HALOGEN 6-60 Volt DC Surface Mount, PolyTronTM PTC Devices Pb HF FREE PolyTronTM PTS1206 Series Agency Information * cURus: Recognized Card: File E343021 (Ihold 0.05-2.0A) * TUV File: R 50192872 Part Number System/Ordering PT 1206 Surface Mount Device Description * * * * * * * * S 1206 6V 110 PolyTronTM PTC Device Series Surface Mount Dimension Code Maximum Voltage Current Holding (Ihold) Tape and Reel Packaging/Quantities * PTS120630V012, PTS120630V016, PTS120624V020, PTS120616V025, PTS120616V035, PTS12066V050, PTS12066V075 - 5000 PTC devices per reel * All others - 2500 PTC devices per reel PolyTronTM surface mount PTC device 6 to 60 volts Current ratings from 0.05 to 2.0 amps Fast time-to-trip Low resistance Halogen free Lead free RoHS compliant Applications * * * * * Medical equipment White goods Telecommunications Computers and peripherals Rechargeable battery packs Specifications Catalog Number PTS120660V005 PTS120660V010 PTS120630V012 PTS120630V016 PTS120624V020 PTS120616V025 PTS120616V035 PTS12066V050 PTS120615V050 PTS12066V075 PTS12066V100 PTS12066V110 PTS12066V150 PTS12066V200 Notes: 0911 Mark On Part TH TY TJ TK TL TN TP TQ TQ1 TR TS TU TV TX Vmax (Vdc) 60 60 30 30 24 16 16 6 15 6 6 6 6 6 Imax (Amps) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Ihold @23C (Amps) 0.05 0.10 0.12 0.16 0.20 0.25 0.35 0.50 0.50 0.75 1.00 1.10 1.50 2.00 Itrip @23C (Amps) 0.15 0.25 0.29 0.37 0.42 0.50 0.75 1.00 1.00 1.50 1.80 2.20 3.00 3.50 Pd Typ. (W) 0.4 0.4 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 1.0 Resistance () Time to Trip (Max.) Initial (Ri) Post Trip (R1) (Amps) (Sec) Min. Max. 0.25 1.5 3.6 50 0.50 1.0 1.6 15 1.00 0.2 1.4 6 1.00 0.3 1.1 4.5 8.00 0.1 0.65 2.6 8.00 0.08 0.55 2.3 8.00 0.1 0.3 1.2 8.00 0.1 0.15 0.7 8.00 0.1 0.15 0.7 8.00 0.1 0.1 0.29 8.00 0.3 0.065 0.21 8.00 0.1 0.07 0.2 8.00 0.3 0.04 0.12 8.00 1.5 0.02 0.08 Ihold - Hold current: Maximum current device will pass without interruption in 23C still air. Itrip - Trip current: Minimum current that will switch the device from low resistance to high resistance in 23C still air. Vmax: Maximum continuous voltage device can withstand without damage at rated current. Imax: Maximum fault current device can withstand without damage at rated voltage. Pd: Power dissipated from device when in the tripped state in 23C still air. Ri (min.): Minimum resistance of device as supplied at 23C unless otherwise specified. R1(max.): Maximum resistance of device when measured one hour post reflow (SMD) or one hour post trip (radial-leaded device) at 23C unless otherwise specified. BU-SB11986 Page 1 of 4 Data Sheet 4397 Agency Information cURus TUV X X X X X X X X X X X X X X X X X X X X X X X X X X X X Dimensions - mm A Part Number PTS120660V005 PTS120660V010 PTS120630V012 PTS120630V016 PTS120624V020 PTS120616V025 PTS120616V035 PTS12066V050 PTS120615V050 PTS12066V075 PTS12066V100 PTS12066V110 PTS12066V150 PTS12066V200 Min. 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 B Max. 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 Min. 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 C Max. 1.80 1.80 1.80 1.80 1.80 1.80 1.80 1.80 1.80 1.80 1.80 1.80 1.80 1.80 Min. 0.50 0.50 0.35 0.28 0.28 0.28 0.28 0.28 0.28 0.28 0.40 0.40 0.55 0.55 Max. 0.90 0.90 0.90 0.68 0.68 0.68 0.68 0.68 1.06 0.85 0.88 0.88 1.15 1.15 D Min. 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.125 1206 Package E Min. 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 Max. 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 Time-to-Trip Curves at 23C 10 E B A F A : PTS120660V005 C H D G I J K L B: PTS120660V010 M C : PTS120630V012 D : PTS120630V016 1 T IM E IN SEC O N D S E: PTS120624V020 F : PTS120616V025 G : PTS120616V035 H : PTS12066V050 PTS120615V050 I: PTS12066V075 0.1 J : PTS12066V100 K: PTS12066V110 L: PTS12066V150 M : PTS12066V200 0.01 0.1 0911 BU-SB11986 1 10 F au lt C u rre n t (A) Page 2 of 4 Data Sheet 4397 Thermal Derating Curve Pe rce n tag e o f D e rate d C u rre n t 2 0 0 .0 1 7 5 .0 1 5 0 .0 1 2 5 .0 1 0 0 .0 7 5 .0 5 0 .0 2 5 .0 0 .0 -4 0 -2 0 0 20 40 60 T e m p e ratu re (C) 80 Soldering Methods 100 Environmental Specifications * Wave Solder - Reservoir Temperature: 260C (500F) - Recommended time in reservoir: 10 seconds. * Infrared Reflow - Temperature: 260C - Time: 10 seconds maximum at peak temperature. Characteristic Operating Temperature Range Surface Temperature Trip State Thermal Shock Solvent Resistance Humidity Age Test Recommended Wave Solder Profile Supplier Tp > Tc - Storage Temperature Range Storage Duration Storage Relative Humidity Storage Conditions - User Tp < Tc Tc Tc -5C Supplier tp Value -40C to +85C 125C max. +85C to -40C , 10 cycles, 5% typical resistance change MIL-STD-202 Method 215, no change +85C, 85% RH, 1000 hours 5% typical resistance change. Specified temperature (23C 3C) -10C to +40C One year < _75% Keep away from corrosive atmosphere and sunlight User tp Recommended Land Pattern - mm (in) Te m p e r a t u r e Tp tp Max. Ramp Up Rate = 3C/s Max. Ramp Down Rate = 6C/s TL Tc -5C t Tsmax Preheat Area Tsmin ts A 2.0 (0.079) 25 Time 25C to Peak B 1.0 (0.039) C 1.9 (0.075) Time Material Composition * Terminal material: Nickel/tin-plated copper Profile Feature Sn-Pb Eutectic Assembly Pb-Free Assembly Preheat & Soak Temperature min (Tsmin) 100C 150C Temperature max (Tsmax) 150C 200C Time (Tsmin to Tsmax) (ts) 60-120 seconds 60-120 seconds Average ramp-up rate (Tsmax to Tp) 3C/second max. 3C/second max. Liquidous temperature (TL) 183C 217C Time at liquidous (tL) 60-150 seconds 60-150 seconds Peak package body temperature (Tp)* See classification temp in Table 4.1 See classification temp in Table 4.2 Time (tp)** within 5C of the specified 20** seconds 30** seconds classification temperature (Tc) Average ramp-down rate (Tp to Tsmax) 6C/second max. 6C/second max. Time 25C to peak temperature 6 minutes max. 8 minutes max. * Tolerance for peak profile temperature (Tp) is defined as a supplier minimum and a user maximum. ** Tolerance for time at peak profile temperature (tp) is defined as a supplier minimum and a user maximum. 0911 BU-SB11986 120 Page 3 of 4 Data Sheet 4397 Packaging Specifications B-B SECTION A-A SECTION For PTS120660V005, PTS120660V010, PTS120615V050, PTS12066V100, PTS12066V110, PTS12066V150, PTS12066V200 A0 B0 K0 P0 P1 P2 T E F D0 D1 W 10P0 0.1 0.1 0.1 0.1 0.1 0.05 0.05 0.1 0.05 +0.1/-0 Min. 0.1 0.2 1.95 3.55 1.35 4.0 4.0 2.0 0.25 1.75 3.5 1.5 1.0 8.1 40.0 For PTS120630V012, PTS120630V016, PTS120624V020, PTS120616V025, PTS120616V035, PTS12066V050, PTS12066V075 Index A0 B0 K0 P0 P1 P2 T E F D0 D1 W 10P0 Type 0.1 0.1 0.1 0.1 0.1 0.05 0.1 0.1 0.05 0.05 Min. 0.3 0.2 1206 1.85 3.45 0.74 4.0 4.0 2.0 0.25 1.75 3.5 1.55 1.0 8.0 40.0 Index Type 1206 Reel Specifications S3 Reel The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Life Support Policy: Cooper Bussmann does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. (c) 2011 Cooper Bussmann www.cooperbussmann.com 0911 BU-SB11986 Page 4 of 4 Data Sheet 4397