DIL SOCKETS SERIES 110 110-PP-320-41-001101 2.54 mm, Solder tail Open frame standard low profile DIL Sockets TECHNICAL SPECS.: Insulator Black glass filled polyester PCT-GF30-FR Flammability UL 94V-O Sleeve Brass CuZn36Pb3 (C36000) Contact Clip (4 finger): Beryllium copper (C17200) Accepted pin O 0.40 to 0.56 mm Insertion Forces 2 N typ. Withdrawal Forces 1 N typ. (polished steel gauge O 0.43 mm) Mechanical life Min. 100 cycles Rated current 1A Contact resistance Max. 10 m Dielectric strength Min. 1000 V RMS ORDERING INFORMATION: PP Plating code Sleeve Clip 87 Tin Gold flash 83 Tin Gold 0.75 m ADVANCED INFORMATION: Order Codes Poles A B C 110-PP-210-41-001101 10 12.6 5.08 7.6 110-PP-304-41-001101 4 5.0 7.62 10.1 110-PP-306-41-001101 6 7.6 7.62 10.1 110-PP-308-41-001101 8 10.1 7.62 10.1 PHONE D E PRECI-DIP SA Rue Saint-Henri 11 P.P.Box 834 CH-2800 Delemont / Switzerland +41 (0)32 421 04 00 FAX +41 (0)32 421 04 01 E-MAIL sales@precidip.com www.precidip.com See 110-PP-310-41-001101 10 12.6 7.62 10.1 110-PP-312-41-001101 12 15.2 7.62 10.1 110-PP-314-41-001101 14 17.7 7.62 10.1 110-PP-316-41-001101 16 20.3 7.62 10.1 110-PP-318-41-001101 18* 22.8 7.62 10.1 110-PP-320-41-001101 20* 25.3 7.62 10.1 110-PP-322-41-001101 22* 27.8 7.62 10.1 110-PP-324-41-001101 24* 30.4 7.62 10.1 110-PP-328-41-001101 28 35.5 7.62 10.1 110-PP-420-41-001101 20 25.4 10.16 12.6 110-PP-422-41-001101 22 27.8 10.16 12.6 110-PP-424-41-001101 24 30.4 10.16 12.6 110-PP-428-41-001101 28 35.5 10.16 12.6 110-PP-432-41-001101 32 40.6 10.16 12.6 110-PP-610-41-001101 10 12.7 15.24 17.7 110-PP-624-41-001101 24* 30.5 15.24 17.7 110-PP-628-41-001101 28* 35.5 15.24 17.7 110-PP-632-41-001101 32* 40.6 15.24 17.7 110-PP-636-41-001101 36 45.7 15.24 17.7 110-PP-640-41-001101 40* 50.8 15.24 17.7 110-PP-642-41-001101 42 53.3 15.24 17.7 110-PP-648-41-001101 48* 60.9 15.24 17.7 110-PP-650-41-001101 50 63.5 15.24 17.7 110-PP-652-41-001101 52 66.0 15.24 17.7 110-PP-950-41-001101 50 63.5 22.86 25.3 110-PP-952-41-001101 52 66.0 22.86 25.3 110-PP-964-41-001101 64 81.2 22.86 25.3 PHONE PRECI-DIP SA Rue Saint-Henri 11 P.P.Box 834 CH-2800 Delemont / Switzerland +41 (0)32 421 04 00 FAX +41 (0)32 421 04 01 E-MAIL sales@precidip.com www.precidip.com TECHNICAL ASSISTANCE GENERAL SPECIFICATIONS: The values listed below are general specs applying for PRECI-DIP DIL sockets. Please see individual catalog page for additional and product specific technical data. Operating temperature range -55 ... +125 C Climatic category (IEC) 55/125/21 Operating humidity range annual mean 75 % Max working voltage 100 VRMS/150 VDC PRECI-DIP sockets are recognized by Underwriters Laboratories Inc. and listed under "Connectors for Use in Data, Signal, Control and Power Applications", File Nr. E174442. MECHANICAL CHARACTERISTICS: Clip retention Min. 40 N (no displacement under axial force applied) Contact (sleeve / clip) retention Min. 3.3 N acc. to MIL-DTL-83734, pt 4.6.4.2 ELECTRICAL CHARACTERISTICS: Insulation resistance between any two adjacent contacts Min. 10'000 M at 500 V AC Capacitance between any two adjacent contacts Max. 1 pF Air and creepage distances between any two adjacent contacts Min. 0.6 mm (Min. 0.2 mm FOR SHRINK-DIP SOCKETS) ENVIRONMENTAL CHARACTERISTICS: The sockets withstand the following environmental tests without mechanical and electrical defects: - Dry heat steady state IEC 60512-11-9.11i / 60068-2-2.Bb: 125 C, 16h - Damp heat cyclic IEC 60512-11-12.11m / 60068-2-30.Db: 25/55 C, 90 - 100 %rH, 1 cycle of 24 h - Cold steady state IEC 60512-11-10.11j / 60068-2-1.A: -55 C, 2 h - Thermal shock IEC 60512-11-4.11d / 60068-2-14.Na: -55/125 C, 5 cycles 30 min - Sinusoidal vibrations IEC 60512-6-4.6d / 60068-2-6.Fc: 10 to 500 Hz, 10 g, 1 octave/min, 10 cycles for each axis - Shock IEC 60512-6-3.6c / 60068-2-27.Ea: 50 g, 11 ms, 3 shocks in three axis During the above two tests no contact interruption >50 ns does appear. - Solderability J-STD-002A, Test A, 245C, 5 s solder alloy SnAg3.8Cu0.7 - Resistance to soldering heat J-STD-0020C, 260C, 20 s - Moisture sensitivity J-STD-020C level 1 - Resistance to corrosion : 1) Salt spray test IEC 60068-2-11.Ka: 48 h 2) Sulfur dioxide (SO2) test IEC 60068-2-42 Kc: 96 h at 25 ppm SO2, 25 C, 75 %rH 3) Hydrogen sulfide (H2S) test IEC 60068-2-43 Kd: 96 h at 12 ppm H2S, 25 C, 75 %rH SOLDERLESS COMPLIANT PRESS-FIT CHARACTERISTICS: PRESS-FIT CHARACTERISTICS MEASURED ACC. TO IEC 60352-5 - Press-in force: 90 N max. (at min. hole dia.) / 65 N typ. - Push-out force: 30 N min. (at max. hole dia.) / 50 N typ. - Push-out 3rd cycle: 20 N min. (at max. hole dia.) PCB HOLE DIMENSIONS - 2.54 mm grid: Finished hole O: 1 + 0.09/-0.06 mm | Drilled hole O: 1.15 0.02 mm PHONE PRECI-DIP SA Rue Saint-Henri 11 P.P.Box 834 CH-2800 Delemont / Switzerland +41 (0)32 421 04 00 FAX +41 (0)32 421 04 01 E-MAIL sales@precidip.com www.precidip.com PCB HOLE PLATING - PCB surface finish: Hole plating - Tin: 5-15 m tin over min. 25 m copper - Copper: min. 25 m copper - Gold over nickel: 0.05-0.2 m gold over 2.5-5 m nickel over min. 25 m copper PHONE PRECI-DIP SA Rue Saint-Henri 11 P.P.Box 834 CH-2800 Delemont / Switzerland +41 (0)32 421 04 00 FAX +41 (0)32 421 04 01 E-MAIL sales@precidip.com www.precidip.com