US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft appr
oval.
Specification subject to change without notice.
Please check web site for latest information.
Chip Inductors
–
1008CS Series (2520)
Document 101-1
Document 101-1 Revised 01/11/12
I
I
J
H
A
B
overall
F
G
E
terminal
F
C
D
Terminal wraparound:
approx 0.010/0,25 both ends
Recommended
Land Pattern
Pick and
place
material
10 100
Frequency (MHz)
Q Factor
1000 10000
100
100
120
90
70
80
60
50
40
30
20
10
0
47 nH
12 nH
330 nH
750 nH
1800 nH
100 nH
Typical Q vs Frequency
Typical L vs Frequency
A B C D
max max max ref E F G H I J
0.115 0.110 0.080 0.020 0.080 0.020 0.060 0.100 0.040 0.050 inches
2,92 2,79 2,03 0,51 2,03 0,51 1,52 2,54 1,02 1,27 mm
-40 -20 020406080100
140
120
Ambient temperature (°C)
120
110
100
90
80
70
60
50
40
30
20
10
0
Percent of rated rmsI
25°C
Irms Derating
• High SRF and excellent Q values
• Tight tolerances, many values at 1%
• 39 inductance values from 10 nH to 8.2 µH
Designer’s Kit C300 contains 10 each of all 5% tolerance values
Core material Ceramic
Environmental RoHS compliant, halogen free
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 29.6 – 37.4 mg
Ambient temperature –40°C to +125°C with Irms current, +125°C
to +140°C with derated current
Storage temperature Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging 2000 per 7″ reel; 7500 per 13″ reel. Plastic tape: 8 mm wide,
0.3 mm thick, 4 mm pocket spacing, 2.0 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf
Note: Height dimension (C) is before optional solder application. For maximum
height dimension including solder, add 0.006 in / 0,152 mm.
US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft appr
oval.
Specification subject to change without notice.
Please check web site for latest information.
1008CS Series (2520)
Document 101-2
Document 101-2 Revised 01/11/12
Inductance2 Percent
SRF min5 DCR max6 Irms7 Color
Part number1 (nH) tolerance3 Q min4 (MHz) (Ohms) (mA) code8
1008CS-100X_L_ 10 @ 50 MHz 5,2 50 @ 500 MHz 4100 0.08 1000 Black
1008CS-120X_L_ 12 @ 50 MHz 5,2 50 @ 500 MHz 3300 0.09 1000 Red
1008CS-150X_L_ 15 @ 50 MHz 5,2 50 @ 500 MHz 2500 0.10 1000 Orange
1008CS-180X_L_ 18 @ 50 MHz 5,2 50 @ 350 MHz 2500 0.11 1000 Yellow
1008CS-220X_L_ 22 @ 50 MHz 5,2,1 55 @ 350 MHz 2400 0.12 1000 Blue
1008CS-270X_L_ 27 @ 50 MHz 5,2 55 @ 350 MHz 1600 0.13 1000 Black
1008CS-330X_L_ 33 @ 50 MHz 5,2 60 @ 350 MHz 1600 0.14 1000 Orange
1008CS-390X_L_ 39 @ 50 MHz 5,2 60 @ 350 MHz 1500 0.15 1000 Violet
1008CS-470X_L_ 47 @ 50 MHz 5,2,1 65 @ 350 MHz 1500 0.16 1000 Red
1008CS-560X_L_ 56 @ 50 MHz 5,2,1 65 @ 350 MHz 1300 0.18 1000 Yellow
1008CS-680X_L_ 68 @ 50 MHz 5,2,1 65 @ 350 MHz 1300 0.20 1000 Gray
1008CS-820X_L_ 82 @ 50 MHz 5,2,1 60 @ 350 MHz 1000 0.22 1000 Red
1008CS-101X_L_ 100 @ 25 MHz 5,2,1 60 @ 350 MHz 1000 0.56 650 Violet
1008CS-121X_L_ 120 @ 25 MHz 5,2,1 60 @ 350 MHz 950 0.63 650 White
1008CS-151X_L_ 150 @ 25 MHz 5,2,1 45 @ 100 MHz 850 0.70 580 Red
1008CS-181X_L_ 180 @ 25 MHz 5,2,1 45 @ 100 MHz 750 0.77 620 Orange
1008CS-221X_L_ 220 @ 25 MHz 5,2,1 45 @ 100 MHz 700 0.84 500 Green
1008CS-271X_L_ 270 @ 25 MHz 5,2,1 45 @ 100 MHz 600 0.91 500 White
1008CS-331X_L_ 330 @ 25 MHz 5,2,1 45 @ 100 MHz 570 1.05 450 Orange
1008CS-391X_L_ 390 @ 25 MHz 5,2,1 45 @ 100 MHz 500 1.12 470 Blue
1008CS-471X_L_ 470 @ 25 MHz 5,2,1 45 @ 100 MHz 450 1.19 470 Black
1008CS-561X_L_ 560 @ 25 MHz 5,2,1 45 @ 100 MHz 415 1.33 400 Green
1008CS-621X_L_ 620 @ 25 MHz 5,2,1 45 @ 100 MHz 375 1.40 300 Blue
1008CS-681X_L_ 680 @ 25 MHz 5,2,1 45 @ 100 MHz 375 1.47 400 Gray
1008CS-751X_L_ 750 @ 25 MHz 5,2,1 45 @ 100 MHz 360 1.54 360 Black
1008CS-821X_L_ 820 @ 25 MHz 5,2,1 45 @ 100 MHz 350 1.61 400 Brown
1008CS-911X_L_ 910 @ 25 MHz 5,2,1 35 @ 50 MHz 320 1.68 380 Red
1008CS-102X_L_ 1000 @ 25 MHz 5,2,1 35 @ 50 MHz 290 1.75 370 Yellow
1008CS-122X_L_ 1200 @ 7.9 MHz 5,2 35 @ 50 MHz 250 2.0 310 Blue
1008CS-152X_L_ 1500 @ 7.9 MHz 5,2 28 @ 50 MHz 200 2.3 330 Gray
1008CS-182X_L_ 1800 @ 7.9 MHz 5,2 28 @ 50 MHz 160 2.6 300 Brown
1008CS-222X_L_ 2200 @ 7.9 MHz 5,2 28 @ 50 MHz 160 2.8 280 Orange
1008CS-272X_L_ 2700 @ 7.9 MHz 5,2 22 @ 25 MHz 140 3.2 290 Green
1008CS-332X_L_ 3300 @ 7.9 MHz 5,2 22 @ 25 MHz 110 3.4 290 Violet
1008CS-392X_L_ 3900 @ 7.9 MHz 5,2 20 @ 25 MHz 100 3.6 260 Gray
1008CS-472X_L_ 4700 @ 7.9 MHz 5,2 20 @ 25 MHz 90 4.0 260 White
1008CS-562XJL_ 5600 @ 7.9 MHz 5 16 @ 7.9 MHz 20 4.0 240 Black
1008CS-682XJL_ 6800 @ 7.9 MHz 5 18 @ 7.9 MHz 40 4.9 200 Brown
1008CS-822XJL_ 8200 @ 2.5 MHz 5 18 @ 7.9 MHz 25 6.0 170 Red
1. When ordering, specify tolerance, termination and packaging codes:
1008CS-472XJLC
Tolerance: F = 1% G = 2% J = 5%
(Table shows stock tolerances in bold.)
Termination: L = RoHS compliant silver-palladium-platinum-glass frit.
E = Halogen free component. RoHS compliant silver-
palladium-platinum-glass frit terminations.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 per full reel).
B = Less than full reel. In tape, but not machine-ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 per full
reel).
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP
4286A impedance analyzer with Coilcraft-provided correlation pieces.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test
fixture.
5. SRF measured using an Aglilent/HP 8753D network analyzer and a
Coilcraft SMD-D test fixture.
6. DCR measured on a Cambridge Technology micro-ohmmeter and a
Coilcraft CCF840 test fixture.
7. Current that causes a 15°C temperature rise from 25°C ambient.
8. Current production parts are marked with one dot. Prior production
parts were marked with three dots. Part marking does not indicate
polarity.
9. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
