TABLE of CONTENTS
WIRE-WOUND
RF CHIP INDUCTORS
Part Number Legend & Design Kits Available . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Performance Specifications
Environmental Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Mechanical Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5
Tape and Reel Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Miniature Wire-wound RF Chip Inductors
0402CD Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-7
0603CD Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9
0805CD Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-11
0805CM Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-13
0805FT Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14-15
1008CD Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-17
1008CM Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-19
1008CQ Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20-21
1206CD Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22-23
Application Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-27
The 0402 to 1206 series range of Miniature Chip Inductors contains the very latest in wire-wound
technology and Ceramic or Ferrite Core, thus providing the ultimate in performance demanded by
today's Wireless products. The Inductors provide high Q and SRFs in an industry standard size
and footprint. Pulse chip inductors manufactured after February, 2005 are in compliance with
RoHS requirements.
USA 858 674 8100 ••Germany 49 7032 7806 0 ••GSingapore 65 6287 8998 ••GShanghai 86 21 62787060 ••China 86 755 33966678 ••Taiwan 886 3 4356768
www.pulseeng.com 1WC701.L (4/10)
WIRE-WOUND
RF CHIP INDUCTORS
Part Number Legend
Design Kits Available from Pulse
Product KIT Series Kit Part Number Tolerance
0402CD Series PE-0402CDKIT-T 2%
0603CD Series PE-0603CDKIT-T 2%
0805CD Series PE-0805CDKIT-T 2%
1008CD Series PE-1008CDKIT-T 2%
NOTE: 0805CM, 1008CM and 1008CQ design kits are not available at this time.
INDUCTANCE (nH)
Representative of the
inductance value
TOLERANCE
F=±1%
G=±2%
J=±5%
TERMINATION (Lead Free Compatible)
T = Gold or Tin plating (Gold plating is priority)
G = Gold plating only
S = Tin plating only
CORE MATERIAL
C= Ceramic (Alumina)
CD = Standard range
CM = Alternative performance/inductance to CD
(0402, 0603, 0805, 1008, or 1206)
CQ = High Q
F= Ferrite
K= ± 10%
B= ± 0.2nH
S= ± 0.3nH
PACKAGING (T = Tape & Reel: 7 or 13 reel)
0402 0603 0805 1008 1206
3000 2000 2000 1600 3000
Size
Pcs/Reel
USA 858 674 8100 ••Germany 49 7032 7806 0 ••Singapore 65 6287 8998 ••GShanghai 86 21 62787060 ••China 86 755 33966678 ••Taiwan 886 3 4356768
www.pulseeng.com 2WC701.L (4/10)
WIRE-WOUND
RF CHIP INDUCTORS
Selection Guides
Electrical Specifications
Part Inductance
Number Size Construction (nH)
0402CD 0402 Wirewound 1.0 to 120
0603CD 0603 Wirewound 1.6 to 390
0805CD 0805 Wirewound 2.8 to 1500
0805CM 0805 Wirewound 3.3 to 820
0805FT 0805 Wirewound 1000 to 68000
1008CD 1008 Wirewound 9.7 to 8200
1008CM 1008 Wirewound 10 to 4700
1008CQ 1008 Wirewound 4.1 to 390
1206CD 1206 Wirewound 3.3 to 1200
Competition Cross Reference
Pulse Wire-wound Inductors
Type Competition 0402CD 0603CD 0805CD 0805FT 1008CQ 1008CD 1206CD
Coilcraft 0402CS 0603CS 0805CS/ 1008HQ 1008CS/ 1206CS
HS/HT HT/CT
Wire Murata LQW1608A LQN21A
Wound
Taiyo LB2012T LEM_2520T
Yuden
TDK NL2016 NLH2520
1 10 100 1 10 100 1000
CD Series: Standard 100% compatible with other market leaders.
CM Series: Offers improved electrical performance or alternative inductance values to Pulse CD series.
CQ Series: Offers high Q and high Idc series.
FT Series: Ferrite core offers higher inductance values.
USA 858 674 8100 ••Germany 49 7032 7806 0 ••Singapore 65 6287 8998 ••Shanghai 86 21 62787060 ••China 86 755 33966678 ••Taiwan 886 3 4356768
www.pulseeng.com 3WC701.L (4/10)
Storage and Operating
Temperature Range:
-40 to +125°C
Thermal Shock:
-40 to +85°C
Moisture Resistance
Operating Life
Inductors are subjected to the
extremes for 48 hours.
Then tested at 25°C
Inductors are subjected to 30 cycles
for 30 minutes at each extreme.
Then tested at 25°C
Inductors are subjected to
10 cycles of 24 hours at 70°C with
90 to 95% Relative Humidity
Then tested at 25°C
Inductors are subjected to
1000 hours at 85°C with 85%
Relative Humidity with
the rated current applied
There shall be no deformation
or change in appearance
Inductance shall not change
by more than ±5%
Q values shall not change
by more than ±10%
There shall be no Damaged,
Open or Shorted Windings
WIRE-WOUND
RF CHIP INDUCTORS
Performance Specifications
Environmental Testing
Temperature Range:
Recommended Solder
Heat Resistance Profile
Inductors are subjected to the
following: Use a solder pot at
260°C, with RMA Flux. Each
termination is immersed in
63Sn/37Pb molten solder
for 4 to 6 seconds.
There shall be no deformation
or change in appearance
Inductance shall not change
by more than ±5%
Q values shall not change
by more than ±10%
Mechanical Testing
T
E
M
P
E
R
A
T
U
R
E
C°
300
275
250
225
200
175
150
125
100
75
50
25
0
0 25 50 75 100 125 150 175 200 225 250 275 300
TIME (SECOND)
USA 858 674 8100 ••Germany 49 7032 7806 0 ••Singapore 65 6287 8998 ••Shanghai 86 21 62787060 ••China 86 755 33966678 ••Taiwan 886 3 4356768
www.pulseeng.com 4WC701.L (4/10)
WIRE-WOUND
RF CHIP INDUCTORS
Performance Specifications
Samplers are subjected to random
vibration as per NAVMAT P9492
Inductors are subjected to one half
sine wave pulse (8700 g's for
0.3 ms) in each directional axis
for a total of 18 shocks
Reflow Inductors on to test pads
using 63 Sn/37 Pb solder paste
(IR Reflow profile = 200°C for
30 seconds or peak 235°C for 20
seconds)
Mechanical Testing
Tape and Reel Specifications
A
C
B
D
E
P1P2P3
W
H
T
Packaging Specifications
Series Parts per Reel Dimensions (mm) Tape Dimensions (mm)
Reel A B C D E W P1 P2 P3 H T
0402CD 3000 178 50 13 14.4 8.4 8 2 4 4 1.1 0.3
0603CD 2000 178 50 13 14.4 8.4 8 2 4 4 1.7 0.3
0805CD 2000 178 50 13 14.4 8.4 8 2 4 4 2.1 0.3
0805CM 2000 178 50 13 14.4 8.4 8 2 4 4 2.1 0.3
0805FT 2000 178 50 13 14.4 8.4 8 2 4 4 2.1 0.3
1008CD 1600 178 50 13 14.4 8.4 8 2 4 4 2.6 0.3
1008CM 1600 178 50 13 14.4 8.4 8 2 4 4 2.6 0.3
1008CQ 1600 178 50 13 14.4 8.4 8 2 4 4 2.6 0.3
1206CD 3000 330 101 13 18.4 12.4 12 2 4 4 2.0 0.4
NOTE: P1, P2 and P3 are same for all chip inductor series. Keeping the same dimensions for guide hole and pocket pitch (P1), pocket pitch (P2), guide
hole pitch (P3) and tape width (8mm) for all series, enables the packaging machine to maintain the same settings while changing models. The only differ-
ence between the series are the parts per reel which contribute to a different length of tapes/reel per model.
Vibration (Random)
Mechanical Shock
Moisture Resistance
There shall be no deformation
or change in appearance
Inductance shall not change
by more than ±5%
Q values shall not change
by more than ±10%
The inductors shall withstand
a minimum force of 1000 g's in any
direction using a dynamometer
force guage.
USA 858 674 8100 ••Germany 49 7032 7806 0 ••Singapore 65 6287 8998 ••Shanghai 86 21 62787060 ••China 86 755 33966678 ••Taiwan 886 3 4356768
www.pulseeng.com 5WC701.L (4/10)
WIRE-WOUND RF CHIP
INDUCTORS - 0402CD SERIES
Wirewound ceramic core construction
High Q values
High self resonant frequency
Industry standard 0402 (1005 ) surface
mount land pattern
See page 3 for Competition Cross Reference
Electrical Specifications @ 25°C
Inductance 1 Standard Optional Q 2 SRF 3 RDC IDC
Part Number (nH) Tolerance Tolerance (MIN) (MHz MIN) (ΩMAX) (mA MAX)
PE-0402CD1N0KTT 1.0 @ 250MHz ±0.3nH (S) ±0.2nH (B) 13 @ 250MHz 6000 0.045 1360
PE-0402CD1N2KTT 1.2 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 13 @ 250MHz 6000 0.060 1300
PE-0402CD1N8KTT 1.8 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 16 @ 250MHz 6000 0.070 1040
PE-0402CD1N9KTT 1.9 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 16 @ 250MHz 6000 0.070 1040
PE-0402CD2N0KTT 2.0 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 16 @ 250MHz 6000 0.070 1040
PE-0402CD2N2KTT 2.2 @ 250 MHz ±10% (K) ±5% (J), ±2% (G) 18 @ 250MHz 6000 0.070 960
PE-0402CD2N4KTT 2.4 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 18 @ 250MHz 6000 0.068 900
PE-0402CD2N7KTT 2.7 @ 250MHz ±10% (K) ±5% (J) 18 @ 250MHz 6000 0.120 860
PE-0402CD3N3KTT 3.3 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 20 @ 250MHz 6000 0.066 840
PE-0402CD3N6KTT 3.6 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 20 @ 250MHz 6000 0.066 840
PE-0402CD3N9KTT 3.9 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 20 @ 250MHz 5800 0.066 840
PE-0402CD4N3KTT 4.3 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 20 @ 250MHz 5800 0.091 640
PE-0402CD4N7KTT 4.7 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 20 @ 250MHz 4775 0.130 640
PE-0402CD5N1KTT 5.1 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 23 @ 250MHz 5800 0.083 800
PE-0402CD5N6KTT 5.6 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 23 @ 250MHz 5800 0.083 760
PE-0402CD6N2KTT 6.2 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 23 @ 250MHz 5800 0.083 760
PE-0402CD6N8KTT 6.8 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 20 @ 250MHz 5800 0.083 680
PE-0402CD7N5KTT 7.5 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 25 @ 250MHz 5800 0.104 680
PE-0402CD8N2KTT 8.2 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 25 @ 250MHz 4400 0.104 680
PE-0402CD8N7KTT 8.7 @ 250MHz ±10% (K) ±5% (J) 21 @ 250MHz 4100 0.200 680
PE-0402CD9N0KTT 9.0 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 25 @ 250MHz 4160 0.104 680
PE-0402CD9N5KTT 9.5 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 21 @ 250MHz 4000 0.200 600
PE-0402CD100KTT 10 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 21 @ 250MHz 3900 0.195 480
PE-0402CD110KTT 11 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 26 @ 250MHz 3680 0.120 640
PE-0402CD120KTT 12 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 26 @ 250MHz 3600 0.120 640
PE-0402CD130KTT 13 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 26 @ 250MHz 3450 0.210 600
PE-0402CD150KTT 15 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 26 @ 250MHz 3280 0.172 560
PE-0402CD160KTT 16 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 26 @ 250MHz 3100 0.220 560
PE-0402CD180KTT 18 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 26 @ 250MHz 3100 0.230 520
PE-0402CD190KTT 19 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 26 @ 250MHz 3040 0.202 480
PE-0402CD200KTT 20 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 26 @ 250MHz 3000 0.250 480
PE-0402CD220KTT 22 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 26 @ 250MHz 2800 0.300 400
PE-0402CD230KTT 23 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 26 @ 250MHz 2720 0.214 400
PE-0402CD240KTT 24 @ 250MHz ±10% (K) ±5% (J) 26 @ 250MHz 2700 0.300 400
PE-0402CD270KTT 27 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 26 @ 250MHz 2480 0.298 400
(Continued on next page)
USA 858 674 8100 ••Germany 49 7032 7806 0 ••Singapore 65 6287 8998 ••Shanghai 86 21 62787060 ••China 86 755 33966678 ••Taiwan 886 3 4356768
www.pulseeng.com 6WC701.L (4/10)
WIRE-WOUND RF CHIP
INDUCTORS - 0402CD SERIES
.018
0,46
.026
0,66
.014
0,36
SUGGESTED
PAD LAYOUT
.047MAX
1,19
.026 MAX
0,66
2X .008 ± .004
0,20 ± 0,10
.005/0,13
.024 MAX
0,61
Epoxy Cap
Termination Pad
Pictorial view of core
(for reference only)
2X Side
Front and
Back
Mechanical
0
20
40
60
80
100
120
140
Frequency (MHz)
Q
10 100 1000 10000
5.6 nH
19 nH
1.0 nH
30
50
90
110
130
70
10
12 nH
27 nH
0
5
10
15
20
25
30
35
Frequency (MHz)
10 100 1000 10000
1 nH
5.6 nH
12 nH
19 nH
27 nH
Inductance (nH)
Typical Q vs Frequency Typical Inductance vs Frequency
Weight . . . . . . . 0.002 grams
Tape & Reel . . . . . .3000/reel
Dimensions: Inches
mm
Notes:
1. Inductance measured using a HP4286A RF Impedance Analyzer.
(Please note that inductance information is not stamped on part,
because of the extremely small size).
2. Q measured using a HP4291A RF Impedance Analyzer with a
HP16193A Test Fixture.
3. SRF measured using a HP8753C Network Analyzer.
4. RDC measured using a Valhalla Scientific model 4100 ATC
Digital Ohmmeter.
5. Based on a 15oC maximum temperature rise.
6. Sample Kit Part Number: PE-0402CDKIT-T
7. Component Weight: 0.002 grams typical.
Electrical Specifications @ 25°C (continued)
Inductance 1 Standard Optional Q 2 SRF 3 RDC IDC
Part Number (nH) Tolerance Tolerance (MIN) (MHz MIN) (ΩMAX) (mA MAX)
PE-0402CD300KTT 30 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 25 @ 250MHz 2350 0.300 350
PE-0402CD330KTT 33 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 24 @ 250MHz 2350 0.350 350
PE-0402CD360KTT 36 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 26 @ 250MHz 2320 0.403 320
PE-0402CD390KTT 39 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 25 @ 250MHz 2100 0.550 320
PE-0402CD400KTT 40 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 26 @ 250MHz 2240 0.438 320
PE-0402CD430KTT 43 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 25 @ 250MHz 2030 0.810 240
PE-0402CD470KTT 47 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 20 @ 250MHz 2100 0.830 100
PE-0402CD510KTT 51 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 25 @ 250MHz 1750 0.820 100
PE-0402CD560KTT 56 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 22 @ 250MHz 1750 0.970 100
PE-0402CD680KTT 68 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 18 @ 250MHz 1840 0.970 100
PE-0402CD820KTT 82 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 16 @ 250MHz 1680 1.250 100
PE-0402CD101KTT 100 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 16 @ 250MHz 1620 2.600 100
PE-0402CD121KTT 120 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 14 @ 250MHz 1520 2.700 90
USA 858 674 8100 ••Germany 49 7032 7806 0 ••Singapore 65 6287 8998 ••Shanghai 86 21 62787060 ••China 86 755 33966678 ••Taiwan 886 3 4356768
www.pulseeng.com 7WC701.L (4/10)
WIRE-WOUND RF CHIP
INDUCTORS - 0603CD SERIES
Electrical Specifications @ 25°C
Inductance 1Standard Optional Q 2SRF 3RDC 4IDC 5
Part Number (nH) Tolerance Tolerance (MIN) (MHz MIN) (ΩMAX) (mA MAX)
PE-0603CD1N6KTT 1.6 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 24 @ 250MHz >6000 0.030 700
PE-0603CD010KTT 1.7 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 16 @ 250MHz >6000 0.050 700
PE-0603CD1N8KTT 1.8 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 16 @ 250MHz >6000 0.045 700
PE-0603CD2N2KTT 2.2 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 18 @ 250MHz >6000 0.110 700
PE-0603CD3N3KTT 3.3 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 35 @ 250MHz >6000 0.045 700
PE-0603CD3N6KTT 3.6 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 20 @ 250MHz >6000 0.070 700
PE-0603CD030KTT 3.9 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 20 @ 250MHz >6000 0.080 700
PE-0603CD4N3KTT 4.3 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 20 @ 250MHz >6000 0.102 700
PE-0603CD040KTT 4.55 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 20 @ 250MHz 5800 0.106 700
PE-0603CD4N7KTT 4.7 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 20 @ 250MHz 5800 0.116 700
PE-0603CD5N1KTT 5.1 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 20 @ 250MHz 5700 0.108 700
PE-0603CD5N6KTT 5.6 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 25 @ 250MHz 5500 0.108 700
PE-0603CD6N2KTT 6.2 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 25 @ 250MHz 5800 0.110 700
PE-0603CD060KTT 6.68 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 25 @ 250MHz 5800 0.110 700
PE-0603CD6N8KTT 6.8 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 27 @ 250MHz 5800 0.110 700
PE-0603CD7N5KTT 7.5 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 28 @ 250MHz 4800 0.115 700
PE-0603CD080KTT 8.2 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 30 @ 250MHz 4600 0.120 700
PE-0603CD8N7KTT 8.7 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 28 @ 250MHz 4600 0.109 700
PE-0603CD9N5KTT 9.5 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 28 @ 250MHz 5400 0.135 700
PE-0603CD100KTT 10 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 30 @ 250MHz 4800 0.130 700
PE-0603CD110KTT 11 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 30 @ 250MHz 4000 0.086 700
PE-0603CD120KTT 12 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 30 @ 250MHz 4000 0.130 700
PE-0603CD130KTT 13 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 38 @ 250MHz 3600 0.106 700
PE-0603CD150KTT 15 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 30 @ 250MHz 4000 0.170 700
PE-0603CD160KTT 16 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 35 @ 250MHz 3300 0.170 700
PE-0603CD180KTT 18 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 35 @ 250MHz 3100 0.170 700
PE-0603CD220KTT 22 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 35 @ 250MHz 3000 0.190 700
PE-0603CD230KTT 23 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 38 @ 250MHz 2850 0.190 700
PE-0603CD240KTT 24 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 35 @ 250MHz 2650 0.200 600
PE-0603CD270KTT 27 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 35 @ 250MHz 2800 0.220 600
PE-0603CD300KTT 30 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 37 @ 250MHz 2250 0.144 600
PE-0603CD330KTT 33 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 35 @ 250MHz 2300 0.220 600
PE-0603CD360KTT 36 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 37 @ 250MHz 2080 0.250 600
PE-0603CD390KTT 39 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 35 @ 250MHz 2200 0.250 600
PE-0603CD430KTT 43 @ 250MHz
±
10% (K)
±
5% (J),
±
2% (G) 35 @ 250MHz 2000 0.280 600
PE-0603CD470KTT 47 @ 200MHz
±
10% (K)
±
5% (J),
±
2% (G) 35 @ 200MHz 2000 0.280 600
PE-0603CD510KTT 51 @ 200MHz
±
10% (K)
±
5% (J),
±
2% (G) 35 @ 200MHz 1900 0.270 600
PE-0603CD560KTT 56 @ 200MHz
±
10% (K)
±
5% (J),
±
2% (G) 35 @ 200MHz 1900 0.310 600
PE-0603CD680KTT 68 @ 200MHz
±
10% (K)
±
5% (J),
±
2% (G) 35 @ 200MHz 1700 0.340 600
PE-0603CD720KTT 72 @ 150MHz
±
10% (K)
±
5% (J),
±
2% (G) 34 @ 150MHz 1700 0.490 400
(Continued on next page)
Wirewound ceramic core construction
High Q values
High self resonant frequency
Industry standard 0603 (1608) surface mount
land pattern
See page 3 for Competition Cross Reference
USA 858 674 8100 ••Germany 49 7032 7806 0 ••Singapore 65 6287 8998 ••Shanghai 86 21 62787060 ••China 86 755 33966678 ••Taiwan 886 3 4356768
www.pulseeng.com 8WC701.L (4/10)
WIRE-WOUND RF CHIP
INDUCTORS - 0603CD SERIES
Notes:
1. Inductance measured using a HP4286A RF Impedance Analyzer.
2. Q measured using a HP4291A RF Impedance Analyzer with a
HP16193A Test Fixture.
3. SRF measured using a HP8753C Network Analyzer.
4. RDC measured using a Valhalla Scientific model 4100 ATC
Digital Ohmmeter.
5. Based on a 15oC maximum temperature rise.
6. Sample Kit Part Number: PE-0603CDKIT-T
7. 5-sides or top side epoxy cap.
Dimensions: Inches
mm
Unless otherwise specified
all tolerances are ± .010
0,25
2 X .025
0,64
.025
0,64
.050
1,27
SUGGESTED PAD LAYOUT
.049 MAX
1,24
.071 MAX
1,80
2X.014 ±.004
0,36 ±0,10
.040 MAX
1,02
.005/0,13
BOTTOM VIEW
Mechanical
0
20
40
60
80
100
120
Frequency (MHz)
Q
10 100 1000 10000
33 nH
68 nH
120 nH
22 nH
3.3 nH
12 nH
Frequency (MHz)
Inductance (nH)
10 100 1000 10000
3.3 nH
12 nH
33 nH
68 nH
0
50
100
150
200
120 nH
22 nH
25
75
125
175
Typical Q vs Frequency Typical Inductance vs Frequency
Electrical Specifications @ 25°C (continued)
Inductance 1Standard Optional Q 2SRF 3RDC 4IDC 5
Part Number (nH) Tolerance Tolerance (MIN) (MHz MIN) (ΩMAX) (mA MAX)
PE-0603CD820KTT 82 @ 150MHz
±
10% (K)
±
5% (J),
±
2% (G) 34 @ 150MHz 1700 0.540 400
PE-0603CD101KTT 98.50 @ 150MHz
±
10% (K)
±
5% (J),
±
2% (G) 34 @ 150MHz 1400 0.580 400
PE-0603CDR10KTT 100 @ 150MHz
±
10% (K)
±
5% (J),
±
2% (G) 34 @ 150MHz 1400 0.580 400
PE-0603CD111KTT 110 @ 150MHz
±
10% (K)
±
5% (J),
±
2% (G) 33 @ 150MHz 1300 0.610 300
PE-0603CDR12KTT 120 @ 150MHz
±
10% (K)
±
5% (J),
±
2% (G) 32 @ 150MHz 1300 0.650 300
PE-0603CD121KTT 122 @ 150MHz
±
10% (K)
±
5% (J),
±
2% (G) 33 @ 150MHz 1300 0.650 300
PE-0603CD151KTT 150 @ 150MHz
±
10% (K)
±
5% (J),
±
2% (G) 28 @ 150MHz 990 0.920 280
PE-0603CD181KTT 180 @ 100MHz
±
10% (K)
±
5% (J),
±
2% (G) 25 @ 100MHz 990 1.250 240
PE-0603CD201KTT 200 @ 100MHz
±
10% (K)
±
5% (J),
±
2% (G) 25 @ 100MHz 900 1.980 240
PE-0603CD211KTT 210 @ 100MHz
±
10% (K)
±
5% (J),
±
2% (G) 27 @ 100MHz 895 2.060 220
PE-0603CD221KTT 220 @ 100MHz
±
10% (K)
±
5% (J),
±
2% (G) 25 @ 100MHz 900 1.900 200
PE-0603CD251KTT 250 @ 100MHz
±
10% (K)
±
5% (J),
±
2% (G) 25 @ 100MHz 822 3.550 180
PE-0603CD271KTT 270 @ 100MHz
±
10% (K)
±
5% (J),
±
2% (G) 24 @ 100MHz 860 2.300 170
PE-0603CD331KTT 330 @ 100MHz
±
10% (K)
±
5% (J),
±
2% (G) 22 @ 100MHz 500 2.300 150
PE-0603CD391KTT 390 @ 100MHz
±
10% (K)
±
5% (J),
±
2% (G) 20 @ 100 MHz 350 2.900 130
USA 858 674 8100 ••Germany 49 7032 7806 0 ••Singapore 65 6287 8998 ••Shanghai 86 21 62787060 ••China 86 755 33966678 ••Taiwan 886 3 4356768
www.pulseeng.com 9WC701.L (4/10)
WIRE-WOUND RF CHIP
INDUCTORS - 0805CD SERIES
Electrical Specifications @ 25°C
Inductance 1Standard Optional Q 2SRF 3RDC 4IDC 5
Part Number (nH) Tolerance Tolerance (MIN) (MHz MIN) (ΩMAX) (mA MAX)
PE-0805CD2N8KTT 2.8 @ 250MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 80 @ 1500MHz >6000 0.06 600
PE-0805CD3N0KTT 3.0 @ 250MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 65 @ 1500MHz >6000 0.06 600
PE-0805CD030KTT 3.32 @ 250MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 40 @ 1500MHz 6000 0.08 600
PE-0805CD050KTT 5.6 @ 250MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 50 @ 1500MHz 5500 0.10 600
PE-0805CD060KTT 6.5 @ 250MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 50 @ 1000MHz 5000 0.11 600
PE-0805CD7N5KTT 7.5 @ 250MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 50 @ 1000MHz 4500 0.14 600
PE-0805CD080KTT 7.9 @ 250MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 50 @ 1000MHz 4700 0.12 600
PE-0805CD100KTT 10.2 @ 250MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 50 @ 500MHz 4100 0.14 600
PE-0805CD120KTT 11.9 @ 250MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 50 @ 500MHz 4000 0.15 600
PE-0805CD150KTT 14.9 @ 250MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 50 @ 500MHz 3400 0.17 600
PE-0805CD180KTT 17.95 @ 250MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 50 @ 500MHz 3300 0.20 600
PE-0805CD220KTT 21.7 @ 250MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 55 @ 500MHz 2600 0.22 500
PE-0805CD240KTT 24 @ 250MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 50 @ 500MHz 2000 0.22 500
PE-0805CD270KTT 26.5 @ 250MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 55 @ 500MHz 2500 0.25 500
PE-0805CD330KTT 32.75 @ 250MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 60 @ 500MHz 2050 0.27 500
PE-0805CD360KTT 36 @ 250MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 55 @ 500MHz 1700 0.27 500
PE-0805CD390KTT 38.5 @ 250MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 60 @ 500MHz 2000 0.29 500
PE-0805CD430KTT 43 @ 200MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 60 @ 500MHz 1650 0.34 500
PE-0805CD470KTT 46.6 @ 200MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 60 @ 500MHz 1650 0.31 500
PE-0805CD560KTT 55.5 @ 200MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 60 @ 500MHz 1550 0.34 500
PE-0805CD680KTT 67.8 @ 200MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 60 @ 500MHz 1450 0.38 500
PE-0805CD820KTT 82.7 @ 150MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 60 @ 500MHz 1300 0.42 400
PE-0805CD910KTT 91 @ 150MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 65 @ 500MHz 1200 0.44 400
PE-0805CD101KTT 98.7 @ 150MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 60 @ 500MHz 1200 0.46 400
PE-0805CD111KTT 110 @ 150MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 50 @ 250MHz 1000 0.48 400
PE-0805CD121KTT 119.7 @ 150MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 50 @ 250MHz 1100 0.51 400
PE-0805CD151KTT 149.4 @ 100MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 50 @ 250MHz 920 0.56 400
PE-0805CD181KTT 179.6 @ 100MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 50 @ 250MHz 870 0.64 400
PE-0805CD221KTT 217 @ 100MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 45 @ 250MHz 850 0.70 400
PE-0805CD241KTT 240 @ 100MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 44 @ 250MHz 690 1.00 350
PE-0805CD271KTT 269 @ 100MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 45 @ 250MHz 650 1.00 350
PE-0805CD331KTT 331 @ 100MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 45 @ 250MHz 600 1.40 310
PE-0805CD391KTT 386 @ 100MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 35 @ 250MHz 560 1.50 290
PE-0805CD471KTT 477 @ 50MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 33 @ 100MHz 375 1.76 250
PE-0805CD561KTT 545 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 23 @ 50MHz 340 1.90 230
PE-0805CD681KTT 674 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 23 @ 50MHz 188 2.20 190
PE-0805CD821KTT 783 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 23 @ 50MHz 215 2.35 180
PE-0805CD102KTT 1000 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 20 @ 50MHz 200 3.60 150
PE-0805CD122KTT 1200 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 20 @ 50MHz 200 4.10 120
PE-0805CD152KTT 1500 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 20 @ 50MHz 200 5.00 100
NOTES:
1. Inductance measured with HP4286A RF Impedance Analyzer.
2. Q measured using a HP4291A RF Impedance Analyzer with a
HP16193A Test Fixture.
3. SRF measured using a HP8753C Network Analyzer.
4. RDC measured using a Valhalla Scientific model 4100 ATC
Digital Ohmmeter.
5. Based on a 15oC maximum temperature rise.
6. Sample Kit Part Number: PE-0805CDKIT-T
***For other inductance values in 0805 size, please refer to 0805CM (page 12-13) and 0805FT (page 14-15).***
USA 858 674 8100 ••Germany 49 7032 7806 0 ••Singapore 65 6287 8998 ••Shanghai 86 21 62787060 ••China 86 755 33966678 ••Taiwan 886 3 4356768
www.pulseeng.com 10 WC701.L (4/10)
Wirewound ceramic core construction
High Q values and self resonant frequency
Industry standard 0805 (2012)
surface mount land pattern
See page 3 for Competition Cross Reference
WIRE-WOUND RF CHIP
INDUCTORS - 0805CD SERIES
0
20
40
60
80
100
120
140
Frequency (MHz)
Q
10 100 1000 10000
3.3 nH
6.8 nH
12 nH
22 nH
39 nH
68 nH
120 nH
270 nH
0
50
100
150
200
250
300
350
Frequency (MHz)
10 100 1000 10000
3.3 nH
15 nH
39 nH
220 nH
100 nH
Mechanical
Typical Q vs Frequency Typical Inductance vs Frequency
A
.090 MAX
2,29
.066 MAX
1,68
Front and
Back
2X Side 2X Inside
.080
2,03
Epoxy Cap
.062 MAX
1,58
.005/0,13
Termination Pad
.070
1,78
.040
1,02
.030
0,76
.040
1,02
SUGGESTED PAD LAYOUT
2X.020
0,51
Weight . . . . . . . 0.012 grams
Tape & Reel . . . . . .2000/reel
Dimensions: Inches
mm
Unless otherwise specified
all tolerances are ± .010
USA 858 674 8100 ••Germany 49 7032 7806 0 ••Singapore 65 6287 8998 ••Shanghai 86 21 62787060 ••China 86 755 33966678 ••Taiwan 886 3 4356768
www.pulseeng.com 11 WC701.L (4/10)
WIRE-WOUND RF CHIP
INDUCTORS - 0805CM SERIES
Electrical Specifications @ 25°C
Inductance 1Standard Optional Q 2SRF 3RDC 4IDC 5
Part Number (nH) Tolerance Tolerance (MIN) (MHz MIN) (ΩMAX) (mA MAX)
PE-0805CM030KTT 3.3 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 37 @ 1500MHz 5000 0.08 600
PE-0805CM060KTT 6.8 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 46 @ 1000MHz 5000 0.15 600
PE-0805CM080KTT 8.2 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 47 @ 1000MHz 3900 0.13 600
PE-0805CM100KTT 10 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 60 @ 500MHz 3900 0.10 600
PE-0805CM120KTT 12 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 50 @ 500MHz 2900 0.13 600
PE-0805CM150KTT 15 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 50 @ 500MHz 2700 0.15 600
PE-0805CM180KTT 18 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 50 @ 500MHz 2600 0.13 600
PE-0805CM220KTT 22 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 55 @ 500MHz 2200 0.13 500
PE-0805CM270KTT 27 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 55 @ 500MHz 2000 0.23 500
PE-0805CM330KTT 33 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 58 @ 500MHz 1800 0.18 500
PE-0805CM390KTT 39 @ 250MHz ±10% (K) ±5% (J), ±2% (G) 60 @ 500MHz 1600 0.23 500
PE-0805CM470KTT 47 @ 200MHz ±10% (K) ±5% (J), ±2% (G) 60 @ 500MHz 1650 0.25 500
PE-0805CM560KTT 56 @ 200MHz ±10% (K) ±5% (J), ±2% (G) 60 @ 500MHz 1300 0.16 500
PE-0805CM680KTT 68 @ 200MHz ±10% (K) ±5% (J), ±2% (G) 60 @ 500MHz 1350 0.18 500
PE-0805CM820KTT 82 @ 150MHz ±10% (K) ±5% (J), ±2% (G) 60 @ 500MHz 1300 0.36 400
PE-0805CM101KTT 100 @ 150MHz ±10% (K) ±5% (J), ±2% (G) 55 @ 500MHz 1100 0.36 400
PE-0805CM121KTT 120 @ 150MHz ±10% (K) ±5% (J), ±2% (G) 45 @ 250MHz 1100 0.56 350
PE-0805CM151KTT 150 @ 100MHz ±10% (K) ±5% (J), ±2% (G) 50 @ 250MHz 900 0.56 350
PE-0805CM181KTT 180 @ 100MHz ±10% (K) ±5% (J), ±2% (G) 50 @ 250MHz 875 0.69 300
PE-0805CM221KTT 220 @ 100MHz ±10% (K) ±5% (J), ±2% (G) 45 @ 250MHz 800 0.85 300
PE-0805CM271KTT 270 @ 100MHz ±10% (K) ±5% (J), ±2% (G) 40 @ 100MHz 800 0.90 300
PE-0805CM331KTT 330 @ 100MHz ±10% (K) ±5% (J), ±2% (G) 40 @ 100MHz 775 1.28 300
PE-0805CM391KTT 390 @ 100MHz ±10% (K) ±5% (J), ±2% (G) 40 @ 100MHz 725 1.70 300
PE-0805CM471KTT 470 @ 100MHz ±10% (K) ±5% (J), ±2% (G) 38 @ 100MHz 600 3.25 240
PE-0805CM561KTT 560 @ 100MHz ±10% (K) ±5% (J), ±2% (G) 40 @ 100MHz 600 3.10 240
PE-0805CM681KTT 680 @ 50MHz ±10% (K) ±5% (J), ±2% (G) 32 @ 50MHz 550 3.50 240
PE-0805CM821KTT 820 @ 50MHz ±10% (K) ±5% (J), ±2% (G) 23 @ 50MHz 215 2.35 200
NOTES:
1. Inductance measured using a HP4286A RF Impedance
Analyzer.
2. Q measured using a HP4291A RF Impedance Analyzer with
a HP16193A Test Fixture.
3. SRF measured using a HP8753C Network Analyzer.
4. RDC measured using a Valhalla Scientific model 4100 ATC
Digital Ohmmeter.
5. Based on a 15oC maximum temperature rise.
USA 858 674 8100 ••Germany 49 7032 7806 0 ••Singapore 65 6287 8998 ••Shanghai 86 21 62787060 ••China 86 755 33966678 ••Taiwan 886 3 4356768
www.pulseeng.com 12 WC701.L (4/10)
Wirewound ceramic core construction
High Q values and self resonant frequency
Industry standard 0805 (2012)
surface mount land pattern
See page 3 for Competition Cross Reference
WIRE-WOUND RF CHIP
INDUCTORS - 0805CM SERIES
Mechanical
0
20
40
60
80
100
120
140
Frequency (MHz)
Q
10 100 1000 10000
3.3 nH
6.8 nH
12 nH
22 nH
39 nH
68 nH
270 nH
120 nH
Inductance (nH)
0
50
100
150
200
250
300
350
Frequency (MHz)
10 100 1000 10000
3.3 nH
15 nH
39 nH
220 nH
100 nH
Typical Q vs Frequency Typical Inductance vs Frequency
Weight . . . . . . . 0.012 grams
Tape & Reel . . . . . .2000/reel
Dimensions: Inches
mm
Unless otherwise specified
all tolerances are ± .010
A
.090 MAX
2,29
.066 MAX
1,68
Front and
Back
2X Side 2X Inside
.080
2,03
Epoxy Cap
.062 MAX
1,58
.005/0,13
Termination Pad
.070
1,78
.040
1,02
.030
0,76
.040
1,02
SUGGESTED PAD LAYOUT
2X.020
0,51
USA 858 674 8100 ••Germany 49 7032 7806 0 ••Singapore 65 6287 8998 ••Shanghai 86 21 62787060 ••China 86 755 33966678 ••Taiwan 886 3 4356768
www.pulseeng.com 13 WC701.L (4/10)
WIRE-WOUND RF CHIP
INDUCTORS - 0805FT SERIES
Electrical Specifications @ 25°C
Inductance 1Standard Optional Q 2SRF 3RDC 4IDC 5
Part Number (µH) Tolerance Tolerance (MIN) (MHz MIN) (ΩMAX) (mA MAX)
PE-0805FT102KTT 1.0 @ 7.96MHz ±10% (K) ±5% (J) 15 @ 7.96MHz 63 1.20 245
PE-0805FT152KTT 1.5 @ 7.96MHz ±10% (K) ±5% (J) 15 @ 7.96MHz 60 1.45 225
PE-0805FT222KTT 2.2 @ 7.96MHz ±10% (K) ±5% (J) 15 @ 7.96MHz 58 1.80 200
PE-0805FT332KTT 3.3 @ 7.96MHz ±10% (K) ±5% (J) 15 @ 7.96MHz 50 2.30 175
PE-0805FT472KTT 4.7 @ 7.96MHz ±10% (K) ±5% (J) 15 @7.96MHz 43 2.80 140
PE-0805FT682KTT 6.8 @ 7.96MHz ±10% (K) ±5% (J) 15 @ 7.96MHz 36 3.40 115
PE-0805FT103KTT 10 @ 2.52MHz ±10% (K) ±5% (J) 10 @ 2.52MHz 30 4.70 98
PE-0805FT153KTT 15 @ 2.52MHz ±10% (K) ±5% (J) 10 @ 2.52MHz 23 6.50 80
PE-0805FT223KTT 22 @ 2.52MHz ±10% (K) ±5% (J) 10 @ 2.52MHz 20 8.00 68
PE-0805FT333KTT 33 @ 2.52MHz ±10% (K) ±5% (J) 10 @ 2.52MHz 17 10.70 60
PE-0805FT473KTT 47 @ 2.52MHz ±10% (K) ±5% (J) 10 @ 2.52MHz 14 13.80 55
PE-0805FT683KTT 68 @ 2.52MHz ±10% (K) ±5% (J) 8 @ 2.52MHz 11 17.50 49
NOTES:
1. Inductance measured using a HP4286A RF Impedance
Analyzer.
2. Q measured using a HP4291A RF Impedance Analyzer with
a HP16193A Test Fixture.
3. SRF measured using a HP8753C Network Analyzer.
4. RDC measured using a Valhalla Scientific model 4100 ATC
Digital Ohmmeter.
5. Based on a 15oC maximum temperature rise.
6. Sample Kit Part Number: PE-0805FTKIT-T
USA 858 674 8100 ••Germany 49 7032 7806 0 ••Singapore 65 6287 8998 ••Shanghai 86 21 62787060 ••China 86 755 33966678 ••Taiwan 886 3 4356768
www.pulseeng.com 14 WC701.L (4/10)
Wirewound ferrite core construction
High Q values and self resonant frequency
Industry standard 0805 (2012)
surface mount land pattern
See page 3 for Competition Cross Reference
WIRE-WOUND RF CHIP
INDUCTORS - 0805FT SERIES
Mechanical
Weight . . . . . . . 0.012 grams
Tape & Reel . . . . . .2000/reel
Dimensions: Inches
mm
Unless otherwise specified
all tolerances are ± .010
0
5
10
15
20
25
30
35
40
1000 10000 100000
INDUCTANCE(
µ
H)
33
µ
H
FREQUENCY(kHz)
22
µ
H
15
µ
H
10
µ
H
1.0
µ
H
6.8
µ
H
4.7
µ
H
3.3
µ
H
2.2
µ
H
1.5
µ
H
PE-0805FT102JTT PE-0805FT152JTT
PE-0805FT222JTT PE-0805FT332JTT
PE-0805FT472JTT PE-0805FT682JTT
PE-0805FT103JTT PE-0805FT153JTT
PE-0805FT223JTT PE-0805FT333JTT
0
5
10
15
20
25
1000 10000 100000
FREQUENCY(kHz)
Q
3.3
µ
H
1.5
µ
H
4.7
µ
H
10
µ
H
1.0
µ
H
33
µ
H
22
µ
H
15
µ
H
6.8
µ
H
2.2
µ
H
PE-0805FT102FTT PE-0805FT152JTT
PE-0805FT222JTT PE-0805FT332JTT
PE-0805FT472JTT PE-0805FT682JTT
PE-0805FT103JTT PE-0805FT153JTT
PE-0805FT223JTT PE-0805FT333JTT
Typical Q vs. Frequency Typical Inductance vs. Frequency
A
.090 MAX
2,29
.066 MAX
1,68
Front and
Back
2X Side 2X Inside
.080
2,03
Epoxy Cap
.062 MAX
1,58
.005/0,13
Termination Pad
.070
1,78
.040
1,02
.030
0,76
.040
1,02
SUGGESTED PAD LAYOUT
2X.020
0,51
USA 858 674 8100 ••Germany 49 7032 7806 0 ••Singapore 65 6287 8998 ••Shanghai 86 21 62787060 ••China 86 755 33966678 ••Taiwan 886 3 4356768
www.pulseeng.com 15 WC701.L (4/10)
WIRE-WOUND RF CHIP
INDUCTORS - 1008CD SERIES
Electrical Specifications @ 25°C
Inductance 1Standard Optional Q 2SRF 3RDC 4IDC 5
Part Number (nH) Tolerance Tolerance (MIN) (MHz MIN) (ΩMAX) (mA MAX)
PE-1008CD090KTT 9,7 @ 50MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 50 @ 500MHz 4100 0.09 1000
PE-1008CD100KTT 10 @ 50MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 50 @ 500MHz 4100 0.09 1000
PE-1008CD120KTT 12 @ 50MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 50 @ 500MHz 3300 0.09 1000
PE-1008CD140KTT 14,3 @ 50MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 50 @ 500MHz 1850 0.10 1000
PE-1008CD150KTT 15 @ 50MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 50 @ 500MHz 1850 0.10 1000
PE-1008CD180KTT 17,8 @ 50MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 50 @ 350MHz 2500 0.11 1000
PE-1008CD210KTT 20,9 @ 50MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 55 @ 350MHz 1800 0.12 1000
PE-1008CD220KTT 22 @ 50MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 55 @ 350MHz 1800 0.12 1000
PE-1008CD260KTT 26,2 @ 50MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 55 @ 350MHz 1500 0.13 1000
PE-1008CD270KTT 27 @ 50MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 55 @ 350MHz 1500 0.11 1000
PE-1008CD320KTT 31,8 @ 50MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 60 @ 350MHz 1600 0.16 1000
PE-1008CD330KTT 33 @ 50MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 60 @ 350MHz 1600 0.14 1000
PE-1008CD380KTT 38,2 @ 50MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 60 @ 350MHz 1400 0.15 1000
PE-1008CD390KTT 39 @ 50MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 60 @ 350MHz 1400 0.12 1000
PE-1008CD450KTT 44,9 @ 50MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 65 @ 350MHz 1200 0.16 1000
PE-1008CD470KTT 47 @ 50MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 65 @ 350MHz 1200 0.08 1000
PE-1008CD540KTT 54 @ 50MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 65 @ 350MHz 1150 0.18 1000
PE-1008CD560KTT 56 @ 50MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 65 @ 350MHz 1150 0.12 1000
PE-1008CD650KTT 65 @ 50MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 65 @ 350MHz 1100 0.20 1000
PE-1008CD680KTT 68 @ 50MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 65 @ 350MHz 1100 0.07 1000
PE-1008CD790KTT 79 @ 50MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 60 @ 350MHz 950 0.22 1000
PE-1008CD820KTT 82 @ 50MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 60 @ 350MHz 950 0.14 1000
PE-1008CD960KTT 96,1 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 60 @ 350MHz 900 0.56 650
PE-1008CD101KTT 100 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 60 @ 350MHz 900 0.15 650
PE-1008CD121KTT 120 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 60 @ 350MHz 950 0.63 650
PE-1008CD141KTT 145,7 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 45 @ 100MHz 625 0.70 580
PE-1008CD151KTT 150 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 45 @ 100MHz 625 0.16 580
PE-1008CD161KTT 160 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 45 @ 100MHz 625 0.77 600
PE-1008CD171KTT 170,2 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 45 @ 100MHz 650 0.77 620
PE-1008CD181KTT 180 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 45 @ 100MHz 650 0.77 620
PE-1008CD211KTT 216 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 45 @ 100MHz 625 0.84 500
PE-1008CD221KTT 220 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 45 @ 100MHz 625 0.84 500
PE-1008CD261KTT 260,5 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 45 @ 100MHz 525 0.91 500
PE-1008CD271KTT 270 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 45 @ 100MHz 525 0.91 500
PE-1008CD311KTT 313,6 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 45 @ 100MHz 500 1.05 450
PE-1008CD331KTT 330 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 45 @ 100MHz 500 1.05 450
PE-1008CD361KTT 365 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 45 @ 100MHz 500 1.12 470
PE-1008CD391KTT 390 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 45 @ 100MHz 475 1.12 470
PE-1008CD451KTT 447 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 45 @ 100MHz 450 1.19 420
PE-1008CD471KTT 470 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 45 @ 100MHz 450 1.19 420
PE-1008CD541KTT 535 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 45 @ 100MHz 415 1.33 310
PE-1008CD561KTT 560 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 45 @ 100MHz 415 1.33 310
PE-1008CD591KTT 586 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 45 @ 100MHz 375 1.40 300
PE-1008CD621KTT 620 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 45 @ 100MHz 375 1.40 300
PE-1008CD641KTT 636 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 45 @ 100MHz 375 1.47 230
PE-1008CD681KTT 680 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 45 @ 100MHz 375 1.47 230
PE-1008CD711KTT 708,8 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 45 @ 100MHz 360 1.54 200
PE-1008CD751KTT 750 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 45 @ 100MHz 350 1.61 200
PE-1008CD771KTT 768 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 45 @ 100MHz 325 1.61 180
PE-1008CD821KTT 820 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 45 @ 100MHz 325 1.61 180
PE-1008CD851KTT 849.8 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 35 @ 50MHz 320 1.68 150
USA 858 674 8100 ••Germany 49 7032 7806 0 ••Singapore 65 6287 8998 ••Shanghai 86 21 62787060 ••China 86 755 33966678 ••Taiwan 886 3 4356768
www.pulseeng.com 16 WC701.L (4/10)
Wirewound ceramic core construction
High Q values and high self-resonant frequency
Industry standard 1008 (2520)
SMT land pattern
See page 3 for Competition Cross Reference
WIRE-WOUND RF CHIP
INDUCTORS - 1008CD SERIES
Electrical Specifications @ 25°C (continued)
Inductance 1Standard Optional Q 2SRF 3RDC 4IDC 5
Part Number (nH) Tolerance Tolerance (MIN) (MHz MIN) (ΩMAX) (mA MAX)
Typical Q vs Frequency
0
10
20
30
Frequency (MHz)
Q
10 100 1000 10000
40
50
60
70
80
90
100
12 nH
47 nH
100 nH
330 nH
750 nH
1800 nH
0
Frequency (MHz)
10 100 1000 10000
Inductance (nH)
1000
100
200
300
400
500
600
700
800
900
12 nH
47 nH
330 nH
100 nH
750 nH
Typical Inductance vs Frequency
Mechanical
Front and
Back
2X Side 2X Inside
.100
2,54
.045
1,14
2 X .040
1,02
040
.115 MAX
2,92
.110 MAX
2,79
Epoxy Cap
.090 MAX
2,29
Termination Pad
SUGGESTED PAD LAYOUT
2X.020 ±.004
0,51 ±0,10
Dimensions: Inches
mm
Unless otherwise specified, all tolerances are ±.010
0,25
PE-1008CD911KTT 909,5 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 35 @ 50MHz 290 1.75 150
PE-1008CD102KTT 1000 @ 25MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 35 @ 50MHz 260 1.90 120
PE-1008CD112KTT 1184 @ 7.9MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 35 @ 50MHz 250 2.00 310
PE-1008CD122KTT 1200 @ 7.9MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 35 @ 50MHz 250 2.00 310
PE-1008CD142KTT 1470 @ 7.9MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 28 @ 50MHz 200 2.30 330
PE-1008CD152KTT 1500 @ 7.9MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 28 @ 50MHz 200 2.30 330
PE-1008CD182KTT 1792.9 @ 7.9MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 28 @ 50MHz 160 2.60 300
PE-1008CD212KTT 2154.5 @ 7.9MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 28 @ 50MHz 80 2.80 280
PE-1008CD222KTT 2200 @ 7.9MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 28 @ 50MHz 80 2.80 280
PE-1008CD262KTT 2646.8 @ 7.9MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 22 @ 25MHz 90 3.20 290
PE-1008CD272KTT 2700 @ 7.9MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 22 @ 25MHz 90 3.20 290
PE-1008CD322KTT 3207.6 @ 7.9MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 22 @ 25MHz 40 3.40 290
PE-1008CD332KTT 3300 @ 7.9MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 22 @ 25MHz 40 3.40 290
PE-1008CD372KTT 3758.2 @ 7.9MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 20 @ 25MHz 35 3.60 260
PE-1008CD392KTT 3900 @ 7.9MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 20 @ 25MHz 35 3.60 260
PE-1008CD452KTT 4526.2 @ 7.9MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 20 @ 25MHz 25 4.00 260
PE-1008CD472KTT 4700 @ 7.9MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 20 @ 25MHz 25 4.00 260
PE-1008CD562KTT 5600 @ 7.9MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 20 @ 25MHz 60 5.40 240
PE-1008CD682KTT 6800 @ 7.9MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 18 @ 7.9MHz 40 4.90 200
PE-1008CD822KTT 8200 @ 7.9MHz ±10% (K) ±5% (J), ±2% (G), ±1% (F) 18 @ 7.9MHz 25 6.00 160
Notes:
1. Inductance measured using a HP4286A RF Impedance Analyzer.
2. Q measured using a HP4291A RF Impedance Analyzer with a
HP16193A Test Fixture.
3. SRF measured using a HP8753C Network Analyzer.
4. RDC measured using Valhalla Scientific model 4100 ATC Digital
Ohmmeter.
5. Based on a 15oC maximum temperature rise.
6. Sample Kit Part Number: PE-1008CDKIT-T
7. Component Weight: 0.032 grams typical.
8. These components are 0.055" in height.
***For other inductance values in 1008 size, please refer to 1008CM (pages 18-19) and 1008CQ (pages 20-21)***
USA 858 674 8100 ••Germany 49 7032 7806 0 ••Singapore 65 6287 8998 ••Shanghai 86 21 62787060 ••China 86 755 33966678 ••Taiwan 886 3 4356768
www.pulseeng.com 17 WC701.L (4/10)
WIRE-WOUND RF CHIP
INDUCTORS - 1008CM SERIES
Electrical Specifications @ 25°C
Notes:
1. Inductance measured using a HP4191A RF Impedance Analyzer.
2. Q measured using a HP4291A RF Impedance Analyzer with a
HP16193A Test Fixture.
3. SRF measured using a HP8753C Network Analyzer.
4. RDC measured using a Valhalla Scientific model 4100 ATC
Digital Ohmmeter.
5. Based on a 15oC maximum temperature rise.
6. Component Weight: 0.032 grams typical.
Inductance 1Standard Optional Q 2SRF Min 3RDC 4IDC 5
Part Number (nH) Tolerance Tolerance (MIN) (MHz MIN) (ΩMAX) (mA MAX)
PE-1008CM100KTT 10 @ 50MHz ±10% (K) ±5% (J), ±2% (G) 50 @ 500MHz 4500 0.09 1000
PE-1008CM120KTT 12 @ 50MHz ±10% (K) ±5% (J), ±2% (G) 65 @ 500MHz 2300 0.09 1000
PE-1008CM150KTT 15 @ 50MHz ±10% (K) ±5% (J), ±2% (G) 55 @ 500MHz 1850 0.19 1000
PE-1008CM180KTT 18 @ 50MHz ±10% (K) ±5% (J), ±2% (G) 55 @ 350MHz 2200 0.06 1000
PE-1008CM220KTT 22 @ 50MHz ±10% (K) ±5% (J), ±2% (G) 55 @ 350MHz 1800 0.09 1000
PE-1008CM270KTT 27 @ 50MHz ±10% (K) ±5% (J), ±2% (G) 60 @ 350MHz 1500 0.11 1000
PE-1008CM330KTT 33 @ 50MHz ±10% (K) ±5% (J), ±2% (G) 60 @ 350MHz 1800 0.18 800
PE-1008CM390KTT 39 @ 50MHz ±10% (K) ±5% (J), ±2% (G) 70 @ 350MHz 1400 0.12 1000
PE-1008CM470KTT 47 @ 50MHz ±10% (K) ±5% (J), ±2% (G) 70 @ 350MHz 1200 0.08 1000
PE-1008CM560KTT 56 @ 50MHz ±10% (K) ±5% (J), ±2% (G) 60 @ 350MHz 1150 0.12 1000
PE-1008CM680KTT 68 @ 50MHz ±10% (K) ±5% (J), ±2% (G) 70 @ 350MHz 1100 0.07 1000
PE-1008CM820KTT 82 @ 50MHz ±10% (K) ±5% (J), ±2% (G) 65 @ 350MHz 950 0.14 950
PE-1008CM101KTT 100 @ 25MHz ±10% (K) ±5% (J), ±2% (G) 65 @ 350MHz 900 0.15 650
PE-1008CM121KTT 120 @ 25MHz ±10% (K) ±5% (J), ±2% (G) 60 @ 350MHz 825 0.22 650
PE-1008CM151KTT 150 @ 25MHz ±10% (K) ±5% (J), ±2% (G) 50 @ 100MHz 625 0.16 580
PE-1008CM161KTT 160 @ 25MHz ±10% (K) ±5% (J), ±2% (G) 50 @ 100MHz 625 0.25 600
PE-1008CM181KTT 180 @ 25MHz ±10% (K) ±5% (J), ±2% (G) 50 @ 100MHz 650 0.25 600
PE-1008CM201KTT 200 @ 25MHz ±10% (K) ±5% (J), ±2% (G) 50 @ 100MHz 630 0.24 580
PE-1008CM221KTT 220 @ 25MHz ±10% (K) ±5% (J), ±2% (G) 50 @ 100MHz 625 0.28 500
PE-1008CM271KTT 270 @ 25MHz ±10% (K) ±5% (J), ±2% (G) 45 @ 100MHz 525 0.50 500
PE-1008CM331KTT 330 @ 25MHz ±10% (K) ±5% (J), ±2% (G) 50 @ 100MHz 500 0.80 450
PE-1008CM371KTT 370 @ 25MHz ±10% (K) ±5% (J), ±2% (G) 50 @ 100MHz 490 0.80 430
PE-1008CM391KTT 390 @ 25MHz ±10% (K) ±5% (J), ±2% (G) 50 @ 100MHz 475 0.75 425
PE-1008CM401KTT 400 @ 25MHz ±10% (K) ±5% (J), ±2% (G) 50 @ 100MHz 470 0.75 420
PE-1008CM471KTT 470 @ 25MHz ±10% (K) ±5% (J), ±2% (G) 50 @ 100MHz 450 0.70 350
PE-1008CM561KTT 560 @ 25MHz ±10% (K) ±5% (J), ±2% (G) 50 @ 100MHz 425 0.80 350
PE-1008CM621KTT 620 @ 25MHz ±10% (K) ±5% (J), ±2% (G) 45 @ 100MHz 375 1.90 200
PE-1008CM681KTT 680 @ 25MHz ±10% (K) ±5% (J), ±2% (G) 45 @ 100MHz 375 2.30 200
PE-1008CM751KTT 750 @ 25MHz ±10% (K) ±5% (J), ±2% (G) 45 @ 100MHz 350 1.60 200
PE-1008CM821KTT 820 @ 25MHz ±10% (K) ±5% (J), ±2% (G) 40 @ 100MHz 325 3.30 200
PE-1008CM911KTT 910 @ 25MHz ±10% (K) ±5% (J), ±2% (G) 40 @ 50MHz 300 2.10 200
PE-1008CM102KTT 1000 @ 25MHz ±10% (K) ±5% (J), ±2% (G) 40 @ 50MHz 300 1.80 200
PE-1008CM122KTT 1200 @ 10MHz ±10% (K) ±5% (J), ±2% (G) 40 @ 50MHz 250 3.00 200
PE-1008CM152KTT 1500 @ 10MHz ±10% (K) ±5% (J), ±2% (G) 40 @ 50MHz 200 4.00 150
PE-1008CM182KTT 1800 @ 10MHz ±10% (K) ±5% (J), ±2% (G) 40 @ 50MHz 150 5.09 150
PE-1008CM222KTT 2200 @ 10MHz ±10% (K) ±5% (J), ±2% (G) 30 @ 25MHz 80 5.85 150
PE-1008CM272KTT 2700 @ 10MHz ±10% (K) ±5% (J), ±2% (G) 30 @ 25MHz 90 7.70 150
PE-1008CM332KTT 3300 @ 10MHz ±10% (K) ±5% (J), ±2% (G) 25 @ 15MHz 40 7.80 150
PE-1008CM392KTT 3900 @ 10MHz ±10% (K) ±5% (J), ±2% (G) 20 @ 15MHz 35 8.30 135
PE-1008CM472KTT 4700 @ 10MHz ±10% (K) ±5% (J), ±2% (G) 16 @ 15MHz 25 6.00 150
USA 858 674 8100 ••Germany 49 7032 7806 0 ••Singapore 65 6287 8998 ••Shanghai 86 21 62787060 ••China 86 755 33966678 ••Taiwan 886 3 4356768
www.pulseeng.com 18 WC701.L (4/10)
Wirewound ceramic core construction
High Q values and self-resonant frequency
Industry standard 1008 (2520)
surface mount land pattern
See page 3 for Competition Cross Reference
WIRE-WOUND RF CHIP
INDUCTORS - 1008CM SERIES
0
10
20
30
Frequency (MHz)
Q
10 100 1000 10000
40
50
60
70
80
90
100
110
120
12 nH
47 nH
100 nH
330 nH
750 nH
1800 nH
0
Frequency (MHz)
10 100 1000 10000
Inductance (nH)
1000
100
200
300
400
500
600
700
800
900
12 nH
47 nH
330 nH
100 nH
750 nH
Mechanical
Typical Q vs Frequency Typical Inductance vs Frequency
Front and
Back
2X Side 2X Inside
.100
2,54
.045
1,14
2 X .040
1,02
040
.115 MAX
2,92
.110 MAX
2,79
Epoxy Cap
.090 MAX
2,29
Termination Pad
SUGGESTED PAD LAYOUT
2X.020 ±.004
0,51 ±0,10
USA 858 674 8100 ••Germany 49 7032 7806 0 ••Singapore 65 6287 8998 ••Shanghai 86 21 62787060 ••China 86 755 33966678 ••Taiwan 886 3 4356768
www.pulseeng.com 19 WC701.L (4/10)
Dimensions: Inches
mm
Unless otherwise specified
all tolerances are ± .010
0,25
WIRE-WOUND RF CHIP
INDUCTORS - 1008CQ SERIES
Electrical Specifications @ 25°C
Notes:
1. Inductance measured using a HP4191A RF Impedance Analyzer.
2. Q measured using a HP4291A RF Impedance Analyzer with a
HP16193A Test Fixture.
3. SRF measured using a HP8753C Network Analyzer.
4. RDC measured using a Valhalla Scientific model 4100 ATC
Digital Ohmmeter.
5. Based on a 15oC maximum temperature rise.
6. Component Weight: 0.032 grams typical.
Inductance 1Standard Optional Q 2SRF Min 3RDC 4IDC 5
Part Number (nH) Tolerance Tolerance (MIN) (MHz MIN) (ΩMAX) (mA MAX)
PE-1008CQ4N1KTT 4.1 @ 50MHz ±10% (K) ±5% (J) 75 @ 1500MHz 6000 0.05 1600
PE-1008CQ100KTT 10 @ 50MHz ±10% (K) ±5% (J) 60 @ 500MHz 3600 0.06 1600
PE-1008CQ120KTT 12 @ 50MHz ±10% (K) ±5% (J) 70 @ 500MHz 2800 0.06 1500
PE-1008CQ180KTT 18 @ 50MHz ±10% (K) ±5% (J) 62 @ 350MHz 2700 0.07 1400
PE-1008CQ220KTT 22 @ 50MHz ±10% (K) ±5% (J) 62 @ 350MHz 2050 0.07 1400
PE-1008CQ330KTT 33 @ 50MHz ±10% (K) ±5% (J) 75 @ 350MHz 1700 0.09 1300
PE-1008CQ390KTT 39 @ 50MHz ±10% (K) ±5% (J) 75 @ 350MHz 1300 0.09 1300
PE-1008CQ470KTT 47 @ 50MHz ±10% (K) ±5% (J) 75 @ 350MHz 1450 0.12 1200
PE-1008CQ560KTT 56 @ 50MHz ±10% (K) ±5% (J) 75 @ 350MHz 1230 0.12 1200
PE-1008CQ680KTT 68 @ 50MHz ±10% (K) ±5% (J) 80 @ 350MHz 1150 0.13 1100
PE-1008CQ820KTT 82 @ 50MHz ±10% (K) ±5% (J) 80 @ 350MHz 1060 0.16 1100
PE-1008CQ101KTT 100 @ 50MHz ±10% (K) ±5% (J) 62 @ 350MHz 820 0.16 1000
PE-1008CQ121KTT 120 @ 50MHz ±10% (K) ±5% (J) 62 @ 350MHz 800 0.17 1000
PE-1008CQ151KTT 150 @ 50MHz ±10% (K) ±5% (J) 60 @ 350MHz 750 0.21 950
PE-1008CQ181KTT 180 @ 50MHz ±10% (K) ±5% (J) 40 @ 350MHz 720 0.23 920
PE-1008CQ221KTT 220 @ 50MHz ±10% (K) ±5% (J) 35 @ 350MHz 680 0.29 900
PE-1008CQ271KTT 270 @ 50MHz ±10% (K) ±5% (J) 35 @ 350MHz 600 0.55 600
PE-1008CQ331KTT 330 @ 50MHz ±10% (K) ±5% (J) 35 @ 100MHz 550 0.60 550
PE-1008CQ391KTT 390 @ 50MHz ±10% (K) ±5% (J) 35 @ 350MHz 500 0.82 470
USA 858 674 8100 ••Germany 49 7032 7806 0 ••Singapore 65 6287 8998 ••Shanghai 86 21 62787060 ••China 86 755 33966678 ••Taiwan 886 3 4356768
www.pulseeng.com 20 WC701.L (4/10)
Wirewound ceramic core construction
High Q values and Idc values
High self-resonant frequency
Industry standard 1008 (2520)
surface mount land pattern
See page 3 for Competition Cross Reference
WIRE-WOUND RF CHIP
INDUCTORS - 1008CQ SERIES
12000100 1000
0
20
40
60
80
100
120
140
Frequency (MHz)
Q
560
390
220
120
180
330
100
Frequency (MHz)
100
15 10 100 500 1000 1800
120
220
390
470
1
10
100
1000
Inductance (nH)
Mechanical
Typical Q vs Frequency Typical Inductance vs Frequency
Front and
Back
2X Side 2X Inside
.100
2,54
.045
1,14
2 X .040
1,02
040
.115 MAX
2,92
.110 MAX
2,79
Epoxy Cap
.090 MAX
2,29
Termination Pad
SUGGESTED PAD LAYOUT
2X.020 ±.004
0,51 ±0,10
USA 858 674 8100 ••Germany 49 7032 7806 0 ••Singapore 65 6287 8998 ••Shanghai 86 21 62787060 ••China 86 755 33966678 ••Taiwan 886 3 4356768
www.pulseeng.com 21 WC701.L (4/10)
Dimensions: Inches
mm
Unless otherwise specified
all tolerances are ± .010
0,25
WIRE-WOUND RF CHIP
INDUCTORS - 1206CD SERIES
Electrical Specifications @ 25°C
Notes:
1. Inductance measured using a HP4286A RF Impedance Analyzer.
2. Q measured using a HP4291A RF Impedance Analyzer with a HP16193A Test
Fixture.
3. SRF measured using a HP8753C Network Analyzer.
4. R
DC
measured using a Valhalla Scientific model 4100 ATC Digital Ohmmeter.
5. Based on a 15
o
C maximum temperature rise.
6. Sample Kit Part Number: PE-1206CD KIT-T
7. Component Weight: 0.035 grams typical.
8. These components are 0.060” in height.
Inductance1Standard Optional Q2SRF Min3RDC4IDC5
Part Number (nH) Tolerance Tolerance (MIN) (MHz MIN) (ΩMAX) (mA MAX)
PE-1206CD030KTT 3.3 @ 100MHz ±10% (K) ±5% (J), ±2% (G) 30 @ 300MHz 6200 0.05 1000
PE-1206CD060KTT 6.8 @ 100MHz ±10% (K) ±5% (J), ±2% (G) 30 @ 300MHz 5500 0.07 1000
PE-1206CD100KTT 10 @ 100MHz ±10% (K) ±5% (J), ±2% (G) 40 @ 300MHz 4000 0.08 1000
PE-1206CD120KTT 12 @ 100MHz ±10% (K) ±5% (J), ±2% (G) 40 @ 300MHz 3200 0.08 1000
PE-1206CD150KTT 15 @ 100MHz ±10% (K) ±5% (J), ±2% (G) 40 @ 300MHz 3200 0.10 1000
PE-1206CD180KTT 18 @ 100MHz ±10% (K) ±5% (J), ±2% (G) 50 @ 300MHz 2800 0.10 1000
PE-1206CD220KTT 22 @ 100MHz ±10% (K) ±5% (J), ±2% (G) 50 @ 300MHz 2200 0.10 1000
PE-1206CD270KTT 27 @ 100MHz ±10% (K) ±5% (J), ±2% (G) 50 @ 300MHz 1800 0.11 1000
PE-1206CD330KTT 33 @ 100MHz ±10% (K) ±5% (J), ±2% (G) 55 @ 300MHz 1800 0.11 1000
PE-1206CD390KTT 39 @ 100MHz ±10% (K) ±5% (J), ±2% (G) 55 @ 300MHz 1800 0.12 1000
PE-1206CD470KTT 47 @ 100MHz ±10% (K) ±5% (J), ±2% (G) 55 @ 300MHz 1500 0.13 1000
PE-1206CD560KTT 56 @ 100MHz ±10% (K) ±5% (J), ±2% (G) 55 @ 300MHz 1450 0.14 1000
PE-1206CD680KTT 68 @ 100MHz ±10% (K) ±5% (J), ±2% (G) 55 @ 300MHz 1200 0.26 900
PE-1206CD820KTT 82 @ 100MHz ±10% (K) ±5% (J), ±2% (G) 55 @ 300MHz 1200 0.21 900
PE-1206CD101KTT 100 @ 100 MHz ±10% (K) ±5% (J), ±2% (G) 55 @ 300MHz 1100 0.26 850
PE-1206CD121KTT 120 @ 100MHz ±10% (K) ±5% (J), ±2% (G) 60 @ 300MHz 1100 0.26 800
PE-1206CD151KTT 150 @ 100MHz ±10% (K) ±5% (J), ±2% (G) 60 @ 300MHz 950 0.31 750
PE-1206CD181KTT 180 @ 50MHz ±10% (K) ±5% (J), ±2% (G) 60 @ 300MHz 900 0.43 700
PE-1206CD221KTT 220 @ 50MHz ±10% (K) ±5% (J), ±2% (G) 60 @ 300MHz 760 0.50 670
PE-1206CD271KTT 270 @ 50MHz ±10% (K) ±5% (J), ±2% (G) 55 @ 300MHz 730 0.56 630
PE-1206CD331KTT 330 @ 50MHz ±10% (K) ±5% (J), ±2% (G) 45 @ 150MHz 650 0.62 590
PE-1206CD391KTT 390 @ 50MHz ±10% (K) ±5% (J), ±2% (G) 45 @ 150MHz 600 0.75 530
PE-1206CD471KTT 470 @ 50MHz ±10% (K) ±5% (J), ±2% (G) 45 @ 150MHz 550 1.30 490
PE-1206CD561KTT 560 @ 35MHz ±10% (K) ±5% (J), ±2% (G) 45 @ 150MHz 470 1.34 460
PE-1206CD621KTT 620 @ 35MHz ±10% (K) ±5% (J), ±2% (G) 45 @ 150MHz 470 1.58 430
PE-1206CD681KTT 680 @ 35MHz ±10% (K) ±5% (J), ±2% (G) 45 @ 150MHz 450 1.58 430
PE-1206CD751KTT 750 @ 35MHz ±10% (K) ±5% (J), ±2% (G) 45 @ 150MHz 440 2.25 400
PE-1206CD821KTT 820 @ 35MHz ±10% (K) ±5% (J), ±2% (G) 45 @ 150MHz 420 1.82 400
PE-1206CD911KTT 910 @ 35MHz ±10% (K) ±5% (J), ±2% (G) 45 @ 150MHz 410 2.95 400
PE-1206CD102KTT 1000 @ 35MHz ±10% (K) ±5% (J), ±2% (G) 45 @ 150MHz 400 2.80 320
PE-1206CD122KTT 1200 @ 35MHz ±10% (K) ±5% (J), ±2% (G) 45 @ 150MHz 380 3.20 300
USA 858 674 8100 ••Germany 49 7032 7806 0 ••Singapore 65 6287 8998 ••Shanghai 86 21 62787060 ••China 86 755 33966678 ••Taiwan 886 3 4356768
www.pulseeng.com 22 WC701.L (4/10)
Wirewound ceramic core construction
High Q values and self-resonant frequency
Industry standard 1206 (3216) SMT land pattern
See page 3 for Competition Cross Reference
WIRE-WOUND RF CHIP
INDUCTORS - 1206CD SERIES
121
Part Code
(Typical) .005/0,13
2X.020 ±.003
0,51 ±0,08
BOTTOM VIEW
.140 MAX
3,56
.085 MAX
2,16
.060
1,52
Dimensions: Inches
mm
Unless otherwise specified
all tolerances are ± .010
0,25
.070
1,78
2 X .040
1,02
.076
1,93
Mechanical
0
20
40
60
80
100
120
10 100 1000 10000
FREQUENCY(MHz)
Q FACTOR
030
151
150
330
331
681
030
151
150
330
331
681
1
10
100
1000
10000
1 10 100 1000 10000
FREQUENCY(MHz)
INDUCTANCE(nH)
030
180
151
561
122
470
Typical Q vs Frequency
Typical Inductance vs Frequency
USA 858 674 8100 ••Germany 49 7032 7806 0 ••Singapore 65 6287 8998 ••Shanghai 86 21 62787060 ••China 86 755 33966678 ••Taiwan 886 3 4356768
www.pulseeng.com 23 WC701.L (4/10)
WIRE-WOUND
RF CHIP INDUCTORS
Application Notes
The Basics of Wire-Wound Chip Inductors
Pulse currently supplies high quality magnetic products to companies such as 3COM, Cisco, Ericsson, Intel, Marconi,
Nokia and Nortel and has been active in the field of RF engineering, since the launch of its first wire-wound 1008
chip product in 1982. Pulse now offers seven ranges of wire-wound chip from 0402 to 1206 (see table 1.0 below):
the "CD Range" with 100% compatibility to other market leaders, and the "CM and CQ ranges" with improved
electrical performance or alternative inductance values with a ceramic core construction; the FT series with a
Ferrite core construction.
In recent years, Pulse has leveraged its strength within the Telecoms and Networking industry to extend its product
range to encompass RF products for the Cable Modem, CATV, MMDS and TETRA markets. Pulse now also offers
Wide Bandwidth RF Transformers, Splitter Combiners, Couplers, Diplexers, Low Pass Filters and High Power
Impedance Matching Transformers. To explore the complete range of RF products, visit the Pulse website:
http://www.pulseeng.com./Products/finder/rf_hfc_cable.htm for cable products and
http://www.pulseeng.com/scripts/finder/rfind/mcis.cfm for RF chip inductors.
Pulse Inductance Number Tolerance Range Availability
Part No. Range (nH) of Values
PE-0402CD 1.0 ~ 120 48 2, 5 & 10% In Mass Production
PE-0603CD 1.6 ~ 390 55 2, 5 & 10% In Mass Production
PE-0805CD 2.8 ~ 1500 40 1, 2, 5 & 10% In Mass Production
PE-0805CM 3.3 ~ 820 27 2, 5 & 10% In Mass Production
PE-0805FT 1000 ~ 68000 12 5 & 10% In Mass Production
PE-1008CD 4.0 ~ 8200 71 1, 2, 5 & 10% In Mass Production
PE-1008CM 4.7 ~ 4700 40 2, 5 & 10% In Mass Production
PE-1008CQ 3.0 ~ 390 19 5 & 10% In Mass Production
PE-1206CD 3.3 ~ 1200 31 2, 5 & 10% In Mass Production
Table 1.0 Pulse Chip Inductor Product Range
Competing Chip Inductor Types
Capacitor and resistors are available in a wide variety of sizes and component values and it is possible to purchase
almost any value, tolerance or other rating. Inductors, on the other hand, are not so readily available and engineers
may find it necessary to wind their own inductors to get a specific value of inductance.
There are mainly 3 varieties of inductor in common use today and they are wire-wound, multi-layer and drum core
chip inductors. The primary differences between these competing types are the core material used to enhance the
inductance of coil and the construction method. Wire is wound around a ceramic or ferrite bobbin or in the case of
multi-layer the coil is formed by interconnecting layers of conductive material printed on a ceramic substrate.
Table 2.0 indicates that the performance merits of wire-wound inductors versus the alternative multi-layer and drum
core platforms. If price were the only consideration then, of course, there would be no market available for wire-wound
chip inductors. But price is not the only consideration, since RF engineers must also consider the needs of the
application in terms of Q factor, Idc (maximum current carrying capacity). Rdc (resistance at dc), Tolerance and
SRF (self-resonant or series resonant frequency).
Material
SMT Technology Substrate Q Factor SRF Idc Tolerance
Chip Inductor Wire-wound Ceramic High High High Good
Chip Inductor Wire-wound Ferrite Low Low High Poor
Multi-layer Printed Ceramic Low Low Low Poor
Drum Core Wire-wound Ferrite Low Low Low Poor
Table 2.0 Summary of Chip Inductor Relative Performance
USA 858 674 8100 ••Germany 49 7032 7806 0 ••Singapore 65 6287 8998 ••Shanghai 86 21 62787060 ••China 86 755 33966678 ••Taiwan 886 3 4356768
www.pulseeng.com 24 WC701.L (4/10)
