TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 D Available in 2.5-V, 3-V, 3.3-V, 4.85-V, and 5-V Fixed-Output and Adjustable Versions Integrated Precision Supply-Voltage Supervisor Monitoring Regulator Output Voltage Active-Low Reset Signal with 200-ms Pulse Width Very Low Dropout Voltage . . . Maximum of 35 mV at IO = 100 mA (TPS7350) Low Quiescent Current - Independent of Load . . . 340 A Typ Extremely Low Sleep-State Current, 0.5 A Max 2% Tolerance Over Full Range of Load, Line, and Temperature for Fixed-Output Versions Output Current Range of 0 mA to 500 mA TSSOP Package Option Offers Reduced Component Height For Critical Applications D D D D D D D D D OR P PACKAGE (TOP VIEW) GND EN IN IN 1 8 2 7 3 6 4 5 RESET SENSE/FB OUT OUT PW PACKAGE (TOP VIEW) GND GND GND NC NC EN NC IN IN IN 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 RESET NC NC FB NC SENSE OUT OUT NC NC NC - No internal connection SENSE - Fixed voltage options only (TPS7325, TPS7330, TPS7333, TPS7348, and TPS7350) FB - Adjustable version only (TPS7301) description The TPS73xx devices are members of a family of micropower low-dropout (LDO) voltage regulators. They are differentiated from the TPS71xx and TPS72xx LDOs by their integrated delayed microprocessor-reset function. If the precision delayed reset is not required, the TPS71xx and TPS72xx should be considered. AVAILABLE OPTIONS OUTPUT VOLTAGE (V) NEGATIVE-GOING RESET THRESHOLD VOLTAGE (V) PACKAGED DEVICES TJ MIN - 40C to 125C 125 C TYP MAX MIN TYP MAX SMALL OUTLINE (D) PLASTIC DIP (P) TSSOP (PW) CHIP FORM (Y) 4.9 5 5.1 4.55 4.65 4.75 TPS7350QD TPS7350QP TPS7350QPW TPS7350Y 4.75 4.85 4.95 4.5 4.6 4.7 TPS7348QD TPS7348QP TPS7348QPW TPS7348Y 3.23 3.3 3.37 2.868 2.934 3 TPS7333QD TPS7333QP TPS7333QPW TPS7333Y 2.94 3 3.06 2.58 2.64 2.7 TPS7330QD TPS7330QP TPS7330QPW TPS7330Y 2.425 2.5 2.575 2.23 2.32 2.39 TPS7325QD TPS7325QP TPS7325QPW TPS7325Y TPS7301QD TPS7301QP TPS7301QPW TPS7301Y Adjustable 1.2 V to 9.75 V 1.101 1.123 1.145 The D and PW packages are available taped and reeled. Add an R suffix to device type (e.g., TPS7350QDR). The TPS7301Q is programmable using an external resistor divider (see application information). The chip form is tested at 25C. The TPS7325 has a tolerance of 3% over the full temperature range. The TPS71xx and the TPS72xx are 500-mA and 250-mA output regulators respectively, offering performance similar to that of the TPS73xx but without the delayed-reset function. The TPS72xx devices are further differentiated by availability in 8-pin thin-shrink small-outline packages (TSSOP) for applications requiring minimum package size. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 1999, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 description (continued) The RESET output of the TPS73xx initiates a reset in microcomputer and microprocessor systems in the event of an undervoltage condition. An internal comparator in the TPS73xx monitors the output voltage of the regulator to detect an undervoltage condition on the regulated output voltage. If that occurs, the RESET output (open-drain NMOS) turns on, taking the RESET signal low. RESET stays low for the duration of the undervoltage condition. Once the undervoltage condition ceases, a 200-ms (typ) time-out begins. At the completion of the 200-ms delay, RESET goes high. An order of magnitude reduction in dropout voltage and quiescent current over conventional LDO performance is achieved by replacing the typical pnp pass transistor with a PMOS device. Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (maximum of 35 mV at an output current of 100 mA for the TPS7350) and is directly proportional to the output current (see Figure 1). Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is low and remains constant, independent of output loading (typically 340 A over the full range of output current, 0 mA to 500 mA). These two key specifications yield a significant improvement in operating life for battery-powered systems. The LDO family also features a sleep mode; applying a logic high signal to EN (enable) shuts down the regulator, reducing the quiescent current to 0.5 A maximum at TJ = 25C. The TPS73xx is offered in 2.5-V, 3-V, 3.3-V, 4.85-V, and 5-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.2 V to 9.75 V). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges (3% for the 2.5 V and the adjustable version). The TPS73xx family is available in PDIP (8 pin), SO (8 pin) and TSSOP (20 pin) packages. The TSSOP has a maximum height of 1.2 mm. 0.3 TPS73xxPW TA = 25C TPS7330 0.25 Dropout Voltage - V TPS7333 0.2 8 VI IN RESET IN SENSE 9 TPS7325 IN 0.15 To System Reset 15 10 0.1 F 20 OUT 6 EN OUT TPS7348 250 k 14 VO 13 + GND 0.1 1 TPS7350 2 3 CO 10 F CSR = 1 0.05 0 0 50 100 150 200 250 300 350 400 450 500 IO - Output Current - mA Figure 1. Dropout Voltage Versus Output Current 2 POST OFFICE BOX 655303 TPS7325, TPS7330, TPS7333, TPS7348, TPS7350 (fixed-voltage options) Capacitor selection is nontrivial. See application information section for details. Figure 2. Typical Application Configuration * DALLAS, TEXAS 75265 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 TPS73xxY chip information These chips, when properly assembled, display characteristics similar to those of the TPS73xxQ. Thermal compression or ultrasonic bonding may be used on the doped aluminum bonding pads. Chips may be mounted with conductive epoxy or a gold-silicon preform. BONDING PAD ASSIGNMENTS (5) IN (5) (3) (4) (6) EN (2) (6) TPS73xx (4) (7) SENSE FB OUT RESET (1) (7) GND CHIP THICKNESS: 15 TYPICAL 80 BONDING PADS: 4 x 4 MINIMUM TJmax = 150C TOLERANCES ARE 10%. ALL DIMENSIONS ARE IN MILS. SENSE - Fixed voltage options only (TPS7325, TPS7330, TPS7333, TPS7348, and TPS7350) FB - Adjustable version only (TPS7301) (3) (1) (2) NOTE A. For most applications, OUT and SENSE should be tied together as close as possible to the device; for other implementations, refer to SENSE-pin connection discussion in the applications information section of this data sheet. 92 functional block diagram IN RESISTOR DIVIDER OPTIONS EN RESET _ + OUT Vref + _ Delayed Reset DEVICE R1 R2 UNIT TPS7301 TPS7325 TPS7330 TPS7333 TPS7348 TPS7350 0 260 358 420 726 756 233 233 233 233 233 k k k k k NOTE A. Resistors are nominal values only. SENSE/FB R1 R2 COMPONENT COUNT MOS transistors Bilpolar transistors Diodes Capacitors Resistors 464 41 4 17 76 GND For most applications, SENSE should be externally connected to OUT as close as possible to the device. For other implementations, refer to SENSE-pin connection discussion in applications information section. Switch positions are shown with EN low (active). POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 3 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 timing diagram VI Vres Vres t VO VIT + VIT + Threshold Voltage VIT - VIT - t RESET Output Output Undefined II II II II II 200 ms Delay 200 ms Delay II II II II II Output Undefined t Vres is the minimum input voltage for a valid RESET. The symbol Vres is not currently listed within EIA or JEDEC standards for semiconductor symbology. absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Input voltage range, VI, RESET, SENSE, EN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 0.3 V to 11 V Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 A Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Tables 1 and 2 Operating virtual junction temperature range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 55C to 150C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65C to 150C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. All voltage values are with respect to network terminal ground. 4 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 DISSIPATION RATING TABLE 1 - FREE-AIR TEMPERATURE (SEE FIGURE 3) TA 25C POWER RATING DERATING FACTOR ABOVE TA = 25C TA = 70C POWER RATING TA = 125C POWER RATING D 725 mW 5.8 mW/C 464 mW 145 mW P 1175 mW 9.4 mW/C 752 mW 235 mW PW 700 mW 5.6 mW/C 448 mW 140 mW PACKAGE DISSIPATION RATING TABLE 2 - CASE TEMPERATURE (SEE FIGURE 4) PACKAGE TC 25C POWER RATING D P DERATING FACTOR ABOVE TC = 25C TC = 70C POWER RATING TC = 125C POWER RATING 2188 mW 9.4 mW/C 1765 mW 1248 mW 2738 mW 21.9 mW/C 1752 mW 548 mW PW 4025 mW 32.2 mW/C 2576 mW 805 mW Refer to Thermal Information section for detailed power dissipation considerations when using the TSSOP package. MAXIMUM CONTINUOUS DISSIPATION vs CASE TEMPERATURE MAXIMUM CONTINUOUS DISSIPATION vs FREE-AIR TEMPERATURE 4800 1200 1000 P Package RJA = 106C/W 800 D Package RJA = 172C/W 600 400 PW Package RJA = 178C/W 200 PD - Maximum Continuous Dissipation - mW PD - Maximum Continuous Dissipation - mW 1400 4400 4000 PW Package RJC = 37C/W 3600 3200 2800 P Package RJC = 46C/W 2400 2000 1600 1200 D Package RJC = 57C/W 800 400 0 0 25 50 75 100 125 150 25 50 75 100 125 150 TC - Case Temperature - C TA - Free-Air Temperature - C Figure 3 Figure 4 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 5 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 recommended operating conditions Input voltage, voltage VI MIN MAX TPS7301Q 2.47 10 TPS7325Q 3.1 10 TPS7330Q 3.5 10 TPS7333Q 3.77 10 TPS7348Q 5.2 10 TPS7350Q 5.33 10 High-level input voltage at EN, VIH 2 Low-level input voltage at EN, VIL Output current range, IO 0 UNIT V V V V 0.5 V 500 mA Operating virtual junction temperature range, TJ - 40 125 C Minimum input voltage defined in the recommended operating conditions is the maximum specified output voltage plus dropout voltage, VDO, at the maximum specified load range. Since dropout voltage is a function of output current, the usable range can be extended for lighter loads. To calculate the minimum input voltage for the maximum load current used in a given application, use the following equation: V V V I(min) O(max) DO(max load) Because the TPS7301 is programmable, rDS(on) should be used to calculate VDO before applying the above equation. The equation for calculating VDO from rDS(on) is given in Note 2 in the TPS7301 electrical characteristics table. The minimum value of 2.97 V is the absolute lower limit for the recommended input voltage range for the TPS7301. + 6 ) POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 electrical characteristics at IO = 10 mA, EN = 0 V, Co = 4.7 F (CSR = 1 ), SENSE/FB shorted to OUT (unless otherwise noted) TEST CONDITIONS PARAMETER Ground current (active mode) EN 0.5 V, 0 mA IO 500 mA Input current (standby mode) EN = VI, 2 7 V VI 10 V 2.7 Output current limit VO = 0 V V, VI = 10 V Pass-element leakage g current in standby y mode EN = VI, 2 7 V VI 10 V 2.7 RESET leakage current Normal operation, operation V at RESET = 10 V TJ MIN 25C VI = VO + 1 V, EN logic low (active mode) 25C 0.01 0.5 2 25C 1.2 - 40C to 125C 2 2 25C 0.01 - 40C to 125C 0.5 1 0.02 - 40C to 125C 0.5 0.5 - 40C to 125C 61 75 2.5 V VI 6 V 6 V VI 10 V 2 7 V VI 10 V 2.7 - 40C to 125C 2 25C 0.5 - 40C to 125C 0.5 0 V VI 10 V 50 25C - 0.5 - 40C to 125C - 0.5 25C 0.001 25C - 40C to 125C A A A A ppm/C 2.05 2.5 2.5 1 V mV 0.5 0.5 - 40C to 125C IO(RESET) = - 300 A A V 2.7 25C UNIT C 165 Minimum VI for active pass element Minimum VI for valid RESET 400 - 40C to 125C EN hysteresis voltage EN input current 340 550 Thermal shutdown junction temperature EN logic high (standby mode) MAX - 40C to 125C 25C Output voltage temperature coefficient TYP 1.5 1.9 A V V CSR (compensation series resistance) refers to the total series resistance, including the equivalent series resistance (ESR) of the capacitor, any series resistance added externally, and PWB trace resistance to Co. Pulse-testing techniques are used to maintain virtual junction temperature as close as possible to ambient temperature; thermal effects must be taken into account separately. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 7 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 TPS7301Q electrical characteristics at IO = 10 mA, VI = 3.5 V, EN = 0 V, Co = 4.7 F (CSR = 1 ), FB shorted to OUT at device leads (unless otherwise noted) TEST CONDITIONS PARAMETER Reference voltage (measured at FB) 2.5 V VI 10 V, See Note 1 5 mA IO 500 mA, Reference voltage temperature coefficient Pass-element series resistance (See Note 2) Input regulation Output regulation Output noise voltage TYP 1.147 - 40C to 125C 61 75 25C 0.7 1 150 mA IO 500 mA VI = 2 2.9 9V V, 50 A IO 500 mA VI = 3.9 V, VI = 5.9 V, 50 A IO 500 mA 25C 0.32 50 A IO 500 mA 25C 0.23 VI = 2.5 V to 10 V,, See Note 1 50 A IO 500 mA,, 25C 3 2.5 V VI 10 V,, See Note 1 IO = 5 mA to 500 mA,, 2.5 V VI 10 V,, See Note 1 IO = 50 A to 500 mA,, - 40C to 125C 10 Hz f 100 kHz RESET trip-threshold voltage VO(FB) decreasing RESET hysteresis voltage Measured at VO(FB) 25C RESET output low voltage VI = 2 2.13 13 V, V 0.83 0.52 - 40C to 125C 18 25 25C 5 - 40C to 125C 14 25 25C 7 - 40C to 125C 22 54 25C 48 - 40C to 125C 44 25C 45 - 40C to 125C 44 2 25C 95 Co = 10 F 25C 89 Co = 100 F 25C 74 1.101 12 25C 0.1 - 40C to 125C Vrms - 20 0.1 V mV 0.4 0.4 - 10 mV V/Hz 1.145 25C 25C mV dB 54 25C - 40C to 125C mV 59 Co = 4.7 F FB input current 0.85 0.85 - 40C to 125C IO(RESET) = 400 A ppm/C 1.3 1.3 25C - 40C to 125C V 1 - 40C to 125C f = 120 Hz UNIT V 1.217 VI = 2 2.4 4V V, f = 120 Hz MAX 1.182 50 A IO 150 mA IO = 500 mA,, See Note 1 Output noise-spectral density - 40C to 125C MIN VI = 2 2.4 4V V, IO = 50 A Ripple rejection TJ 25C 10 20 V nA CSR refers to the total series resistance, including the ESR of the capacitor, any series resistance added externally, and PWB trace resistance to Co. Pulse-testing techniques are used to maintain virtual junction temperature as close as possible to ambient temperature; thermal effects must be taken into account separately. Output voltage programmed to 2.5 V with closed-loop configuration (see application information). NOTES: 1. When VI < 2.9 V and IO > 150 mA simultaneously, pass element rDS(on) increases (see Figure 33) to a point where the resulting dropout voltage prevents the regulator from maintaining the specified tolerance range. 2. To calculate dropout voltage, use equation: VDO = IO rDS(on) rDS(on) is a function of both output current and input voltage. This parametric table lists rDS(on) for VI = 2.4 V, 2.9 V, 3.9 V, and 5.9 V, which corresponds to dropout conditions for programmed output voltages of 2.5 V, 3 V, 4 V, and 6 V respectively. For other programmed values, refer to Figure 33. 8 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 TPS7325Q electrical characteristics at IO = 10 mA, VI = 3.5 V, EN = 0 V, Co = 10 F (CSR = 1 ), SENSE shorted to OUT (unless otherwise noted) TEST CONDITIONS PARAMETER Output voltage Dropout voltage 3.5 V VI 10 V, 5 mA IO 500 mA IO = 10 mA mA, 97 V VI = 2 2.97 IO = 100 mA, mA VI = 2 2.97 97 V IO = 500 mA, mA VI = 2 2.97 97 V Pass element series resistance Pass-element ( (2.97 V - VO))/IO, IO = 500 mA VI = 2.97 V,, Input regulation VI = 3.5 3 5 V to 10 V, V 50 A IO 500 mA mA IO = 5 mA to 500 mA, 3 5 V VI 10 V 3.5 IO = 50 A to 500 mA mA, 3 5 V VI 10 V 3.5 IO = 50 A f = 120 Hz IO = 500 mA Output noise-spectral density f = 120 Hz Output noise voltage 10 Hz f 100 kHz RESET trip-threshold voltage VO decreasing RESET output low voltage VI = 2 2.1 1V V, MIN TYP 2.45 2.5 - 40C to 125C 2.425 25C 50 - 40C to 125C 25C 270 - 40C to 125C 0.5 400 0.7 1.4 25C 6 - 40C to 125C 20 25 25C 20 - 40C to 125C 32 50 25C 28 - 40C to 125C 60 100 25C 50 - 40C to 125C 49 25C 49 - 40C to 125C 32 mV mV mV dB 53 Co = 4.7 F 25C 274 Co = 10 F 25C 228 25C 53 2 25C mV 600 25C - 40C to 125C 80 150 25C IO(RESET) = - 0.8 0 8 mA V 14 25C - 40C to 125C 2.55 UNIT 5 - 40C to 125C Co = 100 F MAX 2.575 - 40C to 125C Output regulation Ripple rejection TJ 25C V/Hz Vrms 159 2.23 2.32 2.39 0.14 0.4 0.4 V V CSR refers to the total series resistance, including the ESR of the capacitor, any series resistance added externally, and PWB trace resistance to Co. Pulse-testing techniques are used to maintain virtual junction temperature as close as possible to ambient temperature; thermal effects must be taken into account separately. Dropout test and pass-element series resistance test are not production tested. Test method requires SENSE terminal to be disconnected from output voltage. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 9 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 TPS7330Q electrical characteristics at IO = 10 mA, VI = 4 V, EN = 0 V, Co = 4.7 F (CSR = 1 ), SENSE shorted to OUT (unless otherwise noted) TEST CONDITIONS PARAMETER Output voltage 4 V VI 10 V, 5 mA IO 500 mA mA IO = 10 mA, 94 V VI = 2 2.94 IO = 100 mA, mA VI = 2 2.94 94 V IO = 500 mA, mA VI = 2 2.94 94 V Pass element series resistance Pass-element ( (2.94 V - VO)/I ) O, IO = 500 mA VI = 2.94 V,, Input regulation VI = 4 V to 10 V, V 50 A IO 500 mA mA IO = 5 mA to 500 mA, 4 V VI 10 V IO = 50 A to 500 mA, mA 4 V VI 10 V Dropout voltage IO = 50 A f = 120 Hz IO = 500 mA Output noise-spectral density f = 120 Hz Output noise voltage 10 Hz f 100 kHz RESET trip-threshold voltage VO decreasing RESET output low voltage VI = 2 2.6 6V V, MIN - 40C to 125C 2.94 TYP 25C 3.06 5.2 - 40C to 125C 52 - 40C to 125C 25C 267 25C 0.5 6 - 40C to 125C 0.7 23 29 25C 20 - 40C to 125C 32 60 25C 28 - 40C to 125C 60 120 25C 43 - 40C to 125C 40 25C 39 - 40C to 125C 36 mV mV mV dB 53 Co = 4.7 F 25C 274 Co = 10 F 25C 228 25C 53 2 25C mV 450 1 25C - 40C to 125C 75 500 25C IO(RESET) = - 0.8 0 8 mA V 7 100 - 40C to 125C - 40C to 125C UNIT 10 25C Co = 100 F MAX 3 - 40C to 125C Output regulation Ripple rejection TJ 25C V/Hz Vrms 159 2.58 2.64 2.7 0.14 0.4 0.4 V V CSR refers to the total series resistance, including the ESR of the capacitor, any series resistance added externally, and PWB trace resistance to Co. Pulse-testing techniques are used to maintain virtual junction temperature as close as possible to ambient temperature; thermal effects must be taken into account separately. 10 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 TPS7333Q electrical characteristics at IO = 10 mA, VI = 4.3 V, EN = 0 V, Co = 4.7 F (CSR = 1 ), SENSE shorted to OUT (unless otherwise noted) TEST CONDITIONS PARAMETER Output voltage 4.3 V VI 10 V, 5 mA IO 500 mA IO = 10 mA mA, 23 V VI = 3 3.23 IO = 100 mA, mA VI = 3 3.23 23 V IO = 500 mA, mA VI = 3 3.23 23 V Pass element series resistance Pass-element ( (3.23 V - VO)/I ) O, IO = 500 mA VI = 3.23 V,, Input regulation VI = 4.3 4 3 V to 10 V, V 50 A IO 500 mA Dropout voltage Output regulation IO = 50 A to 500 mA mA, 4 4.3 3 V VI 10 V IO = 50 A f = 120 Hz IO = 500 mA Output noise-spectral density f = 120 Hz Output noise voltage 10 Hz f 100 kHz RESET trip-threshold voltage VO decreasing MIN - 40C to 125C 3.23 4.5 7 44 60 - 40C to 125C 80 25C 235 - 40C to 125C 25C 0.44 mV 300 0.6 0.8 25C 6 - 40C to 125C 23 29 25C 21 - 40C to 125C 38 75 25C 31 - 40C to 125C 60 120 25C 43 - 40C to 125C 40 25C 39 - 40C to 125C 36 mV mV mV dB 49 Co = 4.7 F 25C 274 Co = 10 F 25C 228 25C 51 2 V/Hz Vrms 159 2.868 V 25C 18 25C 0.17 - 40C to 125C V 400 25C IO(RESET) = - 1 mA UNIT 8 25C RESET hysteresis voltage VI = 2 2.8 8V V, 3.37 - 40C to 125C - 40C to 125C MAX 3.3 25C Co = 100 F RESET output low voltage TYP - 40C to 125C 3 V VI 10 V IO = 5 mA to 500 mA mA, 4 4.3 Ripple rejection TJ 25C mV 0.4 0.4 V CSR refers to the total series resistance, including the ESR of the capacitor, any series resistance added externally, and PWB trace resistance to Co. Pulse-testing techniques are used to maintain virtual junction temperature as close as possible to ambient temperature; thermal effects must be taken into account separately. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 11 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 TPS7348Q electrical characteristics at IO = 10 mA, VI = 5.85 V, EN = 0 V, Co = 4.7 F (CSR = 1 ), SENSE shorted to OUT (unless otherwise noted) TEST CONDITIONS PARAMETER Output voltage 5.85 V VI 10 V, 5 mA IO 500 mA IO = 10 mA mA, 75 V VI = 4 4.75 IO = 100 mA, mA VI = 4 4.75 75 V IO = 500 mA, mA VI = 4 4.75 75 V Pass element series resistance Pass-element ( (4.75 V - VO)/I ) O, IO = 500 mA VI = 4.75 V,, Input regulation VI = 5 5.85 85 V to 10 V V, 50 A IO 500 mA Dropout voltage Output regulation IO = 50 A to 500 mA mA, 5 5.85 85 V VI 10 V IO = 50 A f = 120 Hz IO = 500 mA Output noise-spectral density MIN - 40C to 125C 4.75 10 Hz f 100 kHz RESET trip-threshold voltage VO decreasing 2.9 6 28 37 - 40C to 125C 54 25C 150 - 40C to 125C 0.28 25C 9 - 40C to 125C 0.37 35 37 25C 28 - 40C to 125C 42 80 25C 42 - 40C to 125C 65 130 25C 42 - 40C to 125C 39 25C 39 - 40C to 125C 35 mV mV mV dB 50 2 25C 410 Co = 10 F 25C 328 25C 53 Co = 4.7 F V/Hz Vrms 212 4.5 4.7 25C 26 25C 0.2 - 40C to 125C mV 180 0.52 25C IO(RESET) = - 1.2 1 2 mA,V mA VI = 4.12 4 12 V V 250 25C - 40C to 125C UNIT 8 25C RESET hysteresis voltage RESET output low voltage 4.95 - 40C to 125C Co = 100 F MAX 4.85 25C f = 120 Hz Output noise voltage TYP - 40C to 125C 85 V VI 10 V IO = 5 mA to 500 mA mA, 5 5.85 Ripple rejection TJ 25C V mV 0.4 0.4 V CSR refers to the total series resistance, including the ESR of the capacitor, any series resistance added externally, and PWB trace resistance to Co. Pulse-testing techniques are used to maintain virtual junction temperature as close as possible to ambient temperature; thermal effects must be taken into account separately. 12 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 TPS7350Q electrical characteristics at IO = 10 mA, VI = 6 V, EN = 0 V, Co = 4.7 F (CSR = 1 ), SENSE shorted to OUT (unless otherwise noted) TEST CONDITIONS PARAMETER Output voltage 6 V VI 10 V, 5 mA IO 500 mA IO = 10 mA mA, 88 V VI = 4 4.88 IO = 100 mA, mA VI = 4 4.88 88 V IO = 500 mA, mA VI = 4 4.88 88 V Pass element series resistance Pass-element ( (4.88 V - VO)/I ) O, IO = 500 mA VI = 4.88 V,, Input regulation VI = 6 V to 10 V, V 50 A IO 500 mA mA IO = 5 mA to 500 mA, 6 V VI 10 V IO = 50 A to 500 mA mA, 6 V VI 10 V Dropout voltage IO = 50 A f = 120 Hz IO = 500 mA Output noise-spectral density f = 120 Hz Output noise voltage 10 Hz f 100 kHz RESET trip-threshold voltage VO decreasing MIN - 40C to 125C 4.9 5.1 2.9 6 27 35 - 40C to 125C - 40C to 125C 50 25C 146 - 40C to 125C 0.27 25C 4 - 40C to 125C 0.35 25 45 25C 30 - 40C to 125C 45 86 25C 45 - 40C to 125C 65 140 25C 43 - 40C to 125C 38 25C 41 - 40C to 125C 36 mV mV mV dB 51 Co = 4.7 F 25C 430 Co = 10 F 25C 345 25C 53 2 V/Hz Vrms 220 4.55 4.75 25C 28 25C 0.15 - 40C to 125C mV 170 0.5 25C IO(RESET) = - 1.2 1 2 mA, mA VI = 4.25 4 25 V V 230 25C RESET hysteresis voltage UNIT 8 25C - 40C to 125C MAX 5 25C Co = 100 F RESET output low voltage TYP - 40C to 125C Output regulation Ripple rejection TJ 25C V mV 0.4 0.4 V CSR refers to the total series resistance, including the ESR of the capacitor, any series resistance added externally, and PWB trace resistance to Co. Pulse-testing techniques are used to maintain virtual junction temperature as close as possible to ambient temperature; thermal effects must be taken into account separately. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 13 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 switching characteristics PARAMETER RESET time-out time out delay TJ TEST CONDITIONS See Figure 5 TPS7301Q, TPS7333Q TPS7348Q, TPS7350Q MIN TYP MAX 25C 140 200 260 - 40C to 125C 100 300 UNIT ms electrical characteristics at IO = 10 mA, EN = 0 V, Co = 4.7 F (CSR = 1 ), TJ = 25C, SENSE/FB shorted to OUT (unless otherwise noted) TEST CONDITIONS PARAMETER TPS7301Y, TPS7333Y TPS7348Y, TPS7350Y MIN TYP UNIT MAX Ground current (active mode) EN 0.5 V, 0 mA IO 500 mA VI = VO + 1 V, 340 A Input current (standby mode) EN = VI, 2.7 V VI 10 V 0.01 A Output current limit VO = 0 V, VI = 10 V 1.2 A Pass-element leakage current in standby mode EN = VI, 2.7 V VI 10 V 0.01 A RESET leakage current Normal operation, V at RESET = 10 V 0.02 A Thermal shutdown junction temperature EN logic low (active mode) EN hysteresis voltage EN input current C 165 2.7 V VI 10 V 0 V VI 10 V Minimum VI for active pass element 0.5 V 50 mV 0.001 A 2.05 V IO(RESET) = - 300 A 1 V Minimum VI for valid RESET CSR (compensation series resistance) refers to the total series resistance, including the equivalent series resistance (ESR) of the capacitor, any series resistance added externally, and PWB trace resistance to Co. Pulse-testing techniques are used to maintain virtual junction temperature as close as possible to ambient temperature; thermal effects must be taken into account separately. 14 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 TPS7301Y electrical characteristics at IO = 10 mA, VI = 3.5 V, EN = 0 V, Co = 4.7 F (CSR = 1 ), TJ = 25C, FB shorted to OUT at device leads (unless otherwise noted) TEST CONDITIONS PARAMETER Reference voltage (measured at FB) MIN TYP 1.182 MAX UNIT V VI = 2.4 V, VI = 2.4 V, 50 A IO 150 mA 150 mA IO 500 mA 0.83 VI = 2.9 V, VI = 3.9 V, 50 A IO 500 mA 0.52 50 A IO 500 mA 0.32 VI = 5.9 V, VI = 2.5 V to 10 V, See Note 1 50 A IO 500 mA 0.23 50 A IO 500 mA, 3 mV 2.5 V VI 10 V, See Note 1 IO = 5 mA to 500 mA, 5 mV 2.5 V VI 10 V, See Note 1 IO = 50 A to 500 mA, 7 mV Ripple rejection f = 120 Hz IO = 50 A IO = 500 mA, See Note 1 Output noise-spectral density f = 120 Hz Output noise voltage 10 Hz f 100 kHz RESET hysteresis voltage Measured at VO(FB) RESET output low voltage VI = 2.13 V, Pass-element series resistance (See Note 2) Input regulation Output regulation 0.7 59 54 2 Co = 4.7 F 95 Co = 10 F 89 Co = 100 F 74 IO(RESET) = 400 A FB input current dB V/Hz Vrms 12 mV 0.1 V 0.1 nA CSR refers to the total series resistance, including the ESR of the capacitor, any series resistance added externally, and PWB trace resistance to Co. Pulse-testing techniques are used to maintain virtual junction temperature as close as possible to ambient temperature; thermal effects must be taken into account separately. Output voltage programmed to 2.5 V with closed-loop configuration (see application information). NOTES: 1. When VI < 2.9 V and IO > 150 mA simultaneously, pass element rDS(on) increases (see Figure 33) to a point where the resulting dropout voltage prevents the regulator from maintaining the specified tolerance range. 2. To calculate dropout voltage, use equation: VDO = IO rDS(on) rDS(on) is a function of both output current and input voltage. The parametric table lists rDS(on) for VI = 2.4 V, 2.9 V, 3.9 V, and 5.9 V, which corresponds to dropout conditions for programmed output voltages of 2.5 V, 3 V, 4 V, and 6 V respectively. For other programmed values, refer to Figure 33. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 15 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 TPS7325Y electrical characteristics at IO = 10 mA, VI = 3.5 V, EN = 0 V, Co = 10 F (CSR = 1 ), TJ = 25C, SENSE shorted to OUT (unless otherwise noted) TEST CONDITIONS PARAMETER Output voltage VI = 2.97 V VI = 2.97 V IO = 500 mA, (2.97 V - VO)/IO, IO = 500 mA VI = 2.97 V VI = 2.97 V, VI = 3.5 V to 10 V, IO = 5 mA to 500 mA, 50 A IO 500 mA IO = 50 A to 500 mA, Ripple rejection f = 120 Hz Output noise-spectral density f = 120 Hz Output noise voltage 10 Hz f 100 kHz Pass-element series resistance Input regulation Output regulation TYP 2.5 IO = 10 mA, IO = 100 mA, Dropout voltage MIN MAX UNIT V 5 50 mV 270 0.5 6 mV 3.5 V VI 10 V 20 mV 3.5 V VI 10 V 28 mV IO = 50 A IO = 500 mA 53 53 2 Co = 4.7 F 274 Co = 10 F 228 Co = 100 F 159 dB V/Hz Vrms VI = 2.1 V, IO(RESET) = - 0.8 mA 0.14 V RESET output low voltage CSR refers to the total series resistance, including the ESR of the capacitor, any series resistance added externally, and PWB trace resistance to Co. Pulse-testing techniques are used to maintain virtual junction temperature as close as possible to ambient temperature; thermal effects must be taken into account separately. Dropout test and pass-element series resistance test are not production tested. Test method requires SENSE terminal to be disconnected from output voltage. 16 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 TPS7330Y electrical characteristics at IO = 10 mA, VI = 4 V, EN = 0 V, Co = 4.7 F (CSR = 1 ), TJ = 25C, SENSE shorted to OUT (unless otherwise noted) TEST CONDITIONS PARAMETER MIN Output voltage TYP MAX 3 IO = 10 mA, IO = 100 mA, VI = 2.94 V VI = 2.94 V 5.2 IO = 500 mA, (2.94 V - VO)/IO, IO = 500 mA VI = 2.94 V VI = 2.94 V, 267 VI = 4 V to 10 V, IO = 5 mA to 500 mA, 50 A IO 500 mA IO = 50 A to 500 mA, Ripple rejection f = 120 Hz Output noise-spectral density f = 120 Hz Output noise voltage 10 Hz f 100 kHz Dropout voltage Pass-element series resistance Input regulation Output regulation UNIT V mV 52 0.5 6 mV 4 V VI 10 V 20 mV 4 V VI 10 V 28 mV IO = 50 A IO = 500 mA 53 dB 53 V/Hz 2 Co = 4.7 F 274 Co = 10 F 228 Co = 100 F 159 Vrms VI = 2.6 V, IO(RESET) = - 0.8 mA 0.14 V RESET output low voltage CSR refers to the total series resistance, including the ESR of the capacitor, any series resistance added externally, and PWB trace resistance to Co. Pulse-testing techniques are used to maintain virtual junction temperature as close as possible to ambient temperature; thermal effects must be taken into account separately. TPS7333Y electrical characteristics at IO = 10 mA, VI = 4.3 V, EN = 0 V, Co = 4.7 F (CSR = 1 ), TJ = 25C, SENSE shorted to OUT (unless otherwise noted) TEST CONDITIONS PARAMETER Output voltage MIN TYP 3.3 MAX UNIT V IO = 10 mA, IO = 100 mA, VI = 3.23 V VI = 3.23 V 4.5 IO = 500 mA, (3.23 V - VO)/IO, IO = 500 mA VI = 3.23 V VI = 3.23 V, 235 VI = 4.3 V to 10 V, IO = 5 mA to 500 mA, 50 A IO 500 mA 6 mV 4.3 V VI 10 V 21 mV IO = 50 A to 500 mA, 4.3 V VI 10 V 31 mV Ripple rejection f = 120 Hz IO = 50 A IO = 500 mA 51 Output noise-spectral density f = 120 Hz Output noise voltage 10 Hz f 100 kHz Dropout voltage Pass-element series resistance Input regulation Output regulation 44 0.44 49 2 Co = 4.7 F 274 Co = 10 F 228 Co = 100 F 159 18 RESET hysteresis voltage mV dB V/Hz Vrms mV VI = 2.8 V, IO(RESET) = - 1 mA 0.17 V RESET output low voltage CSR refers to the total series resistance, including the ESR of the capacitor, any series resistance added externally, and PWB trace resistance to Co. Pulse-testing techniques are used to maintain virtual junction temperature as close as possible to ambient temperature; thermal effects must be taken into account separately. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 17 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 TPS7348Y electrical characteristics at IO = 10 mA, VI = 5.85 V, EN = 0 V, Co = 4.7 F (CSR = 1 ), TJ = 25C, SENSE shorted to OUT (unless otherwise noted) TEST CONDITIONS PARAMETER Output voltage MIN TYP 4.85 IO = 10 mA, IO = 100 mA, VI = 4.75 V VI = 4.75 V 2.9 IO = 500 mA, (4.75 V - VO)/IO, IO = 500 mA VI = 4.75 V VI = 4.75 V, 150 VI = 5.85 V to 10 V, IO = 5 mA to 500 mA, 50 A IO 500 mA IO = 50 A to 500 mA, Ripple rejection f = 120 Hz Output noise-spectral density f = 120 Hz Output noise voltage 10 Hz f 100 kHz Dropout voltage Pass-element series resistance Input regulation Output regulation 28 0.28 MAX UNIT V mV 9 mV 5.85 V VI 10 V 28 mV 5.85 V VI 10 V 42 mV IO = 50 A IO = 500 mA 53 50 2 Co = 4.7 F 410 Co = 10 F 328 Co = 100 F 212 26 RESET hysteresis voltage dB V/Hz Vrms mV IO(RESET) = - 1.2 mA, VI = 4.12 V 0.2 V RESET output low voltage CSR refers to the total series resistance, including the ESR of the capacitor, any series resistance added externally, and PWB trace resistance to Co. Pulse-testing techniques are used to maintain virtual junction temperature as close as possible to ambient temperature; thermal effects must be taken into account separately. 18 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 TPS7350Y electrical characteristics at IO = 10 mA, VI = 6 V, EN = 0 V, Co = 4.7 F (CSR = 1 ), TJ = 25C, SENSE shorted to OUT (unless otherwise noted) TEST CONDITIONS PARAMETER Output voltage MIN TYP MAX 5 UNIT V IO = 10 mA, IO = 100 mA, VI = 4.88 V VI = 4.88 V 2.9 6 27 35 IO = 500 mA, (4.88 V - VO)/IO, IO = 500 mA VI = 4.88 V VI = 4.88 V, 146 170 0.27 0.35 VI = 6 V to 10 V, IO = 5 mA to 500 mA, 50 A IO 500 mA 4 25 mV 6 V VI 10 V 28 75 mV IO = 50 A to 500 mA, 6 V VI 10 V 41 Ripple rejection f = 120 Hz IO = 50 A IO = 500 mA 53 Output noise-spectral density f = 120 Hz Output noise voltage 10 Hz f 100 kHz Dropout voltage Pass-element series resistance Input regulation Output regulation 430 345 Co = 100 F 220 V/Hz Vrms 28 RESET hysteresis voltage RESET output low voltage dB 2 Co = 10 F IO(RESET) = - 1.2 mA, VI = 4.25 V 0.15 mV 51 Co = 4.7 F mV mV 0.4 V CSR refers to the total series resistance, including the ESR of the capacitor, any series resistance added externally, and PWB trace resistance to Co. Pulse-testing techniques are used to maintain virtual junction temperature as close as possible to ambient temperature; thermal effects must be taken into account separately. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 19 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 PARAMETER MEASUREMENT INFORMATION VO VIT+ t VI IN RESET EN SENSE OUT 0.1 F Reset + GND VO 10 F RESET RESET Timeout Delay CSR t TEST CIRCUIT VOLTAGE WAVEFORMS Figure 5. Test Circuit and Voltage Waveforms VI To Load IN OUT SENSE EN + CO GND Ccer RL CSR Ceramic capacitor Figure 6. Test Circuit for Typical Regions of Stability (Refer to Figures 29 through 32) 20 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 TYPICAL CHARACTERISTICS Table of Graphs IQ Quiescent current IQ Quiescent current TPS7348 vs Output current 7 vs Input voltage 8 vs Free-air temperature 10 vs Free-air temperature 11 IQ Quiescent current VDO VDO Dropout voltage vs Output current 12 Change in dropout voltage vs Free-air temperature 13 VDO VO Dropout voltage vs Output current 14 Change in output voltage vs Free-air temperature 15 VO VO Output voltage vs Input voltage 16 TPS7325 vs Input voltage 17 TPS7301 vs Output current 19 TPS7325 vs Output current 20 TPS7330 vs Output current 21 TPS7333 vs Output current 22 TPS7348 vs Output current 23 TPS7350 vs Output current 24 Output voltage TPS7325 9 vs Input voltage TPS7301 Line regulation VO Output voltage 18 Output voltage response from enable (EN) Load transient response 25 TPS7301 or TPS7333 26 TPS7325 27 TPS7348 or TPS7350 28 TPS7301 29 TPS7333 30 TPS7348 or TPS7350 31 Ripple rejection vs Frequency 32 Output spectral noise density vs Frequency 33 vs Output current 34 vs Added ceramic capacitance 35 vs Output current 36 vs Added ceramic capacitance 37 Compensation series resistance (CSR) Co = 4 4.7 7 F Co = 10 F rDS(on) Pass-element resistance vs Input voltage 38 VI VIT- Minimum input voltage for valid RESET vs Free-air temperature 39 Negative-going reset threshold vs Free-air temperature 40 IOL(RESET) td RESET output current vs Input voltage 41 Reset time delay vs Free-air temperature 42 td Distribution for reset delay 43 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 21 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 TYPICAL CHARACTERISTICS QUIESCENT CURRENT vs INPUT VOLTAGE QUIESCENT CURRENT vs OUTPUT CURRENT 500 450 450 425 TPS73xx, VI = 10 V I Q - Quiescent Current - A I Q - Quiescent Current - A TA = 25C IO = 500 mA TA = 25C 400 375 TPS7350, VI = 6 V 350 325 TPS7348, VI = 5.85 V TPS7333, VI = 4.3 V 300 TPS7333 350 TPS7348 TPS7350 300 250 TPS7301 With VO Programmed to 2.5 V 200 150 100 TPS7330, VI = 4 V 275 400 TPS7325, VI = 3.5 V 50 0 0 50 100 150 200 250 0 1 Figure 7 4 5 7 6 8 9 Figure 8 TPS7348 QUIESCENT CURRENT vs FREE-AIR TEMPERATURE TPS7325 QUIESCENT CURRENT vs INPUT VOLTAGE 500 500 VI = 5.85 V IO = 500 mA 450 I Q- Quiescent Current - A I Q- Quiescent Current - A 3 VI - Input Voltage - V IO - Output Current - mA 450 2 400 350 300 TA = 125C 400 TA = 85C 350 TA = 25C 300 250 250 200 - 50 200 TA = 0C TA = -40C - 25 0 25 50 75 100 125 3 4 TA - Free-Air Temperature - C Figure 9 22 5 6 7 8 VI - Input Voltage - V Figure 10 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 9 10 10 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 TYPICAL CHARACTERISTICS TPS7325 QUIESCENT CURRENT vs FREE-AIR TEMPERATURE DROPOUT VOLTAGE vs OUTPUT CURRENT 500 0.3 IL = 750 mA TA = 25C TPS7330 0.25 TPS7333 400 Dropout Voltage - V I Q- Quiescent Current - A 450 VI = 10 V 350 300 VI = 3.5 V 0.2 TPS7325 0.15 TPS7348 0.1 TPS7350 250 0.05 200 - 50 - 25 0 25 50 75 100 0 125 0 50 100 150 200 250 300 350 400 450 500 TA - Free-Air Temperature - C IO - Output Current - mA Figure 11 Figure 12 TPS7301 CHANGE IN DROPOUT VOLTAGE vs FREE-AIR TEMPERATURE DROPOUT VOLTAGE vs OUTPUT CURRENT 8 1.6 IO = 100 mA TA = 25C VI = 2.4 V 1.4 6 VDO - Dropout Voltage - V VDO- Change In Dropout Voltage - mV 10 4 2 0 -2 -4 -6 VI = 2.9 V 1 VI = 2.6 V VI = 3.2 V VI = 3.9 V 0.8 VI = 5.9 V 0.6 VI = 9.65 V 0.4 0.2 -8 - 10 - 50 1.2 - 25 0 25 50 75 100 125 0 0 TA - Free-Air Temperature - C 50 100 150 200 IO - Output Current - mA 250 Figure 14 Figure 13 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 23 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 TYPICAL CHARACTERISTICS OUTPUT VOLTAGE vs INPUT VOLTAGE CHANGE IN OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE 6 15 TA = 25C IO = 500 mA VI = VO(nom) + 1 V IO = 100 mA TPS7350 5 10 VO - Output Voltage - V VO - Change in Output Voltage - mV 20 5 0 -5 - 10 TPS7348 4 3 TPS7333 TPS7301 With VO Programmed to 2.5 V and TPS7325 2 1 - 15 0 - 20 - 50 - 25 0 25 50 75 100 125 0 1 2 3 4 5 6 7 8 9 10 VI - Input Voltage - V TA - Free-Air Temperature - C Figure 16 Figure 15 TPS7325 OUTPUT VOLTAGE vs INPUT VOLTAGE LINE REGULATION 3 20 TA = 25C VO- Change In Output Voltage - mV 100 mA VO - Output Voltage - V 2.5 500 mA 2 1.5 1 0.5 0 0 1 2 3 4 5 6 7 8 9 10 TA = 25C IO = 250 mA 15 10 TPS7350 5 TPS7348 0 -5 TPS7333 TPS7325 - 10 - 15 - 20 4 VI - Input Voltage - V 8 6 7 VI - Input Voltage - V Figure 18 Figure 17 24 5 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 9 10 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 TYPICAL CHARACTERISTICS TPS7301 TPS7325 OUTPUT VOLTAGE vs OUTPUT CURRENT OUTPUT VOLTAGE vs OUTPUT CURRENT 2.52 2.515 2.515 2.51 VO - Output Voltage - V VO - Output Voltage - V 2.52 TA = 25C VO Programmed to 2.5 V 2.505 2.5 VI = 3.5 V 2.495 VI = 10 V 2.49 2.51 VI = 10 V 2.505 2.5 2.495 VI = 3.5 V 2.49 2.485 2.485 2.48 2.48 0 100 200 400 300 500 0 100 IO - Output Current - mA 500 Figure 20 Figure 19 TPS7333 TPS7330 OUTPUT VOLTAGE vs OUTPUT CURRENT OUTPUT VOLTAGE vs OUTPUT CURRENT 3.34 3.15 TA = 25C TA = 25C 3.12 3.33 VO - Output Voltage - V 3.09 VO - Output Voltage - V 200 300 400 IO - Output Current - mA 3.06 3.03 3 2.97 2.94 3.32 3.31 VI = 10 V 3.3 VI = 4.3 V 3.29 3.28 2.91 3.27 2.88 2.85 3.26 0 100 200 300 400 500 0 IO - Output Current - mA 100 200 300 400 500 IO - Output Current - mA Figure 21 Figure 22 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 25 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 TYPICAL CHARACTERISTICS TPS7348 TPS7350 OUTPUT VOLTAGE vs OUTPUT CURRENT OUTPUT VOLTAGE vs OUTPUT CURRENT 5.06 4.92 4.9 5.04 4.89 5.03 VO - Output Voltage - V VO - Output Voltage - V 5.05 TA = 25C 4.91 4.88 4.87 VI = 5.85 V 4.86 4.85 VI = 10 V 4.84 5.02 5.01 4.99 4.82 4.96 4.81 4.95 4.94 100 200 400 300 500 VI = 10 V 4.98 4.97 0 VI = 6 V 5 4.83 4.8 TA = 25C 0 100 IO - Output Current - mA 200 300 400 IO - Output Current - mA Figure 23 Figure 24 6 VO(nom) 4 2 0 TA = 25C RL = 500 Co = 4.7 F (CSR = 1) No Input Capacitance 6 4 2 0 -2 0 20 40 60 80 100 120 140 Time - s Figure 25 26 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 EN Voltage - V VO - Output Voltage - V OUTPUT VOLTAGE RESPONSE FROM ENABLE (EN) 500 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 TYPICAL CHARACTERISTICS LOAD TRANSIENT RESPONSE 200 100 0 TA = 25C VI = 6 V CI = 0 Co = 4.7 F (CSR = 1 ) - 100 - 200 105 55 5 0 100 200 300 400 - 45 500 I O - Output Current - mA VO - Change in Output Voltage - mV TPS7301 (WITH VO PROGRAMMED TO 2.5 V) OR TPS7333 t - Time - s Figure 26 TPS7325 LOAD TRANSIENT RESPONSE VO - Change in Output Voltage - mV 150 100 50 0 -50 - 100 IO = 100 mA VI = 6 V CI = 0 Co = 10 F TA = 25C -150 -200 - 250 -300 -200 -100 0 100 200 300 400 500 600 t - Time - s Figure 27 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 27 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 TYPICAL CHARACTERISTICS 200 100 0 VI = 6 V CI = 0 Co = 4.7 F CSR = 1 TA = 25C - 100 - 200 105 55 5 0 100 200 300 400 - 45 500 I O - Output Current - mA VO - Change in Output Voltage - mV TPS7348 OR TPS7350 LOAD TRANSIENT RESPONSE t - Time - s TPS7301 WITH VO PROGRAMMED TO 2.5 V LINE TRANSIENT RESPONSE 100 50 0 - 50 - 100 TA = 25C CI = 0 Co = 4.7 F (CSR = 1 ) 6.5 6.25 6 0 100 200 300 t - Time - s Figure 29 28 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 5.75 400 VI - Input Voltage - V VO - Change in Output Voltage - mV Figure 28 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 TYPICAL CHARACTERISTICS 200 100 0 - 50 TA = 25C CI = 0 Co = 4.7 F (CSR = 1 ) - 100 6.5 6.25 6 0 100 200 300 400 5.75 500 V I - Input Voltage - V VO - Change in Output Voltage - mV TPS7333 LINE TRANSIENT RESPONSE t - Time - s Figure 30 100 50 0 - 50 TA = 25C CI = 0 Co = 4.7 F (CSR = 1 ) - 100 6.5 6.25 6 0 100 200 300 400 5.75 500 V I - Input Voltage - V VO - Change in Output Voltage - mV TPS7348 OR TPS7350 LINE TRANSIENT RESPONSE t - Time - s Figure 31 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 29 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 TYPICAL CHARACTERISTICS RIPPLE REJECTION vs FREQUENCY OUTPUT SPECTRAL-NOISE DENSITY vs FREQUENCY 60 TPS7333 TPS7348/ TPS7350 Output Spectral-Noise Density - V/ Hz Ripple Rejection - dB 50 40 10 TA = 25C No Input Capacitance Added VI = VO + 1 V IO = 100 mA Co = 4.7 F (CSR = 1) TPS7301 With VO Programmed to 2.5 V 30 20 10 0 10 100 1K 10 K 100 K 1M TA = 25C No Input Capacitance Added VI = VO + 1 V Co = 4.7 F (CSR = 1 ) 1 Co = 10 F (CSR = 1 ) 0.1 Co = 100 F (CSR = 1 ) 0.01 10 10 M 100 f - Frequency - Hz Figure 32 TYPICAL REGIONS OF STABILITY TYPICAL REGIONS OF STABILITY COMPENSATION SERIES RESISTANCE (CSR) vs OUTPUT CURRENT COMPENSATION SERIES RESISTANCE (CSR) vs ADDED CERAMIC CAPACITANCE 100 CSR - Compensation Series Resistance - CSR - Compensation Series Resistance - 100 k Figure 33 100 Region of Instability 10 1 TA = 25C VI = VO + 1 V Co = 4.7 F No Added Ceramic Capacitance No Input Capacitance Added 0.1 Region of Instability 0.01 0 50 100 Region of Instability 10 TA = 25C VI = VO + 1 V IO = 500 mA Co = 4.7 F No Input Capacitor Added 1 0.1 Region of Instability 0.01 150 200 250 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Added Ceramic Capacitance - F IO - Output Current - mA Figure 34 30 1k 10 k f - Frequency - Hz Figure 35 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 0.9 1 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 TYPICAL CHARACTERISTICS TYPICAL REGIONS OF STABILITY TYPICAL REGIONS OF STABILITY COMPENSATION SERIES RESISTANCE (CSR) vs OUTPUT CURRENT COMPENSATION SERIES RESISTANCE (CSR) vs ADDED CERAMIC CAPACITANCE 100 Region of Instability CSR - Compensation Series Resistance - CSR - Compensation Series Resistance - 100 10 TA = 25C VI = VO + 1 V Co = 10 F No Added Ceramic Capacitance No Input Capacitor Added 1 0.1 Region of Instability 0.01 Region of Instability 10 1 0.1 Region of Instability 0.01 0 50 100 150 200 250 0 0.1 0.2 0.3 0.4 0.5 Figure 36 VI - Minimum Input Voltage For Valid RESET - V TA = 25C VI(FB) = 1.12 V 0.9 0.8 IO = 500 mA 0.6 0.5 IO = 100 mA 0.4 0.3 0.2 0.1 2 3 4 1 MINIMUM INPUT VOLTAGE FOR VALID RESET vs FREE-AIR TEMPERATURE 1.1 0.7 0.9 Figure 37 PASS-ELEMENT RESISTANCE vs INPUT VOLTAGE 1 0.6 0.7 0.8 Added Ceramic Capacitance - F IO - Output Current - mA rDS(on) - Pass-Element Resistance - TA = 25C VI = VO + 1 V IO = 500 mA Co = 10 F No Input Capacitor Added 6 8 5 7 VI - Input Voltage - V 9 10 1.1 1.09 1.08 1.07 1.06 AA AA 1.05 - 50 - 25 0 25 50 75 100 TA - Free-Air Temperature - C 125 Figure 39 Figure 38 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 31 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 TYPICAL CHARACTERISTICS NEGATIVE-GOING RESET THRESHOLD vs FREE-AIR TEMPERATURE RESET OUTPUT CURRENT vs INPUT VOLTAGE 4 IL = 10 mA VOL 0.4 V TA = 25C 3.5 I OL - RESET Output Current - mA VIT- - Negative-Going Reset Threshold - mV 15 10 5 0 -5 AA AA - 10 - 15 - 50 3 2.5 2 TPS7350 1.5 TPS7348 1 TPS7333 0.5 - 25 0 25 50 75 100 0 125 0 1 2 TA - Free-Air Temperature - C 3 4 5 6 7 8 9 10 VI - Input Voltage - V Figure 40 Figure 41 RESET DELAY TIME vs FREE-AIR TEMPERATURE DISTRIBUTION FOR RESET DELAY 50 197 TA = 25C 197 Devices 45 196 Percentage of Units - % td - Reset Delay Time - ms 40 195 194 193 192 35 30 25 20 15 10 191 190 - 50 5 - 25 0 25 50 75 100 TA - Free-Air Temperature -C 125 0 180 Figure 42 32 185 200 205 190 195 td - Reset Delay Time - ms Figure 43 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 210 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 THERMAL INFORMATION In response to system-miniaturization trends, integrated circuits are being offered in low-profile and fine-pitch surface-mount packages. Implementation of many of today's high-performance devices in these packages requires special attention to power dissipation. Many system-dependent issues such as thermal coupling, airflow, added heat sinks and convection surfaces, and the presence of other heat-generating components affect the power-dissipation limits of a given component. Three basic approaches for enhancing thermal performance are illustrated in this discussion: D Improving the power-dissipation capability of the PWB design D Improving the thermal coupling of the component to the PWB D Introducing airflow in the system Figure 44 is an example of a thermally enhanced PWB layout for the 20-lead TSSOP package. This layout involves adding copper on the PWB to conduct heat away from the device. The RJA (thermal resistance, junction-to-ambient) for this component / board system is illustrated in Figure 45. The family of curves illustrates the effect of increasing the size of the copper-heat-sink surface area. The PWB is a standard FR4 board (L x W x H = 3.2 inch x 3.2 inch x 0.062 inch); the board traces and heat sink area are 1-oz (per square foot) copper. Figure 46 shows the thermal resistance for the same system with the addition of a thermally-conductive compound between the body of the TSSOP package and the PWB copper routed directly beneath the device. The thermal conductivity for the compound used in this analysis is 0.815 W/m x C. Using these figures to determine the system RJA allows the maximum power-dissipation limit to be calculated with the equation: + RJ(max) D(max) T P * TA qJA(system) Where TJ(max) is the maximum allowable junction temperature; 150C absolute maximum and 125C maximum recommended operating temperature for specified operation. This limit should then be applied to the internal power dissipated by the TPS73xx regulator. The equation for calculating total internal power dissipation of the TPS73xx is: P D(total) + VI * VO I O ) VI I Q Because the quiescent current of the TPS73xx family is very low, the second term is negligible, further simplifying the equation to: P D(total) + VI * VO I O For a 20-lead TSSOP / FR4 board system with thermally conductive compound between the board and the device body, where TA = 55C, airflow = 100 ft /min, and copper heat sink area = 1 cm2, the maximum power-dissipation limit can be calculated. As indicated in Figure 46, the system RJA is 94C/W; therefore, the maximum power-dissipation limit is: + RJ(max) D(max) T P * TA qJA(system) + 12594 C C* W55 C + 745 mW If the system implements a TPS7348 regulator where VI = 6 V and IO = 150 mA, the internal power dissipation is: P D(total) + VI * VO I O + (6 * 4.85) 0.150 POST OFFICE BOX 655303 + 173 mW * DALLAS, TEXAS 75265 33 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 THERMAL INFORMATION Comparing PD(total) with PD(max) reveals that the power dissipation in this example does not exceed the maximum limit. When it does, one of two corrective actions can be taken. The power-dissipation limit can be raised by increasing either the airflow or the heat-sink area. Alternatively, the internal power dissipation of the regulator can be lowered by reducing either the input voltage or the load current. In either case, the above calculations should be repeated with the new system parameters. Copper Heat Sink 1 oz Cu THERMAL RESISTANCE, JUNCTION-TO-AMBIENT vs AIR FLOW 190 Component /Board System 20-Lead TSSOP 0 cm2 170 1 cm2 150 2 cm2 130 110 90 4 cm2 8 cm2 70 50 0 50 100 150 200 250 300 THERMAL RESISTANCE, JUNCTION-TO-AMBIENT vs AIR FLOW RJA - Thermal Resistance, Junction-to-Ambient - C/W RJA - Thermal Resistance, Junction-to-Ambient - C/W Figure 44. Thermally Enhanced PWB Layout (not to scale) for the 20-Pin TSSOP 190 Component /Board System 20-Lead TSSOP Includes Thermally Conductive Compound Between Body and Board 170 150 0 cm2 130 8 cm2 110 2 cm2 90 50 0 50 100 150 200 Air Flow - ft /min Figure 45 Figure 46 POST OFFICE BOX 655303 1 cm2 70 Air Flow - ft /min 34 4 cm2 * DALLAS, TEXAS 75265 250 300 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 APPLICATION INFORMATION The TPS73xx series of low-dropout (LDO) regulators overcome many of the shortcomings of earlier generation LDOs, while adding features such as a power-saving shutdown mode and a supply-voltage supervisor. The TPS73xx family includes five fixed-output voltage regulators: the TPS7325 (2.5 V), TPS7330 (3 V), TPS7333 (3.3 V), the TPS7348 (4.85 V), and the TPS7350 (5 V). The family also offers an adjustable device, the TPS7301 (adjustable from 1.2 V to 9.75 V). device operation The TPS73xx, unlike many other LDOs, features very low quiescent currents that remain virtually constant even with varying loads. Conventional LDO regulators use a pnp-pass element, the base current of which is directly proportional to the load current through the regulator (IB = IC/). Close examination of the data sheets reveals that such devices are typically specified under near no-load conditions; actual operating currents are much higher as evidenced by typical quiescent current versus load current curves (see Figure 7). The TPS73xx uses a PMOS transistor to pass current; because the gate of the PMOS element is voltage driven, operating currents are low and invariable over the full load range. The TPS73xx specifications reflect actual performance under load. Another pitfall associated with the pnp-pass element is its tendency to saturate when the device goes into dropout. The resulting drop in forces an increase in IB to maintain the load. During power-up, this translates to large start-up currents. Systems with limited supply current may fail to start up. In battery-powered systems, it means rapid battery discharge when the voltage decays below the minimum required for regulation. The TPS73xx quiescent current remains low even when the regulator drops out, thus eliminating both problems. Included in the TPS73xx family is a 4.85-V regulator, the TPS7348. Designed specifically for 5-V cellular systems, its 4.85-V output, regulated to within 2%, allows for operation within the low-end limit of 5-V systems specified to 5% tolerance; therefore, maximum regulated operating lifetime is obtained from a battery pack before the device drops out, adding crucial talk minutes between charges. The TPS73xx family also features a shutdown mode that places the output in the high-impedance state (essentially equal to the feedback-divider resistance) and reduces quiescent current to under 0.5 A. When the shutdown feature is not used, EN should be tied to ground. Response to an enable transition is quick; regulated output voltage is reestablished in typically 120 s. minimum load requirements The TPS73xx family is stable even at zero load; no minimum load is required for operation. SENSE connection The SENSE terminal of fixed-output devices must be connected to the regulator output for proper functioning of the regulator. Normally, this connection should be as short as possible; however, the connection can be made near a critical circuit (remote sense) to improve performance at that point. Internally, SENSE connects to a high-impedance wide-bandwidth amplifier through a resistor-divider network, and noise pickup feeds through to the regulator output. It is essential to route the SENSE connection in such a way as to minimize/avoid noise pickup. Adding an RC network between SENSE and OUT to filter noise is not recommended because it can cause the regulator to oscillate. external capacitor requirements An input capacitor is not required; however, a ceramic bypass capacitor (0.047 pF to 0.1 F) improves load transient response and noise rejection when the TPS73xx is located more than a few inches from the power supply. A higher-capacitance electrolytic capacitor may be necessary if large (hundreds of milliamps) load transients with fast rise times are anticipated. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 35 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 APPLICATION INFORMATION external capacitor requirements (continued) As with most LDO regulators, the TPS73xx family requires an output capacitor for stability. A low-ESR 10-F solid-tantalum capacitor connected from the regulator output to ground is sufficient to ensure stability over the full load range (see Figure 42). Adding high-frequency ceramic or film capacitors (such as power-supply bypass capacitors for digital or analog ICs) can cause the regulator to become unstable unless the ESR of the tantalum capacitor is less than 1.2 over temperature. Capacitors with published ESR specifications such as the AVX TPSD106M035R0300 and the Sprague 593D106X0035D2W work well because the maximum ESR at 25C is 300 m (typically, the ESR in solid-tantalum capacitors increases by a factor of 2 or less when the temperature drops from 25C to - 40C). Where component height and/or mounting area is a problem, physically smaller, 10-F devices can be screened for ESR. Figures 29 through 32 show the stable regions of operation using different values of output capacitance with various values of ceramic load capacitance. In applications with little or no high-frequency bypass capacitance (< 0.2 F), the output capacitance can be reduced to 4.7 F, provided ESR is maintained between 0.7 and 2.5 . Because capacitor minimum ESR is seldom if ever specified, it may be necessary to add a 0.5- to 1- resistor in series with the capacitor and limit ESR to 1.5 maximum. As shown in the CSR graphs (Figures 29 through 32), minimum ESR is not a problem when using 10-F or larger output capacitors. Below is a partial listing of surface-mount capacitors usable with the TPS73xx family. This information, along with the CSR graphs, is included to assist in selection of suitable capacitance for the user's application. When necessary to achieve low height requirements along with high output current and/or high ceramic load capacitance, several higher ESR capacitors can be used in parallel to meet the guidelines above. All load and temperature conditions with up to 1 F of added ceramic load capacitance: PART NO. MFR. VALUE MAX ESR SIZE (H x L x W) T421C226M010AS Kemet 22 F, 10 V 0.5 2.8 x 6 x 3.2 593D156X0025D2W Sprague 15 F, 25 V 0.3 2.8 x 7.3 x 4.3 593D106X0035D2W Sprague 10 F, 35 V 0.3 2.8 x 7.3 x 4.3 10 F, 35 V 0.3 2.8 x 7.3 x 4.3 TPSD106M035R0300 AVX Load < 200 mA, ceramic load capacitance < 0.2 F, full temperature range: MFR. VALUE MAX ESR SIZE (H x L x W) 592D156X0020R2T Sprague 15 F, 20 V 1.1 1.2 x 7.2 x 6 595D156X0025C2T Sprague 15 F, 25 V 1 PART NO. 2.5 x 7.1 x 3.2 595D106X0025C2T Sprague 10 F, 25 V 1.2 2.5 x 7.1 x 3.2 293D226X0016D2W Sprague 22 F, 16 V 1.1 2.8 x 7.3 x 4.3 Load < 100 mA, ceramic load capacitance < 0.2 F, full temperature range: MFR. VALUE MAX ESR SIZE (H x L x W) 195D106X06R3V2T Sprague 10 F, 6.3 V 1.5 1.3 x 3.5 x 2.7 195D106X0016X2T Sprague 10 F, 16 V 1.5 1.3 x 7 x 2.7 595D156X0016B2T Sprague 15 F, 16 V 1.8 1.6 x 3.8 x 2.6 695D226X0015F2T Sprague 22 F, 15 V 1.4 1.8 x 6.5 x 3.4 695D156X0020F2T Sprague 15 F, 20 V 1.5 1.8 x 6.5 x 3.4 695D106X0035G2T Sprague 10 F, 35 V 1.3 2.5 x 7.6 x 2.5 PART NO. Size is in mm. ESR is maximum resistance at 100 kHz and TA = 25C. Listings are sorted by height. 36 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 APPLICATION INFORMATION external capacitor requirements (continued) TPS73xxPW 8 VI IN RESET IN SENSE 9 To System Reset 15 10 IN 0.1 F 20 OUT 6 EN OUT 250 k 14 VO 13 + GND 1 2 3 10 F CSR = 1 TPS7333, TPS7348, TPS7350 (fixed-voltage options) Figure 47. Typical Application Circuit programming the TPS7301 adjustable LDO regulator Programming the adjustable regulators is accomplished using an external resistor divider as shown in Figure 43. The equation governing the output voltage is: V O + Vref ) 1 R1 R2 Where Vref = reference voltage, 1.182 V typ POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 37 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 APPLICATION INFORMATION Resistors R1 and R2 should be chosen for approximately 7-A divider current. A recommended value for R2 is 169 k with R1 adjusted for the desired output voltage. Smaller resistors can be used, but offer no inherent advantage and consume more power. Larger values of R1 and R2 should be avoided as leakage currents at FB will introduce an error. Solving for R1 yields a more useful equation for choosing the appropriate resistance: R1 + V V O ref *1 R2 OUTPUT VOLTAGE PROGRAMMING GUIDE TPS7301 >2.7 V VI 0.1 F IN EN RESET To System Reset 250 k OUT VO <0.5 V R1 FB GND + 10 F CSR = 1 R2 OUTPUT VOLTAGE R1 R2 UNIT 2.5 V 191 169 k 3.3 V 309 169 k 3.6 V 348 169 k 4V 402 169 k 5V 549 169 k 6.4 V 750 169 k Figure 48. TPS7301 Adjustable LDO Regulator Programming undervoltage supervisor function The RESET output of the TPS73xx initiates a reset in microcomputer and microprocessor systems in the event of an undervoltage condition. An internal comparator in the TPS73xx monitors the output voltage of the regulator to detect the undervoltage condition. When that occurs, the RESET output transistor turns on taking the RESET signal low. On power up, the output voltage tracks the input voltage. The RESET output becomes active (low) as VI approaches the minimum required for a valid RESET signal (specified at 1.5 V for 25C and 1.9 V over full recommended operating temperature range). When the output voltage reaches the appropriate positive-going input threshold (VIT+), a 200-ms (typical) timeout period begins during which the RESET output remains low. Once the timeout has expired, the RESET output becomes inactive. Since the RESET output is an open-drain NMOS, a pullup resistor should be used to ensure that a logic-high signal is indicated. The supply-voltage-supervisor function is also activated during power-down. As the input voltage decays and after the dropout voltage is reached, the output voltage tracks linearly with the decaying input voltage. When the output voltage drops below the specified negative-going input threshold (VIT- -- see electrical characteristics tables), the RESET output becomes active (low). It is important to note that if the input voltage decays below the minimum required for a valid RESET, the RESET is undefined. Since the circuit is monitoring the regulator output voltage, the RESET output can also be triggered by disabling the regulator or by any fault condition that causes the output to drop below VIT-. Examples of fault conditions include a short circuit on the output and a low input voltage. Once the output voltage is reestablished, either by reenabling the regulator or removing the fault condition, then the internal timer is initiated, which holds the RESET signal active during the 200-ms (typical) timeout period. 38 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION SLVS124F - JUNE 1995 - REVISED JANUARY 1999 APPLICATION INFORMATION undervoltage supervisor function (continued) Transient loads or line pulses can also cause a reset to occur if proper care is not taken in selecting the input and output capacitors. Load transients that are faster than 5 s can cause a reset if high-ESR output capacitors (greater than approximately 7 ) are used. A 1-s transient causes a reset when using an output capacitor with greater than 3.5 of ESR. Note that the output-voltage spike during the transient can drop well below the reset threshold and still not trip if the transient duration is short. A 1-s transient must drop at least 500 mV below the threshold before tripping the reset circuit. A 2-s transient trips RESET at just 400 mV below the threshold. Lower-ESR output capacitors help by reducing the drop in output voltage during a transient and should be used when fast transients are expected. NOTE: VIT+ = VIT - +Hysteresis output noise The TPS73xx has very low output noise, with a spectral noise density < 2 V/ Hz. This is important when noise-susceptible systems, such as audio amplifiers, are powered by the regulator. regulator protection The TPS73xx PMOS-pass transistor has a built-in back diode that safely conducts reverse currents when the input voltage drops below the output voltage (e.g., during power down). Current is conducted from the output to the input and is not internally limited. If extended reverse voltage is anticipated, external limiting might be appropriate. The TPS73xx also features internal current limiting and thermal protection. During normal operation, the TPS73xx limits output current to approximately 1 A. When current limiting engages, the output voltage scales back linearly until the overcurrent condition ends. While current limiting is designed to prevent gross device failure, care should be taken not to exceed the power dissipation ratings of the package. If the temperature of the device exceeds 165C, thermal-protection circuitry shuts it down. Once the device has cooled, regulator operation resumes. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 39 PACKAGE OPTION ADDENDUM www.ti.com 28-Aug-2008 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TPS7301QD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7301QDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7301QDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7301QDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7301QP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TPS7301QPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TPS7301QPW ACTIVE TSSOP PW 20 70 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7301QPWG4 ACTIVE TSSOP PW 20 70 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7301QPWLE OBSOLETE TSSOP PW 20 TPS7301QPWR ACTIVE TSSOP PW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7301QPWRG4 ACTIVE TSSOP PW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7325QD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7325QDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7325QP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TPS7325QPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TPS7325QPW ACTIVE TSSOP PW 20 70 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7325QPWG4 ACTIVE TSSOP PW 20 70 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7325QPWR ACTIVE TSSOP PW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7325QPWRG4 ACTIVE TSSOP PW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7330QD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7330QDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7330QDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7330QDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7330QP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TPS7330QPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TBD Addendum-Page 1 Lead/Ball Finish Call TI MSL Peak Temp (3) Call TI PACKAGE OPTION ADDENDUM www.ti.com 28-Aug-2008 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TPS7330QPWR ACTIVE TSSOP PW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7330QPWRG4 ACTIVE TSSOP PW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7333QD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7333QDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7333QDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7333QDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7333QP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TPS7333QPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TPS7333QPW ACTIVE TSSOP PW 20 70 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7333QPWG4 ACTIVE TSSOP PW 20 70 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7333QPWLE OBSOLETE TSSOP PW 20 TPS7333QPWR ACTIVE TSSOP PW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7333QPWRG4 ACTIVE TSSOP PW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7348QD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7348QDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7348QDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7348QDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7348QP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TPS7348QPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TPS7348QPWLE OBSOLETE TSSOP PW 20 TBD Call TI TPS7350QD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7350QDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7350QDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7350QDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7350QP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TPS7350QPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TPS7350QPWLE OBSOLETE TSSOP PW 20 TBD Call TI TBD Addendum-Page 2 Lead/Ball Finish Call TI MSL Peak Temp (3) Call TI Call TI Call TI PACKAGE OPTION ADDENDUM www.ti.com 28-Aug-2008 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TPS7350QPWR ACTIVE TSSOP PW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS7350QPWRG4 ACTIVE TSSOP PW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 3 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant TPS7301QDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TPS7301QPWR TSSOP PW 20 2000 330.0 16.4 6.95 7.1 1.6 8.0 16.0 Q1 TPS7325QPWR TSSOP PW 20 2000 330.0 16.4 6.95 7.1 1.6 8.0 16.0 Q1 TPS7330QDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TPS7330QPWR TSSOP PW 20 2000 330.0 16.4 6.95 7.1 1.6 8.0 16.0 Q1 TPS7333QDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TPS7333QPWR TSSOP PW 20 2000 330.0 16.4 6.95 7.1 1.6 8.0 16.0 Q1 TPS7348QDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TPS7350QDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TPS7350QPWR TSSOP PW 20 2000 330.0 16.4 6.95 7.1 1.6 8.0 16.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TPS7301QDR SOIC D 8 2500 367.0 367.0 35.0 TPS7301QPWR TSSOP PW 20 2000 367.0 367.0 38.0 TPS7325QPWR TSSOP PW 20 2000 367.0 367.0 38.0 TPS7330QDR SOIC D 8 2500 367.0 367.0 35.0 TPS7330QPWR TSSOP PW 20 2000 367.0 367.0 38.0 TPS7333QDR SOIC D 8 2500 367.0 367.0 35.0 TPS7333QPWR TSSOP PW 20 2000 367.0 367.0 38.0 TPS7348QDR SOIC D 8 2500 367.0 367.0 35.0 TPS7350QDR SOIC D 8 2500 367.0 367.0 35.0 TPS7350QPWR TSSOP PW 20 2000 367.0 367.0 38.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated