SURFACE MOUNT LED LAMP 0603 (0.8 mm Height) QTLP600CEB_7839D PACKAGE DIMENSIONS | sas) 0.035 (0.9) It. 4 ot 0.028 (0.7) | f TOP + 0.047 (4.2) i 4 ea LL at 0.012 (0.3) to SIDE 0.039 (4.0) rT 41 4 KAP BOTTOM CATHODE MARK +>_ - POLARITY NOTE: Dimensions for all drawings are in inches (mm). DESCRIPTION APPLICATIONS Keypad backlighting Push-button backlighting LCD backlighting This surface mount chip LED is designed to fit industry standard footprint. Small size, low profile and wide viewing angle make this LED an ideal choice for backlighting applications and panel illumination. This device utilizes an InGaN/Sapphire blue LED. FEATURES Miniature footprint - 1.6(L) X 0.8(W) X 0.8(H) mm * Wide viewing angle of 100 Water clear optics Moisture-proof packaging Available in 0.315" (8mm) width tape on 13" (330mm) diameter reel; 10,000 units per reel 2003 Fairchild Semiconductor Corporation 8/29/03SURFACE MOUNT LED LAMP 0603 (0.8 mm Height) QTLP600CEB_7839D ABSOLUTE MAXIMUM RATINGS (T, = 25C unless otherwise specified) Parameter Symbol Rating Unit Operating Temperature Topr -40 to +85 C Storage Temperature TstG -40 to +90 C Lead Soldering Time Tso. 260 for 5 sec 86 Continuous Forward Current lp 30 mA Peak Forward Current I (f= 1.0 KHz, Duty Factor = 1/10) EM 100 ma Reverse Voltage Vr 5 Vv Power Dissipation Pp 80 mw ELECTRICAL / OPTICAL CHARACTERISTICS (T, =25C) Part Number QTLP600CEB_7839D Condition Luminous Intensity (med) Bin |4 8-16 IF=5mA Bin |l2 13 - 26 Forward Voltage (V) Binv1 2.75 - 2.95 IF=5mA Binv2 2.95 - 3.15 Dominant Wavelength (nm) BinW1 465 - 470 IF=5mA BinW2 470 - 475 Spectral Line Half Width (nm) 35 IF=5mA Viewing Angle () 100 Ip =5mA Bin code I1 corresponds to the intensity range of 8 to 16 mcd. Bin code |2 corresponds to the intensity range of 13 to 26 mcd. Bin code V1 corresponds to the forward voltage range of 2.75 to 2.95 V. Bin code V2 corresponds to the forward voltage range of 2.95 to 3.15 V. Bin code W1 corresponds to the dominant wavelength range of 465 to 470 nm. Bin code W2 corresponds to the dominant wavelength range of 470 to 475 nm. 2003 Fairchild Semiconductor Corporation Page 2 of 6 8/29/03SURFACE MOUNT LED LAMP 0603 (0.8 mm Height) QTLP600CEB_7839D [TYPICAL PERFORMANCE CURVES Fig. 1 Forward Current vs. Forward Voltage Fig. 2 Relative Luminous Intensity vs. DC Forward Current Ip - FORWARD CURRENT (mA) RELATIVE LUMNOUS INTENSITY (NORMALIZED AT 20 mA) 4.0 20 a0 4.0 5.0 0 5 10 15 20 28 30 Ve - FORWARD VOLTAGE (V) F - DC FORWARD CURRENT (mA) Fig. 3 Relative Intensity vs. Peak Wavelength RELATIVE INTENSITY 300 350 400 450 500 550 600 50 700 750 WAVELENGTH (nm) Fig. 5 Maximum Forward Current vs. Ambient Temperature Fig. 4 Radiation Diagram Ip - FORWARD CURRENT (mA) 0 20 40. 0 80 400 REL. LUMINOUS INTENSITY (%) Ta - AMBIENT TEMPERATURE (C) 2003 Fairchild Semiconductor Corporation Page 3 of 6 8/29/03: SURFACE MOUNT LED LAMP EVERLIGHT 0603 (0.8 mm Height) QTLP600CEB_7839D [RECOMMENDED PRINTED CIRCUIT BOARD PATTERN 0.083 (0.85) 0.031 (0.80) | | 0.031 (0.80) 0.039 (1.00) RECOMMENDED IR REFLOW SOLDERING PROFILE 5 sec MAX soldering time +5 Cis MAX -5 Cis MAX 240 C MAX 60 - 120 sec Preheating 120-150C a 2003 Fairchild Semiconductor Corporation Page 4 of 6 8/29/037 SURFACE MOUNT LED LAMP ul 0603 (0.8 mm Height) QTLP600CEB_7839D [TAPE AND REEL DIMENSIONS 2 2.040.05 i | @1 55.405 | | | | 1 OLFO LOLS O1F 0 0EES > : 3.540.085 oy 1 4 a ry Polarity inaiee 08 ngle: + 0. Unit: mm m 13.5415 me 17.5415 ~ype 0.2340.1 Dimensional tolerance is + 0.1mm unless otherwise specified 2003 Fairchild Semiconductor Corporation Page 5 of 6SURFACE MOUNT LED LAMP 0603 (0.8 mm Height) QTLP600CEB_7839D DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 2003 Fairchild Semiconductor Corporation Page 6 of 6 8/29/03