REVISIONS LTR DESCRIPTION DATE APPROVED A Adding new parts; vendor CAGE 71785. 88-03-16 R Marbias B Page 4, Revised marking paragraph. Added caution note. 92-06-10 James P. Donohue C Update to new DSCC Drawing format. Remove AQL and replace with C=O. Editorial changes throughout. Deleted vendor CAGE 71785. 01-06-29 Robert M. Heber Prepared in accordance with MIL-STD-100 REV PAGE REV STATUS REV C C C C C OF PAGES PAGE 1 2 3 4 5 PMIC A DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43216-5000 PREPARED BY Dennis L. Kelly Original date of drawing 8 May 1986 CHECKED BY TITLE CONNECTOR, ELECTRICAL, MINIATURE, RETAINER, SLIDING LOCK L. V. Olszewski APPROVED BY Richard Marbais SIZE A CAGE CODE 037Z3 REV C 85062 DWG. NO. PAGE AMSC N/A DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. 1 OF 5 5935-E636-16 Items DSCC drawing Part or Identifying Number (PIN) Retainer Retainer Retainer Retainer Retainer Post Post 85062-01 85062-02 85062-03 85062-04 85062-05 85062-06 85062-07 Inches .005 .015 .112 .144 .500 .609 .984 1.312 Dimensions in inches A 1.720 2.260 2.908 2.814 1.392 B C .500 1.312 .500 1.852 .500 2.500 .609 2.406 .500 .984 Steel Non-magnetic (brass) mm 0.13 0.38 2.84 3.66 12.70 15.47 24.99 33.32 Inches 1.380 1.720 1.852 2.260 2.406 2.500 2.814 2.908 mm 35.05 43.69 47.04 57.40 61.11 63.50 71.48 73.86 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. The two screws come with the sliding lock package. 4. Order additional lock posts as required. 5. Unless otherwise specified, tolerance is .015 (0.38 mm). FIGURE 1. Retainer, sliding lock. DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 SIZE A CAGE CODE DWG NO. 85062 037Z3 REV C PAGE 2 Inches .015 .102 .112 .416 mm 0.38 2.59 2.84 10.57 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. The two screws come with the sliding lock package. 4. Order additional lock posts as required. 5. Unless otherwise specified, tolerance is .015 (0.38 mm). FIGURE 2. Post, sliding lock. DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 SIZE A CAGE CODE DWG NO. 85062 037Z3 REV C PAGE 3 ENGINEERING DATA: Description: Accessory for subminiature rectangular connector. Material: Retainer plate: Corrosion resisting steel. Hardware: Cold rolled steel. Finish: Retainer plate: Passivated. Hardware: Cadmium plate, yellow chromate. Outline drawing: See figure 1. Marking: The item shall be marked with the DSCC PIN and the manufacturers CAGE code and name in accordance with the basic requirements of MIL-STD-1285. Workmanship: The item shall be manufactured in such a manner as to be uniform in quality and shall be free from defects that may adversely affect the intended function of the item in its intended application. Lot conformance testing: The manufacturer shall be responsible for assuring compliance to all the requirements of this drawing. Samples shall be selected in accordance with table I. If one or more defects are found, the lot shall be screened for that particular defect and defects removed. A new sample of parts shall be selected in accordance with table I and tested to the requirements of this drawing. If one or more defects are found in the second sample, the lot shall be rejected and shall not be supplied to this specification. TABLE I. Lot and sample size. Lot size 2 to 25 26 to 50 51 to 90 91 to 150 151 to 280 281 to 500 501 to 1,200 1,201 to 3,200 3,201 to 10,000 10,001 and over DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 Sample size 3 5 6 7 10 11 15 18 22 29 SIZE A CAGE CODE DWG NO. 85062 037Z3 REV C PAGE 4 Approved sources of supply are listed herein. Additional sources will be added as they become available. The vendors listed on the requirements drawing have agreed to this drawing and a certificate of compliance has been submitted to DSCC-VAI. DSCC drawing PIN Vendor similar PIN 1/ CAGE 71468 DA51220-1 DB51221-1 DC51222-1 DD51223-1 DE51224-1 D53018 D53018-5 85062-01 85062-02 85062-03 85062-04 85062-05 85062-06 85062-07 1/ Caution. Do not use this number for item acquisition. Items acquired to this number may not satisfy the performance requirements of this drawing. Vender CAGE number 71468 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 Vendor name and address ITT Cannon P.O. Box 929 666 Dyer Road Santa Ana, CA 92702 SIZE A CAGE CODE DWG NO. 85062 037Z3 REV C PAGE 5