•221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798•
• World Wide Web Site - www.sensitron.com • E-Mail Address - sales@sensitron.com •
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 4146, REV. B
LOW RDS HERMETIC POWER MOSFET - N-CHANNEL
FEATURES:
• 100 Volt, 0.011 Ohm, 90A MOSFET for Glidcop version
• Isolated Hermetic Metal Package
• Ultra Low RDS (on)
• Ceramic Seals with Glidcop leads (SHDCG225701)
MAXIMUM RATINGS ALL RATINGS ARE AT TC = 25°C UNLESS OTHERWISE SPECIFIED.
RATING SYMBOL MIN. TYP. MAX. UNITS
GATE TO SOURCE VOLTAGE VGS - -
±20 Volts
ON-STATE DRAIN CURRENT ID25 - - 55* Amps
PULSED DRAIN CURRENT IDM - - 240 Amps
OPERATING AND STORAGE TEMPERATURE TJ/TSTG -55 - +150 °C
TOTAL DEVICE DISSIPATION PD - - 210 Watts
THERMAL RESISTANCE, JUNCTION TO CASE RθJC - - 0.6
°C/W
Note: * current limited by package; die rating is 90A
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC SYMBOL MIN. TYP. MAX. UNITS
DRAIN TO SOURCE BREAKDOWN VOLTAGE
VGS = 0V, ID = 250µA
BVDSS 100 - - Volts
STATIC DRAIN TO SOURCE ON STATE RESISTANCE
VGS = 10V, ID = 30A
RDS(ON)
Glidcop
Version
-
0.011
0.013
Ω
STATIC DRAIN TO SOURCE ON STATE RESISTANCE
VGS = 10V, ID = 30A
RDS(ON)
Standard
Version
-
0.013
0.015
Ω
GATE THRESHOLD VOLTAGE VDS = VGS, ID = 250µA VGS(th) 2 - 4 Volts
FORWARD TRANSCONDUCTANCE
VDS = 15V, ID = 30A
gfs 25 - - S(1/Ω)
ZERO GATE VOLTAGE DRAIN CURRENT
VDS = 0.8 x Max. rating, VGS = 0V, TJ = 25°C
TJ = 125°C
IDSS
-
-
1
50
µA
GATE TO SOURCE LEAKAGE FORWARD VGS = 20V
GATE TO SOURCE LEAKAGE REVERSE VGS = -20V
IGSS - - 100
-100
nA
TURN ON DELAY TIME VDD = 50V
RISE TIME ID = 55A
TURN OFF DELAY TIME VGS=10V
FALL TIME RG = 2.5Ω
td(ON)
tr
td(OFF)
tf
- 20
110
65
100
30
170
100
150
nsec
DIODE FORWARD VOLTAGE IF = 30A, VGS = 0V
Pulse test, t ≤ 300 µs, duty cycle d ≤ 2 %
VSD - 1.0 1.2 Volts
REVERSE RECOVERY TIME TJ = 25°C,
IF=30A, VR = 100V
di/dt = 100A/µsec
trr
-
70
140
nsec
INPUT CAPACITANCE VGS = 0 V,
OUTPUT CAPACITANCE VDS = 25 V,
REVERSE TRANSFER CAPACITANCE f = 1.0MHz
Ciss
Coss
Crss
- 8700
740
450
-
pF
SHD225701
SHDCG225701
•221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798•
• World Wide Web Site - www.sensitron.com • E-Mail Address - sales@sensitron.com •
SENSITRON
TECHNICAL DATA
DATA SHEET 4146, REV. B
MECHANICAL DIMENSIONS: in Inches / mm
DEVICE TYPE PIN-1 PIN-2 PIN-3
N-CHANNEL MOSFET
TO-254 PACKAGE
DRAIN SOURCE GATE
SHD225701
SHDCG225701
123
.260
.249
(6.60
6.32)
.050
.040
(1.27
1.02)
.150(3.81) BSC
.545
.535
(13.84
13.58)
.545
.535
(13.84
13.60)
.800
.790
(20.32
20.07)
.685
.665
(17.40
16.89)
1.235
1.195
(31.37
30.35)
.045
.035
(1.14
0.89)
3 Places
.150(3.81) BSC
2 Places
.149
.139
(3.78
3.53) Dia.
TO-254
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
