RTD14012AP - TE CONNECTIVITY - Datasheet.Directory

04-2011, Rev. 0411

www.te.com

a TE Connectivity Ltd. company

Datasheets and product speciﬁcation

according to IEC 61810-1 and to be used

only together with the ‘Deﬁnitions’ section.

Datasheets and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Datasheets, product data, ‘Deﬁnitions’ sec-

tion, application notes and all speciﬁcations

are subject to change.

SCHRACK

General Purpose Relays

PCB Relays

Power PCB Relay RT1-AP

n 1 pole 12A/16A, 1 form C (CO) or 1 form A (NO) contact

n Sensitive coil 400mW

n 5kV/10mm coil-contact, reinforced insulation

n Ambient temperature 85°C

n WG version: product in accordance to IEC 60335-1

Typical applications

Boiler control, timers, garage door control, POS automation, interface

modules

Approvals

VDE REG.-Nr. 6106, UL E214025, cCSAus 14385

Technical data of approved types on request

Contact Data 12A 16A

Contact arrangement 1 form C (CO) or 1 form A (NO)

Rated voltage 250VAC

Max. switching voltage 400VAC

Rated current 12A 16A

Limiting continuous current 12A 16A, UL: 20A

Limiting making current

max. 4s, duty factor 10% 25A 30A

Breaking capacity max. 3000VA 4000VA

Contact Material AgNi 90/10

Frequency of operation, with/without load 360/72000h-1

Operate/release time max., DC coil 8/6ms

Bounce time max., DC coil, form A/form B 4/6ms

Contact ratings

Type Contact Load Cycles

IEC 61810

RT314 DC-coil A (NO) 16A, 250VAC, cosφ=1, 85°C 30x103

RT314 DC-coil C (CO) 16A, 250VAC, cosφ=1, 85°C 10x103

RT314 DC-coil A (NO) 10A, 400VAC, cosφ=1, 85°C 150x103

RT114 DC-coil A (NO) 12A, 250VAC, cosφ=1, 85°C 50x103

RT114 AC-coil A (NO) 12A, 250VAC, cosφ=1, 70°C 100x103

UL 508

RT314 A/B (NO/NC)

20A, 250VAC, general purpose, 85°C

6x103

RT334 A (NO)

16A, 250VAC, gen. purpose, 85°C

50x103

RT314 A (NO) 1hp, 240VAC, 40°C 1x103

EN60947-5-1

RT314 DC-coil A/B (NO/NC) 2A, 24VDC, DC13 6.050

EN60730-1

RT314 DC-coil A (NO) 12(2)A, 250VAC, 85°C 100x103

Mechanical endurance >30x106 operations

Coil Data

Coil voltage range 5 to 110VDC

Operative range, IEC 61810 2

Coil insulation system according UL class F

Coil versions, DC coil

Coil Rated Operate Release Coil Rated coil

code voltage voltage voltage resistance power

VDC VDC VDC Ω±10% mW

005 5 3.5 0.5 62 403

006 6 4.2 0.6 90 400

009 9 6.3 0.9 200 400

012 12 8.4 1.2 360 400

024 24 16.8 2.4 1440 400

048 48 33.6 4.8 5520 417

All ﬁgures are given for coil without pre-energization, at ambient temperature +23°C.

Other coil voltages on request.

Insulation Data

Initial dielectric strength

between open contacts 1000Vrms

between contact and coil 5000Vrms

Clearance/creepage

between contact and coil ≥10/10mm

Material group of insulation parts IIIa

Tracking index of relay base PTI 250V

F0144-C

ZVb

04-2011, Rev. 0411

www.te.com

a TE Connectivity Ltd. company

Datasheets and product speciﬁcation

according to IEC 61810-1 and to be used

only together with the ‘Deﬁnitions’ section.

Datasheets and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Datasheets, product data, ‘Deﬁnitions’ sec-

tion, application notes and all speciﬁcations

are subject to change.

SCHRACK

General Purpose Relays

PCB Relays

Power PCB Relay RT1-AP (Continued)

Accessories

For details see datasheet

Accessories Industrial Power Relay RT

NOTE: indicated contact ratings and electrical endurance data for direct

wiring of relays (according IEC 61810-1); for relays mounted on sockets

deratings may apply.

Other Data

Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content

refer to the Product Compliance Support Center at

www.te.com/customersupport/rohssupportcenter

China RoHS compliance no hazardous material over threshold

Resistance to heat and ﬁre

WG version according EN60335, par30

Ambient temperature -40 to 85°C

Category of environmental protection

IEC 61810 RTII - ﬂux proof, RTIII - wash tight

Vibration resistance (functional),

form A/form B contact, 30 to 500Hz 20g/5g

Shock resistance (destructive) 100g

Terminal type PCB-THT, plug-in

Weight 14g

Resistance to soldering heat THT, IEC 60068-2-20

RTII 270°C/10s

RTIII 260°C/5s

Packaging/unit tube/20 pcs., box/500 pcs.

PCB layout / terminal assignment

Bottom view on solder pins

Dimensions

12 A, pinning 3.5 mm

1 form C (CO) contact

1 form A (NO) contact

12 A, pinning 5 mm

1 form C (CO) contact

1 form A (NO) contact

16 A, pinning 5 mm

1 form C (CO) contact

1 form A (NO) contact

S0418-CB S0418-CN S0418-CA

S0163-BES0163-BCS0163-BG

S0163-BH S0163-BD S0163-BF

S0272-BB

*) With the recommended PCB hole sizes a grid

pattern from 2.5 mm to 2.54 mm can be used.

04-2011, Rev. 0411

www.te.com

a TE Connectivity Ltd. company

Datasheets and product speciﬁcation

according to IEC 61810-1 and to be used

only together with the ‘Deﬁnitions’ section.

Datasheets and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Datasheets, product data, ‘Deﬁnitions’ sec-

tion, application notes and all speciﬁcations

are subject to change.

SCHRACK

General Purpose Relays

PCB Relays

Power PCB Relay RT1-AP (Continued)

Product code Version Contacts Contact material Coil Version Part number

RT114024AP 12A, pinning 3.5mm, 1 form C (CO) AgNi 90/10 24VDC standard 1-1649326-5

RT134024AP ﬂux proof 1 form A (NO) 3-1649326-3

RT214024AP 12A, pinning 5mm, 1 form C (CO) 1-1649327-5

RT234024AP ﬂux proof 1 form A (NO) 3-1649327-3

RT314012AP 16A, pinning 5mm, 1 form C (CO) 12VDC 1-1649328-3

RT314012WGAP ﬂux proof contact IEC60335-1 compliant 5-1833002-0

RT314024AP 24VDC standard 1-1649328-5

RT314048AP 48VDC 1-1649328-6

RT334012AP 1 form A (NO) 12VDC 3-1649328-1

RT334024AP contact 24VDC 3-1649328-3

RTD14012AP 16A, pinning 5mm, 1 form C (CO) 12VDC 1649328-4

RTD14024AP wash tight contact 24VDC 1649328-6

RTD34012AP 12VDC 2-1649328-2

RTH34012AP 16A, 105°C, 5mm, 1 form A (NO) 1-1649357-3

RTH34012WGAP wash tight contact IEC60335-1 compliant 5-1833004-0

This list represents the most common types and does not show all variants covered by this datasheet.

Other types on request

Product code structure Typical product code RT 3 1 4 024 AP

Type

RT Power PCB Relay RT1

Version

1 12A, pinning 3.5mm, ﬂux proof

2 12A, pinning 5mm, ﬂux proof *)

3 16A, pinning 5mm, ﬂux proof

B 12A, pinning 3.5mm, wash tight

D 16A, pinning 5mm, wash tight

Contact arrangement

1 1 form C (CO) contact

3 1 form A (NO) contact

Contact material

4 AgNi 90/10

Coil

Coil code: please refer to coil versions table

Version

AP Standard version

WGAP Product in accordance with IEC 60335-1 (domestic appliances)

*) Wash tight version on request