Features * * * * Material Substrate: Alumina Resistor: Thick Film Coating: glass overcoat Terminal: 100% nickel barrier inner layer with 100% matte tin outer layer High Voltage Ratings Smaller Package Sizes Low Cost Wraparound Terminals Specifications Prefered Number Series for Resistors: 1%, 2%: E96, E24 5%, 10%: E24 Electrical Tolerance: 1-10% Derating: Linearly from 100% at 70C to 0% at 125C Isolation Voltage: 500V (ex. MMC06: 100V) Oper. Temp. Range: -55~+125 Mini Macro Chip Series High Voltage Thick Film SMD Chip L W A t B Series Power (SizeResistance TCR Rating (W) Voltage Isolation Dimensions (in./mm) in./met.)Range 10-6/C @70C Rating* Voltage L W t A MMC06 470~10M 100 0.1 200 100 0.063 .004 0.031 .006 0.018 .004 0.012 .004 (0603/1608) 47~464 200 1.6 0.1 0.8 0.15 0.45 0.1 0.3 0.1 MMC08 100~10M 1% & 2% 100 0.125 300 500 0.079 .004 0.049 .004 0.022 .004 0.016 .008 (0805/2012) 100~51M 5% & 10% 2.0 0.1 1.25 0.10 0.55 0.1 0.4 0.2 47~97.6 200 MMC12 100~10M 1% & 2% 100 0.25 400 500 0.126 .004 0.063 .006 0.022 .004 0.020 .01 (1206/3216) 100~51M 5% & 10% 3.2 0.1 1.6 0.15 0.55 0.1 0.5 0.25 47~97.6 200 MMC25 560~20M 1% & 2% 100 1.0 800 500 0.248 .004 0.126 .006 0.022 .004 0.024 .008 (2512/6332) 560~51M 5% & 10% 6.3 0.1 3.2 0.15 0.55 0.1 0.6 0.2 100~549 200 47~97.6 500~-200 *Use Ohm's Law (V= P*R) to calculate maximum working voltage. Note: Limiting Element Voltage can only be applied to resistors when the resistance is equal to or higher than the critical resistance value. D ERA T IN G 0.020 .01 0.5 0.25 5000 0.024 .008 4000 0.6 0.2 o r d e r i n g i n f o r m at i o n RoHS Compliant 100 Percent Rated Power Qty./ BReel 0.012 .004 5000 0.3 0.1 0.016 .008 5000 0.4 0.2 M M C 1 2 J 4 7 0 4 E T P 80 Type 60 40 20 25 50 70 75 100 Ambient Temperature, C Tolerance F = 1% G = 2% J = 5% K = 10% Resistance Packaging First 3 digits are TP = Paper tape significant; 4th digit (use on MMC06, is multiplier (# of MMC08, MMC12) zeroes to follow). TR = Embossed tape Examples: (use on MMC25) 4704 = 4,700,000 1214 = 1,210,000 Use E96 values for 1% Use E24 values for 5% Note: Units are marked with 3-digit (E24 Series) or 4-digit (E96 Series). 4-digit marking not available on MMC06 sizes. 0 0 Wattage 06 = 0.1 08 = 0.125 12 = 0.25 25 = 1.0 125 l a n d Pat t e r n ( i n . ) Land pattern dimensions are for reference only N O Ohmite Mfg. Co. M L Size MMC06 MMC08 MMC12 MMC25 M 0.075 0.095 0.146 0.272 N 0.024 0.032 0.040 0.048 O 0.041 0.069 0.080 0.150 L 0.027 0.031 0.066 0.176 1-866-9-OHMITE * Int'l 1-847-258-0300 * Fax 1-847-574-7522 * www.ohmite.com * info@ohmite.com 5