D-Sub DIN 41 652 * CECC 75 301-802 * IEC 60 807 Number of contacts Mounting height Sta nda rd V ers 9--37 50 ion Stamped solder pins, angled with grounding board locks No. of contacts Identification Performance levels Explanations see page 05.04 Other performance levels on request Part No. Performance level Performance level 3 2 Male connector D-Sub metal shell with dimples 2.84 mm pitch 9 15 25 37 09 65 163 781 09 65 263 781 09 65 363 781 09 65 463 781 2.84 mm pitch . . . . 1) 1) 1) 1) 2.54 mm pitch 9 15 25 37 09 65 162 781 09 65 262 781 09 65 362 781 09 65 462 781 09 65 163 681 09 65 263 681 09 65 363 681 09 65 463 681 . . . . 1) 1) 1) 1) 2.54 mm pitch . . . . 09 65 162 681 09 65 262 681 09 65 362 681 09 65 462 681 . . . . Female connector metal shell 2.84 mm pitch 9 15 25 37 50 09 66 153 761 09 66 253 761 09 66 353 761 09 66 453 761 09 66 553 761 2.84 mm pitch . . . . . 1) 1) 1) 1) 1) 2.54 mm pitch 9 15 25 37 50 Please insert digit for flange thread or fitted female screw locks O 3.1 mm hole M3 4-40 UNC fitted screw locks 4-40 UNC 05 14 1) Not normally kept in stock 1)01) 1 2 3 09 66 152 761 09 66 252 761 09 66 352 761 09 66 452 761 09 66 552 761 09 66 153 661 09 66 253 661 09 66 353 661 09 66 453 661 09 66 553 661 . . . . . 1) 1) 1) 1) 1) 2.54 mm pitch . . . . . 1) 09 66 152 661 09 66 252 661 09 66 352 661 09 66 452 661 09 66 552 661 . . . . . 1) s D-Sub DIN 41 652 * CECC 75 301-802 * IEC 60 807 Number of contacts Mounting height Sta nda rd V ers 9--37 50 ion s Stamped solder pins, angled with grounding board locks Identification Drawing Dimensions in mm Male connector Mating face acc. to: DIN 41 652 * CECC 75 301-802 IEC 60 807 X No. 1 contact fitted screw locks 4 - 40 UNC D-Sub Nut thread M3 or 4 - 40 UNC 9-37 Female connector 50 Mating face acc. to: DIN 41 652 * CECC 75 301-802 IEC 60 807 No. 1 contact X 9-37 Grounding board lock 0.2 x 0.6 X 50 9-37 Board drillings a b0.1 50 c f 9 30.90 25.00 12.50 2.74 15 39.20 33.30 12.50 2.74 25 53.10 47.00 12.50 2.76 37 69.40 63.50 12.50 2.76 50 67.00 61.10 15.40 2.76 05 15 Mating conditions see page 05.04 Mounting details see page 05.24