A Product Line of Diodes Incorporated DXT790AP5 40V PNP HIGH GAIN TRANSISTOR (R) POWERDI Features Mechanical Data * * * BVCEO > -40V IC = -3A high Continuous Collector Current ICM = -6A Peak Pulse Current * * * * * * * * * 43% smaller than SOT223; 60% smaller than TO252 Maximum Height Just 1.1mm Rated up to 3.2W Low Saturation, High Gain Transistor, Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2) Halogen and Antimony Free. "Green" Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability * * * Case: POWERDI5 Case Material: Molded Plastic, "Green" Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish - Matte Tin annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 e3 Weight: 0.093 grams (approximate) C POWERDI5 B Top View Bottom View Device Schematic E Top View Pin Out Ordering Information (Note 4) Product DXT790AP5-13 Notes: Marking DXT790A Reel size (inches) 13 Tape width (mm) 16 Quantity per reel 5,000 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated's definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green" products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For packaging details, go to our website at http://www.diodes.com/products/packages.html Marking Information DXT790A YYWWK DXT790A = Product Type Marking Code = Manufacturers' Code Marking K = Factory Designator YYWW = Date Code Marking YY = Last Two Digits of Year (ex: 09 for 2009) WW = Week code (01 to 53) POWERDI is a registered trademark of Diodes Incorporated. DXT790AP5 Document number: DS31800 Rev. 3 - 2 1 of 7 www.diodes.com June 2013 (c) Diodes Incorporated A Product Line of Diodes Incorporated DXT790AP5 Maximum Ratings (@TA = +25C, unless otherwise specified.) Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Continuous Collector Current Peak Pulse Current Base Current Symbol VCBO VCEO VEBO IC ICM IB Value -50 -40 -6 -3 -6 -0.5 Unit V V V A A A Value 3.2 1.7 0.74 39 75 169 8.9 -55 to +150 Unit Thermal Characteristics (@TA = +25C, unless otherwise specified.) Characteristic Power Dissipation Thermal Resistance, Junction to Ambient Air Thermal Resistance, Junction to Lead Operating and Storage Temperature Range Notes: Symbol (Note 5) (Note 6) (Note 7) (Note 5) (Note 6) (Note 7) (Note 8) PD RJA RJL TJ, TSTG W C/W C/W C 5. For a device mounted with the exposed collector pad on 50mm x 50mm 2oz copper that is on a single-sided 1.6mm FR4 PCB; device is measured under still air conditions whilst operating in a steady-state. 6. Same as note (5), except the device is mounted on 25mm x 25mm 1oz copper. 7. Same as note (5), except the device is mounted on minimum recommended pad (MRP) layout 1oz copper. 8. Thermal resistance from junction to solder-point (on the exposed collector pad). POWERDI is a registered trademark of Diodes Incorporated. DXT790AP5 Document number: DS31800 Rev. 3 - 2 2 of 7 www.diodes.com June 2013 (c) Diodes Incorporated A Product Line of Diodes Incorporated DXT790AP5 Thermal Characteristics and Derating Information 3.5 VCE(sat) Limited Max Power Dissipation (W) -IC Collector Current (A) 10 1 DC 1s 100m 100ms 10ms Single Pulse. TA=25C 50mm X 50mm 2oz Cu 10m 100m 1ms 100s 1 10 -VCE Collector-Emitter Voltage (V) 3.0 50mm X 50mm 2oz Cu 2.5 25mm X 25mm 1oz Cu 2.0 1.5 MRP 1oz 1.0 0.5 0.0 0 25 50 D=0.5 20 Single Pulse 0 100 1m D=0.05 D=0.1 10m 100m 1 10 100 1k Pulse Width (s) Max Power Dissipation (W) Thermal Resistance (C/W) 30 D=0.2 175 10 1 100 1m 10m 100m 1 10 100 1k Pulse Width (s) Pulse Power Dissipation 4 180 TA=25C 160 TA=25C Power Rating (W) Thermal Resistance (C/W) 150 Single Pulse. TA=25C 50mm X 50mm 2oz Cu 100 Transient Thermal Impedance 140 120 100 1 oz Cu 80 60 2 oz Cu 40 20 10 125 Derating Curve 50mm X 50mm 2oz Cu 10 100 Ambient Temperature (C) Safe Operating Area 40 75 100 1000 10000 3 2 oz Cu 2 1 oz Cu 1 0 10 100 1000 10000 Copper Area (sq mm) Copper Area (sq mm) Thermal Resistance vs. Cu Area Power Rating vs. Cu Area POWERDI is a registered trademark of Diodes Incorporated. DXT790AP5 Document number: DS31800 Rev. 3 - 2 3 of 7 www.diodes.com June 2013 (c) Diodes Incorporated A Product Line of Diodes Incorporated DXT790AP5 Electrical Characteristics (@TA = +25C, unless otherwise specified.) Characteristic OFF CHARACTERISTICS Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage (Note 8) Emitter-Base Breakdown Voltage Collector Cutoff Current Collector Cutoff Current Emitter Cutoff Current ON CHARACTERISTICS (Note 8) Symbol Min Typ Max Unit BVCBO BVCEO BVEBO ICBO ICES IEBO -50 -40 -6 -20 -20 -20 V V V nA nA nA -170 -350 -450 -450 mV -1.15 -1.0 V V hFE 300 250 200 150 80 800 Transition Frequency fT 100 MHz Output Capacitance Cobo ton toff 24 35 600 pF ns ns Collector-Emitter Saturation Voltage VCE(sat) Base-Emitter Saturation Voltage Base-Emitter Turn-On Voltage VBE(sat) VBE(on) DC Current Gain Test Condition IC = -100A, IE = 0 IC = -10mA, IB = 0 IE = -100A, IC = 0 VCB = -30V, IE = 0 VCB = -30V, VBE = 0 VEB = -4V, IC = 0 IC = -0.5A, IB = -5mA IC = -1A, IB = -10mA IC = -2A, IB = -50mA IC = -3A, IB = -300mA IC = -3A, IB = -300mA IC = -3A, VCE = -2V IC = -10mA, VCE = -2V IC = -500mA, VCE = -2V IC = -1A, VCE = -2V IC = -2A, VCE = -2V IC = -3A, VCE = -2V AC CHARACTERISTICS Switching Times Notes: IC = -50mA, VCE = -5V, f = 50MHz VCB = -10V, f = 1MHz IC = -500mA, VCC = -10V, IB1 = -IB2 = -50mA 8. Measured under pulsed conditions. Pulse width* 300s. Duty cycle * 2%. POWERDI is a registered trademark of Diodes Incorporated. DXT790AP5 Document number: DS31800 Rev. 3 - 2 4 of 7 www.diodes.com June 2013 (c) Diodes Incorporated A Product Line of Diodes Incorporated DXT790AP5 Typical Electrical Characteristics (@TA = +25C, unless otherwise specified.) 1.0 1 IC/IB=100 -VCE(SAT) (V) -VCE(SAT) (V) Tamb=25C 100m IC/IB=100 10m IC/IB=40 0.8 -55C 0.6 25C 0.4 100C 0.2 IC/IB=10 1m 10m 100m 1 0.0 1m 10 -IC Collector Current (A) 450 25C 360 0.6 270 0.4 180 -55C 0.2 0.0 1m 90 10m 100m 1.0 -VBE(SAT) (V) 540 1.0 0.8 630 Typical Gain (hFE) Normalised Gain 1.2 VCE=-2V 100C 0.6 25C 100C 0.4 1m hFE v IC -VBE(ON) (V) IC/IB=100 -55C -IC Collector Current (A) 1.0 1 0.8 0 10 1 100m VCE(SAT) v IC VCE(SAT) v IC 1.4 10m -IC Collector Current (A) 10m 100m 1 -IC Collector Current (A) 10 VBE(SAT) v IC VCE=-2V 0.8 -55C 0.6 25C 0.4 0.2 1m 100C 10m 100m 1 -IC Collector Current (A) 10 VBE(ON) v IC POWERDI is a registered trademark of Diodes Incorporated. DXT790AP5 Document number: DS31800 Rev. 3 - 2 5 of 7 www.diodes.com June 2013 (c) Diodes Incorporated A Product Line of Diodes Incorporated DXT790AP5 Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version. A D D2 A2 b2 L E E2 E1 W L1 e b1 b1 A2 POWERDI5 Dim Min Max A 1.05 1.15 A2 0.33 0.43 b1 0.80 0.99 b2 1.70 1.88 D 3.90 4.05 D2 3.054 Typ E 6.40 6.60 e 1.84 Typ E1 5.30 5.45 E2 3.549 Typ L 0.75 0.95 L1 0.50 0.65 W 1.10 1.41 All Dimensions in mm Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. X Y X1 (2x) G Y1 (2x) Dimensions C G X X1 Y Y1 Value (in mm) 1.840 0.852 3.360 1.390 4.860 1.400 C POWERDI is a registered trademark of Diodes Incorporated. DXT790AP5 Document number: DS31800 Rev. 3 - 2 6 of 7 www.diodes.com June 2013 (c) Diodes Incorporated A Product Line of Diodes Incorporated DXT790AP5 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2013, Diodes Incorporated www.diodes.com POWERDI is a registered trademark of Diodes Incorporated. DXT790AP5 Document number: DS31800 Rev. 3 - 2 7 of 7 www.diodes.com June 2013 (c) Diodes Incorporated