Electric Double Layer Capacitors (Gold Capacitor)/ RF/RG Stacked Coin Type Series: RF/RG Features Endurance: 85 C 2000 h Can be discharged mA current RoHS directive compliant Recommended Applications GAS, Water, watt-hour meter (LCD indicate, valve) Server Specifications Series Category temp. range Maximum operating voltage Nominal capacitance Capacitance tolerance RG RF -25 C to +85 C 3.6 V DC 3.6 V DC 5.5 V DC 1.0 F 0.68 F 0.68 F -20 % to +80% Lower category temp. (-25 C) Upper category temp. (+85 C) Stability at low and high Capacitance change 30 % of initial measured value at 20 C 30 % of initial measured value at 20 C temperature Internal resistance <4 times of initial specified value. <4 times of initial specified value. After 2000 hours application of maximum operating voltage at +85 C Endurance Capacitance change 30 % of initial measured value at 20 C 30 % of initial measured value at 20 C 30 % of initial measured value at 20 C Internal resistance 40 or less 30 or less 40 or less After 2000 hours storage at +85 C without load (voltage) Shelf life Capacitance change Capacitance change shall meet the specified limits for Endurance Internal resistance Internal resistance shall meet the specified limits for Endurance Dimensions in mm(not to scale) RG series Terminal : V RF series Terminal : H 1.20.1 3.50.3 6.00.5 - 1.00.1 + 5.00.5 0.200.05 20.00.5 0.20.05 0.80.1 1.00.1 9.5 max. 61 5.0 - - 19.00.3 20.00.5 + 5.00.3 20.50.5 4.00.3 Sleeve 2.50.5 3.50.5 61 5.00.3 Sleeve 21.5 max. 5.00.5 0.50.1 19.00.3 1.10.05 (Recommended) + Standard Products Series RG RF Maximum Recommended Internal operating Capacitance resistance discharge Case voltage current (V DC) (F) () at 1 kHz (mA) Parts number Mass Min. packaging Qty. 1 Tray (g) (pcs) 3.6 1.0 <20 20 or less A EECRG0V105() 4.1 100 3.6 0.68 <20 25 or less B EECRF0V684 10 100 5.5 0.68 <20 20 or less B EECRF0H684 10 100 Do not use reflow sp;dering.(IR, Atmospherheating methods, etc.) Please refer to P197 "Mounting Specifications". ( ): Please use V or H to indicate terminal type. The recommended discharge current is a reference value. Please design your equipment(circuit) in consideration of IR dorop. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Jun. 2008