TLP627-2 DARLINGTON OPTOCOUPLERS ISOCOM PACKAGES LTD CIRCUIT 7.62 6.50 8 7 6 5 1 2 3 4 9.68 3.50 0.4 3.00 Units: mm Tolerance: 0.1 0.26 (R) 13.00 1.20 2.70 0.5 2.54 DESCRIPTION These devices are dual channel optocouplers. Each channel is composed of a Gallium Arsenide infra-red emitting diode and a darlington phototransistor. Package styles for these devices are 8 pin dil with surface mount, butt cut and gull wing options available. The same electrical die, assembly processes and materials are used for each channel of each device shown below. Therefore absolute maximum ratings, recommended operating conditions, electrical specifications and performance characteristics are identical for all units. Any exceptions, due to packaging variations and limitations, are as noted. Isocom Ltd supplies a multitude of plastic optocouplers for all applications varying from standard transistor optos through to Darlington and Schmitt Trigger devices. It's massive family of optos vary in speed allowing maximum opportunity to engineers worldwide. All devices are performance guaranteed between 20C and +80C and have completed rigorous testing. The Company's customers can be assured of our commitment to stringent quality, reliability and inspection standards, as demonstrated by our existing approvals. Other customer specific options can also be offered. FEATURES Manufactured and tested in BS9000 and CECC20000 approved premises High current transfer ratio 5000V electrical isolation Isocom Ltd reserves the right to change the details on this specification without notice. Please consult Isocom Ltd prior to use. Isocom Ltd cannot accept liability for any errors or omissions. For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, Hutton Close, Crowther Industrial Estate, District 3, Washington, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 Email Isocom@isocomoptocouplers.com Or go to the Isocom Website @: Http://www.isocom.uk.com ABSOLUTE MAXIMUM RATINGS Storage Temperature Operating Temperature Lead Soldering Temperature Input-to-Output Isolation Voltage -55C to +100C -55C to +125C 260C 1.6mm from case for 10S x5000VDC Input Diode Forward DC Current Reverse DC Voltage Peak forward Current Power Dissipation 50mA 5V 1.0A 70mW 10S duration Derate linearly above 100C at 1.6W/C. Output Transistor Collector-Emitter Voltage Emitter-Collector Voltage Collector Current Power Dissipation 50V 0.3V 150mA 100mW VCEO VECO ELECTRICAL CHARACTERISTICS TA = 25C U.O.S. (each channel where appropriate). Input Diode Electrical Characteristics Parameter Symbol Test Conditions Forward Voltage VF IF = 10mA Reverse Current IR VR = 5V Capacitance CT V = 0, f = 1MHz Output Detector Electrical Characteristics Collector-Emitter BVCEO IC = 0.1mA Breakdown Voltage Emitter-Collector BVECO IE = 0.1mA Breakdown Voltage Collector Dark Current ICEO VCE = 200V, IF = 0 Coupled Electrical Characteristics DC Current Transfer Ratio IF = 1mA, VCE = 1V IC/IF Saturated CTR IF = 10mA, VCE = 1V, IC/IF(sat) Collector-Emitter VCE IF = 1mA, IC = 10mA Saturation Voltage (Sat) Input to Output Capacitance CS VS = 0, f = 1mhz Input to Output Resistance RIO VIO = 500V Isolation Voltage VIO Isolating Voltage 1 minute Rise Time tr RL = 100,Ic = 10mA,Vcc=10V Fall Time tf Turn -on Time ton Turn-off Time toff Turn -on Time ton RL = 180,Ic = 16mA,Vcc=10V Strange Time tS Tuen-off Time tOFF Device Min Typ 1.2 Max 1.4 10 30 Units V A pF 300 V 0.3 V 10 1000 500 200 4000 nA % 1 0.8 10 -5*10 5000 40 15 50 15 5 40 80 Isocom Ltd reserves the right to change the details on this specification without notice. Please consult Isocom Ltd prior to use. Isocom Ltd cannot accept liability for any errors or omissions. For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, Hutton Close, Crowther Industrial Estate, District 3, Washington, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 Email Isocom@isocomoptocouplers.com Or go to the Isocom Website @: Http://www.isocom.uk.com V pF VDC S S S S S S S