DESCRIPTION
The HPR10XXC Series uses advanced circuit design and packaging technology to deliver superior reliability and
performance. A 170kHz push-pull oscillator is used in the input stage. Beat-frequency oscillation problems are
reduced when using the HPR10XXC Series with high frequency isolation amplifi ers.
Reduced parts count and high effi ciency add to the reliability of the HPR10XXC Series. The high effi ciency of the
HPR10XXC Series means less internal power dissipation, as low as 190mW. With reduced heat dissipation the
HPR10XXC Series can operate at higher temperatures with no degradation. In addition, the high effi ciency of the
HPR10XXC Series means the series is able to offer greater than 13 W/inch3 of output power density. Operation
down to no load will not impact the reliability of the series, although a 1mA minimum load is needed to realize
published specifi cations.
The HPR10XXC Series provides the user low cost without sacrifi cing reliability. The use of surface mounted devices
and advanced manufacturing technologies make it possible to offer premium performance and low cost.
NOT RECOMMENDED FOR NEW DESIGNS
See page Electrical Specifi cations
for alternatives
FEATURES
■ RoHS Compliant
■
Low Cost
■ Single-in-line Package (SIP)
■ Internal input and output fi ltering
■
Non-Conductive Case
■
High Output Power Density:
13 Watts/Inch3
■ Extended Temperature Range:
-25°C to +65°C
■ Effi ciency to 72% (Typical)
Model
Nominal Input
Voltage
Rated Output
Voltage
Rated Output
Current
Input Current Refl ected
Ripple Current Effi ciency Recommended Alternatives
No Load Rated Load
VDC VDC mA mA mAp-p %
NOT RECOMMENDED FOR
NEW DESIGNS
HPR1000C 5 5 200 33 290 8 68 NMR100C / MER1S0505SC
HPR1001C 5 12 83 33 290 8 69 NMR101C / MER1S0512SC
HPR1004C 5 ±12 ±42 33 285 8 70 NMA0512SC / MEA1D0512SC
HPR1005C 5 ±15 ±34 33 285 8 70 NMA0515SC / MEA1D0515SC
HPR1018C 24 5 200 12 60 15 71 MER1S2405SC
HPR1022C 24 ±12 ±42 12 58 15 72 MEA1D2412SC
HPR1023C 24 ±15 ±34 12 58 15 72 MEA1D2415SC
OBSOLETE
HPR1002C 5 15 67 33 285 8 70 NMR102C / MER1S0515SC
HPR1003C 5 ±5 ±100 33 285 8 70 NMA0505SC / MEA1D0505SC
HPR1006C 12 5 200 18 110 10 70 NMR106C / MER1S1205SC
HPR1007C 12 12 83 18 107 10 71 NMR107C / MER1S1212SC
HPR1008C 12 15 67 18 107 10 71 NMR108C / MER1S1215SC
HPR1009C 12 ±5 ±100 18 107 10 71 NMA1205SC / MEA1D1205SC
HPR1010C 12 ±12 ±42 18 107 10 71 NMA1212SC / MEA1D1212SC
HPR1011C 12 ±15 ±34 18 107 10 71 NMA1215SC / MEA1D1215SC
HPR1012C 15 5 200 15 96 10 70 MER1S1505SC
HPR1013C 15 12 83 15 94 10 70 MER1S1512SC
HPR1014C 15 15 67 15 94 10 71 MER1S1515SC
HPR1015C MEA1D1505SC
HPR1016C 15 ±12 ±42 15 94 10 71 MEA1D1512SC
HPR1017C 15 ±15 ±34 15 94 10 71 MEA1D1515SC
HPR1019C 24 12 83 12 60 15 71 MER1S2412SC
HPR1020C 24 15 67 12 58 15 72 MER1S2415SC
HPR1021C 24 ±5 ±100 12 58 15 72 MEA1D2405SC
Specifi cations typical at T
A = +25°C, nominal input voltage, rated output current unless otherwise specifi ed.
ELECTRICAL SPECIFICATIONS
Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000
HPR10XXC
1.0 WATT UNREGULATED, SIP DC/DC CONVERTER
2010-10-06 TDC_HPR10XXC.D01 Page 1 of 4
www.murata-ps.com
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com
COMMON SPECIFICATIONS
Specifi cations typical at T
A = +25°C, nominal input voltage, rated output current unless otherwise specifi ed.
* For demonstrated MTTF results reference Reliability Report HPR105
PARAMETER CONDITIONS MIN TYP MAX UNITS
INPUT
Voltage Range 4.5 5 5.5 VDC
10.8 12 13.2 VDC
13.5 15 16.5 VDC
21.6 24 26.4 VDC
Voltage Rise Time See Typical Performance Curves & Application Notes: "Capacitive Loading Effects on Start-Up of DC/DC Converters"
ISOLATION
Rated Voltage 1000 VDC
Test Voltage 60 Hz, 10 Seconds 1000 Vpk
Resistance 10 GΩ
Capacitance 25 100 pF
Leakage Current VISO= 240VAC, 60Hz 2 8.5 µArms
OUTPUT
Rated Power 1.0 W
Voltage Setpoint Accuracy Rated Load, Nominal VIN ±5 %
Ripple & Noise BW = DC to 10MHz 100 mVp-p
BW =10Hz to 2MHz 30 mVrms
Voltage 1mA Load, VOUT = 5V 7 VDC
1mA Load, VOUT = 12V 15 VDC
1mA Load, VOUT = 15V 18 VDC
Temperature Coeffi cent .01 %/Deg C
REGULATION
Line Regulation High Line to Low Line 1 %/%Vin
Load Regulation (5V out only) Rated Load to 1mA Load 10 %
Load Regulation (All other Models) Rated Load to 1mA Load 3 %
GENERAL
Switching Frequency 170 kHz
Frequency Change Over Line and Load 24 %
Package Weight 2 g
MTTF per MIL-HDBK-217, Rev. E Circuit Stress Method
Ground Benign T
A = +25°C 3.8 MHr
Fixed Ground T
A = +35°C 1.4 MHr
Naval Sheltered T
A = +35°C 685 kHr
Airborne Uninhabited Fighter T
A = +35°C 211 kHr
TEMPERATURE
Specifi cation -25 +25 +65 °C
Storage -50 +110 °C
Notes: All dimensions are in inches (millimeters).
GRID: 0.100 inches (2.54 millimeters)
PIN PLACEMENT TOLERANCE: ± 0.015"
MATERIAL: Lead material is phosphor bronze; fi nish is
100-300 micro-inches of matte tin over a barrier layer of
5-40 micro-inches of nickel.
FRONT
VIEW
BOTTOM
VIEW
* Common pin not present on single output models.
PIN CONNECTIONS
1. +VIN 2. -VIN
4. -VOUT 5. COM*
6. +VOUT
RIGHT
SIDE
VIEW
MECHANICAL
HPR10XXC
Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000
HPR10XXC
1.0 WATT UNREGULATED, SIP DC/DC CONVERTER
2010-10-06 TDC_HPR10XXC.D01 Page 2 of 4
www.murata-ps.com
VOUT VS LOAD
(5Vout Models) VOUT VS LOAD
(±5Vout Models) VOUT VS LOAD
(12Vout Models)
VOUT VS LOAD
(±12Vout Models) VOUT VS LOAD
(15Vout Models) VOUT VS LOAD
(±15Vout Models)
0 40 120 160
5.3
5.5
5.7
4.9
5.1
020406080
11.9
12.0
12.1
12.2
12.3
12.4
020406080
4.6
4.8
5.0
5.2
5.4
010203040
12.0
12.1
12.2
12.3
12.4
12.5
14.9
15.1
15.3
15.5
15.7
15.9
020406080 0
13.5
14.0
14.5
15.0
15.5
16.0
Vout
Vout
Vout
Vout
Vout
Vout
Efficiency (%)
80
Output Current (mA) Output Current each load (mA) Output Current each load (mA)
12.5
Output Current each load (mA)
12.6
Output Current each load (mA) Output Power each load (Watts)
0.2 0.4 0.6 0.8 1.0
16.5
040 80 100
60
20
90
75
60
45
30
15
0
EFFICIENCY VS LOAD
% of Rated Load (%)
Efficiency (%)
OSCILLATION FREQUENCY VS
TEMPERATURE
220
200
180
160
140
-30 0 30 60 90
Temperature (°C)
TYPICAL PERFORMANCE CURVES
Specifi cations typical at T
A = +25°C, nominal input voltage, rated output current unless otherwise specifi ed.
These devices are intended for wave soldering or manual soldering.
They are not intended to be subject to surface mount processes under any circumstances.
The normal wave soldering process can be used with these devices where the device is subjected
to a maximum wave temperature of 260°C for a period of no more than 10 seconds. Within this
time and temperature range, the integrity of the device’s plastic body will not be compromised and
internal temperatures within the converter will not exceed 175°C. Care should be taken to control
manual soldering limits identical to that of wave soldering.
THROUGH-HOLE SOLDERING INFORMATION
Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000
HPR10XXC
1.0 WATT UNREGULATED, SIP DC/DC CONVERTER
2010-10-06 TDC_HPR10XXC.D01 Page 3 of 4
www.murata-ps.com
ORDERING INFORMATION
Device Family
HPR Indicates DC/DC Converter
Model Number
Selected from Table of Electrical Characteristics
RoHS Compliance
HPR 10XX C
ABSOLUTE MAXIMUM RATINGS
Internal Power Dissipation.....................................................490mW
Short Circuit Duration......................................................Momentary
SAFE OPERATING AREA
Rise Time of Input Voltage (mS)
LOAD CAPACITANCE vs INPUT RISE TIME
(5 Vout models)
Total Load Capacitance (uF)
0 5 10 15 20 25 30 35 40 45 50
600
500
400
300
200
100
0
SAFE OPERATING AREA
Rise Time of Input Voltage (mS)
LOAD CAPACITANCE vs INPUT RISE TIME
(12 Vout models)
Total Load Capacitance (uF)
0 5 10 15 20 25 30 35 40 45 50
90
80
70
60
50
40
30
20
10
0
SAFE OPERATING AREA
Rise Time of Input Voltage (mS)
LOAD CAPACITANCE vs INPUT RISE TIME
(15 Vout models)
Total Load Capacitance (uF)
0 5 10 15 20 25 30 35 40 45 50
60
50
40
30
20
10
0
SAFE OPERATING AREA
NOTES:
1. When operated within the SAFE OPERATING AREA as defi ned
by the above curves, the output voltage of Hpr10xxC devices is
guaranteed to be within 95% of its steady-state value within 100
milliseconds after the input voltage has reached 95% of its steady-
state value.
2. For dual output models, total load capacitance is the sum of the
capacitances on the plus and minus outputs.
Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000
HPR10XXC
1.0 WATT UNREGULATED, SIP DC/DC CONVERTER
2010-10-06 TDC_HPR10XXC.D01 Page 4 of 4
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifi cations are subject to change without
notice. © 2010 Murata Power Solutions, Inc.
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfi eld, MA 02048-1151 U.S.A.
ISO 9001 and 14001 REGISTERED
www.murata-ps.com/locations
