC 72-14 MCC 72-16 MCC 72-18 1B Version io1 B / io8 B io1 B / io8 B io1 B / io8 B io1 B / io8 B io1 B / io8 B Conditions ITRMS, IFRMS ITAVM, IFAVM TVJ = TVJM TC = 63C; 180 sine TC = 85C; 180 sine ITSM, IFSM TVJ = 45C VR = 0 (di/dt)cr 8B 1B MCD 72-08 MCD 72-12 MCD 72-14 MCD 72-16 MCD 72-18 5 io1 B / io8 B io1 B / io8 B io1 B / io8 B io1 B / io8 B io1 B / io8 B Maximum Ratings A A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1700 1800 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1540 1640 A A TVJ = 45C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 14 450 13 500 A2s A2 s TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 11 850 11 300 A2 s A2 s 150 A/s TVJ = TVJM repetitive, IT = 250 A f = 50 Hz; tP =200 s 3 6 7 1 5 4 2 3 1 5 4 2 1 5 2 1 5 2 MCC Version 1 B MCD Version 1 B 3 6 MCC Version 8 B 3 MCD Version 8 B non repetitive, IT = ITAVM 500 A/s Features 2 (dv/dt)cr TVJ = TVJM; VDR = /3 VDRM RGK = ; method 1 (linear voltage rise) PGM TVJ = TVJM; IT = ITAVM; 1000 tP = 30 s tP = 300 s V/s 10 5 W W PGAV 0.5 W VRGM 10 V TVJ TVJM Tstg -40...+125 125 -40...+125 C C C 3000 3600 V~ V~ VISOL 50/60 Hz, RMS; IISOL 1 mA; Md Mounting torque (M5) Terminal connection torque (M5) Weight 4 8B 180 115 85 VD = 2/3 VDRM IG = 0.45 A diG/dt = 0.45 A/s 7 t = 1 min t=1s 2.5-4.0/22-35 Nm/lb.in. 2.5-4.0/22-35 Nm/lb.in. Typical including screws 90 Data according to IEC 60747 and refer to a single thyristor/diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions (c) 2004 IXYS All rights reserved g * International standard package, JEDEC TO-240 AA * Direct copper bonded Al2O3 -ceramic base plate * Planar passivated chips * Isolation voltage 3600 V~ * UL registered, E 72873 * Gate-cathode twin pins for version 1B Applications * DC motor control * Softstart AC motor controller * Light, heat and temperature control Advantages * Space and weight savings * Simple mounting with two screws * Improved temperature and power cycling * Reduced protection circuits 419 Version Symbol i2dt 6 3 2 1-4 http://store.iiic.cc/ MCC 72 MCD 72 Symbol Conditions IRRM, IDRM TVJ = TVJM; VR = VRRM; VD = VDRM VT /VF IT /IF = 300 A; TVJ = 25C 1.74 V VT0 rT For power-loss calculations only (TVJ = 125C) 0.85 3.2 V m VGT VD = 6 V; IGT VD = 6 V; 2.5 2.6 150 200 V V mA mA VGD IGD TVJ = TVJM; 0.2 10 V mA IL TVJ = 25C; tP = 10 s; VD = 6 V IG = 0.45 A; diG/dt = 0.45 A/s 450 mA IH TVJ = 25C; VD = 6 V; RGK = 200 mA tgd TVJ = 25C; VD = 1/2 VDRM IG = 0.45 A; diG/dt = 0.45 A/s 2 s tq TVJ = TVJM; IT = 150 A, tP = 200 s; -di/dt = 10 A/s VR = 100 V; dv/dt = 20 V/s; VD = 2/3 VDRM typ. 185 s QS IRM TVJ = TVJM; IT /IF = 50 A, -di/dt = 6 A/s 170 45 C A RthJC per per per per 0.3 0.15 0.5 0.25 K/W K/W K/W K/W 12.7 9.6 50 mm mm m/s2 RthJK dS dA a Characteristic Values TVJ TVJ TVJ TVJ 5 = 25C = -40C = 25C = -40C VD = 2/3 VDRM thyristor/diode; DC current module thyristor/diode; DC current module other values see Fig. 8/9 Creepage distance on surface Strike distance through air Maximum allowable acceleration mA Fig. 1 Gate trigger characteristics Optional accessories for module-type MCC 72 version 1 B Keyed gate/cathode twin plugs with wire length = 350 mm, gate = yellow, cathode = red Type ZY 200L (L = Left for pin pair 4/5) UL 758, style 1385, Type ZY 200R (R = right for pin pair 6/7) CSA class 5851, guide 460-1-1 Fig. 2 Gate trigger delay time Dimensions in mm (1 mm = 0.0394") MCC Version 8 B MCD Version 8 B 419 MCC / MCD Version 1 B IXYS reserves the right to change limits, test conditions and dimensions (c) 2004 IXYS All rights reserved 2-4 http://store.iiic.cc/ MCC 72 MCD 72 Fig. 3 Surge overload current ITSM, IFSM: Crest value, t: duration Fig. 4 i2dt versus time (1-10 ms) Fig. 4a Maximum forward current at case temperature Fig. 5 Power dissipation versus onstate current and ambient temperature (per thyristor or diode) IXYS reserves the right to change limits, test conditions and dimensions (c) 2004 IXYS All rights reserved 419 Fig. 6 Three phase rectifier bridge: Power dissipation versus direct output current and ambient temperature 3-4 http://store.iiic.cc/ MCC 72 MCD 72 Fig. 7 Three phase AC-controller: Power dissipation versus RMS output current and ambient temperature Fig. 8 Transient thermal impedance junction to case (per thyristor or diode) RthJC for various conduction angles d: RthJC (K/W) d DC 180 120 60 30 0.3 0.31 0.33 0.35 0.37 Constants for ZthJC calculation: i 1 2 3 Rthi (K/W) ti (s) 0.008 0.054 0.238 0.0019 0.047 0.3 Fig. 9 Transient thermal impedance junction to heatsink (per thyristor or diode) RthJK for various conduction angles d: RthJK (K/W) d DC 180 120 60 30 0.5 0.51 0.53 0.55 0.57 Constants for ZthJK calculation: i Rthi (K/W) ti (s) 0.008 0.054 0.238 0.2 0.0019 0.047 0.3 1.25 419 1 2 3 4 IXYS reserves the right to change limits, test conditions and dimensions (c) 2004 IXYS All rights reserved 4-4 http://store.iiic.cc/