BZX384-V-Series
www.vishay.com Vishay Semiconductors
Rev. 1.8, 22-Nov-11 1Document Number: 85764
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Small Signal Zener Diodes
FEATURES
• Silicon planar power Zener diodes
• The Zener voltages are graded according to the
international E 24 standard
• Standard Zener voltage tolerance is ± 5 %;
replace “C” with “B” for ± 2 % tolerance
• AEC-Q101 qualified
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
PRIMARY CHARACTERISTICS
PARAMETER VALUE UNIT
VZ range nom. 2.4 to 75 V
Test current IZT 2; 5 mA
VZ specification Pulse current
Int. construction Single
ORDERING INFORMATION
DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY
BZX384-V-series BZX384-V-series-GS18 10 000 (8 mm tape on 13" reel) 10 000/box
BZX384-V-series BZX384-V-series-GS08 3000 (8 mm tape on 7" reel) 15 000/box
PACKAGE
PACKAGE NAME WEIGHT MOLDING COMPOUND
FLAMMABILITY RATING
MOISTURE SENSITIVITY
LEVEL
SOLDERING
CONDITIONS
SOD-323 4.3 mg UL 94 V-0 MSL level 1
(according J-STD-020) 260 °C/10 s at terminals
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Power dissipation Device on fiberglass substrate Ptot 200 mW
Junction to ambient air Valid that electrodes are kept at ambient
temperature RthJA 650 K/W
Junction temperature Tj150 °C
Storage temperature range Tstg - 65 to + 150 °C
BZX384-V-Series
www.vishay.com Vishay Semiconductors
Rev. 1.8, 22-Nov-11 2Document Number: 85764
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PART NUMBER MARKING
CODE
ZENER VOLTAGE
RANGE
TEST
CURRENT
REVERSE
LAEKAGE
CURRENT
DYNAMIC
RESISTANCE
TEMPERATURE
COEFFICIENT
OF ZENER
VOLTAGE
VZ at IZT1 IZT1 IZT2 IR at VRZZ at IZT1 ZZK at IZT2 αVZ at IZT1
VmA μA VΩ10-4/°C
MIN. NOM. MAX. MAX. MAX. MAX. MIN. MAX.
BZX384C2V4-V W1 2.2 2.4 2.6 5 1 50 1 70 (≤ 100) 275 - 9 - 4
BZX384C2V7-V W2 2.5 2.7 2.9 5 1 20 1 75 (≤ 100) 300 (≤ 600) - 9 - 4
BZX384C3V0-V W3 2.8 3.0 3.2 5 1 10 1 80 (≤ 95) 325 (≤ 600) - 9 - 3
BZX384C3V3-V W4 3.1 3.3 3.5 5 1 5 1 85 (≤ 95) 350 (≤ 600) - 8 - 3
BZX384C3V6-V W5 3.4 3.6 3.8 5 1 5 1 85 (≤ 90) 375 (≤ 600) - 8 - 3
BZX384C3V9-V W6 3.7 3.9 4.1 5 1 3 1 85 (≤ 90) 400 (≤ 600) - 7 - 3
BZX384C4V3-V W7 4 4.3 4.6 5 1 3 1 80 (≤ 90) 410 (≤ 600) - 6 - 1
BZX384C4V7-V W8 4.4 4.7 5 5 1 3 2 50 (≤ 80) 425 (≤ 500) - 5 2
BZX384C5V1-V W9 4.8 5.1 5.4 5 1 2 2 40 (≤ 60) 400 (≤ 480) - 3 4
BZX384C5V6-V WA 5.2 5.6 6 5 1 1 2 15 (≤ 40) 80 (≤ 400) - 2 6
BZX384C6V2-V WB 5.8 6.2 6.6 5 1 3 4 6 (≤ 10) 40 (≤ 150) - 1 7
BZX384C6V8-V WC 6.4 6.8 7.2 5 1 2 4 6 (≤ 15) 30 (≤ 80) 2 7
BZX384C7V5-V WD 7 7.5 7.9 5 1 1 5 6 (≤ 15) 30 (≤ 80) 3 7
BZX384C8V2-V WE 7.7 8.2 8.7 5 1 0.7 5 6 (≤ 15) 40 (≤ 80) 4 7
BZX384C9V1-V WF 8.5 9.1 9.6 5 1 0.5 6 6 (≤ 15) 40 (≤ 100) 5 8
BZX384C10-V WG 9.4 10 10.6 5 1 0.2 7 8 (≤ 20) 50 (≤ 150) 5 8
BZX384C11-V WH 10.4 11 11.6 5 1 0.1 8 10 (≤ 20) 50 (≤ 150) 5 9
BZX384C12-V WI 11.4 12 12.7 5 1 0.1 8 10 (≤ 25) 50 (≤ 150) 6 9
BZX384C13-V WK 12.4 13 14.1 5 1 0.1 8 10 (≤ 30) 50 (≤ 170) 7 9
BZX384C15-V WL 13.8 15 15.6 5 1 0.05 0.7 VZnom. 10 (≤ 30) 50 (≤ 200) 7 9
BZX384C16-V WM 15.3 16 17.1 5 1 0.05 0.7 VZnom. 10 (≤ 40) 50 (≤ 200) 8 9.5
BZX384C18-V WN 16.8 18 19.1 5 1 0.05 0.7 VZnom. 10 (≤ 45) 50 (≤ 225) 8 9.5
BZX384C20-V WO 18.8 20 21.2 5 1 0.05 0.7 VZnom. 15 (≤ 55) 60 (≤ 225) 8 10
BZX384C22-V WP 20.8 22 23.3 5 1 0.05 0.7 VZnom. 20 (≤ 55) 60 (≤ 250) 8 10
BZX384C24-V WR 22.8 24 25.6 5 1 0.05 0.7 VZnom. 25 (≤ 70) 60 (≤ 250) 8 10
BZX384C27-V WS 25.1 27 28.9 2 0.5 0.05 0.7 VZnom. 25 (≤ 80) 65 (≤ 300) 8 10
BZX384C30-V WT 28 30 32 2 0.5 0.05 0.7 VZnom. 30 (≤ 80) 70 (≤ 300) 8 10
BZX384C33-V WU 31 33 35 2 0.5 0.05 0.7 VZnom. 35 (≤ 80) 75 (≤ 325) 8 10
BZX384C36-V WW 34 36 38 2 0.5 0.05 0.7 VZnom. 35 (≤ 90) 80 (≤ 350) 8 10
BZX384C39-V WX 37 39 41 2 0.5 0.05 0.7 VZnom. 40 (≤ 130) 80 (≤ 350) 10 12
BZX384C43-V WY 40 43 46 2 0.5 0.05 0.7 VZnom. 45 (≤ 150) 85 (≤ 375) 10 12
BZX384C47-V WZ 44 47 50 2 0.5 0.05 0.7 VZnom. 50 (≤ 170) 85 (≤ 375) 10 12
BZX384C51-V X1 48 51 54 2 0.5 0.05 0.7 VZnom. 60 (≤ 180) 85 (≤ 400) 8 10
BZX384C56-V X2 52 56 60 2 0.5 0.05 0.7 VZnom. 70 (≤ 200) 100 (≤ 425) 10 12
BZX384C62-V X3 58 62 66 2 0.5 0.05 0.7 VZnom. 80 (≤ 215) 100 (≤ 450) 10 12
BZX384C68-V X4 64 68 72 2 0.5 0.05 0.7 VZnom. 90 (≤ 240) 150 (≤ 475) 10 12
BZX384C75-V X5 70 75 79 2 0.5 0.05 0.7 VZnom. 95 (≤ 255) 170 (≤ 500) 10 12
BZX384-V-Series
www.vishay.com Vishay Semiconductors
Rev. 1.8, 22-Nov-11 3Document Number: 85764
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PART NUMBER MARKING
CODE
ZENER VOLTAGE
RANGE
TEST
CURRENT
REVERSE
LEAKAGE
CURRENT
DYNAMIC
RESISTANCE
TEMPERATURE
COEFFICIENT
OF ZENER
VOLTAGE
VZ at IZT1 IZT1 IZT2 IR at VRZZ at IZT1 ZZK at IZT2 αVZ at IZT1
VmA μA VΩ10-4/°C
MIN. NOM. MAX. MAX. MAX. MAX. MIN. MAX.
BZX384B2V4-V W1 2.35 2.4 2.45 5 1 50 1 70 (≤ 100) 275 - 9 - 4
BZX384B2V7-V W2 2.65 2.7 2.75 5 1 20 1 75 (≤ 100) 300 (≤ 600) - 9 - 3
BZX384B3V0-V W3 2.94 3.0 3.06 5 1 10 1 80 (≤ 95) 325 (≤ 600) - 8 - 3
BZX384B3V3-V W4 3.23 3.3 3.37 5 1 5 1 85 (≤ 95) 350 (≤ 600) - 8 - 3
BZX384B3V6-V W5 3.53 3.6 3.67 5 1 5 1 85 (≤ 90) 375 (≤ 600) - 7 - 3
BZX384B3V9-V W6 3.82 3.9 3.98 5 1 3 1 85 (≤ 90) 400 (≤ 600) - 6 - 1
BZX384B4V3-V W7 4.21 4.3 4.39 5 1 3 1 80 (≤ 90) 410 (≤ 600) - 5 2
BZX384B4V7-V W8 4.61 4.7 4.79 5 1 3 2 50 (≤ 80) 425 (≤ 500) - 3 4
BZX384B5V1-V W9 5 5.1 5.2 5 1 2 2 40 (≤ 60) 400 (≤ 480) - 2 6
BZX384B5V6-V WA 5.49 5.6 5.71 5 1 1 2 15 (≤ 40) 80 (≤ 400) - 1 7
BZX384B6V2-V WB 6.08 6.2 6.32 5 1 3 4 6 (≤ 10) 40 (≤ 150) 2 7
BZX384B6V8-V WC 6.66 6.8 6.94 5 1 2 4 6 (≤ 15) 30 (≤ 80) 3 7
BZX384B7V5-V WD 7.35 7.5 7.65 5 1 1 5 6 (≤ 15) 30 (≤ 80) 4 7
BZX384B8V2-V WE 8.04 8.2 8.36 5 1 0.7 5 6 (≤ 15) 40 (≤ 80) 5 8
BZX384B9V1-V WF 8.92 9.1 9.28 5 1 0.5 6 6 (≤ 15) 40 (≤ 100) 5 8
BZX384B10-V WG 9.8 10 10.2 5 1 0.2 7 8 (≤ 20) 50 (≤ 150) 5 9
BZX384B11-V WH 10.8 11 11.2 5 1 0.1 8 10 (≤ 20) 50 (≤ 150) 6 9
BZX384B12-V WI 11.8 12 12.2 5 1 0.1 8 10 (≤ 25) 50 (≤ 150) 7 9
BZX384B13-V WK 12.7 13 13.3 5 1 0.1 8 10 (≤ 30) 50 (≤ 170) 7 9
BZX384B15-V WL 14.7 15 15.3 5 1 0.05 0.7 VZnom. 10 (≤ 30) 50 (≤ 200) 8 9.5
BZX384B16-V WM 15.7 16 16.3 5 1 0.05 0.7 VZnom. 10 (≤ 40) 50 (≤ 200) 8 9.5
BZX384B18-V WN 17.6 18 18.4 5 1 0.05 0.7 VZnom. 10 (≤ 45) 50 (≤ 225) 8 10
BZX384B20-V WO 19.6 20 20.4 5 1 0.05 0.7 VZnom. 15 (≤ 55) 60 (≤ 225) 8 10
BZX384B22-V WP 21.6 22 22.4 5 1 0.05 0.7 VZnom. 20 (≤ 55) 60 (≤ 250) 8 10
BZX384B24-V WR 23.5 24 24.5 5 1 0.05 0.7 VZnom. 25 (≤ 70) 60 (≤ 250) 8 10
BZX384B27-V WS 26.5 27 27.5 2 0.5 0.05 0.7 VZnom. 25 (≤ 80) 65 (≤ 300) 8 10
BZX384B30-V WT 29.4 30 30.6 2 0.5 0.05 0.7 VZnom. 30 (≤ 80) 70 (≤ 300) 8 10
BZX384B33-V WU 32.3 33 33.7 2 0.5 0.05 0.7 VZnom. 35 (≤ 80) 75 (≤ 325) 8 10
BZX384B36-V WW 35.3 36 36.7 2 0.5 0.05 0.7 VZnom. 35 (≤ 90) 80 (≤ 350) 10 12
BZX384B39-V WX 38.2 39 39.8 2 0.5 0.05 0.7 VZnom. 40 (≤ 130) 80 (≤ 350) 10 12
BZX384B43-V WY 42.1 43 43.9 2 0.5 0.05 0.7 VZnom. 45 (≤ 150) 85 (≤ 375) 10 12
BZX384B47-V WZ 46.1 47 47.9 2 0.5 0.05 0.7 VZnom. 50 (≤ 170) 85 (≤ 375) 10 12
BZX384B51-V X1 50 51 52 2 0.5 0.05 0.7 VZnom. 60 (≤ 180) 85 (≤ 400) 10 12
BZX384B56-V X2 54.9 56 57.1 2 0.5 0.05 0.7 VZnom. 70 (≤ 200) 100 (≤ 425) 10 12
BZX384B62-V X3 60.8 62 63.2 2 0.5 0.05 0.7 VZnom. 80 (≤ 215) 100 (≤ 450) 10 12
BZX384B68-V X4 66.6 68 69.4 2 0.5 0.05 0.7 VZnom. 90 (≤ 240) 150 (≤ 475) 10 12
BZX384B75-V X5 73.5 75 76.5 2 0.5 0.05 0.7 VZnom. 95 (≤ 255) 170 (≤ 500) 10 12
BZX384-V-Series
www.vishay.com Vishay Semiconductors
Rev. 1.8, 22-Nov-11 4Document Number: 85764
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Fig. 1 - Forward characteristics
Fig. 2 - Admissible Power Dissipation vs.
Ambient Temperature
Fig. 3 - Dynamic Resistance vs. Zener Current
Fig. 4 - Dynamic Resistance vs. Zener Current
Fig. 5 - Dynamic Resistance vs. Zener Current
Fig. 6 - Thermal Differential Resistance vs. Zener Voltage
18114
mA
10
3
10
2
10
-1
10
-2
10
-3
10
-4
10
-5
10
1
IF
VF
0 0.2 0.4 0.6 0.8 1V
T
J
= 100 °C
T
J
= 25 °C
18192
250
200
150
100
50
0
mW
Ptot
0 100 200 °C
Tamb
18117
1000
5
4
3
2
5
4
3
2
100
1
rzj
0.1 25 25110
IZ
TJ = 25 °C
2.7
5
4
3
2
10
25100 mA
3.6
4.7
5.1
5.6
18119
100
5
4
3
2
5
4
3
2
10
rzj
0.1
25 25
110
I
Z
1
25
100 mA
Ω
T
J
= 25 °C
33
27
22
18
15
12
10
6.8/8.2
6.2
18120
103
7
5
4
3
2
7
5
4
3
2
10
Ω
0.1 2345 2345
110
mA
Rzj
IZ
Tj = 25 °C
47 + 51
43
39
36
102
18121
10
3
5
4
3
2
5
4
3
2
10
2
1
Rzth
5
4
3
2
10
K/W
1
2345 2345
10 100 V
VZ at IZ = 5 mA
negativepositive
Δ
Δ
VZ
Tj
R
zth
= R
thA
x V
Z
x
BZX384-V-Series
www.vishay.com Vishay Semiconductors
Rev. 1.8, 22-Nov-11 5Document Number: 85764
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 7 - Dynamic Resistance vs. Zener Voltage
Fig. 8 - Temperature Dependence of Zener Voltage vs.
Zener Voltage
Fig. 9 - Change of Zener Voltage vs. Junction Temperature
Fig. 10 - Change of Zener Voltage vs. Junction Temperature
Fig. 11 - Temperature Dependence of Zener Voltage vs.
Zener Voltage
Fig. 12 - Change of Zener Voltage from Turn-on up to the Point of
Thermal Equilibrium vs. Zener Voltage
18122
100
7
5
4
3
2
7
5
4
3
2
1
Ω
Rzj
10
T
j
= 25 °C
I
Z
= 5 mA
1
2345 2345
10 100 V
VZ
18135
Δ
25
20
15
10
5
0
- 5
mV/°C
Δ
VZ
Tj
12345 2345
10 100 V
VZ at IZ = 5 mA
V 27 V, I = 2 mA
≥
5 mA
1 mA
20 mA
IZ =
18124
V
Z
at I
Z
= 5 mA
25 15
10
8
7
6.2
5.9
5.6
5.1
4.7
3.6
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
- 1
- 0.2
VZ
V
Tj
020406080
100 120 140 C
Δ
18194
Δ
9
7
5
3
1
- 1
V
VZ
8
6
4
2
0
0100
60
Tj
20 40 120
80 140 °C
I
Z
= 2 mA
51
43
36
V
Z
at I
Z
= 2 mA
18195
Δ
100
80
60
40
20
0
mV/°C
Δ
VZ
Tj
020 40 80
60 100 V
VZ at IZ = 2 mA
IZ = 5 mA
18196
Δ
1.6
1.2
0.8
0.4
0
- 0.4
V
VZ
1.4
1
0.6
0.2
- 0.2
1
2345 2345
10 100 V
VZ at IZ = 5 mA
I
Z
= 5 mA
V
Z
27 V; I
Z
= 2 mA
≥
V
Z
= r
zth
x I
Z
Δ
BZX384-V-Series
www.vishay.com Vishay Semiconductors
Rev. 1.8, 22-Nov-11 6Document Number: 85764
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 13 - Change of Zener Voltage from Turn-on up to the Point of
Thermal Equilibrium vs. Zener Voltage
Fig. 14 - Breakdown Characteristics
Fig. 15 - Breakdown Characteristics
Fig. 16 - Breakdown Characteristics
18160
Δ
5
4
3
2
1
0
V
V
Z
020 40 60 80 100 V
V
Z
at I
Z
= 5 mA
IZ = 5 mA
IZ = 2.5 mA
VZ = rzth x IZ
Δ
18111
Test
current
I
Z
5 mA
123456789
0 10 V
V
Z
3.3
3.9 5.6
2.7
mA
50
40
30
20
10
0
lZ
T
j
= 25 °C
8.2
6.8
4.7
18112
10 20 30
0 40 V
V
Z
mA
30
20
10
0
l
Z
33
Test
current
I
Z
5 mA
T
j
= 25 °C
10
12
15
18
22
27
36
18191
mA
10
8
6
4
2
0
lz
10 20 30 40 50 60 70 80 90
0 100 V
VZ
2 mA
Test Current IZ
Tj = 25 °C
43
51
47
39
BZX384-V-Series
www.vishay.com Vishay Semiconductors
Rev. 1.8, 22-Nov-11 7Document Number: 85764
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE DIMENSIONS in millimeters (inches): SOD-323
Foot print recommendation:
Rev. 5 - Date: 23.Sept.2009
17443
Document no.:S8-V-3910.02-001 (4)
0.6 (0.024)
0.6 (0.024)0.6 (0.024)
1.6 (0.063)
0.10 (0.004)
Cathode bar
0.20 (0.008)
0.40 (0.016)
2.50 (0.098)
1.1 (0.043)
1.5 (0.059)
2.85 (0.112)
1.60 (0.063)
1.95 (0.077)
0.15 (0.006)
0.1 (0.004) max.
1.15 (0.045)
0.8 (0.031)
Created - Date: 24.August.2004
0.40 (0.016)
0.25 (0.010)
0.2 (0.008)
0° to 8°
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
