4 RELEASED FOR PUBLICATION THIS DRAWING IS UNPUBLISHED. C COPYRIGHT BY TYCO ELECTRONICS CORPORATION. 20 2 3 1 20 LOC REVISIONS DIST ES ALL RIGHTS RESERVED. 00 P LTR A B 14.15 D DESCRIPTION DATE DWN APVD INITIAL RELEASED PER ECR-11-002073 9FEB2011 A.L S.Y OBSOLETE PER ECR-18-009100 15JUN2018 T.Z S.L 35.9 D 4.5 14.15 11.75 11.2 10.4 12 3 REF 8.65 3.7 C C 1.85 2.37 5.2 15.95 REF AFTER ORGANIZER AND SHELL ASSEMBLY B 22.15 4.45 BEFORE SHELL ASSEMBLY CABLE ASSEMBLY SOLDER POINT 0.6 MAX B NOTE: 1. MATERIAL: SHELL : CARBON STEEL CONTACTS: COPPER ALLOY HOUSING: THERMOPLASTIC, BLUE 2. PLATING: CONTACT: 0.76um MIN GOLD OR GOLD FLASHED OVER 0.76um MIN Pd-Ni ON MATING AREA,2.54um MIN MATTE TIN ON SOLDER TAILS, 1.27um MIN NICKEL UNDER PLATING SHELL: NICKEL PLATING OVER COPPER PLATING 3. RECOMMENDED CABLE ASSEMBLY PROCESS: WIRE SOLDERING------>ENVELOPING GLUE AROUND SOLDER POINT ------>OVERMOLDING INNER PLASTIC------>OVER MOLDING OUTER PLASTIC THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. A TOLERANCES UNLESS OTHERWISE SPECIFIED: DIMENSIONS: mm CONTACT CABLE ASSEMBLY SOLDER REQUIREMENT TO AVOID SHORT ISSUE AMP 1471-9 REV 31MAR2000 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES MATERIAL FINISH - 0.25 0.25 0.25 DWN 18AUG2009 CHK 18AUG2009 APVD 18AUG2009 ALAN LIU MARTIN LI STEVEN YAO P/N: 1932266-1 Tyco Electronics PRODUCT SPEC - APPLICATION SPEC - WEIGHT SIZE - - CUSTOMER DRAWING A Shanghai P.R.China 200233 NAME USB 3.0 TYPE A STD PLUG - CAGE CODE A2 00779 RESTRICTED TO DRAWING NO 1932266 SCALE 2:1 SHEET 1 OF 1 REV B