THIS PAGE INTENTIONALLY LEFT BLANK
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HIGH SPEED LOGIC - SMT
3
3 - 1
The HMC722LP3E is an AND/NAND/OR/NOR fun-
ction designed to support data transmission rates
of up to 13 Gbps, and clock frequencies as high
as 13 GHz. The HMC772LP3E may be easily con-
gured to provide any of the following logic functions:
AND, NAND, OR and NOR. The HMC722LP3E also
features an output level control pin, VR, which allows
for loss compensation or for signal level optimization.
All input signals to the HMC722LP3E are terminated with
50 Ohms to ground on-chip, and may be either AC or DC
coupled. The differential outputs of the HMC722LP3E
may be either AC or DC coupled. Outputs can be
connected directly to a 50 Ohm to ground terminated
system, while DC blocking capacitors may be used if
the terminating system is 50 Ohms to a non-ground
DC voltage. The HMC722LP3E operates from a single
-3.3V DC supply, and is available in a RoHS compliant
3x3 mm SMT package.
General Description
HMC722LP3E
Features
Functional Diagram
Supports High Data Rates: up to 13 Gbps
Differential & Singe-Ended Operation
Fast Rise and Fall Times: 19 / 18 ps
Low Power Consumption: 230 mW typ.
Programmable Differential
Output Voltage Swing: 600 - 1100 mV
Propagation Delay: 95 ps
Single Supply: -3.3V
16 Lead 3x3 mm SMT Package: 9 mm²
Typical Applications
The HMC722LP3E is ideal for:
• RF ATE Applications
• Broadband Test & Measurement
• Serial Data Transmission up to 13 Gbps
• Digital Logic Systems up to 13 GHz
• NRZ-to-RZ Conversion
Electrical Specications, TA = +25 °C, Vee = -3.3V
Parameter Conditions Min. Typ. Max Units
Power Supply Voltage -3.6 -3.3 -3.0 V
Power Supply Current 70 mA
Maximum Data Rate 13 Gbps
Maximum Clock Rate 13 GHz
Input High Voltage -0.5 0.5 V
Input Low Voltage -1.0 0.0 V
Input Return Loss Frequency <13 GHz 10 dB
Output Amplitude Single-Ended, peak-to-peak 550 mVp-p
Differential, peak-to-peak 1100 mVp-p
Output High Voltage -10 mV
13 Gbps, FAST RISE TIME AND/NAND/OR/NOR
GATE, w/ PROGRAMMABLE OUTPUT VOLTAGE
v00.0210
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HIGH SPEED LOGIC - SMT
3
3 - 2
Electrical Specications, (continued)
HMC722LP3E
v00.0210
13 Gbps, FAST RISE TIME AND/NAND/OR/NOR
GATE, w/ PROGRAMMABLE OUTPUT VOLTAGE
Parameter Conditions Min. Typ. Max Units
Output Low Voltage -570 mV
Output Rise / Fall Time Differential, 20% - 80% 19 / 18 ps
Output Return Loss Frequency <13 GHz 10 dB
Small Signal Gain 27 dB
Random Jitter Jr rms 0.2 ps rms
Deterministic Jitter, Jd peak-to-peak, 215-1 PRBS input [1] 2 ps, pp
Propagation Delay, td 95 ps
[1] Deterministic jitter calculated by simultaneously measuring the jitter of a 300 mV, 13 GHz, 215-1 PRBS input, and a single-ended output
[1] VR = 0.0V [2] Frequency = 13 GHz [3] Frequency = 10 GHz
DC Current vs. Supply Voltage [1] [2]
Output Differential
vs. Supply Voltage [1] [3]
Output Differential vs. VR [2] Output Differential vs. Frequency [3]
55
60
65
70
75
80
85
-3.7 -3.6 -3.5 -3.4 -3.3 -3.2 -3.1 -3 -2.9
+25C
+85C
-40C
DC CURRENT (mA)
SUPPLY VOLTAGE (V)
400
500
600
700
800
900
1000
1100
1200
-1.2 -1 -0.8 -0.6 -0.4 -0.2 0 0.2 0.4
+25C
+85C
-40C
VR (V)
DIFFERENTIAL VOLTAGE (mV)
800
850
900
950
1000
1050
1100
1150
1200
-3.7 -3.6 -3.5 -3.4 -3.3 -3.2 -3.1 -3 -2.9
+25C
+85C
-40C
DIFFERENTIAL VOLTAGE (mV)
SUPPLY VOLTAGE (V)
600
700
800
900
1000
1100
1200
1300
2 4 6 8 10 12 14 16
OUTPUT DIFFERENTIAL (mV)
INPUT FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HIGH SPEED LOGIC - SMT
3
3 - 3
HMC722LP3E
v00.0210
13 Gbps, FAST RISE TIME AND/NAND/OR/NOR
GATE, w/ PROGRAMMABLE OUTPUT VOLTAGE
[1] VR = 0.0V [2] Frequency = 13 GHz [3] Frequency = 10 GHz
Input Return Loss vs. Frequency Output Return Loss vs. Frequency
Rise / Fall Time vs. VR [3]
Rise / Fall Time vs. Supply Voltage [3]
-40
-35
-30
-25
-20
-15
-10
0 2 4 6 8 10 12 14
RETURN LOSS (dB)
FREQUENCY (GHz)
-40
-35
-30
-25
-20
-15
-10
0 2 4 6 8 10 12 14
RETURN LOSS (dB)
FREQUENCY (GHz)
15
17
19
21
23
25
-1.2 -1 -0.8 -0.6 -0.4 -0.2 0 0.2 0.4
tr
tf
RISE/FALL TIME (ps)
VR (V)
15
17
19
21
23
25
-3.7 -3.6 -3.5 -3.4 -3.3 -3.2 -3.1 -3 -2.9
tr
tf
RISE/FALL TIME (ps)
SUPPLY VOLTAGE (V)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HIGH SPEED LOGIC - SMT
3
3 - 4
HMC722LP3E
v00.0210
13 Gbps, FAST RISE TIME AND/NAND/OR/NOR
GATE, w/ PROGRAMMABLE OUTPUT VOLTAGE
Eye Diagram
Timing Diagram
Truth Table
Input Outputs
A B D
L L L
L H L
H L L
H H H
Notes:
A = AP - AN
B = BP - BN
D = DP - DN
H - Positive voltage level
L - Negative voltage level
[1] Test Conditions:
Pattern generated with an Agilent N4903A Serial BERT.
Eye Diagram presented on a Tektronix CSA 8000.
Device input = 10 Gbps PN code, Vin = 300mVp-p differential.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HIGH SPEED LOGIC - SMT
3
3 - 5
Absolute Maximum Ratings
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Power Supply Voltage (Vee) -3.75V to +0.5V
Input Signals -2V to +0.5V
Output Signals -1.5V to +1V
Storage Temperature -65°C to +150°C
Operating Temperature -40°C to +85°C
HMC722LP3E
v00.0210
13 Gbps, FAST RISE TIME AND/NAND/OR/NOR
GATE, w/ PROGRAMMABLE OUTPUT VOLTAGE
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Part Number Package Body Material Lead Finish MSL Rating Package Marking [3]
HMC722LP3E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] 722
XXXX
[1] Max peak reow temperature of 235 °C
[2] Max peak reow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HIGH SPEED LOGIC - SMT
3
3 - 6
HMC722LP3E
v00.0210
13 Gbps, FAST RISE TIME AND/NAND/OR/NOR
GATE, w/ PROGRAMMABLE OUTPUT VOLTAGE
Pin Descriptions
Pin Number Function Description Interface Schematic
1, 4, 5, 8, 9, 12 GND Signal Grounds
2, 3 AN, AP Clock / Data Input A
6, 7 BN, BP Clock / Data Input B
10, 11 DP, DN Clock / Data Output
13, 16 GND Supply Ground
14 VR
Output level control. Output level may be adjusted by
either applying a voltage to VR per “Output Differential vs.
VR” plot.
15, Package
Base Vee Negative Supply
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HIGH SPEED LOGIC - SMT
3
3 - 7
Evaluation PCB
HMC722LP3E
v00.0210
13 Gbps, FAST RISE TIME AND/NAND/OR/NOR
GATE, w/ PROGRAMMABLE OUTPUT VOLTAGE
List of Materials for Evaluation PCB 118777 [1]
Item Description
J1 - J6 PCB Mount SMA RF Connectors
J7 - J9 DC Pin
C1, C2 100 pF Capacitor, 0402 Pkg.
C3, C4 4.7 µF Capacitor, Tantalum
R1 10 Ohm Resistor, 0603 Pkg.
U1 HMC722LP3E
High Speed Logic, AND / NAND / OR / NOR
PCB [2] 118775 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25FR
Item Description
J1 AN
J2 AP
J3 BN
J4 BP
J5 DP
J6 DN
J7 Vee
J8 VR
J9 GND
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package gro-
und leads should be connected directly to the
ground plane similar to that shown. The exposed
package base should be connected to Vee. A suffi-
cient number of via holes should be used to connect
the top and bottom ground planes. The evaluation
circuit board shown is available from Hittite upon
request.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HIGH SPEED LOGIC - SMT
3
3 - 8
HMC722LP3E
v00.0210
13 Gbps, FAST RISE TIME AND/NAND/OR/NOR
GATE, w/ PROGRAMMABLE OUTPUT VOLTAGE
Application Circuit
