SF2001E * * * * RF Filter for Mobile Communication Applications No Matching Circuit Required 3.0 x 3.0 x 1.3 mm Package Complies with Directive 2002/95/EC (RoHS) 1960 MHz SAW Filter Pb Absolute Maximum Ratings Rating Value Units +10 dBm Maximum Input Power DC Voltage on any Non-ground Terminal Storage Temperature Range in Tape and Reel 0 VDC -40 to +85 C 265 C Maximum Soldering Profile, 5 cycles/10 seconds maximum SM3030-6 Electrical Characteristics Characteristic Sym Notes Min Typ Max Units Nominal Operating Frequency fC 1960 Passband Insertion Loss, 1930 -1990 MHz IL 2.35 4.0 dB 1.4 2.4 dBP-P Amplitude Ripple, 1930 -1990 MHz MHz Attenuation Referenced to 0 dB DC to1850 MHz 20.0 32.0 1850 to 1910 MHz 10.0 21.0 dB 2010 to 2040 MHz 4.5 10.0 dB 2040 to 2070 MHz 20.0 50 dB 2070 to 5000 MHz 22.0 29.0 dB 5000 to 6000 MHz 10.0 15.0 VSWR, 1930 to 1990 MHz 1.7 Source impedance ZS Load impedance ZL Operating Temperature TA Case Style dB dB 2.4 50 50 -30 +80 C SM3030-6 3 x 3 mm Nominal Footprint Lid Symbolization (Y=year, WW=week S=shift) 652 YWWS Electrical Connections Connection Input Terminals 2 Output 5 Ground All others CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. 2. 3. 4. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 and measured with 50 network analyzer. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes." www.RFM.com E-mail: info@rfm.com (c)2009-2010 by RF Monolithics, Inc. 5. 6. 7. 8. The design, manufacturing process, and specifications of this filter are subject to change. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. US and international patents may apply. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. Page 1 of 5 SF2001E - 7/21/10 Frequency Characteristics: www.RFM.com E-mail: info@rfm.com (c)2009-2010 by RF Monolithics, Inc. Page 2 of 5 SF2001E - 7/21/10 Reflections Functions: S11 VSWR S22 VSWR www.RFM.com E-mail: info@rfm.com (c)2009-2010 by RF Monolithics, Inc. Page 3 of 5 SF2001E - 7/21/10 SM3030-6 Case 6-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case and PCB Footprint Dimensions Dimension A B C D E F G H I J K L M N O K L N K N Min 2.87 2.87 1.12 0.77 2.67 1.47 0.72 1.37 0.47 1.17 mm Nom 3.00 3.00 1.25 0.90 2.80 1.60 0.85 1.50 0.60 1.30 3.20 1.70 1.05 0.81 0.38 Max 3.13 3.13 1.38 1.03 2.93 1.73 0.98 1.63 0.73 1.43 Inches Nom 0.118 0.118 0.049 0.035 0.110 0.063 0.033 0.059 0.024 0.051 0.126 0.067 0.041 0.032 0.015 Min 0.113 0.113 0.044 0.030 0.105 0.058 0.028 0.054 0.019 0.046 Max 0.123 0.123 0.054 0.040 0.115 0.068 0.038 0.064 0.029 0.056 Case Materials O Materials N M M PCB Footprint Top View Solder Pad Plating 0.3 to 1.0 m Gold over 1.27 to 8.89 m Nickel Lid Plating 2.0 to 3.0 m Nickel Body Al2O3 Ceramic Pb Free Top View Bottom View B 1 3 6 652 YWWS A 2 5 E 4 D www.RFM.com E-mail: info@rfm.com (c)2009-2010 by RF Monolithics, Inc. G C F H 6 1 5 2 4 3 I J Page 4 of 5 SF2001E - 7/21/10 Tape and Reel Specifications "B" REF. 100 REF. Inches "B" millimeters Quantity Per Reel 7 178 500 13 330 3000 See Detail "A" 13. 0 12.0 20 .2 2.0 COMPONENT ORIENTATION 2.0 4.0 A 1.5 1.75 0.3 3.35 B PIN #1 3.35 12.0 5.5 RO.3 (MAX.) B 8.0 A 1.6 1.4 R0.5 (TYP.) 1.5 SECTION A-A SECTION B-B www.RFM.com E-mail: info@rfm.com (c)2009-2010 by RF Monolithics, Inc. USER DIRECTION OF FEED Page 5 of 5 SF2001E - 7/21/10