First Edition LCD Module Technical Specification May 12, 2008 Final Revision Deke tyweno. 1-55334GD104J-FW-A-AAN Customer Customer's Product No OPTREX CORPORATION Approved : Checked : Prepared : Minoru Akatsuka QUALITY ASSURANCE DIVISION Toshiyuki Okamoto DESIGN 2T Satoshi Sano DESIGN 2T APPROVED By Signature : Date : Please return this specification within two month with your signature. If not returned within two month ,specification will be considered as having been accepted. T-55334GD104J-FW-A-AAN (AA) OPTREX CORPORATION Page 1/36 OPTREX ConfidentialCONTENTS Item Page CONTENTS a APPLICATION OVERVIEW ABSOLUTE MAXIMUM RATINGS ELECTRICAL CHARACTERISTICS INTERFACE PIN CONNECTION INTERFACE TIMING wml wml] oyo;se | wl] bs BLOCK DIAGRAM MECHANICAL SPECIFICATION 14 Oo} a ;yn] oy ot] ee | wy] bh OPTICAL CHARACTERISTICS 16 So RELIABILITY TEST CONDITION 19 INSPECTION STANDARDS 20 bo OTHER FEATURE 21 co HANDLING PRECAUTIONS FOR TFT-LCD MODULE 22 PACKAGING SPECIFICATION 25 PRODUCTS NUMBER LABELING FORMS 28 LAMP UNIT for 10.4"VGA 30 Revision History Rev. Date Page Comment T-55334GD104J-FW-A-AAN (AA) OPTREX CORPORATION Page 2/36 OPTREX Confidential1. APPLICATION This specification applies to color TFT-LCD module, T-55334GD104J-FW-A-AAN. These specification papers are the proprictary product of OPTREX and include matcrials protected under copyright of OPTREX. No part of this document may be reproduced in any form or by any means without the express written permission of OPTREX. OPTREX does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a product specified in this document. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of OPTREX or of others. OPTREX classifies the usage of the TFT-LCD module as follows. Please confirm the usage before using the product. (1) Standard Usage Computers, office equipment, factory automation equipment, test and measurement equipment, communications, transportation equipment(automobiles, ships, trains, etc.), provided, however, that operation is not influenced by TFT-LCD directly. (2) Special Usage Medical equipment, safety equipment, transportation equipment, provided, however, that TFT-LCD is necessary to its operation. (8) Specific Usage Cockpit Equipment, military systems, aerospace equipment, nuclear reactor control systems, life support systems and any other equipment. OPTREX should make a contract that stipulate apportionment of responsibilities between OPTREX and our customer. The product specified in this document is designed for Standard Usage unless otherwise specified in this document. If customers intend to use the product for applications other than those specified for Standard Usage, they should first contact OPTREX sales representative for it's intended use in writing. OPTREX has been making continuous effort to improve the reliability of its products. Customers should implement sufficient reliability design of their application equipments such as redundant system design, fail-safe functions, anti-failure features. OPTREX assumes no responsibility for any damage resulting from the use of the product that does not comply with the instructions and the precautions specified in this document. Please contact and consult a OPTREX sales representative for any questions regarding this product. T-55334GD104J-FW-A-AAN (AA) OPTREX CORPORATION Page 3/36 OPTREX Confidential2. OVERVIEW T-55334GD104J-FW-A-AAN is 10.4 color TFT-LCD (Thin Film Transistor Liquid Crystal Display) module composed of LCD panel, driver ICs, control circuit, and backlight unit. By applying 6 bit digital data 640 x 480, 262k-color images are displayed on the 10.4 diagonal screen. Input power voltage is 3.3 V for LCD driving. The type of data and control signals are digital and transmitted via CMOS interface per Typ. 25 MHz clock cycle. Inverter for backlight is not included in this module. General specifications are summarized in the following table: ITEM SPECIFICATION Display Area (mm) Gin diagonal Number of Dots 640 x 3 (A) x 480 (V) Pixel Pitch (mm) 0.33 (H) x 0.33 (V) Color Pixel Arrangement RGB vertical stripe Display Mode Normally white TN Number of Color 262k Luminance (cd/m?) 1500 Wide Viewing Angle Technology Optical compensation film Viewing Angle (CR > 10) -~70~70 (H) + -65~65 (V) Surface Treatment Anti-glare and hard-coating 3H Electrical Interface CMOS Optimum Viewing Angle (Contrast. ratio) 6 o'clock Module Size (mm) 241,0(W) x 181.6(H) x 16.0(D) Module Mass (g) 650 Backlight Unit CCFI, 4-tubes, edge-light, replaceable Characteristic value without any note is typical value. T-55334GD104J-FW-A-AAN (AA) OPTREX CORPORATION Page 4/36 OPTREX Confidential3. ABSOLUTE MAXIMUM RATINGS ITEM SYMBOL MIN. MAX. UNIT Power Supply Voltage for LCD VCC -0.3 4.0 Vv Logic Input Voltage VI -0.3 6.0 Vv Lamp Voltage VL 0 2000 Vrms Lamp Current TT, 0 20 mArms Lamp Frequency FL 100 kHz Operation Temperature (Panel) Note 1,2) Top(Panel) 20 70 C Operation Temperature (Ambient) Note Top(Ambient) -20 70 C Storage Temperature Note 2) T stg A0) 80 C [Note] 1) Measured at the center of active area and at the center of panel back surface 2) Top, Tstg < 40C 90%RH max. without condensation Top, Tstg > 40C : Absolute humidity shall be less than the value of 90% RH at 40C without condensation. 4. ELECTRICAL CHARACTERISTICS (1) TFT- LCD Ambient temperature: Ta = 25C ITHM SYMBOI. | MIN. TYP. MAX. UNIT Remarks Power Supply Voltage for LCD VCC 3.0 3.3 3.6 V *1) Power Supply Current for LCD ICC 300 440 mA *2) Permissive Input Ripple Voltage VRP 100 mVp-p VCC = 43.3V ; High VIH 2.0 5.5 Vv Logic Input Voltage Low VIL 0 -- 0.8 Vv *1) Power and signals sequence: tl<10ms 200 ms < t4 0<t2<50ms 200 ms < td 0<t3<50ms O0<t6 vec ogvec_/ + o.9vec LCD Power Supply Lagic Signal data 1 1 ewe loaves | o.1vCC tt} 12 | t3 | t4 | Backlight Power Supply 5 t6 data: RGB DATA, DCLK, DENA, SC T-55334GD104J-FW-A-AAN (AA) OPTREX CORPORATION Page 5/36 OPTREX ConfidentialVCC-dip conditions: 1) When 2.4 V < VCC <3.0 V, td< 10 ms 2) When VCC < 2.4 V VCC-dip conditions should also follow the power and signals sequence. Nonna td <_$_ *2) VCC =+ 3.8 V, fa=31.5kHz, fy=60Hz, fcuk= 25MHz Display image of typical is 64-gray-bar pattern (6 bit), 480 line mode. Vcc *3) Huse Parameter Fuse Type Name Supplier Remark VCC FCC16162AB Kamaya Electric Co., Ltd. *) *) The power supply capacity should be designed to be more than the fusing current. (2)Backlight Ta=25C ITEM SYMBOL| MIN, TYP. MAX. UNIT Remarks Lamp Voltage VIL A470 Vrms Tl. = 13.0 mArms Lamp Current IL 6.0 13.0 15.0 mArms *2) *6) Lamp Frequency FL 30 - 100 kHz * 3) 900 Vrms Ta = 25C Starting Lamp Voltage VS 1350 Vrms Ta = 0C 1440 Vrms Ta =-20C Lamp Life Time LT 50000 h el Ohevation *1) Pleasc usc synchronous inverter. *9) Lamp Current measurement method (The current meter is inserted in low voltage line.) CTL CTH CTH A Inverter T-55334GD104J-FW-A-AAN (AA) OPTREX CORPORATION Page 6/36 OPTREX Confidential*3) Lamp frequency of inverter may produce interference with horizontal synchronous frequency, and this may cause horizontal beat on the display. Therefore, please adjust lamp frequency, and keep inverter as far from module as possible or use electronic shielding between inverter and module to avoid the interference. *4) Lamp life time is defined as the time either when the brightness becomes 50% of the initial value, or when the starting lamp voltage does not meet the value specified in this table. *5) The life time of the backlight depends on the ambient temperature. The life time will decrease under low/high temperature. *6) Please use the inverter which has symmetrical current wave form as follows, The degree of unbalance: less than 10% The ratio of wave height: less than /2+10% Toy 4 WW Vv CURRENT WAVE FORM Ipy' High side peak The degree of unbalance = | Ipy- Ip, /Irms x 100(%) The ratio of wave height = I,,(or Ip,) / Irms Ip, Low side peak T-55334GD104J-FW-A-AAN (AA) OPTREX CORPORATION Page 7/36 OPTREX Confidential5. INTERFACE PIN CONNECTION (1) CN 1Cnterface Signal) Used connector: DF9B-31P-1V@2) (HIROSE) Corresponding connector: DF9-31S-1V (AIROSE) Pin No. | Symbol Function 1 GND 2 DCLK | Clock signal for sampling catch data signal 3 HD Horizontal syne signal *1) 4 VD Vertical syne signal *1) 5 GND 6 RO Red data signal(LSB) 7 R1 Red data signal 8 R2 Red data signal 9 R38 Red data signal 10 R4 Red data signal 11 Rb5 Red data signal(MSB) 12 GND 13 GO Green data signal(LSB) 14 G1 Green data signal 15 G2 Green data signal 16 G3 Green data signal 17 G4 Green data signal 18 Gd Green data signal(MSB) 19 GND 20 BO Blue data signal(LSB) 21 Bl Blue data signal 22 B2 Blue data signal 23 B38 Blue data signal 24 BA Blue data signal 25 B5 Blue data signal(MSB) 26 GND 27 DENA Data enable signal (to settle the viewing area) 28 VCC 3.3 V Power Supply 29 VCC 3.3 V Power Supply 30 GND 31 SC Scan direction control (Low=Normal, High=Reverse) *1) HD and VD are not being used for timing control. *2) Metal frame is connected to signal GND. (2) CN 2, 3 (Backlight) Backlight-side connector: BHR-04VS-1 (JST) Inverter-side connector: SM04(4.0)B-BHS(LF)(SN) (JST) Pin No. Symbol Function 1,2 CTH VBLH (High Voltage) 4 CTL VBLL (Low Voltage) [Note] VBLH-VBLL=VL T-55334GD104J-FW-A-AAN (AA) OPTREX CORPORATION Page 8/36 OPTREX Confidential6. INTERFACE TIMING (1) Timing Specifications ITEM SYMBOL] MIN. TYP. MAX. UNIT Frequency fotK 20 25 30 MHz Period tcLK 33.3 40 50 ns DCLK Low Width tweL 10 a 7 ns High Width twou 10 - - ns DATA(R,G.B), [Set up Lime ios 4 - ns DENA Hold time tpH 4 a ns Active Time tHA 640 640 640 tcLK Horizontal Blanking Time tHB 20 160 - tcLK Frequency fu 27 31.5 38 kHz Period tH 26.3 31.7 37.0 Us DENA Active Time tva 480 480 480 ty Vortical Blanking Time tvp 4 45 - ty Frequency fv 55 60 70 Hz Period tv 14.3 16.7 18.2 ms [Note] 1) DATA is latched at fall edge of DCLK in this specification. 2) DENA (ata Enable) should always be positive polarity as shown in the timing specification. 3) DCLK should appear during all invalid period. 4) In case of blanking time fluctuation, please satisfy following condition. tvBn > tvBn-1 3(tH) T-55334GD104J-FW-A-AAN (AA) OPTREX CORPORATION Page 9/36 OPTREX Confidential(2) Timing Chart a. Pixel Timing Chart tcLK DCLK ) DATA(R,G,B), DENA 2.0V 0.8V b. Horizontal Timing Chart First Data |_- Last Data * DATA Invalid Data 1 2 3 639 640 Invalid Data (R,G,B) tus | tia x \\ DENA Ae tu=1/fa c. Vertical Timing Chart Invalid Data tyB 4 4 < me oe PLU tv=lify LINE DATA A Vv T-55334GD104J-FW-A-AAN (AA) OPTREX CORPORATION Page 10/36 OPTREX Confidential(3) Color Data Assignment INPUT DATA R DATA G DATA B DATA COLOR R5:R4: RB: R2: RL: RO| G5: G4:G38:G2:iGl: G0] BS: B4: BB: B2: BI: BO MSB LSB [MSB LSB [MSB LSB BLACK 0:0:0:0:0:0/0:0:0:0:0:0/,0:0:0:0:0: 0 RED@3) 1 titi titi t{~o:0:0:0:0:0]0:0:0:0: 0: 0 GREENG3)| 0. 0:0:0:0:-0]/1:1:,1:1:1:1/,0:0:0:0:0:0 BASIC |BLUE@3) 0:-0:0:0:0,0/0:0, 0:;0:;0:0/1:1:1, 1:1: 1 COLOR |CYAN 0 0:0:;0:0,0]121 12:72:75 7/) 757272575151 MAGENTA] 1:1: 12:1:17:1/0:0:0:0:0:0/1:1:1:1:1:1 YELLOW Tot: li: 1: 1:2} 1: 12-1: 1:1:1/0:;:0:0:0:0: 0 WHITE Loetite lteter tp iep ti lil: lilj|ii: lilt: tli lil RED() 0-0:0:0:0,1/0:0:0:;0:0:0/0:0:0.0:0: 0 REDQ) 0:0:0:0:1:0/0:0:;0:;0:0:0/0:0:0,0:0:0 RED RED@z2) 1 ti:t1:1;1;0/0:;0:;0;0;0;0]0:;0;0:;0;0: 0 RED3) 1 titi tit:17/,0:0:0:5:0:0:,0}/0:,:0,0:0:0: 0 GREENG@) |0 0:0:0:0,0/0:0,0:0:0:1/0:0:0:0:0:0 GREEN2) |0,.0:0:0:0,-0/0:0,.0:0:1:0/0:0:0:.,0:0:0 GREEN GREENG2)}0.-0:0:0:0:,0];[1:1,5,1:1:1:010:;0:0, 0:0:0 GREENG3)| 0.0250: 0:0.,0}/1:1:,1:1:1:1/0:0:0:,0:0:50 BLUE() 0:0:0:0:0,0/0:0 0:0:0:0/0:0:0,0:0: 1 BLUE@) 0:0:;0:0;0,0]0:0:;:0;0:0;0/0;0;0,0:;1:0 BLUE BLUE@62) 0 0 0 O;1:i 1:15 1:1: 0 BLUE@3) 0 0 0 Of1 1:1 151/51 [Note] 1) Definition of gray scale Color (n) ---n indicates gray scale level. Higher n means brighter level. 2) Data 1:High, 0: Low T-55334GD104J-FW-A-AAN (AA) OPTREX CORPORATION Page 11/36 OPTREX Confidential(4) Display Position and Sean Direction D(X, Y) shows the data number of input. signal for LCD panel signal processing PCB. SC: Low SC: High Dd, =s D40,1) i D(640,480)< D480) i S << x << Dd,480) 4" D(6 40,480) ] D640.) <_ Dq,,1) ] T-55334GD104J-FW-A-AAN (AA) OPTREX CORPORATION Page 12/36 OPTREX Confidential7. BLOCK DIAGRAM CN1 Timing signal Display data Timing > Controller Power I/F Connector Gt TFT-LCD $1919 1] $1920 | Driver(source) CN2, 3 T-55334GD104J-FW-A-AAN (AA) OPTREX CORPORATION Page 13/36 OPTREX Confidential8. MECHANICAL SPECIFICATIONS (1) Front Side 0 s OU nN 2 ee i$ a Lb CONTN=EdO 14258> Si LlLStl (a's: a (=uVv SATLOVY) PSal _ 2 2 O ZEl eu . wo S50. ere lO . ba O NR [| (e792) oS ~ 5 Le = : > < - - = ome) (3 Lt ) i 1 faa +l cc . / -_ ~ 5 . ~_ G w oO {9 LL) | I | a A Gre . J a Se rae lined L o [Lo ss | vs ye em i 26 4 ES | i \ ~~ | ~~ Lo dq) | | be | - ) | a : _ _ A th WW m : | E | st & | = = . Q a) Jo 2}3 = qf) =| i im | Z| | = | ui} <x > oO \ O}w KI > \ a} \ ; ale] |: -----_-_--_+ 5 iif < O N a) n Tou to: fp Lo} d) a aw 7 m | | ~ ' me] ! a} | 8 ) - S mS , | oN 4 \If [ __ = __ __| ar q So | *. | Ts wh _ _ - _ - _ {ree i T. sep , rN | = 1 ( ) > \ ie v SG}. S 6) 2 () dL > me) Z L a = ('e8) EER + 999 Ps : (308 - BOE 6 =] my 8 a7 18 a "| NN : | =} } Ty iz LI e g ry IP I (Unit:mm) - -FW-A- age T-55334GD104J-FW-A-AAN (AA OPTREX CORPORATION Page 14/36 OPTREX Confidentialuolzyosfoud sleue pu.ulce CLSPIL-SAVO-YHETERNDS ZNO "Perou sseyun wwGr OF St souese lol cyt (SSOHIHICZEIAL-dlLE-S640: IND 6 OS OE N oO Fy 4 eee > ar] a ib C le . Ww Cc) i oO Ol e oO} \) 8 AX HALNAD Mal VYauv 1a8vi< Bee LOH? 1 (2) Rear Side Q100:7 (zr) A mm) t 1 Page 15/36 (Un OPTREX CORPORATION (AA) T-55334GD104J-FW-A-AAN OPTREX Confidential9. OPTICAL CHARACTERISTICS Ta=25C, VCC=3.3 V, Input Signals: Typ. Values shown in Section 6 ITEM SYMBOL} CONDITION | MIN. TYP. MAX. | UNIT | Remarks Contrast Ratio CR Oy=0, On=0 450 700 *1)*2)*5) Luminance Lw Ov=0, OH=0 | 1000 1500 cd/m2 | *1)*5) luminance Uniformity Al.w Ov=0, OH=0 30 % *1)*3)*5) ; tr Ov=0, O4=0 4 ms *1)*4)*5) Response Time tf Ov=0, Ou=0 12 ms | *1)*4)*5) - Horizontal Ou OR 10 -50~50 | -70~70 *1)*5) Viewing Vortical Ov -40~40 | -65~65 *1)*5) Angle Horizontal OH OR>5 -~65~65 | -80~80 *1)*5) Vertical Ov -50~50 | -80~80 *1)*5) Image Sticking tis 2h 2 8 *6) Red Rx 0.554 0.584 0.614 Ry 0.301 0.331 0.361 Color Green Gx 0.299 0,329 0.359 Coordinates Gy 0.503 0,533 0.563 *1)*5) Oy=0, H=0 Blue Bx 0.132 0.162 0.192 By 0.130 0.160 0.190 White Wx 0.283 0.318 0.348 Wy 0.299 0.3829 0.859 [Note] These items are measured using CS1O00(MINOLTA) for color coordinates, EZContrast(KLDIM) tor viewing angle and CS1000 or BM-5A(TOPCON) for others under the dark room condition (no ambient light) after more than 30 minutes from turning on the lamp unless noted. Condition: IL=13.0 mArms, FL=53 kHz Measurement method for luminance and color coordinates is as follows. Photodetector ; Luminance : 0=2 (BM-5A) 8 (Fiel (Field) Color coordinates :8=1 (CS1000) _ ae 500 mm TFT-LCD module | The luminance is measured according to FLAT PANEL DISPLAY MEASUREMENTS STANDARD (VESA Standard). T-55334GD104J-FW-A-AAN (AA) OPTREX CORPORATION Page 16/36 OPTREX Confidential*1) Measurement Point Contrast Ratio, Luminance, Response Time, Viewing Angle, Color Coordinates: Display Center Luminance Uniformity: point 1~5 shown in a figure below (1,1) 160 320 480 1 2 120 OD 5 240 a 3 4 360 Dp OD (640,480) *2) Definition of Contrast Ratio CR=Luminance with all white pixels / Luminance with all black pixels *3) Definition of Luminance Uniformity ALw=[Lw(MAX)/Lw(MIN)-1] x 100 *4) Definition of Response Time White Luminance 10% Black 10% *5) Definition of Viewing Angle (vy, 01) Normal Axis \ \ ! \ vo eH Upper(+) 4 oN a 1 uw \ , 1 { \ I \ { T___-. Right (+) aa ee ek LCD panel Lower(-) T-55334GD104J-FW-A-AAN (AA) OPTREX CORPORATION Page 17/36 OPTREX Confidential*6) Image Sticking Continuously display the test pattern shown in the figure below for two-hours. Then display a completely white screen. The previous image shall not persist more than two seconds at 25C. = Cols 318-322 a wi Area | Black Lines TEST PATTERN FOR IMAGE STICKING TEST T-55334GD104J-FW-A-AAN (AA) OPTREX CORPORATION Page 18/36 OPTREX Confidential10. RELIABILITY TEST CONDITION (1) Temperature and Humidity ITEM CONDITIONS HIGH TEMPERATURE ANC, 90%RH, 240 h HIGH HUMIDITY OPERATION (No condensation) HIGH TEMPERATURE OPERATION 70C, 240 h LOW TEMPERATURE OPERATION -20C, 240 h HIGH TEMPERATURE STORAGE 80C, 240 h LOW TEMPERATURE STORAGE -20C, 240 h ; BETWEEN ~20C (1h) and 80C(1h), THERMAL SHOCK (NON-OPERATION) 100 CYCLES (2) Shock & Vibration ITEM CONDITIONS Shock level: 1470m/s? (50G) STTOCK Waveform: half sinusoidal wave, 2ms (NON-OPERATION) | Number of shocks: one shock input in each direction of three mutually perpendicular axis for a total of six shock inputs Vibration level: 9.8m/s? (1.0G) Waveform: sinusoidal VIBRATION Frequency range: 5 to 500Hz (NON-OPERATION) | Frequency sweep rate: 0.5 octave /min Duration: one sweep from 5 to 500 Hz in each of three mutually perpendicular axis(total 3 hours) (83) Judgment standard The judgment of the above tests should be madc as follow: Pass: Normal display image, no damage of the display function. (ex. no line defect) Partial transformation of the module parts should be ignored. Fail: No display image, damage of the display function. (ex. line defect) T-55334GD104J-FW-A-AAN (AA) OPTREX CORPORATION Page 19/36 OPTREX Confidential