Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Model
RFP
-
1
50
-
10
C
G
N
-
S
Features:
• 150 Watts
• DC – 2.0 GHz
• Beryllium oxide Ceramic
• Welded Silver Leads
• Non-Nichrome Resistive
Element
• 100% Tested
• RoHS Compliant
Flangeless Resistor
150 Watts, 100
Ω
ΩΩ
Ω
General Specifications
Resistive Element Thick film
Substrate Beryllium oxide ceramic
Cover Alumina ceramic
Mounting Flange Copper, nickel plated per QQ-N-290
Lead(s) 99.9% pure silver (.005” thick)
Operating Temperature -55 to +150°C (see de rating chart)
Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value: 100 Ohms, ± 5%
Power: 150 Watts
Frequency Range: DC – 2.0 GHz
Capacitance 3.5 pF
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
Outline Drawing
Dimensions inches
150-100RCGN-S (097) Rev B
RoHS
Compliant
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Available on Tape and
Reel For Pick and Place
Manufacturing.
Model
RFP
-
1
50
-
10
C
G
N
-
S
Typical Performance:
Mounting Footprint and Procedure: Derating:
SUGGESTED MOUNTING PROCEDURES:
1. MAKE SURE THAT THE DEVICES ARE MOUNTED ON
FLAT SURFACES (.001" UNDER THE DEVICE) TO
OPTIMIZE THE HEAT TRANSFER.
2.
3. SOLDER LEADS IN PLACE USING SN96 TYPE SOLDER WITH
A CONTROLLED TEMPERATURE IRON. KEEP LEAD
LENGTH AS SHORT AS POSSIBLE USING A SUGGESTED
POSITION DEVICE ON MOUNTING SURFACE AND SOLDER
IN PLACE USING AN APPROPRIATE SOLDER TYPE OR A SN96 TYPE
STRESS RELIEF METHOD.
SOLDER.
NOT RECOMMENDED APPLICATION
BOARD LOWER
THAN LEAD. THAN LEAD.
BOARD HIGHER
SCALE: NONESCALE: NONE
BOARD EVEN
WITH LEAD.THAN LEAD.
BOARD LOWER
SUGGESTED STRESS RELIEF METHODS
(2 PLACES)
.025
150-100RCGN-S (097) Rev B
RoHS
Compliant