PT-10 10 mm Carbon Potentiometer FEATURES MECHANICAL SPECIFICATIONS Carbon resistive element Dust proof enclosure Polyester substrate Also upon request: Wiper positioned at 50% or fully clockwise. Supplied in magazines for automatic insertion. Long life model for low cost control potentiometer applications Self extinguishable plastic UL 94V-0 Cut track option Special tapers Mechanical detents Low & extra low torque versions Special switch option 3% Linearity and 100K cycles mechanical life ELECTRICAL SPECIFICATIONS Range of values (*) Mechanical rotation angle: 235 5 Electrical rotation angle: 220 20 Torque: 0.4 to 2 Ncm. (0.6 to 2.7 in-oz) Stop torque: > 5 Ncm. ( >7 in-oz) Life*: Up to 10.000 cycles Tolerance (*): 20% 30% Max. Voltage: 200 VDC (lin) 100 VDC (no lin) Nominal Power 50C (122F) (see power rating curve) 0.15 W (lin) 0.07 W (no lin) Taper (*) (Log. & Alog. only Rn 1K) Lin ; Log; Alog. Residual resistance(*): Equivalent Noise Resistance: Operating temperature**: -25C + 70C (-13F + 158F) * Others upon request (*) Others upon request ** Up to 85C depending on application HOW TO ORDER OPTIONAL EXTRAS PT 10 L H01 Code Mounting Method Series PT-10 Rotors G L M K X W Y Z R H01 H05 H02 H10 V05 V10 V11 V13 A 2020 S Taper Life Detent A = Lin. B = Log. C = Alog. E= Long life See PT's with detents data sheet (See note 5) Value 101 = 100 504 = 500 K 505 = 5 M (4) (5) (6) (7) (8) (9) 2020 = 20% 3030 = 30% (See note 4) RO = Red NE = Black VE = Green AM = Yellow AZ = Blue MA = Brown GR = Grey NA = Orange CR = Cream Torque = Standard L= Low Torque X = Extra Low Torque (See note 9) (See note 8) Cut track Magazine Flammability Wiper position PCI = Initial PCF = Final T I = Non flammable PM = 50% PF = Final (See note 6) (See note 7) "Z" adjustment only available on "H" versions. Rotor "G" only available in purple (shaft/rotor colour "VI"). Terminals styles: "P" & "J" are crimped terminals. V=Vertical adjust; H=Horizontal Adjust Value Example: Code: 10 1 Numb of zeros First two digits of the value. Non standard tolerance, upon request. Example: +7% Code: 07 05 -5% negative tolerance Up to 10.000 cycles. positive tolerance Others upon request. Magazines: not available with the H10, V05 and V13 models, nor with adjustment types X, W, Y, Z. Non flammable: housing, rotor and shaft. According to UL 94V-0 Potentiometer with shaft: only shaft Potentiometer without shaft: only rotor Colour shaft/ rotor: Cream colour only available in standard plastic. Low Torque: 0.25 to 1 Ncm (per pot.) Extra Low Torque: 0.1 to 0.4 Ncm (per pot.). Only available on "H" models without crimping No detent option available for low and extra low torque models. No shaft or thumbwheel option for extra low torque models NOTE: The information contained here should be used for reference purposes only. www.piher.net 01 = Fig. 1 02 = Fig. 2 Tolerance (See note 3) (1) (2) (3) Shaft/Thum. Shaft/rotor colour 17 = Fig. 17 (See note 2) (See note 1) NOTES: H2.5 H5 H2.5P H5P V5 V VP VJ 101 39 HOW TO ORDER CUSTOM DRAWING PT-10 LH 01 + STANDARD OPTIONS Cut track Detents Packing Non flammable Rotor colour Shaft colour Wiper position Torque DRAWING NUMBER (Max. 16 characters) This way of ordering should be used for options which are not included in the "How to order" standard and optional extras. No None Bulk No White Natural Initial Standard ROTORS 0.05 2 0.7 With shaft 2.1 -0.1 0.05 0.05 2.2 0.05 1.6 2 0 .05 +0.1 2 2.2 0.8 0.05 +0.1 Without shaft L = Screwdriver thru hole K = Cross slot G = Hexagonal thru hole thru hole thru hole Wipers positioned at 50% M = Hexagonal L L R X= Adjustable from collector side W= Adjustable from terminal side With thumbwheel 6.2 6.2 0.8 3.5 3.5 7 7 3 3 0.8 1.95 Y = Adjustable from terminal side 3.45 Z = Adjustable from collector side MOUNTING METHODS h = vertical mount horizontal adjust v = horizontal mount vertical adjust +0.1 10.3 + 4.5 0.2 1.3 S 4.5 +0.1 2.5 3.5 5 7 +0.2 E E A 5 3.5 2.5 + 1 0.1 2.5 2.5 S +0.1 1.3 3.5 6 +0.1 12.1 +0.2 5 5 10 10 5 5 5 10.3 4 A +0.2 +0.2 + 1 0.1 4.5 +0.1 3.5 5 v (5) +0.1 10.3 +0.2 2.5 2.5 5 5 3 + 6 0.2 E = Final 5 5 1.3 S = Wiper 7 +0.1 2.5 10.3 A = Initial 1.3 5 3.5 2.5 + 1 0.1 2.5 + 1 0.1 5 +0.1 3.5 + 4.5 0.2 h (2.5) E = Final +0.2 S = Wiper 12.1 +0.2 A = Initial 2.5 v (10) h (5) NOTE = Please note relative terminal positions when ordering non linear tapers. Crimped terminals Detail +0.3 1.6 -0.1 A +0.2 +0.2 6 9.3 9.3 Mod. J Mod. P 6 www.piher.net 40 -0.1 0.9 OPTIONS Positioning (Std. Position = CCW) Special SWITCH (Upon request) P.M. 50% +20 P.F. INITIAL CCW FINAL CW (Rotor at Final Position) Mechanical Rotation Angle: 45 Housing Colour: Green CUT TRACK CCW on-off (A) A CW on-off (E) E A S E A = Initial A S E = Final A E E S = Wiper TAPERS POWER RATING CURVE Standard W (%) Special taper example 100% Rn A = Linear B = Log. C = Alog. 100 % C R 2 + 5% A B 40 % 50 70 C NOTE = Please note relative terminal positions when ordering non linear tapers. TESTS TYPICAL VARIATIONS ELECTRICAL LIFE 1.000 h. @ 50C; 0.15 W 5 % MECHANICAL LIFE (CYCLES) 500 @ 10 CPM ...15 CPM 3 % (Rn < 1 M ) TEMPERATURE COEFFICIENT 25C; +70C 300 ppm (Rn <100 K) THERMAL CYCLING 16 h. @ 85C; 2h. @ 25C 2.5 % DAMP HEAT 500 h. @ 40C @ 95% HR 5 % VIBRATION (for each plane X,Y,Z) 2 h. @ 10 Hz. ... 55 Hz. 2 % NOTE: Out of range values may not comply these results. PACKAGING BOXES 540 +1.5 Units Without shaft 500 (40 x 85 x 185 mm.) With thumbwheel 400 (40 x 85 x 185 mm.) With shaft 200 (40 x 85 x 185 mm.) Magazines for PT-10 h 2.5; h 5 18.9 Model 7.6 Also crimped term. h 2.5 P 540 +1.5 AUTOMATIC INSERTION P T- 1 0 H & P T- 1 0 V Units per magazine Magazines for PT-10 V 13.5 Magazines Also crimped term. VP 50 Pieces 12 www.piher.net 41 SHAFTS 3.1 5 8.1 5 2.6 3.7 8.4 34 10.4 10 3 Fig. 2 / Ref. 5053 4.9 Fig. 6 / Ref. 5035 8.1 4.9 2.6 25.5 25.5 Fig. 4 / Ref. 6053 12.5 4.9 15.2 4.9 Fig. 3 / Ref. 5012 6.75 Fig. 1 / Ref. 5016 Fig. 7 / Ref. 5115 Fig. 8 / Ref. 5116 Fig. 9 / Ref. 5119 Fig. 10 / Ref. 5120 Fig. 11 / Ref. 5027 4.9 2- GANG Plastic Knob/ Plastic Shaft* 25 4.5 8.1 3.3 O6 6.75 15.2 13 5 O1.3 2.5 5 Fig. 12 / Ref. 6052 Fig. 13 / Ref. 5121 Fig. 18 / Ref. 6064 Fig. 14 / Ref. 5055 * Delivered unassembled (For assembled contact your nearest PIHER supplier) THUMBWHEELS 12 1.5 9.5 21 1 1 5 11.5 Fig. 5 / Ref. 5034 www.piher.net Fig. 15 / Ref. 6008 Fig. 16 / Ref. 5039 42 Fig. 17 / Ref. 5062