8 6 i, 3 DRW NO. SH REV v ( -4.99-5100-500 1] BACKPLANE MODULE ZONE REV SCR NO. DESCRIPTION BY DATE APPROVED ASSEMBLY PART NUMBER ASSIGNMENT A 29626 ADDED CONTACT LOAD 4 = 5.15 JSG 12/11/99 J. DUNHAM 499 - X TXX - XX xX B 1.0858 COMPLETE REDRAW SG 1/23/03 WLI MODULE CONFIGURATION _J- Tisicvat covracr LOAD (SEE TABLE 2) S020 oO _ ft +k x [2-00] (L) * C | WLII-SUHLXM.VERO2 REVISE DATUMS, ADD TABLE 6 SG/ML 1/22/01 WLI +e LTS a) D | KLEC-66RSHX.VERO1 ADDED NOTES 17 & 18 SG 9/18/04 | LEBLANC ASSEMBLY TYPE 2 = 6.25 2 - CUSTOM LOAD. LEAD FREE 3 = 4.5 | DMAG-6BTGTK.VERO Bee tN CN LING GKR 05/13/05 S.BAIR |p Ne Ee cu (5 6 ~ UNI LOAD, BRUSH PLATING CODE eo eee rAd BRUse ORIENTATION PLATING CODEN) i F | SBAR-6NLKJT.VERO1 MODIFIED TABLES 2 & 3 HCL 05/08/06 | K.LEBLANC 8 - ADVANCED MATE, UNIFORM LOAD 702x - 4 - 739 5 - 803 Fac ee ce ex) 9 - ADVANCED MATE, UNIFORM LOAD BRUSH 2269 6 806 f G | CSAS-6QYKSW .VERO1 ocr) POL PIN DoN IN TABLES HCL-CY 06/22/06 | C.SAMMIS L = CUSTOM LOAD, LEADED, ADVANCED PLATING 3 = 768 7 = B05 A MH N= CUSTOM LOAD, LEAD FREE, ADVANCED PLATING meee of / | H | MCHU-6U9JW J.VERO1 NOTE 7 UPDATED HCL-AP 11/12/06 |K.LEBLANC COLUMNS (SEE TABLE 1) POLARIZING PIN @) 1.75] | J | KLEC-6VRLRW.VERO1 | DIM M WAS 19.00 AND 49.00 RESP | HCL-RK 12/07/06 | K.LEBLANC 10 = 10 COLUMN MODULE ORIENTATION CODE (SEE TABLE 4) 21.6 ) 25 = 25 COLUMN MODULE 6.87 D E F 7 X 12.25} = (15.75) K KLEC-6XBBZ6.VERO1 ADDED P DIM IN TOP VIEW HCL-BS 01/15/07 K .LEBLANC TABLE 1 y ADDED NEW PART NUMBERS ASSEMBLY BACKPLANE GUIDANCE K (L) M p TOTAL NUMBER OF TOTAL NUMBER OF ! ! O ) FOR NEW PLATING CODES PART NUMBER POLARIZING MODULE SIGNAL CONTACTS GROUND SHIELDS XO IN ASSEMBLY PART NUMBER 499-(5,6,8,9)125-XXX 499-0125-070 24 | (48.00) 48.00 57 150 25 ) L_ AND REMOVED NOTE 16. TABLE 3 (SEE DETAIL W. SHT 2) H REMOVED TABLE 6. ASSEMBLY TABLE 2 PART NUMBER |SIELD CONTACT |CONTACT LENGTH <= _ 0.55 SAT NUMBER SIGNAL CONTACT {CONTACT LENGTH 499-51XX-XXX_| 279-0022- @) 5.3 4.99-61XX-XXX_ | 279-0002- (1 5.3 HK X |2.00] = (L) 499-(5,B)IXX-XX2_| 260-0021- (1) 6.25 499-91XX-XXX | 279-0004- (7) 5.5 . 18.85 . UIDE PIN 499-(5,8)1XX-XX3 260-0023- (7) 4.25 C 499-(5,8)1XX-XX4 260-0024- [7 5.15 4.99-(6,9)1XX-XX1_| 260-0002- 2 4.75 TABLE 5 3.68 J (2 | ! . GUIDE/POLARIZING PIN | PART NUMBER | N | P S 1B0.300 Tale B SOLARIZING PIN 499-(6,9)1XX-XX2_ | 260-0001- 6.25 STANDARD GUIDE PIN | 564-0385-553 | 19.3 | - oN 499-(6,9)1XX-XX3_|_260-0003- J) 4.29 CUSTOM GUIDE PIN | 564-0420-553 | 17.3 | - Th 0.29 516 4.99-(6,9)1XX-XX4 | 260-0004- (J 5.15 CUSTOM GUIDE PIN 564-0487-553 | B.A | - A } a STANDARD POL PIN 564-0387-540 - 12.6 CUSTOM POL PIN 564-0457-553 | - | 12.6 ONTACT MATING 7 0.40 S SURFACE {0.40 [A IC TABLE 4 O SHIELD MATING N SURFACE SFE DETAIL 8B p SEE TABLE 5 q PART NUMBER |_| SEE TABLE 5 9 9 q Lt \ F RN J | A INSULATOR | | | SEE TABLE 1 r POLARIZING PIN .- -- _ | ff ff (\ ORIENTATION SHIELD HEIGHT CONTACT LENGHT 3 SEE TABLE 2 . DETAIL B Ns SEE TABLE 3 SEE DETAIL U SCALE 15/1 | \ 6.5 | ) pb] q | 45. DATUM -G- 1S DEFINED AS THE CENTERLINE OF THE CONNECTOR MEASURED FROM THE TWO OUTERMOST ROWS OF SIGNAL CONTACTS TAIL SIDE. og oo a 14. DATUM -F- |S DEFINED AS THE BOTTOM OF THE PLASTIC INSULATOR. 7 " " 2 - 0.55 43. DATUM -E- IS DEFINED AS THE CENTERLINE OF THE CONNECTOR MEASURED FROM THE TWO OUTERMOST COLUMNS OF SIGNAL CONTACTS TAIL SIDE. LC . 75 1 ; 45.75 42. DATUM -C- IS DEFINED AS THE CENTERLINE OF THE CONNECTOR MEASURED FROM THE TWO OUTERMOST COLUMNS OF SIGNAL CONTACT HOLES. (4) - M (TAIL LENGTH) os 41. DATUM -B- IS DEFINED AS THE CENTERLINE OF THE TOP OF THE OUTERMOST WAFER SLOTS IN THE INSULATOR WALLS. & H0.25 |F IE |G SEE DETAIL A 10. DATUM -A- |S DEFINED AS THE WAFER MATING SURFACE OF THE PLASTIC INSULATOR. ot SECTION Z-Z 9. ROUTE DIFFERENTIAL PAIRS THROUGH ROWS A-B, D-E, AND G-H. (6) FOR HASL FINISH ONLY, PTH TO BE 0.61 - G0.495 mm. 0 @ (7 LAST THREE DIGITS OF THE SIGNAL CONTACT AND SHIELD CONTACT PART NUMBERS ARE DETERMINED BY THE PLATING CODE. | 0.25 MAY = MATCHES PLATING DEFINED BY 9th DIGIT OF ASSEMBLY PART NUMBER. 2 735 - Ni SULFAMATE, STANDARD GOLD, LEADED 6.25 Q 2 732 - Ni SULFAMATE, HIGH GOLD, LEADED C oS 769 - Ni SULFAMATE, STANDARD GOLD, LEAD-FREE 125 4.75 5.15 QL 768 - Ni SULFAMATE, HIGH GOLD, LEAD-FREE XO 804 - NANO Ni, STANDARD GOLD, LEADED > 6h 0 803 - NANO Ni, HIGH GOLD, LEADED ~ ~ L Ga 806 - NANO Ni, STANDARD GOLD, LEAD-FREE LY Ss 805 - NANO Ni. HIGH GOLD, LEAD-FREE | S IE MODULE PART NUMBER IS &99-7XXX-XXX OR 499-2XXX-XXX OR &499-LXXX-XXX OR 499-NXXX-XXX: L \ . S INSULATORS S PART REVISION, MODULE ORIENTATION, NUMBER OF COLUMNS AND SIGNAL CONTACT LOAD ARE NOT APPLICABLE. oO PART MARKING AS FOLLOWS: TOLERANCES | DESIGN. 1179/98 @ LINE 4; ATCSYYWWDHH (LOGO, YEAR, WEEK, DAY, HOUR) 00 10.95 J-GIROUX Amphenol TCS = LINE 2: MODULE PART NUMBER(499 44H). DRAWN 2/10/99 A Division of Amphenol Corporation Ft LINE 3: WORK ORDER NUMBER(VHa######), WHERE DENOTES MANUFACTURING LOCATION. _ 0.00. 140.13 J. GIROUX 200 Innovative Way, Nashua, NH 08062 603.878.2000 0.20 SQ. CHK = 4/2799 TITLE = SO OPEN, NOTCH END DESIGNATES COLUMN 1. DETAIL U F 0.000 |+ - T. DO BACKPLANE LEFT ENDED MODULE <= SCALE 10/1 D0.25 E |G APVD 4/2/99 8 ROW DIFFERENTIAL VHDM-HSD (3) SHIELDS SHALL BE STRAIGHT WITH MAXIMUM ALLOWABLE BOW OF 0.15 MILLIMETERS SFE TABLE 2 ANGLES | + - (. MURPHY taaar ac a ON EITHER SIDE OF SHIELD. SEE DETAIL X". DETAIL A UNLESS OTHERWISE SPECIFIED DIMENSIONS SEE PART NUMBER TREE N/A (2) WHEN ASSEMBLED TO BACKPLANE INSULATOR, CONTACTS MUST SEAT FLUSH WITH INSULATOR TOP SURFACE ARE IN MM, DECIMAL MARKER |S A PERIOD SCALE 10/1 DRAW ING NO. REV TO A MAXIMUM ALLOWABLE GAP OF 0.25. {} ( -499-5100-500 L CUSTOMER USE Prove type: P1006-BP-D IFF-SHROUD-LEFT-10 | 1.77 NOTES: POLARIZING PIN MUST ALIGN AS INDICATED BY PART NUMBER CODE. (SEE TABLE 4) POA Type: OF INSURE PROPER ALIGNMENT, THE OCTOGONAL BASE PORTION OF THE PIN MUST BE POSITIONED INTERPRET PER ASME 14.5M DRAW ING Pro/ DRAWING: C-499-5100-500 | 1.0 INTO THE CORESPONDING MOLDED CAVITY. CODE IDENT 31413 SIZE D SCALE 4/1 SHEET 1 OF 2 8 7 6 5 4 3 ? 43 DRW NO. SH REV 8 7 6 5 v 4 C-499-5100-500 2 L ZONE |REV SCR NUMBER DESCRIPTION BY DATE APPROVED SEE SHEET 1 DAUGHTERC ARD 10.00 SIGNAL CONTACT STGNAL COLUMN [A POSITION 1 or ROW A it ( 7 =e | 1H | | = SS SS SSS ae | | i Ay Q| | B PaN : fo N I | Pe DEF 1 OO SIGNAL COLUMN AUGHTERCARD = | ws I CONNECTOR SIDE EHO i Cyt 7 a itr 7 = I 3 Py THT TTT TT CATTLE | <r | | 1 | | 5 5 Y | | Ol | f | ; | | | || 4 i Opoo OO0000COCKY I 4, B POLARIZING PIN TT | | I | U | | ale P SHOWN IN | | | > POSITION G LL = | | ) alall |p @ P \ ml | | F QD D O|l| @ > ROW A 0.41 OFFSET <) : | | y , / | od | fe) PoP Shao) | hdond |) told 14.21 we an " OC} 10} oO 1O} o .. -- - = Oo fe) so aucnrere aga BY | x [2.00])-() A SIGNAL CONTACT PCB_REF_PLANE L/-~< Li fT ,00) +{= (0.41) OFFSET -REF - B | 2.00) _ SEE DETAIL V POSITION 1 rf (2.00) ACKPLANE 2.45 ROW A ADJACENT PIN D HE SIGNAL PIN COLUMN FOR BACKPLANE SHE TLD SIGNAL CONTACT CONTINUOUS GRID 5 7 SIGNAL ROWS GROUND ROWS ~ ~ eee BACKPLANE OW A | SIGNAL ROWS j - - 666 NSN q SIGNAL ROWS ~ eee I ty [2.25] = 115.75) N SW 7 7 -- 666 Y NK | L DOT 2.64 _ _ 66 DETAIL V NN L F ly NO SCALE 2 UC UUYUUFUTUCUTCTSCS 9 C vy TT =F 7 FF 7" - - eo [ - - 1.8 MIN | INITIAL ENGAGEMENT BOARD ROUND (2.25) (CUTAWAY FOR CLARITY) \. SCALE 3/1 B-O! pty 279 -0004-XXX 0.51 279-0002-XXX nowt > 10.10 |X |Y ADVANCED MATE SAEILD STANDARD MATE SHEILD [10.00 | 0.660 10.026] DRILL B1.00 PAD BACKPLANE HOLE PATTERN = = D Oo SIGNAL WITH GUIDANCE/POLAR IZING t I | lI I ill lI f f 6 l l l l < Uy I DETAIL W Ga SCALE 3/1 S DESIGN 1179799 TOFERANEES "J.GIROUX Amphenol TCS 0.0 +0.25 | opawn 2/10/99 A Division of Amphenol Corporation moe (8. STANDARD GUIDE PIN (564-0385-553) AND STANDARD POLARIZING PIN (564-0387-540) ARE IN STANDARD 5000 SERIES MODEL ASSEMBLIES. ANY GUIDE 500 |a005 J. GIROUX 200 innovative Way, Nashua, NH 03062 603.879.9000 PIN OR POLARIZING PIN OTHER THAN THESE STANDARD NUMBERS WILL RESULT IN CUSTOM 7XXX, 2XXX, LXXX AND NXXX SERIES MODULE ASSEMBLIES BEING ASSIGNED. CHK 4/2/99 TITLE = 0.000 |+ - T. DO BACKPLANE LEFT ENDED MODULE < USING GUIDE PINS THAT ARE SHORTER THAN THE STANDARD HEIGHT OF 19.3mm AND POLARIZING PINS THAT ARE SHORTER THAN THE STANDARD ANGLES | seva 4/2/38 er HEIGHT OF 12.6mm MAY NOT PROVIDE THE SUFFICIENT X AND Y AXIS ALIGNMENT AND POLARIZING PROTECTION PRIOR TO COMMENCEMENT OF ALL - C. MURPHY Jpart no. REV COMPONENT MATING SEQUENCES. CONSULT AMPHENOL-TCS APPLICATIONS ENGINEERING PRIOR TO SYSTEMS DESIGN AND COMPONENT SELECTION. UNLESS OTHERWISE SPECIFIED DIMENSIONS SEE PART NUMBER TREE N/A ARE IN MM, DECIMAL MARKER IS A PERIOD DRAW ING NO. REV REMOVED. =} ( -499-5100-500 L CUSTOMER USE Prove type: P1006-BP-D IFF-SHROUD-LEFT-10 | 1.77 NOTES: INTERPRET PER ASME Y14.5M DRAW ING Pro/E DRAWING: C-499-5100-500 | 1.0 CODE IDENT 31473 SIZE 0D SCALE 1/1 SHEET 2 OF 2