ASMT-Jx3x
3W Mini Power LED Light Source
Data Sheet
Description
The 3W Mini Power LED Light Source is a high perfor-
mance energy e cient device which can handle high
thermal and high driving current. Option with electrically
isolated metal slug is also available.
The White Mini Power LED is available in the range of color
temperature from 2700K to 10000K.
The low pro le package design and ultra small footprint is
suitable for a wide variety of applications especially where
space and height is a constraint.
The package is compatible with re ow soldering process.
To facilitate easy pick & place assembly, the LEDs are
packed in EIA-compliant tape and reel.
Features
 Available in Deep Red, Red, Red Orange, Amber, Green,
Blue, Royal Blue, Cool White, Neutral White and Warm
White
 Small footprint and low pro le
 Symmetrical outline
 Energy e cient
 Direct heat transfer from metal slug to mother board
 Compatible with re ow soldering process
 High current operation
 Long operation life
 Wide viewing angle
 Silicone encapsulation
 Non-ESD sensitive (threshold > 16kV)
 MSL 1 products
Applications
 Sign backlight
 Safety, exit and emergency sign lightings
 Specialty lighting such as task lighting and reading
lights
 Retail display
 Commercial lighting
 Accent or marker lightings, strip or step lightings
 Portable lightings, bicycle head lamp, torch lights.
 Decorative lighting
 Architectural lighting
 Pathway lighting
 Street lighting
 Pedestrian street lighting
 Tunnel lighting
 Horticulture
CAUTION: Customer is advised to keep the LEDs in the MBB when not in use as prolonged exposure to
environment might cause the silver plated leads to tarnish, which might cause di culties in soldering.
2
Package Dimensions
Notes:
1. All dimensions in millimeters.
2. Metal slug is connected to anode for electrically non-isolated option.
3. Tolerance is ±0.1 mm unless otherwise speci ed.
4. Terminal nish: Ag plating.
5. Corresponding NC (No Connection) leads adjacent to anode and cathode leads can be electrically short.
Figure 1. ASMT-Jx3x package outline drawing
5.0
4.0
4.0
0.7
1.0
0.3
1.85
Ø 3.7
0.8
0.65
0.60
Ø 1.70
Body Cathode Lead
Lens
Cathode Mark
Anode Lead NC
NC
NC
NC
Metal Slug
3
Part Numbering System
Note:
1. Please refer to Page 10 for selection details.
ASMT- J x1 3 x2 – x3 x4 x5 x6 x7
Packaging Option
Color Bin Selection
Maximum Flux Bin Selection
Minimum Flux Bin Selection
Dice Type
N – InGaN
A – AlInGaP
Heat Sink
0 – Electrically Non-isolated
1 – Electrically Isolated
Color
D – Deep Red
R – Red
H – Red Orange
A – Amber
G – Green
B – Blue
L – Royal Blue
W – Cool White
N – Neutral White
Y – Warm White
Device Selection Guide (TJ = 25°C)
Part Number Color
Luminous Flux (lm) /
Radiometric Power (mW), ΦV [1,2] Test Current
(mA)
Dice
Technology
Electrically
Isolated
Metal Slug Min. Typ. Max.
ASMT-JD30-ALN01 Deep Red 175mW 240mW 355mW 350 AllnGaP No
ASMT-JR30-AST01 Red 51.7 58.0 87.4 350 AllnGaP No
ASMT-JH30-ARS01 Red Orange 39.8 48.0 67.2 350 AllnGaP No
ASMT-JA30-ARS01 Amber 39.8 48.0 67.2 350 AllnGaP No
ASMT-JG31-NTU01 Green 67.2 78.0 99.6 350 InGaN Yes
ASMT-JB31-NMP01 Blue 13.9 20.0 30.6 350 InGaN Yes
ASMT-JB31-NNP01 18.1 25.0 30.6 350 InGaN Yes
ASMT-JL31-NPQ01 Royal Blue 355 mW 435 mW 515 mW 350 InGaN Yes
ASMT-JL31-NPR01 355 mW 450 mW 595 mW 350 InGaN Yes
ASMT-JW31-NTV01 Cool White 67.2 85.0 113.6 350 InGaN Yes
ASMT-JW31-NUV01 87.4 95.0 113.6 350 InGaN Yes
ASMT-JN31-NTV01 Neutral White 67.2 85.0 113.6 350 InGaN Yes
ASMT-JN31-NUV01 87.4 95.0 113.6 350 inGaN Yes
ASMT-JY31-NSU01 Warm White 51.7 70.0 99.6 350 InGaN Yes
Notes:
1. ΦV is the total luminous  ux / radiometric power output as measured with an integrating sphere at 25 ms mono pulse condition.
2. Flux tolerance is ±10%
4
Absolute Maximum Ratings
Parameter AllnGaP InGaN Units
DC Forward Current [1] 700 700 mA
Peak Pulsing Current 1500 2400 mA
Power Dissipation 1820 2730 mW
LED Junction Temperature 125 135 °C
Operating Metal Slug Temperature Range at 350 mA -40 to +115 -40 to +120 °C
Operating Metal Slug Temperature Range at 700 mA -40 to +100 -40 to +105 °C
Storage Temperature Range -40 to +120 -40 to + 120 °C
Soldering Temperature Refer to Figure. 25
Reverse Voltage [2] Not recommended
Note:
1. Derate linearly based on Figure 9 for AlInGaP and Figure 21 for InGaN.
2. Not designed for reverse bias operation.
Optical Characteristics at 350 mA (TJ = 25°C)
Part Number Color
Peak
Wavelength,
PEAK (nm)
Dominant
Wavelength,
D [1] (nm)
Viewing Angle,
2½ [2] (°)
Luminous E ciency
(lm/W)
Typ. Typ. Typ. Typ.
ASMT-JD30-ALN01 Deep Red 660 640 165 Not Applicable
ASMT-JR30-AST01 Red 635 625 165 79
ASMT-JH30-ARS01 Red Orange 625 615 165 65
ASMT-JA30-ARS01 Amber 598 590 165 65
ASMT-JG31-NTU01 Green 519 525 165 70
ASMT-JB31-NMP01 Blue 454 460 165 18
ASMT-JB31-NNP01 454 460 165 22
ASMT-JL31-NPQ01 Royal Blue 450 455 165 Not Applicable
ASMT-JL31-NPR01 450 455 165 Not Applicable
Part Number Color
Correlated Color Temperature,
CCT (Kelvin)
Viewing Angle,
2½ [2] (°)
Luminous E ciency
(lm/W)
Min. Max. Typ. Typ.
ASMT-JW31-NTV01 Cool White 4500 10000 140 76
ASMT-JW31-NUV01 4500 10000 140 85
ASMT-JN31-NTV01 Neutral White 3500 4500 140 76
ASMT-JN31-NUV01 3500 4500 140 85
ASMT-JY31-NSU01 Warm White 2700 3500 140 63
Notes:
1. The dominant wavelength, D, is derived from the CIE Chromaticity Diagram and represents the color of the device.
2. ½ is the o -axis angle where the luminous intensity is ½ the peak intensity.
5
Electrical Characteristic at 350 mA (TJ = 25°C)
Dice Type
Forward Voltage,
VF (Volts)
Thermal Resistance,
Rj-ms(°C/W) [1]
Min. Typ Max. Typ.
AllnGaP 1.7 2.1 2.3 9
InGaN 2.8 3.2 3.5 9
Note:
1. Rj-ms is Thermal Resistance from LED junction to metal slug.
Optical and Electrical Characteristic at 700 mA (TJ = 25°C)
Part Number Color
Luminous Flux (lm) /
Radiometric Power (mW), V
Forward Voltage,
VF (Volts)
Typ. Typ.
ASMT-JD30-ALN01 Deep Red 480mW 2.4
ASMT-JR30-AST01 Red 104.0 2.4
ASMT-JH30-ARS01 Red Orange 86.0 2.4
ASMT-JA30-ARS01 Amber 86.0 2.4
ASMT-JG31-NTU01 Green 125.0 3.6
ASMT-JB31-NMP01 Blue 34.0 3.6
ASMT-JB31-NNP01 43.0 3.6
ASMT-JL31-NPQ01 Royal Blue 740 mW 3.6
ASMT-JL31-NPR01 765 mW 3.6
ASMT-JW31-NTV01 Cool White 150.0 3.6
ASMT-JW31-NUV01 160.0 3.6
ASMT-JN31-NTV01 Neutral White 150.0 3.6
ASMT-JN31-NUV01 160.0 3.6
ASMT-JY31-NSU01 Warm White 120.0 3.6
6
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
520 535 550 565 580 595 610 625 640 655 670 685 700
WAVELENGTH - nm
RELATIVE INTENSITY
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
-90 -60 -30 0 30 60 90
ANGULAR DISPLACEMENT - DEGREES
NORMALIZED INTENSITY
0
50
100
150
200
250
300
350
400
450
500
550
600
650
700
0 0.5 1 1.5 2 2.5
FORWARD VOLTAGE - V
FORWARD CURRENT - mA
RED ORANGE
AMBER
RED
DEEP RED
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
0 100 200 300 400 500 600 700
RELATIVE LUMINOUS FLUX/
RADIOMETRIC POWER
(NORMALIZED AT 350 mA)
DC FORWARD CURRENT - mA
OTHERS
DEEP RED
Figure 2. Relative Intensity vs. Wavelength for Deep Red, Red, Red Orange
and Amber.
Figure 3. Relative Luminous Flux/ Radiometric Power vs. Mono Pulse Current.
AlInGaP
Figure 4. Forward Current vs. Forward Voltage. Figure 5. Radiation Pattern Deep Red, Red, Red Orange and Amber.
Figure 6. Maximum pulse current vs. ambient temperature.
Derated based on TA = 25°C, RJ-A = 30°C/W.
Figure 7. Maximum pulse current vs. ambient temperature.
Derated based on TA = 85°C, RJ-A = 30°C/W.
0.00
0.20
0.40
0.60
0.80
1.00
1.20
1.40
1.60
1.80
0.00001 0.0001 0.001 0.01 0.1 1 10 100
D =
0.05
0.10
0.25
0.50
1.00
0.00
0.20
0.40
0.60
0.80
1.00
1.20
1.40
1.60
1.80
0.00001 0.0001 0.001 0.01 0.1 1 10 100
D =
0.05
0.10
0.25
0.50
1.00
tp - PULSE DURATION - sec
Ip - PULSE CURRENT - A
D=tp
T
tp
IF
T
D=tp
T
tp
IF
T
tp - PULSE DURATION - sec
Ip - PULSE CURRENT - A
7
0
100
200
300
400
500
600
700
800
0 20 40 60 80 100 120 140
METAL SLUG TEMPERATURE, TMS - °C
MAX ALLOWABLE DC CURRENT - mA
RTJ-MS = 9°C/W
0
100
200
300
400
500
600
700
800
0 20 40 60 80 100 120 140
AMBIENT TEMPERATURE, TA - °C
MAX ALLOWABLE DC CURRENT - mA
RTJ-A = 20°C/W
RTJ-A = 25°C/W
RTJ-A = 30°C/W
0.0
20.0
40.0
60.0
80.0
100.0
120.0
140.0
160.0
180.0
200.0
220.0
240.0
-50 -25 0 25 50 75 100 125
JUNCTION TEMPERATURE,TJ - °C
RELATIVE LIGHT OUTPUT - %
(NORMALIZED AT 25°C)
-0.40
-0.20
0.00
0.20
0.40
0.60
0.80
1.00
-50 -25 0 25 50 75 100 125
JUNCTION TEMPERATURE,TJ - °C
FORWARD VOLTAGE SHIFT - V
(NORMALIZED AT 25°C)
AMBER
RED
RED-ORANGE
DEEP RED
AMBER
RED
RED ORANGE
DEEP RED
Figure 8. Relative Light Output vs. Junction Temperature. Figure 9. Forward Voltage Shift vs. Junction Temperature.
Figure 10. Maximum Forward Current vs. Ambient Temperature.
Derated based on TJMAX = 125°C, RJ-A = 20°C/W, 25°C/W and 30°C/W.
Figure 11. Maximum Forward Current vs. Ambient Temperature.
Derated based on TJMAX = 125°C, RJ-MS = 9°C/W.
8
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
380 430 480 530 580 630 680 730 780
WAVELENGTH - nm
RELATIVE INTENSITY
WARM WHITE
COOL WHITE
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
380 405 430 455 480 505 530 555 580 605 630
WAVELENGTH - nm
RELATIVE INTENSITY
GREEN
BLUE
ROYAL BLUE
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
0 100 200 300 400 500 600 700
MONO PULSE CURRENT - mA
RELATIVE LUMINOUS FLUX
(NORMALIZED AT 350 mA)
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
-90 -60 -30 0 30 60 90
ANGULAR DISPLACEMENT - DEGREES
NORMALIZED INTENSITY
0
50
100
150
200
250
300
350
400
450
500
550
600
650
700
0 0.5 1 1.5 2 2.5 3 3.5 4
FORWARD VOLTAGE - V
FORWARD CURRENT - mA
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
-90 -60 -30 0 30 60 90
ANGULAR DISPLACEMENT - DEGREES
NORMALIZED INTENSITY
GREEN
BLUE
InGaN
Figure 12. Relative Intensity vs. Wavelength for Cool and Warm White. Figure 13. Relative Intensity vs. Wavelength for Blue and Green.
Figure 14. Relative Luminous Flux vs. Mono Pulse Current. Figure 15. Forward Current vs. Forward Voltage.
Figure 16. Radiation Pattern for Blue and Green. Figure 17. Radiation Pattern for Cool White and Warm White.
9
0
100
200
300
400
500
600
700
800
0 20 40 60 80 100 120 140
AMBIENT TEMPERATURE
,
T
A
- °C
MAX ALLOWABLE DC CURRENT - mA
RTJ-A = 20°C/W
RTJ-A = 25°C/W
RTJ-A = 30°C/W
0
100
200
300
400
500
600
700
800
0 20 40 60 80 100 120 140
METAL SLUG TEMPERATURE
,
T
MS
- °C
MAX ALLOWABLE DC CURRENT - mA
RTJ-MS = 9°C/W
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
90.0
100.0
110.0
120.0
-50 -25 0 25 50 75 100 125 150
JUNCTION TEMPERATURE, TJ -°C
RELATIVE LIGHT OUTPUT - %
(NORMALIZED AT 25°C)
BLUE
ROYAL BLUE
GREEN
WHITE
-0.35
-0.30
-0.25
-0.20
-0.15
-0.10
-0.05
0.00
0.05
0.10
0.15
0.20
0.25
0.30
0.35
-50 -25 0 25 50 75 100 125 150
JUNCTION TEMPERATURE, TJ -°C
FORWARD VOLTAGE SHIFT - V
(NORMALIZED AT 25°C)
BLUE
ROYAL BLUE
WHITE
GREEN
Figure 20. Relative Light Output vs. Junction Temperature. Figure 21. Forward Voltage Shift vs. Junction Temperature.
Figure 22. Maximum Forward Current vs. Ambient Temperature.
Derated based on TJMAX = 135°C, RJ-A = 20°C/W, 25°C/W and 30°C/W
Figure 23. Maximum Forward Current vs. Metal Slug Temperature.
Derated based on TJMAX = 135°C, RJ-MS = 9°C/W
Figure 18. Maximum pulse current vs. ambient temperature.
Derated based on TA = 25°C, RJ-A = 30°C/W
Figure 19. Maximum pulse current vs. ambient temperature.
Derated based on TA = 85°C, RJ-A = 30°C/W
IP - PULSE CURRENT - A
tp - PULSE DURATION - sec
0.00
0.20
0.40
0.60
0.80
1.00
1.20
1.40
1.60
1.80
2.00
2.20
2.40
2.60
2.80
3.00
0.00001 0.0001 0.001 0.01 0.1 1 10 100
D =
0.05
0.10
0.25
0.50
1.00
0.00
0.20
0.40
0.60
0.80
1.00
1.20
1.40
1.60
1.80
2.00
2.20
2.40
2.60
2.80
3.00
0.00001 0.0001 0.001 0.01 0.1 1 10 100
D =
0.05
0.10
0.25
0.50
1.00
IP - PULSE CURRENT - A
tp - PULSE DURATION - sec
D=tp
T
tp
IF
T
D=tp
T
tp
IF
T
10
(Acc. to J-STD-020C)
217°C
200°C
60 - 120 SEC.
6°C/SEC. MAX.
3°C/SEC. MAX.
3°C/SEC. MAX.
150°C
255 - 260°C
100 SEC. MAX.
10 - 30 SEC.
TIME
TEMPERATURE
Figure 26. Recommended Re ow Soldering Pro le
Note: For detail information on re ow soldering of Avago surface mount
LEDs, do refer to Avago Application Note AN 1060 Surface Mounting
SMT LED Indicator Components.
Figure 24. Recommended soldering land pattern Figure 25. Recommended pick and place
nozzle tip. Inner diameter = 3.2 mm
Solder
Pad
Solder
Pad
Slug
Indepdent
0.80
0.85
1.75
1.32
ø1.90
3.50
5.20
∅3.2
11
Option Selection Details
ASMT-J x1 3 x2 – x3 x4 x5 x6 x7
x4 – Minimum Flux Bin Selection
x5 – Maximum Flux Bin Selection
x6 – Color Bin Selection
x7 – Packaging Option
Flux Bin Limit [x4, x5]
Color Bin ID
Luminous Flux (lm)/
Radiometric Power (mW)
at 350 mA
Min. Max.
Blue M 13.9 18.1
N 18.1 23.5
P 23.5 30.6
Q 30.6 39.8
Other Colors R 39.8 51.7
S 51.7 67.2
T 67.2 87.4
U 87.4 99.6
V 99.6 113.6
Deep Red
and
Royal Blue
L 175.0 225.0
M 225.0 275.0
N 275.0 355.0
P 355.0 435.0
Q 435.0 515.0
R 515.0 595.0
Tolerance for each bin limits is ±10%
Color Bin Selection (x6)
Individual reel will contain parts from one color bin selection only.
Warm White
Selection Bin ID
0 Full Distribution
E NM, MM, N1 and M1
F PM, NM, P1 and N1
G QM, PM, Q1 and P1
H M1, N1, M0 and N0
J P1, N1, P0 and N0
K Q1, P1, Q0 and P0
L N0, M0, NA and MA
M P0, N0, PA and NA
N Q0, P0, QA and PA
Other Colors
Selection Bin ID
0 Full Distribution
Z A and B
Y B and C
W C and D
V D and E
Q A, B and C
P B, C and D
N C, D and E
M D, E and F
Cool White
Selection Bin ID
0 Full Distribution
E VM, UM, VN and UN
F WM, VM, WN and VN
G XM, WM, XN and WN
H UN, VN, U0 and V0
J WN, VN, W0 and V0
K XN, WN, X0 and W0
L V0, U0, VP and UP
M W0, V0, WP, VP and WQ
N X0, W0, XP, WP and WQ
P Y0
Q YA
Neutral White
Selection Bin ID
0 Full Distribution
E SM, RM, S1 and R1
F TM, SM, TN and S1
G S1, R1, S0 and R0
H TN, S1, T0 and S0
J S0, R0, SA and RA
K T0, S0, TP and SA
12
Figure 29. Color bin structure for Neutral White
0.32
0.34
0.36
0.38
0.40
0.42
0.44
0.46
0.34 0.36 0.38 0.40 0.42 0.44
X-COORDINATE
Y-COORDINATE
RM
R1
R0
RA
T0
SM
S1
SA
TM
TN
TP
S0
4500K
BLACK BODY CURVE
4100K
3800K
3500K
0.26
0.28
0.30
0.32
0.34
0.36
0.38
0.40
0.42
0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40
X-COORDINATE
Y-COORDINATE
10000K
7000K
6300K
5000K
4500K
Y0
YA
UM
UN
UP
V0
VM
VN
VP
X0
XP
XM
XN W0
WQ
0.32
0.34
0.36
0.38
0.40
0.42
0.44
0.46
0.48
0.38 0.40 0.42 0.44 0.46 0.48 0.50
X-COORDINATE
Y-COORDINATE
QM
MM
NM
Q1
QA
P1
M0
M1
MA
NA
3050K 2850K
3500K 3250K
2700K
PM
Q0 P0
PA
BLACK BODY CURVE
N1
N0
U0
WM
WN
WP
5650K
BLACK BODY CURVE
Figure 27. Color bin Structure for Cool White Figure 28. Color bin structure for Warm White
13
Color Bin Limits
Cool
White
Color Limits
(Chromaticity Coordinates)
Bin UM x
y
0.365
0.386
0.367
0.400
0.348
0.385
0.347
0.372
Bin UN x
y
0.365
0.386
0.362
0.372
0.346
0.359
0.347
0.372
Bin U0 x
y
0.362
0.372
0.360
0.357
0.344
0.344
0.346
0.359
Bin UP x
y
0.360
0.357
0.357
0.342
0.343
0.331
0.344
0.344
Bin VM x
y
0.329
0.357
0.329
0.369
0.348
0.385
0.347
0.372
Bin VN x
y
0.329
0.345
0.329
0.357
0.347
0.372
0.346
0.359
Bin V0 x
y
0.329
0.331
0.329
0.345
0.346
0.359
0.344
0.344
Bin VP x
y
0.329
0.331
0.344
0.344
0.343
0.331
0.329
0.320
Bin WM x
y
0.329
0.369
0.329
0.357
0.315
0.344
0.314
0.355
Bin WN x
y
0.329
0.345
0.316
0.333
0.315
0.344
0.329
0.357
Bin W0 x
y
0.329
0.345
0.329
0.331
0.317
0.320
0.316
0.333
Bin WP x
y
0.329
0.331
0.329
0.320
0.318
0.310
0.317
0.320
Bin WQ x
y
0.329
0.320
0.329
0.310
0.319
0.300
0.318
0.310
Bin XM x
y
0.301
0.342
0.314
0.355
0.315
0.344
0.303
0.333
Bin XN x
y
0.305
0.322
0.303
0.333
0.315
0.344
0.316
0.333
Bin X0 x
y
0.308
0.311
0.305
0.322
0.316
0.333
0.317
0.320
Bin XP x
y
0.308
0.311
0.317
0.320
0.319
0.300
0.311
0.293
Bin YO x
y
0.308
0.311
0.283
0.284
0.274
0.301
0.303
0.333
Bin YA x
y
0.308
0.311
0.311
0.293
0.290
0.270
0.283
0.284
Tolerance: ±0.01
Warm
White
Color Limits
(Chromaticity Coordinates)
Bin MM x
y
0.471
0.451
0.460
0.430
0.473
0.432
0.486
0.455
Bin M1 x
y
0.460
0.430
0.453
0.416
0.467
0.419
0.473
0.432
Bin M0 x
y
0.453
0.416
0.444
0.399
0.459
0.403
0.467
0.419
Bin MA x
y
0.459
0.403
0.444
0.399
0.436
0.384
0.451
0.389
Bin NM x
y
0.454
0.446
0.444
0.426
0.460
0.430
0.471
0.451
Bin N1 x
y
0.444
0.426
0.438
0.412
0.453
0.416
0.460
0.430
Bin N0 x
y
0.438
0.412
0.429
0.394
0.444
0.399
0.453
0.416
Bin NA x
y
0.444
0.399
0.429
0.394
0.422
0.379
0.436
0.384
Bin PM x
y
0.438
0.440
0.430
0.421
0.444
0.426
0.454
0.446
Bin P1 x
y
0.430
0.421
0.424
0.407
0.438
0.412
0.444
0.426
Bin P0 x
y
0.424
0.407
0.416
0.389
0.429
0.394
0.438
0.412
Bin PA x
y
0.429
0.394
0.416
0.389
0.410
0.374
0.422
0.379
Bin QM x
y
0.421
0.433
0.414
0.414
0.430
0.421
0.438
0.440
Bin Q1 x
y
0.414
0.414
0.409
0.400
0.424
0.407
0.430
0.421
Bin Q0 x
y
0.409
0.400
0.402
0.382
0.416
0.389
0.424
0.407
Bin QA x
y
0.416
0.389
0.402
0.382
0.396
0.367
0.410
0.374
Tolerance: ±0.01
14
Neutral
White
Color Limits
(Chromaticity Coordinates)
Bin RM x
y
0.421
0.433
0.414
0.414
0.397
0.406
0.402
0.423
Bin R1 x
y
0.414
0.414
0.409
0.400
0.392
0.391
0.397
0.406
Bin R0 x
y
0.392
0.391
0.387
0.374
0.402
0.382
0.409
0.400
Bin RA x
y
0.387
0.374
0.383
0.360
0.396
0.367
0.402
0.382
Bin SM x
y
0.402
0.423
0.397
0.406
0.382
0.397
0.386
0.413
Bin S1 x
y
0.397
0.406
0.392
0.391
0.378
0.382
0.382
0.397
Bin S0 x
y
0.392
0.391
0.387
0.374
0.374
0.366
0.378
0.382
Bin SA x
y
0.387
0.374
0.383
0.360
0.370
0.351
0.374
0.366
Bin TM x
y
0.386
0.413
0.382
0.397
0.365
0.386
0.367
0.400
Bin TN x
y
0.382
0.397
0.378
0.382
0.362
0.372
0.365
0.386
Bin T0 x
y
0.378
0.382
0.374
0.366
0.360
0.357
0.362
0.372
Bin TP x
y
0.374
0.366
0.370
0.351
0.357
0.342
0.360
0.357
Tolerance: ±0.01
Example
ASMT-JG31-NST01
ASMT-JG31-Nxxxx – Green, InGaN, Electrically isolated
Heat Sink
X4 = S – Minimum Flux Bin S
X5 = T – Maximum Flux Bin T
X6 = 0 – Full Distribution
X7 = 1 – Tape and Reel Option
Packaging Option [x7]
Selection Option
1 Tape and Reel
Color Bin ID
Dominant Wavelength (nm)
at 350 mA
Min. Max.
Red – 620.0 635.0
Red Orange – 610.0 620.0
Amber B 587.0 589.5
C 589.5 592.0
D 592.0 594.5
E 594.5 597.0
Blue A 455.0 460.0
B 460.0 465.0
C 465.0 470.0
D 470.0 475.0
Green A 515.0 520.0
B 520.0 525.0
C 525.0 530.0
D 530.0 535.0
Tolerance: ±1 nm
Color Bin ID
Peak Wavelength (nm)
at 350 mA
Min. Max.
Deep Red - 650.0 670.0
Royal Blue C 440.0 445.0
D 445.0 450.0
E 450.0 455.0
F 455.0 460.0
Tolerance: ±2 nm
15
Tape and Reel – Option 1
Figure 30. Carrier Tape Dimensions
Notes:
1. Empty component pockets sealed with top cover tape.
2. 250 or 500 pieces per reel.
3. Drawing not to scale.
4. All dimensions are in millimeters.
Figure 31. Reel dimensions
178 ±1
4 ±0.5 5 ±0.5
3 ±0.5 ø21.0 ±0.5
ø10 ø13.1 ±0.5
ø60 ±0.5
13.2 ±.5
16.0 ±.5
4.00 ±.10
8.00 ±.10
12.00 +.30
.10
4.15 ±.10 0.25 ±0.02
2.05 ±.10
8° ø1.5 ±0.25
2.00 ±.05
5.50 ±.05
1.75 ±0.01
0.25 ±0.02
2.01 ±0.1
ø1.5 ±0.1
5°
5.25 ±.10
DISCLAIMER: Avago’s products and software are not speci cally designed, manufactured or authorized for sale
as parts, components or assemblies for the planning, construction, maintenance or direct operation of a nuclear
facility or for use in medical devices or applications. Customer is solely responsible, and waives all rights to
make claims against avago or its suppliers, for all loss, damage, expense or liability in connection with such use.
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved.
AV02-1941EN - May 16, 2012
CATHODE SIDE
USER FEED DIRECTION
PRINTED LABEL
Figure 32. Reeling Orientation