www.magnecraft.com Thermal Pad/Class 6 Solid State Relay 847-441-2540 SSR-TP-1 Characteristics Description Function Packaging minimum Thermal Pad for Class 6 Relay Eliminates the need for Thermal Grease 10 pieces Used With these Solid State Relays Up to 50 Amps SECTION 3 One of the major considerations when using a SSR is properly managing the heat that is generated when switching currents higher than about 5 amps. In this scenario one must mount the base plate of the SSR onto a good heat conductor, typically aluminum; along with utilizing a good thermal transfer medium such as thermal grease or heat transfer pad. Magnecraft's thermal pad eliminates the need for messy thermal grease and simplifies installation with a simple peel-and-stick solution. 6 Series (Sec. 4, p.18-27) INSTALLATION: 1. RELEASE LINER ON ONE SIDE OF THE THERMAL PAD, PLACE UNDERNEATH CLASS 6 SOLID STATE RELAY. 2.22 (56.3) 2. RELEASE LINER ON OTHER SIDE OF THERMAL PAD AND PLACE RELAY AND PAD ONTO HEAT SINK OR PANEL. 0.88 (22.45) 1.72 (43.63) 0.29 (7.35) Magnecraft Solution Guide 1 05A 3/21 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Schneider Electric: SSR-TP-1