TX2SS5J - PANASONIC - Datasheet.Directory

ds_61022_en_tx: 280114D

ORDERING INFORMATION

Best seller with broad

lineup and AC 2000 V

breakdown voltage. TX RELAYS

FEATURES

1. 2,000 V breakdown voltage between

contact and coil

The body block construction of the coil

that is sealed at formation offers a high

breakdown voltage of 2,000 V between

contact and coil, and 1,000 V between

open contacts.

2. Outstanding surge resistance

Surge breakdown voltage between

open contacts:

1,500 V 10160 sec. (FCC part 68)

Surge breakdown voltage between

contact and coil:

2,500 V 210 sec. (Bellcore)

3. Nominal operating power: High

sensitivity of 140mW

By using the highly efficient polar

magnetic circuit “seesaw balance

mechanism”, a nominal operating

power of 140 mW (minimum operating

power of 79 mW) has been achieved.

4. High contact capacity: 2 A 30 V DC

5. Compact size

15.0(L)  7.4(W)  8.2(H) .

591(L)  .291(W)  .323(H)

6. The use of gold-clad twin crossbar

contacts ensures high contact

reliability.

*We also offer a range of products

with AgPd contacts suitable for use

in low level load analog circuits

(max. 10V DC 10 mA).

7. Outstanding vibration and shock

resistance

Functional shock resistance: 750 m/s2

Destructive shock resistance:

1,000 m/s2

Functional vibration resistance:

10 to 55 Hz (at double amplitude of

3.3 mm .130 inch)

Destructive vibration resistance:

10 to 55 Hz (at double amplitude of

5 mm .197 inch)

8. Sealed construction allows

automatic washing.

9. A range of surface-mount types is

also available

SA: Low-profile surface-mount

terminal type

SS: Space saving surface-mount

terminal type

10.Sealed according to RTIII (IP67)

TYPICAL APPLICATIONS

1. Communications (xDSL,

Transmission)

2. Measurement

3. Security

4. Home appliances, and audio/visual

equipment

5. Automotive equipment

6. Medical equipment

Nominal coil voltage (DC)*

1.5, 3, 4.5, 5, 6, 9, 12, 24, 48V

Contact arrangement

2: 2 Form C

TX 2

Terminal shape

Nil: Standard PC board terminal or surface-mount terminal

Contact material

Nil:

Standard contact (Ag+Au clad)

AgPd contact (low level load); AgPd+Au clad (stationary), AgPd (movable)

Operating function

Nil:

L2:

LT:

Single side stable

1 coil latching

2 coil latching

Surface-mount availability

Nil:

SA:

SS:

Standard PC board terminal type

SA type

SS type

Packing style

Nil:

Tube packing

Tape and reel (picked from 1/3/4/5-pin side)

Tape and reel packing (picked from the 8/9/10/12-pin side)

Notes: 1. *48 V coil type: Single side stable only

2. In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.

2ds_61022_en_tx: 280114D

TYPES

1. Standard PC board terminal

Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.

Note: Please add “-1” to the end of the part number for AgPd contacts (low level load).

2. Surface-mount terminal

1) Tube packing

: For each surface-mounted terminal identification, input the following letter. SA type: A, SS type: S

Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.

Note: Please add “-1” to the end of the part number for AgPd contacts (low level load).

2) Tape and reel packing

: For each surface-mounted terminal identification, input the following letter. SA type: A, SS type: S

Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs.

Notes: 1. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/2/3/4-pin side) is also available.

2. Please add “-1” to the end of the part number for AgPd contacts (low level load).

Contact

arrangement Nominal coil

voltage Single side stable 1 coil latching 2 coil latching (L2) 2 coil latching (LT)

Part No. Part No. Part No. Part No.

2 Form C

1.5V DC TX2-1.5V TX2-L-1.5V TX2-L2-1.5V TX2-LT-1.5V

3V DC TX2-3V TX2-L-3V TX2-L2-3V TX2-LT-3V

4.5V DC TX2-4.5V TX2-L-4.5V TX2-L2-4.5V TX2-LT-4.5V

5V DC TX2-5V TX2-L-5V TX2-L2-5V TX2-LT-5V

6V DC TX2-6V TX2-L-6V TX2-L2-6V TX2-LT-6V

9V DC TX2-9V TX2-L-9V TX2-L2-9V TX2-LT-9V

12V DC TX2-12V TX2-L-12V TX2-L2-12V TX2-LT-12V

24V DC TX2-24V TX2-L-24V TX2-L2-24V TX2-LT-24V

48V DC TX2-48V — — —

Contact

arrangement Nominal coil

voltage Single side stable 1 coil latching 2 coil latching (L2) 2 coil latching (LT)

Part No. Part No. Part No. Part No.

1.5V DC TX2S-1.5V TX2S-L-1.5V TX2S-L2-1.5V TX2S-LT-1.5V

3V DC TX2S-3V TX2S-L-3V TX2S-L2-3V TX2S-LT-3V

4.5V DC TX2S-4.5V TX2S-L-4.5V TX2S-L2-4.5V TX2S-LT-4.5V

5V DC TX2S-5V TX2S-L-5V TX2S-L2-5V TX2S-LT-5V

6V DC TX2S-6V TX2S-L-6V TX2S-L2-6V TX2S-LT-6V

9V DC TX2S-9V TX2S-L-9V TX2S-L2-9V TX2S-LT-9V

12V DC TX2S-12V TX2S-L-12V TX2S-L2-12V TX2S-LT-12V

24V DC TX2S-24V TX2S-L-24V TX2S-L2-24V TX2S-LT-24V

48V DC TX2S-48V — — —

Contact

arrangement Nominal coil

voltage Single side stable 1 coil latching 2 coil latching (L2) 2 coil latching (LT)

Part No. Part No. Part No. Part No.

2 Form C

1.5V DC TX2S-1.5V-Z TX2S-L-1.5V-Z TX2S-L2-1.5V-Z TX2S-LT-1.5V-Z

3V DC TX2S-3V-Z TX2S-L-3V-Z TX2S-L2-3V-Z TX2S-LT-3V-Z

4.5V DC TX2S-4.5V-Z TX2S-L-4.5V-Z TX2S-L2-4.5V-Z TX2S-LT-4.5V-Z

5V DC TX2S-5V-Z TX2S-L-5V-Z TX2S-L2-5V-Z TX2S-LT-5V-Z

6V DC TX2S-6V-Z TX2S-L-6V-Z TX2S-L2-6V-Z TX2S-LT-6V-Z

9V DC TX2S-9V-Z TX2S-L-9V-Z TX2S-L2-9V-Z TX2S-LT-9V-Z

12V DC TX2S-12V-Z TX2S-L-12V-Z TX2S-L2-12V-Z TX2S-LT-12V-Z

24V DC TX2S-24V-Z TX2S-L-24V-Z TX2S-L2-24V-Z TX2S-LT-24V-Z

48V DC TX2S-48V-Z — — —

ds_61022_en_tx: 280114D

RATING

1. Coil data

1) Single side stable

2) 1 coil latching

3) 2 coil latching (L2, LT)

*Pulse drive (JIS C 5442-1986)

Nominal coil

voltage Pick-up voltage

(at 20C 68F)Drop-out voltage

(at 20C 68F)

Nominal operating

current

[10%] (at 20C 68F)

Coil resistance

[10%] (at 20C 68F)Nominal operating

power Max. applied voltage

(at 20C 68F)

1.5V DC

75%V or less of

nominal voltage*

(Initial)

10%V or more of

nominal voltage*

(Initial)

93.8mA 16

140mW 150%V of

nominal voltage

3V DC 46.7mA 64.3

4.5V DC 31mA 145

5V DC 28.1mA 178

6V DC 23.3mA 257

9V DC 15.5mA 579

12V DC 11.7mA 1,028

24V DC 5.8mA 4,114

48V DC 5.6mA 8,533270mW 120%V of

nominal voltage

Nominal coil

voltage Set voltage

(at 20C 68F)Reset voltage

(at 20C 68F)

Nominal operating

current

[10%] (at 20C 68F)

Coil resistance

[10%] (at 20C 68F)Nominal operating

power Max. applied voltage

(at 20C 68F)

1.5V DC

75%V or less of

nominal voltage*

(Initial)

75%V or less of

nominal voltage*

(Initial)

66.7mA 22.5

100mW 150%V of

nominal voltage

3V DC 33.3mA 90

4.5V DC 22.2mA 202.5

5V DC 20mA 250

6V DC 16.7mA 360

9V DC 11.1mA 810

12V DC 8.3mA 1,440

24V DC 4.2mA 5,760

Nominal coil

voltage Set voltage

(at 20C 68F)Reset voltage

(at 20C 68F)

Nominal operating

current

[10%] (at 20C 68F)

Coil resistance

[10%] (at 20C 68F)Nominal operating

power Max. applied voltage

(at 20C 68F

Set coil Reset coil Set coil Reset coil Set coil Reset coil

1.5V DC

75%V or less of

nominal voltage*

(Initial)

75%V or less of

nominal voltage*

(Initial)

133.9mA 133.9mA 11.211.2

200mW 200mW 150%V of

nominal voltage

3V DC 66.7mA 66.7mA 4545

4.5V DC 44.5mA 44.5mA 101.2101.2

5V DC 40mA 40mA 125125

6V DC 33.3mA 33.3mA 180180

9V DC 22.2mA 22.2mA 405405

12V DC 16.7mA 16.7mA 720720

24V DC 8.3mA 8.3mA 2,8802,880

4ds_61022_en_tx: 280114D

2. Specifications

1* This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual

load. (AgPd contact type is available for low level load switching [10V DC, 10mA max. level].)

2* Refer to “6. Usage, Storage and Transport Conditions“ in AMBIENT ENVIRONMENT section in Relay Technical Information.

REFERENCE DATA

Characteristics Item Specifications

Contact

Arrangement 2 Form C

Initial contact resistance, max. Max. 100 m (By voltage drop 6 V DC 1A)

Contact material Standard contact: Ag+Au clad,

AgPd contact (low level load): AgPd+Au clad (stationary), AgPd (movable)

Rating

Nominal switching capacity Standard contact: 2 A 30 V DC, AgPd contact: 1 A 30 V DC (resistive load)

Max. switching power Standard contact: 60 W (DC), AgPd contact: 30 W (DC) (resistive load)

Max. switching voltage 220V DC

Max. switching current Standard contact: 2 A, AgPd contact: 1 A

Min. switching capacity (Reference value)1* 10A 10mV DC

Nominal operating

power

Single side stable 140 mW (1.5 to 24 V DC), 270 mW (48 V DC)

1 coil latching 100 mW (1.5 to 24 V DC)

2 coil latching 200 mW (1.5 to 24 V DC)

Electrical

characteristics

Insulation resistance (Initial) Min. 1,000M (at 500V DC)

Measurement at same location as “Initial breakdown voltage” section.

Breakdown voltage

(Initial)

Between open contacts 1,000 Vrms for 1min. (Detection current: 10mA)

Between contact and coil 2,000 Vrms for 1min. (Detection current: 10mA)

Between contact sets 1,000 Vrms for 1min. (Detection current: 10mA)

Surge breakdown

voltage (Initial) Between open contacts 1,500 V (10160s) (FCC Part 68)

Between contacts and coil 2,500 V (210s) (Telcordia)

Temperature rise (at 20C 68F)Max. 50C

(By resistive method, nominal coil voltage applied to the coil; contact carrying current: 2A.)

Operate time [Set time] (at 20C 68F)Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce

time.)

Release time [Reset time] (at 20C 68F)Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce

time.) (without diode)

Mechanical

characteristics

Shock resistance Functional Min. 750 m/s2 (Half-wave pulse of sine wave: 6 ms; detection time: 10s.)

Destructive Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.)

Vibration resistance Functional 10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10s.)

Destructive 10 to 55 Hz at double amplitude of 5 mm

Expected life Mechanical Min. 108 (at 180 times/min.)

Electrical Min. 105 (2 A 30 V DC resistive), 5105 (1 A 30 V DC resistive) (at 20 times/min.)

Conditions Conditions for operation, transport and storage2* Ambient temperature: –40C to +85C (up to 24 V coil) –40F to +185F (up to 24 V coil)

[–40C to +70C (48 V coil) –40F to +158F (48 V coil)];

Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)

Max. operating speed (at rated load) 20 times/min.

Unit weight Approx. 2 g .071 oz

1. Maximum switching capacity 2. Life curve 3. Mechanical life

Tested sample: TX2-5V, 10 pcs.

Operating speed: 180 times/min.

0.2

0.3

0.4

0.5

1.0

2.0

3.0

20 30 50 100 200 300

DC resistive load

Contact voltage, V

Switching current, A

1.0 2.0

100

Switching current, A

No. of operations x10

30V DC

resistive load

100 10,0001,00010

Max.

Min.

100

No. of operations, x104

Ratio against the rated voltage, %V

Pick-up voltage

Drop-out voltage

ds_61022_en_tx: 280114D

4. Electrical life (2A 30V DC resistive load)

Tested sample: TX2-5V, 6 pcs.

Operating speed: 20 times/min.

Change of pick-up and drop-out voltage Change of contact resistance

5-(1). Coil temperature rise

Tested sample: TX2-5V, 6 pcs.

Point measured: Inside the coil

Ambient temperature: 25C 77F, 85C 185F

101

Max.

Min.

100

23456789

Max.

No. of operations, ×104

Ratio against the rated voltage, %V

Pick-up voltage

Drop-out voltage

101

Max.

Min.

100

23456789

No. of operations, ×104

Contact resistance, mΩ

100 120 150

110 130 140

+25°C

+85°C

Coil applied voltage, %

Temperature rise, °C

+77°F

+185°F

5-(2). Coil temperature rise

Tested sample: TX2-48V, 6 pcs.

Point measured: Inside the coil

Ambient temperature: 25C 77F, 70C 158F

6-(1). Operate and release time (with diode)

Tested sample: TX2-5V, 10 pcs. 6-(2). Operate and release time (without diode)

Tested sample: TX2-5V, 10 pcs.

100 120 150

110 130 140

+25°C

+70°C

Coil applied voltage, %

Temperature rise, °C

+77°F

+158°F

70 80 100 120

90 110

Max.

Min.

Coil applied voltage, %V

Operate and release time, ms

Operate time

Release time

70 80 100 120

90 110

Max.

Min.

Coil applied voltage, %V

Operate and release time, ms

Operate time

Release time

7. Ambient temperature characteristics

Tested sample: TX2-5V, 5 pcs. 8-(1). High frequency characteristics

(Isolation)

Tested sample: TX2-12V, 2 pcs.

8-(2). High frequency characteristics

(Insertion loss)

Tested sample: TX2-12V, 2 pcs.

–40

–20

–40 –20 02040 60 80

Ambient temperature, °C

Rate of change, %

Drop-out

voltage

Pick-up voltage

10 100 1,000

100

Frequency, MHz

Isolation, dB

0.6

10 100 1,000

0.2

0.4

1.0

0.8

Frequency, MHz

Insertion loss, dB

9 Malfunctional shock (single side stable)

Tested sample: TX2-5V, 6 pcs. 10-(1). Influence of adjacent mounting

Tested sample: TX2-12V, 6 pcs. 10-(2). Influence of adjacent mounting

Tested sample: TX2-12V, 6 pcs.

Z' X'

Z' ZXX'

1000m/s2

Deenergized condition

Energized condition

–5

5ON ON

OFF OFF

10624 80

OFF

Pick-up voltage

Drop-out voltage

Inter-relay distance , mm

Rate of change, % Rate of change, %

.394.236.079 .157 .315

inch

–5

5ON

OFF

10624 80

Pick-up voltage

Drop-out voltage

Inter-relay distance , mm

Rate of change, % Rate of change, %

.394.236.079 .157 .315

inch

6ds_61022_en_tx: 280114D

DIMENSIONS (mm inch)

1. Standard PC board terminal

2. Surface-mount terminal

Type External dimensions (General tolerance: 0.3 .012) Suggested mounting pad (Top view) (Tolerance: 0.1 .004)

Single side stable and

1 coil latching type 2 coil latching type (L2, LT) Single side stable and

1 coil latching type 2 coil latching type (L2, LT)

SA type

SS type

11. Pulse dialing test

Tested sample: TX2-5V, 6 pcs.

(35 mA 48 V DC wire spring relay load)

Circuit

Change of pick-up and drop-out voltage Change of contact resistance

48V DC

458 Ω

0.08

μF0.08

μF

458 Ω

–

Wire spring relay

20 503010

Max.

Min.

100

No. of operation, ×104

Ratio against the rated voltage, %V

Pick-up voltage

Drop-out voltage

Max.

Min.

100

10 20 30 40

No. of operations, ×104

Contact resistance, mΩ

Note: Data of surface-mount type are the same as those of PC board terminal type.

Download from our Web site.

CAD Data

CAD Data Single side stable and 1 coil latching type

External dimensions

Standard PC board terminal

General tolerance: 0.3 .012

2 coil latching type (L2, LT)

External dimensions

Standard PC board terminal

General tolerance: 0.3 .012

15.00

.591 7.40

.291

0.25

.010

1.15

.020

0.50

5.08 2.54

.045 .200 .100

5.08

.200

8.20

.323

3.50

.138

.026

0.65

15.00

1.15

.020

5.08 2.54

7.40

5.08

0.25

.591

0.50

.045 .200 .100

.291

.200

.010

.026

0.65

3.50

.138

8.20

.323

PC board pattern

(Bottom view)

Tolerance: 0.1 .004

5.08

2.54

8-1.0 dia.

10.16

.200

.100

8-.039 dia.

.400

Schematic (Bottom view)

Single side stable

(Deenergized condition)

1 coil latching

(Reset condition)

Direction indication

12 10 9 8

1 3 4 5

–

Direction indication

12 10 9 8

1 3 4 5

–

PC board pattern

(Bottom view)

Tolerance: 0.1 .004

5.08

2.54

10-1.0 dia.

12.7

.200

.100

10-.039 dia.

.500

Schematic (Bottom view)

2 coil latching (L2)

(Reset condition)

2 coil latching (LT)

(Reset condition)

Direction indication

12 10 9 8 7

1 3 4 5 6

–

Direction indication

12 10 9 8 7

1 3 4 5 6

–

CAD Data

.591

0.65

.026 5.08

.200

5.08

.200

2.54

.100

8.2

.323

0.5

.020

0.25

.010

8.4

.331

9.4±0.5

.370±.020

.291

7.4 .591

0.65

.026 5.08

.200

5.08

.200

2.54

.100

8.2

.323

0.5

.020

0.25

.010

8.4

.331

9.4±0.5

.370±.020

.291

7.4 5.08

.200

.039

.100

2.54

.124

3.16

7.24

.285

5.08

.200

.039

.100

2.54

.124

3.16

7.24

.285

.591

0.65

.026 5.08

.200

5.08

.200

0.25

.010

0.5

.020

8.2

.323

2.54

.100

Max.10

.394

7.4±0.5

.291±.020

.291

7.4 .591

0.65

.026 5.08

.200

5.08

.200

0.25

.010

0.5

.020

8.2

.323

2.54

.100

Max.10

.394

7.4±0.5

.291±.020

.291

7.4 5.08 .100

2.54

.200

.039

.085

2.16

6.24

.246

5.08

.100

2.54

.200

.039

.085

2.16

6.24

.246

ds_61022_en_tx: 280114D

Schematic (Top view)

NOTES

For Cautions for Use, see Relay Technical Information.

Single side stable

(Deenergized condition)

1 coil latching

(Reset condition)

2 coil latching (L2)

(Reset condition)

2 coil latching (LT)

(Reset condition)

Direction indication

1 3 4 5

12 10 9 8

–

Direction indication

1 3 4 5

12 10 9 8

–

Direction indication

+–

–

12 10 9 8 7

1 3 4 5 6

Direction indication

–

12 10 9 8 7

1 3 4 5 6

1. Packing style

1) The relay is packed in a tube with the

relay orientation mark on the left side, as

shown in the figure below.

2) Tape and reel packing (surface-mount

terminal type)

(1) Tape dimensions

(i) SA type mm inch

(ii) SS type mm inch

(2) Dimensions of plastic reel mm inch

2. Automatic insertion

To maintain the internal function of the

relay, the chucking pressure should not

exceed the values below.

Chucking pressure in the direction A:

4.9 N {500gf} or less

Chucking pressure in the direction B:

9.8 N {1 kgf} or less

Chucking pressure in the direction C:

9.8 N {1 kgf} or less

Please chuck the portion.

Avoid chucking the center of the relay.

In addition, excessive chucking pressure

to the pinpoint of the relay should be

avoided.

Orientation (indicates PIN No.1) stripe

Stopper (gray) Stopper (green)

Relays

Tape coming out direction

16.0

.630 .394

4.0

24.0±0.3

.945±.012 ±0.2

9.2±.008

.362

0.4

Relay polarity bar

(Z type) 2.0

11.5

1.75

15.5

.059 dia.

+.004

1.5 dia.

+0.1

.157 .016

.079 .069

.610

.453

10.0

8.0

.315

16.0

Relays

Tape coming out direction

.630

4.0

24.0±0.3

.945±.012 ±0.2

10.8±.008

.425

0.4

Relay polarity bar

(Z type) 2.0

11.5

15.5

1.75

.059 dia.

+.004

1.5 dia.

+0.1

.157 .016

.079 .069

.453

.610

2.0

.079

13 dia.

.512 dia.

21 dia.

.827 dia. 80 dia.

3.150 dia.

380 dia.

14.961 dia.

ACB