DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R 6.3 V TO 50 V 10 nF to 100 F Product Specification - Oct 27, 2009 V.3 RoHS compliant Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X5R 6.3 V to 50 V 2 18 SCOPE ORDERING INFORMATION - GLOBAL PART NUMBER, PHYCOMP This specification describes X5R series chip capacitors with leadfree terminations. All part numbers are identified by the series, size, tolerance, TC material, packing style, voltage, process code, termination and capacitance value. APPLICATIONS PCs, Hard disk, Game PCs Power supplies DVDs, Camcorders Mobile phones Data processing FEATURES Supplied in tape on reel Nickel-barrier end termination RoHS compliant Halogen Free compliant CTC & 12NC YAGEO BRAND ordering code GLOBAL PART NUMBER CC XXXX X X (1) X5R (2) (3) X ( PREFERRED ) BB (4) XXX (5) (1) SIZE - INCH BASED (METRIC) 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3225) 1812 (4532) (2) TOLERANCE K = 10% M = 20% (3) PACKING STYLE R = Paper taping reel; Reel 7 inch K = Blister taping reel; Reel 7 inch P = Paper taping reel; Reel 13 inch F = Blister taping reel; Reel 13 inch C = Bulk case (4) RATED VOLTAGE 4=4V 5 = 6.3 V 6 = 10 V 7 = 16 V 8 = 25 V 9 = 50 V (5) CAPACITANCE VALUE 2 significant digits+number of zeros The 3rd digit signifies the multiplying factor, and letter R is decimal point Example: 103 = 10 x 103 = 10,000 pF = 10 nF www.yageo.com Oct 27, 2009 V.3 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X5R 6.3 V to 50 V 3 18 PHYCOMP BRAND ordering codes GLOBAL PART NUMBER (preferred), PHYCOMP CTC (for North America) and 12NC (traditional) codes are acceptable to order Phycomp brand products. GLOBAL PART NUMBER ( PREFERRED ) For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2. 12NC CODE 2 2 XX XX X X X X XX Capacitance value(1) Carrier type 50 = Blister (6.3 V) 55 = Paper (6.3 V) 38 = Paper (10 V) 22 = Blister (10 V) 54 = Bulk Tolerance 6 = 10% 7 = 20% Rated voltage - Termination 18 = 4 V 20 = 6.3 V 24 = 10 V 78 = 16 V 91 = 25 V 58 = 50 V Temperature characteristic 3 = X5R Packaging(2) 1 = reel: 180 mm; 7" 5 = reel: 330 mm; 13" 4 = bulk case YNM0011 Size 8 = 0201 7 = 0402 6 = 0603 0 = 0805 1 = 1206 2 = 1210 4 = 1812 (1) Please refer to "Last 2-digit of 12NC" in "CAPACITANCE RANGE & THICKNESS FOR X5R" (2) Quantity on reel depends on thickness classification; see table 5 PHYCOMP CTC CODE ( FOR NORTH AMERICA ) Example: 06032B225M5B20D 0603 2B 225 M 5 B 2 0 D Size code Temp. Char. Capacitance in pF Tolerance Voltage Termination Packing Marking Range identifier 0201 2B = X5R 0402 0603 0805 1206 1210 1812 101 = 100 pF; the third digit signifies the multiplying factor: 0=x1 1 = x 10 2 = x 100 K = 10% 4=4V M = 20% 5 = 6.3 V 6 = 10 V 7 = 16 V 8 = 25 V 9 = 50 V B = NiSn 2 = 180 mm 7" paper 0 = no marking D = Class 2 MLCC 3 = 330 mm 13" paper B = 180 mm 7" blister 3 = x 1,000 F = 330 mm 13" blister 4 = x 10,000 P = Bulk case 5 = x 100,000 6 = x 1,000,000 7 = x 10,000,000 www.yageo.com Oct 27, 2009 V.3 4 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X5R 6.3 V to 50 V 18 CONSTRUCTION The capacitor consists of a rectangular block of ceramic dielectric in which a number of interleaved metal electrodes are contained. This structure gives rise to a high capacitance per unit volume. The inner electrodes are connected to the two end terminations and finally covered with a layer of plated tin (NiSn). The terminations are lead-free. A cross section of the structure is shown in Fig.1. terminations electrodes MLB457 ceramic material Fig. 1 Surface mounted multilayer ceramic capacitor construction DIMENSION Table 1 For outlines see fig. 2 TYPE L1 (mm) W (mm) 0201 0402 0603 0.6 0.03 1.0 0.05 1.6 0.10 0805 1206 1210 T (MM) 0.3 0.03 0.10 0.20 0.20 0.5 0.05 0.20 0.30 0.40 0.8 0.10 0.20 0.60 0.40 0.25 0.75 0.55 1.25 0.10 (1) 2.0 0.20 1.25 0.20 (2) 3.2 0.15 (1) 1.6 0.15 (1) 3.2 0.20 (2) 1.6 0.20 (2) 3.2 0.20 (1) 2.5 0.20 (1) 3.2 0.30 (2) 2.5 0.30 (2) (3) (3) 4.5 0.40 (2) L4 (mm) max. (2) 4.5 0.20 (1) L2 / L3 (mm) min. 2.0 0.10 (1) 3.2 0.40 1812 OUTLINES 2.5 0.30 3.2 0.20 min. For dimension see Table 1 W T L2 L4 L1 Refer to table 2 to 4 0.25 0.75 L3 MBB211 1.40 Fig. 2 Surface mounted multilayer ceramic capacitor dimension 0.25 0.75 1.40 0.25 0.75 2.20 NOTE 1. Dimension for size 0805 to 1812, C < 1 F 2. Dimension for size 0805 to 1812, C 1 F 3. Dimension for size 1210, C = 100 F www.yageo.com Oct 27, 2009 V.3 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X5R 6.3 V to 50 V 5 18 CAPACITANCE RANGE & THICKNESS FOR X5R Table 2 Sizes from 0201 to 0402 CAP. Last 2-digit of 0201 12NC 6.3 V 10 nF 36 15 nF 38 22 nF 41 33 nF 43 47nF 45 68 nF 47 100 nF 49 150 nF 52 0402 10 V 16 V 0.30.03 0.30.03 6.3 V 10 V 16 V 25 V 0.30.03 0.50.05 0.50.05 0.30.03 0.50.05 0.50.05 220 nF 54 330 nF 56 470 nF 58 680 nF 61 1.0 F 63 2.2 F 67 4.7 F 72 10 F 76 22 F 81 47 F 85 100 F 89 NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-6 series is on request www.yageo.com Oct 27, 2009 V.3 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X5R 6.3 V to 50 V 6 18 CAPACITANCE RANGE & THICKNESS FOR X5R Table 3 Sizes from 0603 to 0805 CAP. Last 2-digit of 0603 12NC 6.3 V 10 nF 36 15 nF 38 22 nF 41 33 nF 43 47nF 45 68 nF 47 100 nF 49 150 nF 52 220 nF 54 330 nF 56 470 nF 58 680 nF 61 1.0 F 63 2.2 F 67 4.7 F 72 0805 10 V 16 V 25 V 6.3 V 10 V 16 V 25 V 0.80.1 0.80.1 0.80.1 0.80.1 0.850.1 1.250.2 0.850.1 1.250.2 0.850.1 1.250.2 1.250.2 0.850.1 1.250.2 1.250.2 1.250.2 10 F 76 22 F 81 47 F 85 100 F 89 0.80.15 1.250.2 NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-6 series is on request www.yageo.com Oct 27, 2009 V.3 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X5R 6.3 V to 50 V 7 18 CAPACITANCE RANGE & THICKNESS FOR X5R Table 4 Sizes from 1206 to 1812 CAP. Last 2-digit of 1206 12NC 6.3 V 10 V 16 V 1.150.1 1.150.1 1.150.1 1.60.2 1.60.2 10 nF 36 15 nF 38 22 nF 41 33 nF 43 47 nF 45 68 nF 47 100 nF 49 150 nF 52 220 nF 54 330 nF 56 470 nF 58 680 nF 61 1.0 F 63 2.2 F 67 4.7 F 72 10 F 76 22 F 81 47 F 85 1210 25 V 6.3 V 1812 10 V 16 V 25 V 1.90.2 1.90.2 6.3 V 1.150.1 1.60.2 1.60.2 1.90.2 2.00.2 2.00.2 (3) 2.50.2 (3) 2.50.2 2.50.2 2.50.2 2.50.2 100 F 89 3.20.3 NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-6 series is on request 3. For special ordering code, please contact local sales force before order www.yageo.com Oct 27, 2009 V.3 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X5R 6.3 V to 50 V 8 18 THICKNESS CLASSES AND PACKING QUANTITY Table 5 SIZE CODE THICKNESS CLASSIFICATION TAPE WIDTH QUANTITY PER REEL 0201 0.3 0.03 mm 0402 0603 0805 1206 O180 MM / 7 INCH O330 MM / 13 INCH Paper Blister Paper Blister QUANTITY PER BULK CASE 8 mm 15,000 --- 50,000 --- --- 0.5 0.05 mm 8 mm 10,000 --- 50,000 --- 50,000 0.8 0.1 mm 8 mm 4,000 --- 15,000 --- 15,000 0.6 0.1 mm 8 mm 4,000 --- 20,000 --- 10,000 0.85 0.1 mm 8 mm 4,000 --- 15,000 --- 8,000 1.25 0.2 mm 8 mm --- 3,000 --- 10,000 5,000 0.6 0.1 mm 8 mm 4,000 --- 20,000 --- --- 0.85 0.1 mm 8 mm 4,000 --- 15,000 --- --- 1.00 / 1.15 0.1 mm 8 mm --- 3,000 --- 10,000 --- 1.25 0.2 mm 8 mm --- 3,000 --- 10,000 --- 1.6 0.15 mm 8 mm --- 2,500 --- 10,000 --- 1.6 0.2 mm 8 mm --- 2,000 --- 10,000 --- 1210 0.6 / 0.7 0.1 mm 8 mm --- 4,000 --- 15,000 --- 0.85 0.1 mm 8 mm --- 4,000 --- 10,000 --- 1.15 0.1 mm 8 mm --- 3,000 --- 10,000 --- 1.15 0.15 mm 8 mm --- 3,000 --- 10,000 --- 1.25 0.2 mm 8 mm --- 3,000 --- --- --- 1.5 0.1 mm 8 mm --- 2,000 --- --- --- 1.6 / 1.9 0.2 mm 8 mm --- 2,000 --- --- --- 2.0 0.2 mm 8 mm --- 2,000 1,000 --- --- --- 2.5 0.2 mm 8 mm --- 1,000 500 --- --- --- 1.15 0.15 mm 12 mm --- 3,000 --- --- --- 1.25 0.2 mm 12 mm --- 3,000 --- --- --- 1.35 0.15 mm 12 mm --- 2,000 --- --- --- 1.5 0.1 mm 12 mm --- 2,000 --- --- --- 1.6 0.2 mm 12 mm --- 2,000 --- --- --- 2.0 0.2 mm 12 mm --- 2,000 --- --- --- 0.6 / 0.85 0.1 mm 12 mm --- 2,000 --- --- --- 1808 1812 1.15 0.1 mm 12 mm --- 1,500 --- --- --- 1.15 0.15 mm 12 mm --- 1,500 --- --- --- 1.35 0.15 mm 12 mm --- 1,000 --- --- --- 1.5 0.1 mm 12 mm --- 1,000 --- --- --- 1.6 0.2 mm 12 mm --- 1,000 --- --- --- 2.0 0.2 mm 12 mm --- 1,000 --- --- --- 2.5 0.2 mm 12 mm --- 500 50,000 --- --- www.yageo.com Oct 27, 2009 V.3 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X5R 6.3 V to 50 V 9 18 ELECTRICAL CHARACTERISTICS X5R DIELECTRIC CAPACITORS; NISN TERMINATIONS Unless otherwise stated all electrical values apply at an ambient temperature of 201 C, an atmospheric pressure of 86 to 106 kPa, and a relative humidity of 63 to 67%. Table 6 VALUE DESCRIPTION Capacitance range 10 nF to 100 F Capacitance tolerance 10% and 20% Dissipation factor (D.F.) 6.3 V 5% Exception: 0402 180 nF; 1210 22 F 0201 12 nF; 0402 330 nF; 0603 2.2 F; 0805 1 F; 7% 10% 1206 22 F 0805 15 F; 1210 100 F 10 V 15% 5% Exception: 0402 180 nF; 0805 1 F; 7% 1206 6.8 F 0201 100 nF; 0402 330 nF; 0603 1 F; 0805 2.2 F; 10% 1206 10 F 16 V 5% Exception: 0402 180 nF; 0603 680 nF; 0805 1 F; 1206 6.8 F 0402 330 nF; 0603 2.2 F; 0805 10 F; 1206 10 F; 7% 10% 1210 10 F 25 V 3.5% Exception: 0402 27 nF; 0603 220 nF; 0805 2.2 F; 1206 4.7 F; 5% 1210 10 F 0402 180 nF 0805 4.7 F; Insulation resistance after 1 minute at Ur (DC) 7% 1206 10 F 10% Rins 10 G or Rins x Cr 500 seconds whichever is less Maximum capacitance change as a function of temperature (temperature characteristic/coefficient): Operating temperature range: 15% -55 C to +85 C www.yageo.com Oct 27, 2009 V.3 Product specification Surface-Mount Ceramic Multilayer Capacitors C C (%) YNM0021 15 General Purpose & High Cap. 10 0 C C (%) -15 5 -30 0 -45 X5R 6.3 V to 50 V 10 18 YNM0022 6.3 V -5 -60 -10 -75 10 V 16 V 25 V -15 -60 Fig. 3 -35 -90 -10 15 40 65 90 T (oC) 0 Fig. 4 Typical capacitance change as a function of temperature 5 10 15 20 25 30 VDC (V) Typical capacitance change with respect to the capacitance at 1 V as a function of DC voltage at 20 C YNM0023 1800 tan (x 10-4) 1200 600 0 -55 Fig. 5 -25 5 35 55 95 T (C) 125 Typical tan as a function of temperature www.yageo.com Oct 27, 2009 V.3 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X5R 6.3 V to 50 V 11 18 Size 0402 1 F / 10 V Solid lines: Impedance / Dotted lines: ESR YNM0024 100.00 Z () 10.00 1.00 0.10 0.01 0.00 0.01 0.10 1.00 10.00 f (MHz) 100.00 Fig. 6 Impedance ESR vs. frequency characteristics for multilayer chip capacitors Size 0603 1 F / 10 V Solid lines: Impedance / Dotted lines: ESR YNM0025 100.00 Z () 10.00 1.00 0.10 0.01 0.00 0.01 0.10 1.00 10.00 f (MHz) 100.00 Fig. 7 Impedance ESR vs. frequency characteristics for multilayer chip capacitors www.yageo.com Oct 27, 2009 V.3 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X5R 6.3 V to 50 V 12 18 Size 0805 10 F / 6.3 V Solid lines: Impedance / Dotted lines: ESR YNM0028 100.00 Z () 10.00 1.00 0.10 0.01 0.00 0.01 0.10 1.00 10.00 f (MHz) 100.00 Fig. 8 Impedance ESR vs. frequency characteristics for multilayer chip capacitors Size 1206 10 F / 16 V Solid lines: Impedance / Dotted lines: ESR YNM0027 100.00 Z () 10.00 1.00 0.10 0.01 0.00 0.01 0.10 1.00 10.00 f (MHz) 100.00 Fig. 9 Impedance ESR vs. frequency characteristics for multilayer chip capacitors www.yageo.com Oct 27, 2009 V.3 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X5R 6.3 V to 50 V 13 18 Size 1210 10 F / 25 V Solid lines: Impedance / Dotted lines: ESR YNM0028 100.00 Z () 10.00 1.00 0.10 0.01 0.00 0.01 0.10 1.00 10.00 f (MHz) 100.00 Fig. 10 Impedance ESR vs. frequency characteristics for multilayer chip capacitors SOLDERING RECOMMENDATION Table 7 SOLDERING METHOD SIZE 0402 0603 0805 1206 1210 Reflow 0.1 F 1.0 F 2.2 F 4.7 F Reflow only Reflow/Wave < 0.1 F < 1.0 F < 2.2 F < 4.7 F --- www.yageo.com Oct 27, 2009 V.3 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X5R 6.3 V to 50 V 14 18 TESTS AND REQUIREMENTS Table 8 Test procedures and requirements TEST TEST METHOD PROCEDURE REQUIREMENTS Mounting IEC 6038421/22 4.3 The capacitors may be mounted on printed-circuit boards or ceramic substrates No visible damage Visual inspection and dimension check 4.4 Any applicable method using x 10 magnification In accordance with specification Capacitance 4.5.1 Class 2: f = 1 KHz for C 10 F, measuring at voltage 1 Vrms at 20 C Within specified tolerance f = 120 Hz for C >10 F, measuring at voltage 0.5 Vrms at 20 C Dissipation factor (D.F.) 4.5.2 Class 2: f = 1 KHz for C 10 F, measuring at voltage 1 Vrms at 20 C In accordance with specification f = 120 Hz for C > 10 F, measuring at voltage 0.5 Vrms at 20 C Insulation resistance 4.5.3 At Ur (DC) for 1 minute In accordance with specification Temperature characteristic 4.6 Class 2: Between minimum and maximum temperature X5R: -55 C to +85 C Normal Temperature: 20 C C/C Class 2: X5R: 15% C/C Class 2: X5R: 15% Adhesion 4.7 A force applied for 10 seconds to the line joining the terminations and in a plane parallel to the substrate Force size 0603: 5N size = 0402: 2.5N size = 0201: 1N www.yageo.com Oct 27, 2009 V.3 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X5R TEST TEST METHOD PROCEDURE REQUIREMENTS Bond strength of plating on end face IEC 6038421/22 Mounting in accordance with IEC 60384-22 paragraph 4.3 No visible damage Conditions: bending 1 mm at a rate of 1 mm/s, radius jig 340 mm 4.8 6.3 V to 50 V 15 18 C/C Class2: X5R: 10% C/C Class2: X5R: 10% Resistance to soldering heat 4.9 Precondition: 150 +0/-10 C for 1 hour, then keep for 24 1 hours at room temperature Preheating: for size 1206: 120 C to 150 C for 1 minute Preheating: for size >1206: 100 C to 120 C for 1 minute and 170 C to 200 C for 1 minute Solder bath temperature: 260 5 C Dipping time: 10 0.5 seconds Recovery time: 24 2 hours Dissolution of the end face plating shall not exceed 25% of the length of the edge concerned C/C Class2: X5R: 10% C/C Class2: X5R: 10% D.F. within initial specified value Rins within initial specified value Solderability 4.10 Preheated the temperature of 80 C to 140 C and maintained for 30 seconds to 60 seconds. The solder should cover over 95% of the critical area of each termination Test conditions for lead containing solder alloy Temperature: 235 5 C Dipping time: 2 0.2 seconds Depth of immersion: 10 mm Alloy Composition: 60/40 Sn/Pb Number of immersions: 1 Test conditions for leadfree containing solder alloy Temperature: 245 5 C Dipping time: 3 0.3 seconds Depth of immersion: 10 mm Alloy Composition: SAC305 Number of immersions: 1 www.yageo.com Oct 27, 2009 V.3 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. TEST TEST METHOD PROCEDURE REQUIREMENTS Rapid change of temperature IEC 6038421/22 Preconditioning; 150 +0/-10 C for 1 hour, then keep for 24 1 hours at room temperature No visual damage 4.11 X5R 6.3 V to 50 V 16 18 C/C 5 cycles with following detail: 30 minutes at lower category temperature 30 minutes at upper category temperature Class2: X5R: 15% Recovery time 24 2 hours C/C Class2: X5R: 15% D.F. meet initial specified value Rins meet initial specified value Damp heat with Ur load 4.13 1. Preconditioning, class 2 only: 150 +0/-10 C /1 hour, then keep for 24 1 hour at room temp 2. Initial measure: Spec: refer initial spec C, D, IR 3. Damp heat test: 500 12 hours at 40 2 C; 90 to 95% R.H. 1.0 Ur applied 4. Recovery: Class 2: 24 2 hours 5. Final measure: C, D, IR P.S. If the capacitance value is less than the minimum value permitted, then after the other measurements have been made the capacitor shall be precondition according to "IEC 60384 4.1" and then the requirement shall be met. No visual damage after recovery C/C Class2: X5R: 15% D.F. Class2: X5R: 16V: 7% 25V: 5% Rins Class2: X5R: 500 M or Rins x Cr 25s whichever is less C/C Class2: X5R: 20% D.F. Class2: X5R: 2 x initial value max Rins Class2: X5R: 500 M or Rins x Cr 25s whichever is less www.yageo.com Oct 27, 2009 V.3 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X5R TEST TEST METHOD PROCEDURE REQUIREMENTS Endurance IEC 6038421/22 1. Preconditioning, class 2 only: No visual damage 4.14 150 +0/-10 C /1 hour, then keep for 24 1 hour at room temp 2. Initial measure: Spec: refer initial spec C, D, IR 3. Endurance test: Temperature: X5R: 85 C Specified stress voltage applied for 1,000 hours: Applied 2.0 x Ur for general product. Applied 1.5 x Ur for high cap. product. 4. Recovery time: 24 2 hours 5. Final measure: C, D, IR P.S. If the capacitance value is less than the minimum value permitted, then after the other measurements have been made the capacitor shall be precondition according to "IEC 60384 4.1" and then the requirement shall be met. 6.3 V to 50 V 17 18 C/C Class2: X5R: 15% D.F. Class2: X5R: 16V: 7% 25V: 5% Rins Class2: X5R: 1,000 M or Rins x Cr 50s whichever is less C/C Class 2: X5R: 20% D.F. Class 2: X5R: 2 x initial value max Rins Class 2: X5R: 1,000 M or Rins x Cr 50s whichever is less Voltage proof IEC 60384-1 4.6 Specified stress voltage applied for 1 minute Ur 100 V: series applied 2.5 Ur 100 V < Ur 200 V series applied (1.5 Ur + 100) 200 V < Ur 500 V series applied (1.3 Ur + 100) Ur > 500 V: 1.3 Ur I: 7.5 mA No breakdown or flashover www.yageo.com Oct 27, 2009 V.3 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X5R 6.3 V to 50 V 18 18 REVISION HISTORY REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 3 Oct 27, 2009 - - Dimension updated Version 2 Jun 09, 2009 - - Ordering code updated Version 1 May 15, 2009 - - Product range updated Version 0 Apr 15, 2009 - - New datasheet for general purpose and high capacitance X5R series with RoHS compliant - Replace the "6.3V to 50V" part of pdf files: UP-X5R_X7R_HighCaps_6.3to-25V_11, UY-X5R_X7R_HighCaps_6.3-to-25V_11 - Combine 0201 from pdf files: UP-NP0X5RX7RY5V_0201_6.3-to-50V_2 and UY-NPOX5RX7RY5V_0201_6.3-to-50V_2 - Define global part number - Description of "Halogen Free compliant" added - Test method and procedure updated www.yageo.com Oct 27, 2009 V.3