SKY13317-373LF-EVB - SKYWORKS SOLUTIONS

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200914K • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 13, 2014 1

DATA SHEET

SKY13317-373LF: 20 MHz to 6.0 GHz pHEMT GaAs SP3T

Switch

Applications

 802.11 a/b/g/n WLAN networks

 Bluetooth® systems

Features

 Positive low voltage control: 0/1.8 to 5.0 V

 Low insertion loss: 0.5 dB @ 2.5 GHz, 0.9 dB @ 6 GHz

 High isolation: 25 dB up to 6 GHz

 Excellent linearity performance: P1dB = +29 dBm

 Miniature, ultra-thin MLP (8-pin, 1.5 x 1.5 mm) package (MSL1,

260 C per JEDEC J-STD-020)

Skyworks Green™ products are compliant with

all applicable legislation and are halogen-free.

For additional information, refer to Skyworks

Deﬁnition of Green™, document number

SQ04-0074.

RF1

N/C

RFC

RF2

RF3

S1868a

Figure 2. SKY13317-373LF Pinout – 8-Pin MLP

(Top View)

RFC RF2

RF3 V3

V1 RF1

Y1481

Figure 1. SKY13317-373LF Block Diagram

Description

The SKY13317-373LF is a GaAs pHEMT single-pole, triple-throw

(SP3T) antenna switch that operates in the 20 MHz to 6.0 GHz

frequency range. Switching between the antenna (RFC signal) and

the RF1, RF2, and RF3 ports is accomplished with three control

voltages.

The low loss, high isolation, high linearity, small size, and low

cost make this switch ideal for all WLAN and Bluetooth systems

operating in the 2.4 to 2.5 GHz and 4.9 to 5.9 GHz bands.

The SKY13317-373LF is manufactured in a compact, 1.5 x

1.5 mm, 8-pin Micro Leadframe (MLP) package. A functional

block diagram is shown in Figure 1. The pin configuration and

package are shown in Figure 2. Signal pin assignments and

functional pin descriptions are provided in Table 1.

DATA SHEET • SKY13317-373LF: SP3T SWITCH

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

2 October 13, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200914K

Table 1. SKY13317-373LF Signal Descriptions

Pin Name Description Pin Name Description

1 RFC Antenna. DC blocking capacitor required. 5 RF2 RF port 2. DC blocking capacitor required.

2 N/C No connect 6 V2 Switch logic control (see Table 4)

3 V1 Switch logic control (see Table 4) 7 V3 Switch logic control (see Table 4)

4 RF1 RF port 1. DC blocking capacitor required. 8 RF3 RF port 3. DC blocking capacitor required.

Table 2. SKY13317-373LF Absolute Maximum Ratings (Note 1)

Parameter Symbol Minimum Maximum Units

Input power @ 0/3 V PIN +30 dBm

Input power @ 0/5 V PIN +30 dBm

Operating voltage VDD 8 V

Operating temperature TOP –40 +100 C

Storage temperature TSTG –65 +150 C

Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other

parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.

CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device

must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body

or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.

Electrical and Mechanical Specifications

The absolute maximum ratings of the SKY13317-373LF are

provided in Table 2. Electrical specifications are provided in

Table 3.

The state of the SKY13317-373LF is determined by the logic

provided in Table 4.

DATA SHEET • SKY13317-373LF: SP3T SWITCH

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200914K • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 13, 2014 3

Table 3. SKY13317-373LF Electrical Specifications (Note 1)

(VHIGH = 1.8 to 5.0 V, TOP = +25 C, Unless Otherwise Noted)

Parameter Symbol Test Condition Min Typical Max Units

Insertion loss IL RFC to RF1, RF2, RF3:

0.02 to 1.0 GHz

1.0 to 3.0 GHz

3.0 to 6.0 GHz

2.4 to 2.5 GHz

4.9 to 5.9 GHz

0.40

0.60

0.80

0.55

0.80

0.45

0.70

1.20

0.65

Isolation ISO RFC to RF1, RF2, RF3:

0.02 to 1.0 GHz

1.0 to 3.0 GHz

3.0 to 6.0 GHz

2.4 to 2.5 GHz

4.9 to 5.9 GHz

Return loss (insertion loss state) |S11| RFC to RF1, RF2, RF3:

0.02 to 1.0 GHz

1.0 to 3.0 GHz

3.0 to 6.0 GHz

2.4 to 2.5 GHz

4.9 to 5.9 GHz

Switching speed:

Rise time

Fall time

On time

Off time

10/90% RF

90/10% RF

50% control to 90/10%

Video feedthrough 50 mV

1 dB input compression point IP1dB 900 to 2450 MHz:

VLOW = 0 V, VHIGH = 3.3 V

VLOW = 0 V, VHIGH = 1.9 V

VLOW = 0 V, VHIGH = 1.8 V

48 MHz, VLOW = 0 V,

HIGH = 3.3 V

+29.0

+18.5

+17.5

+26.0

dBm

3rd Order Input Intercept Point IIP3 900 to 2450 MHz,

ΔF = 1 MHz,

IN = +17 dBm/tone

VLOW = 0 V, VHIGH = 2.1 V

VLOW = 0 V, VHIGH = 3.3 V

+33

+50

dBm

Control voltage VLOW = 0 to 0.25 V

@ 5 μA typical

VHIGH = 1.8 to 5.0 V

@ 10 μA typical

3.3

Note 1: Performance is guaranteed only under the conditions listed in this table.

Table 4. SKY13317-373LF Truth Table

Low Insertion Loss Path V1 (Pin 3) V2 (Pin 6) V3 (Pin 7)

RFC to RF1 High Low Low

RFC to RF2 Low High Low

RFC to RF3 Low Low High

ote: “High” = 1.8 to 5.0 V. “Low” = 0 to 0.25 V. Any state other than described in this Table places the switch into an undefined state. An undefined state will not damage the device.

DATA SHEET • SKY13317-373LF: SP3T SWITCH

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

4 October 13, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200914K

Typical Performance Characteristics

(RFC to RF1, RF2, RF3 (0, 3.3 V), TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted)

-40

-35

-30

-25

-20

-15

-10

-5

0 1000 2000 3000 4000 5000 6000

Frequency (MHz)

Input Return Loss (dB)

RFC to RF1

RFC to RF2

RFC to RF3

Figure 3. Input Return Loss (Insertion Loss State) vs Frequency

-30

-25

-20

-45

-40

-35

-15

-10

-5

0 1000 2000 3000 4000 5000 6000

Frequency (MHz)

Isolation (dB)

RFC to RF2

RFC to RF3

RF1 to RF2

RF1 to RF3

Figure 5. Isolation vs Frequency

(RFC to RF1 Insertion Loss State)

-25

-30

-15

-20

-50

-35

-40

-45

-10

-5

0 1000 2000 3000 4000 5000 6000

Frequency (MHz)

Isolation (dB)

RFC to RF1

RFC to RF2

RF3 to RF1

RF3 to RF2

Figure 7. Isolation vs Frequency

(RFC to RF3 Insertion Loss State)

-1.2

-1.0

-0.8

-0.6

-0.4

-0.2

0 1000 2000 3000 4000 5000 6000

Frequency (MHz)

Insertion Loss (dB)

RFC to RF1

RFC to RF2

RFC to RF3

Figure 4. Insertion Loss vs Frequency

-30

-20

-60

-40

-50

-10

0 1000 2000 3000 4000 5000 6000

Frequency (MHz)

Isolation (dB)

RFC to RF1

RFC to RF3

RF2 to RF1

RF2 to RF3

Figure 6. Isolation vs Frequency

(RFC to RF2 Insertion Loss State)

DATA SHEET • SKY13317-373LF: SP3T SWITCH

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200914K • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 13, 2014 5

Evaluation Board Description

The SKY13317-373LF Evaluation Board is used to test the

performance of the SKY13317-373LF SP3T Switch. An Evaluation

Board schematic diagram is provided in Figure 8. An assembly

drawing for the Evaluation Board is shown in Figure 9.

Package Dimensions

The PCB layout footprint for the SKY13317-373LF is provided in

Figure 10. Typical case markings are shown in Figure 11.

Package dimensions for the 8-pin MLP are shown in Figure 12,

and tape and reel dimensions are provided in Figure 13.

Package and Handling Information

Instructions on the shipping container label regarding exposure to

moisture after the container seal is broken must be followed.

Otherwise, problems related to moisture absorption may occur

when the part is subjected to high temperature during solder

assembly.

The SKY13317-373LF is rated to Moisture Sensitivity Level 1

(MSL1) at 260 C. It can be used for lead or lead-free soldering.

Care must be taken when attaching this product, whether it is

done manually or in a production solder reflow environment.

Production quantities of this product are shipped in a standard

tape and reel format.

S1925

RF1

RFC

N/C

RF2

RF3

6Switch Control

(See Table 4)

RF Port 3

RF Port 2

Switch Control

(See Table 4)

Switch Control

(See Table 4)

Antenna

RF Port 1

Note: C

= 47 pF for >500 MHz operation; 220 pF for 50 to 500 MHz operation.

Higher values recommended for lower frequency operation.

Exposed paddle must be grounded.

Use 10 nF blocking capacitors (C

) for <50 MHz operation.

Figure 8. SKY13317-373LF Evaluation Board Schematic

DATA SHEET • SKY13317-373LF: SP3T SWITCH

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

6 October 13, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200914K

S1926

RF2

RF1

GND

RFC

RF3

Figure 9. SKY13317-373LF Evaluation Board Assembly Diagram

0.70

0.35

1.20

0.60

8X 0.20

8X 0.35

8X 0.55

0.05

0.15 X 45°

0.40 Pitch

0.20 9X Exposed

Solder Area

0.20

S1924

Figure 10. SKY13317-373LF PCB Layout Footprint

(Top View)

DATA SHEET • SKY13317-373LF: SP3T SWITCH

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200914K • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 13, 2014 7

Pin 1

Indicator

Skyworks

Part Number

Figure 11. Typical Case Markings

(Top View)

Top View Side View Bottom View

0.05 C

Pin 1

Indicator

8X 3

0.05

1.5

1.5 A

Seating Plane Detail B

Detail D

0.02 +0.03/–0.02

0.127 Ref.

1.20 ± 0.05

0.70 ± 0.05

0.175 ± 0.075 0.175 ± 0.075

8X 0.2 Min.

0.175 ± 0.05 0.20 ± 0.05

0.15 0.15

0.4

0.175 ± 0.075

0.175 ± 0.05

0.15

0.15 X 45°

Pin 1 Indicator

Exposed Pad

2X 0.05

2X 0.20

0.40/0.50

Detail A

Detail C

Detail A

Scale: 2X

1X This Rotation

1X Rotated 180°

All measurements are in millimeters.

Dimensioning and tolerancing according to ASME Y14.5M-1994.

Coplanarity applies to the exposed heat sink slug as well as the terminals..

Plating requirement per source control drawing (SCD) 2504.

Dimension applies to metalized terminal, not measured in radius area.

0.05 C

S3450

0.07 C A B

0.05 C

Detail B

Scale: 2X

1X This Rotation

1X Rotated 180°

Detail C

Scale: 2X

2X This Rotation

2X Rotated 180°

Detail D

Scale: 1X

0.07 C A B

0.05 C

0.07 C A B

0.05 C

0.2

Figure 12. SKY13317-373LF 8-Pin MLP Package Dimensions

DATA SHEET • SKY13317-373LF: SP3T SWITCH

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

8 October 13, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200914K

S1382a

Notes:

1. Carrier tape: black conductive polycarbonate or polystyrene.

2. Cover tape material: transparent conductive PSA.

3. Cover tape size: 5.4 mm width.

4. All measurements are in millimeters.

5. Pin 1 orientation is in lower left corner for SOT-666 packages.

Pin 1 orientation is in upper left corner for 1.5 x 1.5 mm

MLPD, QFN, and DFN packages.

8.00 +0.30/–0.10

1.78 ± 0.05 (Bo)

1.78 ± 0.05 (Ao)

3.50 ± 0.05

ϕ1.50± 0.10

ϕ0.50± 0.05

4.00 ± 0.10

Pin 1

2.00 ± 0.05

0.20 ± 0.02 (T)

0.69 ± 0.05 (Ko)

1.75 ± 0.10

Max

Figure 13. SKY13317-373LF Tape and Reel Dimensions

DATA SHEET • SKY13317-373LF: SP3T SWITCH

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200914K • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 13, 2014 9

Ordering Information

Model Name Manufacturing Part Number Evaluation Board Part Number

SKY13317-373LF: SP3T Switch SKY13317-373LF SKY13317-373LF-EVB

Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by

Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the

information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to

update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.

No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or

information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions

of Sale.

THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A

PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY

DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS

SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,

LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGE.

Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,

death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any

damages resulting from such improper use or sale.

Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of

products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for

applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.

Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for

identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by

reference.