Analog Devices Welcomes
Hittite Microwave Corporation
NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
www.analog.com www.hittite.com
THIS PAGE INTENTIONALLY LEFT BLANK
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SUBHARMONIC - SMT
1
HMC258LC3B
v03.0414
GaAs MMIC SUB-HARMONIC
SMT MIXER, 14.5 - 19.5 GHz
General Description
Features
Functional Diagram
The HMC258LC3B is a 14.5 - 19.5 GHz surface
mount sub-harmonically pumped (x2) MMIC mixer
with an integrated LO amplier in a SMT leadless
ceramic package. At 45 dB the 2LO to RF isolation
eliminates the need for additional ltering. The LO
amplier is a single bias (+5V) two stage design with
only 0 dBm drive requirement. The HMC258LC3B
requires no external matching components, making it
ideal for integrated subsystem applications. Utilizing
the HMC258LC3B eliminates the need for wire-
bonding, thereby providing a consistent connection
interface for the customer.
Integrated LO Amplier: 0 dBm Input
Sub-Harmonically Pumped (x2) LO
High 2LO/RF Isolation: >45 dB
Wide IF Bandwidth: DC - 3.5 GHz
No External Matching Required
RoHS Compliant 3x3mm Ceramic SMT Package
Electrical Specications, TA = +25 °C, LO Drive = 0 dBm
Typical Applications
The HMC258LC3B is ideal for:
• Point to Point Radios
• VSAT and SATCOM
• Test & Measurement Equipment
• Military & Space
Parameter
IF = 1 GHz
Vdd = +5.0V Units
Min. Typ. Max.
Frequency Range, RF 14.5 - 19.5 GHz
Frequency Range, LO 7.25 - 10 GHz
Frequency Range, IF DC - 3.5 GHz
Conversion Loss 10 14 dB
Noise Figure (SSB) 10 14 dB
2LO to RF Isolation 35 45 dB
2LO to IF Isolation 30 40 dB
IP3 (Input) 5dBm
1 dB Compression (Input) -3 dBm
Supply Current (Idd) 42 57 mA
*Unless otherwise noted, all measurements performed as downconverter, IF= 1 GHz.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SUBHARMONIC - SMT
2
HMC258LC3B
v03.0414
GaAs MMIC SUB-HARMONIC
SMT MIXER, 14.5 - 19.5 GHz
Conversion Gain vs.
Temperature @ LO = 0 dBm Conversion Gain vs. LO Drive
Isolation @ LO = 0 dBm
IF Bandwidth @ LO = 0 dBm
RF & LO Return Loss @ LO = 0 dBm
IF Return Loss @ LO = 0 dBm
-25
-20
-15
-10
-5
0
14 15 16 17 18 19 20
+25C
-40C
+85C
CONVERSION GAIN (dB)
RF FREQUENCY (GHz)
-25
-20
-15
-10
-5
0
14 15 16 17 18 19 20
LO = -4dBm
LO = -2dBm
LO = 0dBm
LO = +2dBm
LO = +4dBm
CONVERSION GAIN (dB)
RF FREQUENCY (GHz)
-60
-50
-40
-30
-20
-10
0
10
14 15 16 17 18 19 20
ISOLATION (dB)
RF FREQUENCY (GHz)
2LO/RF
LO/RF
RF/IF
2LO/IF
LO/IF
-30
-25
-20
-15
-10
-5
0
0 5 10 15 20 25
LO
RF
RETURN LOSS (dB)
FREQUENCY (GHz)
-25
-20
-15
-10
-5
0
0123456
IF CONVERSION GAIN (dB)
IF FREQUENCY (GHz)
-30
-25
-20
-15
-10
-5
0
0123456
RETURN LOSS (dB)
IF FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SUBHARMONIC - SMT
3
HMC258LC3B
v03.0414
GaAs MMIC SUB-HARMONIC
SMT MIXER, 14.5 - 19.5 GHz
MxN Spurious Outputs@ LO = 0 dBm
Upconverter Performance
Conversion Gain @ LO = 0 dBm
Input IP3 vs. LO Drive * Input IP2 vs. LO Drive *
Input P1dB
* Two-tone input power = -10 dBm each tone, 1 MHz spacing.
nLO
mRF -2 -4 -6 -8 9 7 5 3
1 X
247.1
334.5
466.7
-4 50.1
-3 59.5
-2 32.8
-1 45.4
RF = 18 GHz @ -10 dBm
LO = 8.5 GHz @ 0 dBm
All values in dBc below IF power level.
-5
0
5
10
15
20
14 15 16 17 18 19 20 21 22
-2 dBm
0 dBm
+2 dBm
IP3 (dBm)
RF FREQUENCY (GHz)
0
10
20
30
40
50
60
14 15 16 17 18 19 20 21 22
-2 dBm
0 dBm
+2 dBm
IP2 (dBm)
RF FREQUENCY (GHz)
-10
-8
-6
-4
-2
0
2
4
6
8
10
14 15 16 17 18 19 20 21
P1dB (dBm)
RF FREQUENCY (GHz)
-25
-20
-15
-10
-5
0
14 15 16 17 18 19 20 21
CONVERSION GAIN (dB)
RF FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SUBHARMONIC - SMT
4
HMC258LC3B
v03.0414
GaAs MMIC SUB-HARMONIC
SMT MIXER, 14.5 - 19.5 GHz
Outline Drawing
Absolute Maximum Ratings
RF / IF Input (Vdd = +5V) +13 d Bm
LO Drive (Vdd = +5V) +13 d Bm
Vdd +5.5V
Continous Pdiss (Ta = 85 °C)
(derate 2.1 mW/°C above 85 °C) 486 mW
Channel Temperature 150 °C
Thermal Resistance
(channel to ground paddle) 133.6 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA.
2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER NICKEL.
3. DIMENSIONS ARE IN INCHES (MILLIMETERS).
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. CHARACTERS TO BE HELVETICA MEDIUM, .025 HIGH, BLACK INK,
OR LASER MARK LOCATED APPROX. AS SHOWN.
6. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM – C –
7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
Package Information
Part Number Package Body Material Lead Finish MSL Rating Package Marking [2]
HMC258LC3B Alumina, White Gold over Nickel MSL3 [1] H258
XXXX
[1] Max peak reow temperature of 260 °C
[2] 4-Digit lot number XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SUBHARMONIC - SMT
5
HMC258LC3B
v03.0414
GaAs MMIC SUB-HARMONIC
SMT MIXER, 14.5 - 19.5 GHz
Pin Number Function Description Interface Schematic
1, 4, 6,
10, 12 GND Must be soldered to PCB RF ground.
2IF
IF Port. This pin is DC coupled and should be DC blocked
externally using a series capacitor whose value has been
chosen to pass the necessary IF frequency range. Any applied
DC voltage to this pin will result in die non-function and
possible die failure.
3Vdd
Power Supply for the LO Amplier. An external RF bypass
capacitor of 100 - 330 pF is required as close to the package
as possible.
5LO LO Port. This pin is AC coupled and matched to 50 Ohms.
7 - 9 N/C This pin may be connected to the housing
ground or left unconnected.
11 RF RF Port. This pin is AC coupled and matched to 50 Ohms.
Pin Description
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SUBHARMONIC - SMT
6
HMC258LC3B
v03.0414
GaAs MMIC SUB-HARMONIC
SMT MIXER, 14.5 - 19.5 GHz
Evaluation PCB
Item Description
J1, J2 SRI SMA Connector
J3 Johnson SMA Connector
C1 100pF Capacitor. 0402 Pkg.
C2 1000pF Capacitor, 0603 Pkg.
C3 2.2 µF
U1 HMC258LC3B Mixer
PCB [2] 110860 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used
to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
List of Materials for Evaluation PCB 110862 [1]
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Analog Devices Inc.:
HMC258LC3BTR-R5