EZ-LIGHT(R) K50L Series with Independent Push Button Contact Compact Indicator with One, Two, or Three Colors and a Momentary Push Button Output For the latest technical information about this product, including specifications, dimensions, and wiring, see www.bannerengineering.com. * * * * * * * Rugged, cost-effective and easy-to-install multicolor indicator light with pushbutton Waterproof IP65 construction for washdown environments Excellent for panel mounting or as a stand-alone device Immune to EMI and RFI interference 12 to 30V dc operation Cabled and Quick Disconnect models available Up to 3 independent colors in one unit Models Family Color 1 Color 2 Color 3 Input Output Connector1 K50L G R Y P PB2 Q P = PNP PB2 = Momentary Push Button G = Green R = Red Y = Yellow B = Blue W = White O = Orange T = Turquoise V = Violet M = Magenta X = No color in this position MODEL KEY Example Model K50LGXXPPB2Q K50LRXXPPB2Q K50LGRXPPB2Q K50LGYXPPB2Q K50LGRYPPB2Q # of LED Colors 1 2 3 LED Indicators Green Red Green, Red Green, Yellow Green, Red, Yellow Q = Euro QD Blank = 2 meter cable QP = Euro Pigtail QD Connection 4-pin Euro integral QD Connector 5-pin Euro integral QD Connector 8-pin Euro integral QD Connector WARNING: Not To Be Used for Personnel Protection Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. 1 Integral QD models only are listed. * For integral 2 m (6.5 ft) PVC cable, omit suffix Q from model number (example, K50LGXXPPB2). * For 150 mm (6 in) PVC pigtail with QD, replace Q with QP in model number (example, K50LGXXPPB2QP). * A model with a QD requires a mating cordset (see Quick-Disconnect (QD) Cordsets on page 4). P/N 168310 Rev. C 6/18/2013 0 168310 1 EZ-LIGHT(R) K50L Series Installation Install the K50 sensor at such a height and in a location that will be easy for the user and/or supervisor to see the indicator and comfortable for the user to press the pushbutton. Specifications Supply Voltage and Current Operating Voltage: 12 to 30V dc Current: 65 mA at 12 Vdc; 35 mA at 30 Vdc max. current per LED color Mounting Torque 2.25 Nm (20 in-lbf) max. Supply Protection Circuitry Protected against transient voltages and reverse polarity Connections Integral Euro-style QD fitting, PVC-jacketed 2 m (6.5 ft) cable or 150 mm (6 in) PVC pigtail with QD, depending on model Switch Contact Rating 150 mA at 30V dc Operating Temperature -40 to +50 C (-40 to +122 F) Contact Bounce 10 ms max. Max. Relative Humidity 90% at +50 C max. relative humidity (non-condensing) Environmental Rating IEC IP65 Storage Temperature -40 to +70 C (-40 to +158 F) Construction Base: polycarbonate Translucent dome: polycarbonate Push button: thermoplastic Certifications Dimensions All measurements are in mm (in). 2 www.bannerengineering.com - tel: 763-544-3164 P/N 168310 Rev. C EZ-LIGHT(R) K50L Series Hookups 4-Pin Models Sourcing (PNP) Input Key 1 = Brown Indicator Color C1 2 = White 3 4 10-30V dc 4 = Black C1 = Color 1 1 PB 3 = Blue PB = Push Button 2 5-Pin Models Sourcing (PNP) Input Key 1 = Brown Indicator Color C1 C2 3 4 2 = White 10-30V dc 4 = Black 5 = Gray 1 C1 = Color 1 2 PB 3 = Blue C2 = Color 2 PB = Push Button 5 8-Pin Models Sourcing (PNP) Input Indicator Color C1 C2 C3 7 6 2 4 1 PB P/N 168310 Rev. C Key 10-30V dc 1 = White C1 = Color 1 2 = Brown C2 = Color 2 3 = Green (not used) C3 = Color 3 4 = Yellow PB = Push Button 5 = Gray 6 = Pink 7 = Blue 8 = Red (not used) 5 www.bannerengineering.com - tel: 763-544-3164 3 EZ-LIGHT(R) K50L Series Accessories Quick-Disconnect (QD) Cordsets 4-Pin Threaded M12/Euro-Style Cordsets Model Length MQDC-406 1.83 m (6 ft) MQDC-415 4.57 m (15 ft) MQDC-430 9.14 m (30 ft) Style Dimensions Pinout 3 4 Straight MQDC-450 2 1 44 Typ. M12 x 1 o 14.5 15.2 m (50 ft) 1 = Brown 2 = White 3 = Blue 4 = Black 5-Pin Threaded M12/Euro-Style Cordsets (Single Ended) Model Length MQDC1-501.5 0.50 m (1.5 ft) MQDC1-506 1.83 m (6 ft) MQDC1-515 4.57 m (15 ft) MQDC1-530 9.14 m (30 ft) MQDC1-506RA 1.83 m (6 ft) MQDC1-515RA 4.57 m (15 ft) Style Dimensions 2 44 Typ. 1 3 Straight 4 M12 x 1 o 14.5 32 Typ. [1.26"] 5 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray 30 Typ. [1.18"] Right-Angle MQDC1-530RA Pinout (Female) 9.14 m (30 ft) M12 x 1 o 14.5 [0.57"] 8-Pin Threaded M12/Euro-Style Cordsets with Shield Model Length Style Dimensions Pinout 2 MQDC-806 1.83 m (6 ft) 1 7 6 44 Typ. Straight MQDC-815 4.57 m (15 ft) MQDC-830 9.14 m (30 ft) 4 M12 x 1 o 14.5 www.bannerengineering.com - tel: 763-544-3164 1 = White 2 = Brown 3 = Green 4 = Yellow 3 4 8 5 5 = Gray 6 = Pink 7 = Blue 8 = Shield P/N 168310 Rev. C EZ-LIGHT(R) K50L Series Brackets All measurements are in mm SMB30A SMB30FA 45 * Right-angle bracket with curved slot for versatile orientation * Clearance for M6 (1/4 in) hardware * Mounting hole for 30 mm sensor * 12-ga. stainless steel C 61 B A 69 Hole center spacing: A to B=40 Hole size: A=o 6.3, B= 27.1 x 6.3, C=o 30.5 83.2 36.3 68.9 B A Bolt thread: SMB30FA, A= 3/8 - 16 x 2 in; SMB30FAM10, A= M10 - 1.5 x 50 Hole size: B= o 30.1 SMB30MM * 12-ga. stainless steel bracket with curved mounting slots for versatile orientation * Clearance for M6 (1/4 in) hardware * Mounting hole for 30 mm sensor * Swivel bracket with tilt and pan movement for precise adjustment * Mounting hole for 30 mm sensor * 12-ga. 304 stainless steel * Easy sensor mounting to extrude rail T-slot * Metric and inch size bolt available SMB30SC 57 70 C 57 B A Hole center spacing: A = 51, A to B = 25.4 Hole size: A = 42.6 x 7, B = o 6.4, C = o 30.1 * Swivel bracket with 30 mm mounting hole for sensor * Black reinforced thermoplastic polyester * Stainless steel mounting and swivel locking hardware included 67 B 58 29 A Hole center spacing: A=o 50.8 Hole size: A=o 7.0, B=o 30.0 Banner Engineering Corp Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. www.bannerengineering.com - tel: 763-544-3164