Type 01005 0201 0402 0603 0805 1206 1210 1812 2010 2512
Size 0402 0603 1005 1608 2012 3216 3225 4532 5025 6432
Max. Working Voltage 15V 25V 50V 75V 150V 200V 200V 200V 200V 200V
Max. Overload Voltage 30V 50V 100V 150V 300V 400V 500V 500V 500V 500V
Dielectric withstanding Voltage - - 100V 300V 500V 500V 500V 500V 500V 500V
Operating Temperature -55~+125°C -55~+155°C -55~+155°C -55~+155°C -55~+155°C -55~+155°C -55~+155°C -55~+155°C -55~+155°C -55~+155°C
Small size & light weight
Save assembly cost.
Suitable for both wave & re-flow soldering.
Applications: Navigator, Mobile Phone,Telecom, PDA, Setbox, Meter.
Feature
Figures Derating Curve & Specification
Thick Film Chip Resistors
Type 01005 0201 0402 0603 0805 1206 1210 1812 2010 2512
Dimension
L(mm) 0.40±0.02 0.60±0.03 1.00±0.10 1.60±0.10 2.00±0.15 3.10±0.15 3.10±0.10 4.50±0.20 5.00±0.10 6.35±0.10
W(mm) 0.20±0.02 0.30±0.03 0.50±0.05 0.80±0.10 1.25 +0.15
-0.10 1.55 +0.15
-0.10 2.60±0.20 3.20±0.20 2.50±0.20 3.20±0.20
H(mm) 0.13±0.02 0.23±0.03 0.35±0.05 0.45±0.10 0.55±0.10 0.55±0.10 0.55±0.10 0.55±0.20 0.55±0.10 0.55±0.10
A(mm) 0.10±0.03 0.10±0.05 0.20±0.10 0.30±0.20 0.40±0.20 0.45±0.20 0.50±0.25 0.50±0.20 0.60±0.25 0.60±0.25
B(mm) 0.10±0.03 0.15±0.05 0.25±0.10 0.30±0.20 0.40±0.20 0.45±0.20 0.50±0.20 0.50±0.20 0.50±0.20 0.50±0.20
Resistance Value of Jumper <50mΩ
Rated Current of Jumper 0.5A 0.5A 1A 1A 2A 2A 2A 2A 2A 2A
Max.Overload Current of Jumper 1A 1A 2A 2A 5A 10A 10A 10A 10A 10A
Type 01005 0201 0402 0603 0805 1206 1210 1812 2010 2512
Power Rating at 70°C 1/32W 1/20W 1/16W 1/10W 1/8W 1/4W 1/4W 1/3W 1/2W 3/4W 3/4W 1W
Resistance Range of 0.5%(E-96) - - 1Ω~10MΩ 1Ω~10MΩ 1Ω~10MΩ - 1Ω~10MΩ - 1Ω~10MΩ 1Ω~10MΩ 1Ω~10MΩ 1Ω~10MΩ
Resistance Range of 1%,2%(E-96) 10Ω ~
10MΩ
1Ω~
10MΩ
0.01Ω~
10MΩ
0.1Ω≤R
<10MΩ
0.01Ω ≤R
<0.1 Ω
0.1Ω≤R
<10MΩ
0.01Ω≤R
<0.1Ω 0.01Ω~10MΩ
Resistance Range of 5%(E-24) 1Ω~10MΩ 0.01Ω~
10MΩ
0.1Ω≤R
<10MΩ
0.01Ω ≤R
<0.1 Ω
0.1Ω≤R
<10MΩ
0.01Ω≤R
<0.1Ω 0.01Ω~10MΩ
Ambient temperature (°C)
Percent rated load (%)
01005 0201~2512
1. High purity Alumina substrate
2. Protective coating
3. Resistance element
4. Termination (Inner) Ni / Cr
5. Termination (Between) Ni Barrier
6. Termination (Outer) Sn
L
W
H
H
L
W
A
B
6
Value Code Value Code Value Code Value Code Value Code Value Code
100 01 147 17 215 33 316 49 464 65 681 81
102 02 150 18 221 34 324 50 475 66 698 82
105 03 154 19 226 35 332 51 487 67 715 83
107 04 158 20 232 36 340 52 499 68 732 84
110 05 162 21 237 37 348 53 511 69 750 85
113 06 165 22 243 38 357 54 523 70 768 86
115 07 169 23 249 39 365 55 536 71 787 87
118 08 174 24 255 40 374 56 549 72 806 88
121 09 178 25 261 41 383 57 562 73 825 89
124 10 182 26 267 42 392 58 576 74 845 90
127 11 187 27 274 43 402 59 590 75 866 91
130 12 191 28 280 44 412 60 604 76 887 92
133 13 196 29 287 45 422 61 619 77 909 93
137 14 200 30 294 46 432 62 634 78 931 94
140 15 205 31 301 47 442 63 649 79 953 95
143 16 210 32 309 48 453 64 665 80 976 96
Thick Film Chip Resistors
For 01005, 0201, 0402 size, no marking on the body due to the small size of the resistor.
±5% tolerance product: the marking is 3 digits, the first 2 digits are the significant of the resistance and the
3rd digit denotes number of zeros following.
0805, 1206, 1210, 2010, 2512 ≤±1%: the marking is 4 digits, the first 3 digits are the significant of the
resistance and the 4th digit denotes number of zeros following.
• Standard E-96 series values of 0603 ≤±1%: due to the small size of the resistor’s body, 3 digits marking will
be used to indicate the accurate resistance value by using the following Multiplier & Resistance Code.
Marking on the Resistors Body
2372
2372 = 23700Ω = 23.7KΩ
3R24
Below 10Ω : 3R24 = 3.24Ω
153 153 = 15000Ω = 15KΩ
6R8Below 10Ω: 6R8 = 6.8Ω
Multiplier Code (for 0603 ≤±1% marking)
So the resistance value are marked as the following examples:
29B 1.96KΩ= 196 ×101 Ω = 29B 10X 12.4Ω= 124 ×10 -1 = 10X
122 680
Standard E-24 and not belong to E-96 series values (≤±1%) of 0603 size: the marking is the same as 5% tolerance but marking as underline.
122 = 1200 = 1.2 KΩ 680 = 68Ω
Standard E-96 series Resistance Value code (for 0603±1% marking)
Code A B C D E F G H X Y Z
Power 10010110210310410510610710-1 10-2 10-3
7
• Resistance value which doesn't belong to E-24 and E-96 Series Standard Values is available case by case.
Special Feature:
E = Lead Free (standard)
Packing Qty.:
1=1,000pcs
2=2,000pcs
3=3,000pcs
4=4,000pcs
5=5,000pcs
C=10,000pcs
D=20,000pcs
E=15,000pcs
H=50,000pcs
J=60,000pcs
Packing Type:
T = T/R
B = Bulk in Poly bag
C = Bulk in cassette
Resistance Value :
5% (E-24 series) :
the 1st digit is “0”, the 2nd & 3rd digits are for the significant figures of the resistance and the 4th
indicate the numbers of zeros following
≤1%( E-24, E-96 series):
the 1st to 3rd digits are for the significant figures of the resistance and the 4th indicate the numbers of
zeros following
Tolerance:
D = ±0.5%
F = ±1%
G = ±2%
J = ±5%
Wattage:
Fill-in 2 digits with the codes as follow:
WH = 1/32W WM = 1/20W WG = 1/16W
WA = 1/10W W8 = 1/8W W4 = 1/4W
W2 = 1/2W 07 = 3/4W 1W = 1W
Product Type:
Fill-in 4 digits
with the Chip
resistor type as
follow :
0105(01005),
0201, 0402,
0603, 0805,
1206, 1210,
1812, 2010,
2512, 2D02
Ordering Procedure (Example: 1206 1/4W 5% 1.2 Ω T/R-5000)
1206W4J012JT5E
Performance Specifications
Thick Film Chip Resistors
Temperature coefficient
01005: 1Ω≤R<10Ω: -200~+600ppm/°C
10Ω≤R<100Ω: ±300ppm/°C
100Ω≤R≤10MΩ: ±200ppm/°C
0201: 1Ω≤R≤10Ω: -100~+350ppm/°C
>10Ω: ±200ppm/°C
0402: 1Ω≤R≤10Ω: ±200ppm/°C
>10Ω: ±100ppm/°C
0603: 0.01Ω≤R≤0.03Ω:±1500PPM/°C
0.03Ω<R≤0.05Ω:±1000 PPM/°C
0.05Ω<R<1Ω:±800PPM/°C
1Ω≤R≤10Ω: ±200PPM/°C
>10Ω:±100PPM/°C
0805, 1206, 1210, 1812, 2010, 2512:
0.01Ω ≤ R ≤0.015Ω: ±1500ppm/°C
0.015Ω < R ≤0.03Ω:±1000ppm/°C
0.03Ω < R <1Ω: ±800ppm/°C
1Ω≤R≤10Ω: ±200ppm/°C
>10Ω: ±100ppm/°C
Short-time overload
±5%, ± 2%: ±(2.0% + 0.05Ω)
±1%, ± 0.5%: ±(1.0% + 0.05Ω)
01005 ±5% ±1% : ±(2.0% + 0.05Ω)
Insulation resistance ≥ 1,000 MΩ
Dielectric withstanding voltage No evidence of flashover, mechanical damage, arcing or insulation breakdown
Terminal bending ±(1.0% + 0.05Ω)
Soldering heat ±(1.0% + 0.05Ω)
Solderability Coverage must be over 95%.
Rapid change of temperature
±5%, ± 2%: ±(1.0% + 0.05Ω)
±1%, ± 0.5%: ±(0.5% + 0.05Ω)
01005 ±5% ±1% : ±(1.0% + 0.05Ω)
Humidity (Steady State)
±5%, ± 2%: ±(3.0% + 0.05Ω)
±1%, ± 0.5%: ±(0.5% + 0.05Ω)
01005 ±5% ±1% (-55°C~125°C): ±(2.0% + 0.05Ω)
Load life in humidity
±5%, ± 2%: ±(3.0% + 0.05Ω)
±1%, ± 0.5%: ±(1% + 0.05Ω
01005: ±(3.0% + 0.05Ω)
Load life
±5%, ± 2%: ±(3.0% + 0.05Ω)
±1%, ± 0.5%: ±(1% + 0.05Ω)
01005: ±(3.0% + 0.05Ω)
Remark: For more details, please check page 135, Part No. System
8