To meet today’s diverse embedded ngerprint product
needs, the UPEK TCESC4K swipe ngerprint module
oers three interface options for device exibility:
• USB (Full speed): For USB peripherals such as
ngerprint readers, keyboards and smart
card readers.
• UART (RS-232): Common serial interface
available on most embedded processors. (up to
230.4 kbps)
• SPI: Higher speed serial interface. More exible
and fewer connect lines. (250k to 1Mbps)
Flexible Connection Options
Specications
UPEK, Inc.
5900 Christie Ave
Emeryville, CA 94608 U.S.A.
Tel: +1-510-420-2600
Fax: +1-510-420-2699
www.upek.com
sales@upek.com
UPEK PTE LTD
55 UBI Avenue 3
#03-00 Mintwell Building
Singapore 408864
Tel: +65-6746-6323
TCESC4K 2009 05
Beijing
+86-10-59231229
Prague
+420-296-390-200
Taipei
+866-223-460-866
Tokyo
+81-3-3373-4381
TouchStrip Fingerprint Authentication Module (TCESC4K )
© 2009 UPEK®, Inc. All rights reserved. UPEK, the UPEK corporate logo,TouchStrip, SteelCoat, and HD3D are trademarks
or registered trademarks of UPEK, Inc. in the U.S. and other countries. All other trademarks are the property of their
respective owners. All specifications are subject to change without notice.
To help customers design products using UPEK’s
embedded swipe ngerprint module, UPEK oers
development kits, evaluation kits and ngerprint
sensors. Contact UPEK sales for details.
Product Part Number
TouchStrip Embedded Module TCESC4KS0C0
(TCS4K sensor, TCD50D processor, USB/SPI/UART)
TCESC4K Starter Kit TCKT06
(80 TCESC4K modules)
MOQ for bulk orders: 400
TouchStrip Embedded Development Kit TCKDSMOD
(Sample HW, development board, SW tools & docs)
Product Ordering Information
Hardware
Fingerprint sensor
Processor
Fingerprint Template database size
ESD
Power (typical)
Finger Detection option
Dimensions
Environmental
Biometric Capabilities
Swipe Speed
Match Time
Sensor Durability
Swipe resistance
Pen scratch resistance
Pen Drop resistance
Ball Drop resistance
Waterproof
Chemical resistance
Software & Tools
PerfectTrust API (PTAPI)
[Embedded]
Biometric Services API (BSAPI)
Driver Support
TCS4K (192 pixels)
508 or 381 DPI
9.6 x 25mm image size
SteelCoat protective layer
TCD50D, 32-bit RISC, 144 MIPS
Up to ~100 templates (typical)
IEC 61000-4-2 level 4
+/- 15KV air, +/- 8KV contact
3.0V to 3.6V
78ma (capture, match, navigate)
Standby (USB): 1350uA
Standby (UART/SPI): 1150uA
Wakes processor, to save power
20.0 x 19.7 x 3.6mm
0.80” x 0.77“ x 0.14”
Operating temp: -30°C to +70°C
Storage temp: -30°C to +125°C
Humidity: 5%-93%, non-condensing
ROHS, Low Halogen
~40cm/sec (15in/sec)
1 nger: <0.4 sec (from nger lifto)
15 ngers: <0.75 sec
100 ngers: ~2.5 sec
>20 million swipes
6H hardness with 20N force
60cm
60cm
24h water soak
24h contamination with over 20 chemicals
Image capture & transfer,
enrollment, match
Windows 32-bit and 64-bit; Linux x86
PTAPI features plus support for RSA/OATH OTP, secure
network communications & other features (USB only)
UART and SPI interface libraries - reference
implementation for 32-bit MCUs in C source code
USB: Windows 2000/XP/Vista (signed)
UART: Windows 2000/XP/Vista, WinCE
SPI: provided by customer
9.6mm 19.7mm
Module Top Module Bottom
20.0mm