ANTENNA PRODUCTS WIDE BAND MULTILAYER CERAMIC ANTENNA FOR 850~950MHz Product Specification QUICK REFERENCE DATA Size 16.5*14*0.9 mm Working Frequency 850~950MHz Gain 1.5 dBi Max VSWR 2 max Polarization Linear Azimuth Omni-directional Impedance 50 Operating Temperature -55~85 oC Termination Ni/Sn (Environmentally-Friendly Leadless) 260oC, 10 sec. Resistance to soldering heats 433MHz Ceramic Chip Antenna Special Environmental Concerns- Green Products Design: The foil making process is using environmentally friendly aqueous solvent technology. Termination is lead free and packing materials can be re-cycled Jun, 2009, V6 Print date 09/06/30 Multilayer Ceramic Antenna for 433 MHz (small size) Willing Change Oscar Lu Tommy Chen CAN4311 129 XX0431K sheet 190-1 Yageo R&D Technology Center / HF Ceramic Page 1 V5 2007/03/26 V6 2009/06/24 A4 MULTILAYER CERAMIC ANTENNA (LINEAR POLARIZATION MODE) FOR 400MHz~500MHz Product Specification1 QUICK REFERENCE DATA Working Frequency* 400~500MHz Bandwidth 20 MHz (Min) Gain 0.5 dBi (Max) VSWR 3.0 max Polarization Linear Azimuth Omni-directional Impedance 50 Operating Temperature -40~125C Termination Ni/Sn (Environmentally-Friendly Leadless) Resistance to soldering heat 260oC, 10 sec. Special Environmental Concerns- Green Products Design: The foil making process is using environmentally friendly aqueous solvent technology. Termination is lead free and packing materials can be re-cycled 1 All the technical data and information contained herein are subject to change without prior notice Print date 09/06/30 Multilayer Ceramic Antenna for 433 MHz (small size) Willing Change Oscar Lu Tommy Chen CAN4311 129 XX0431K sheet 190-2 Yageo R&D Technology Center / HF Ceramic Page 2 V5 2007/03/26 V6 2009/06/24 A4 1. APPLICATION Top Side RFModule Clearance 40 mm 2 mm 50 ohm transmission RFModule 60 mm 2 mm Back side all ground plan ( But under antenna should avoid ground ) plane ) Clearance Print date 09/06/30 Multilayer Ceramic Antenna for 433 MHz (small size) Willing Change Oscar Lu Tommy Chen CAN4311 129 XX0431K sheet 190-3 Yageo R&D Technology Center / HF Ceramic Page 3 V5 2007/03/26 V6 2009/06/24 A4 2. SOLDER LAND PATTERN FOR ANTENNA Figure Remark Dimensions W w 1.8 0.3 mm Feed Pad F 4.25 0.3 mm Feed Pad D 14.0 0.3 mm F D Print date 09/06/30 Multilayer Ceramic Antenna for 433 MHz (small size) Willing Change Oscar Lu Tommy Chen CAN4311 129 XX0431K sheet 190-4 Yageo R&D Technology Center / HF Ceramic Page 4 V5 2007/03/26 V6 2009/06/24 A4 3. MECHANICAL DATA Dimension Figure L Port W 40.5mm Feed termination L 120.5mm Solder termination T 1.50.3mm W 1 T 4. TEST BOARD DIMENSION FOR S11 (RETURN LOSS) AND RADIATION PATTERN MEASURNMENT 60 mm 2 mm 40 mm 50 ohm transmission line FR-4 PCB thickness = 0.8 mm The length of transmission line = 60 mm ( depends on PCB thickness) Print date 09/06/30 Multilayer Ceramic Antenna for 433 MHz (small size) Willing Change Oscar Lu Tommy Chen CAN4311 129 XX0431K sheet 190-5 Yageo R&D Technology Center / HF Ceramic Page 5 V5 2007/03/26 V6 2009/06/24 A4 5. S11 RETURN LOSS Print date 09/06/30 Multilayer Ceramic Antenna for 433 MHz (small size) Willing Change Oscar Lu Tommy Chen CAN4311 129 XX0431K sheet 190-6 Yageo R&D Technology Center / HF Ceramic Page 6 V5 2007/03/26 V6 2009/06/24 A4 RELIABILITY DATA (Reference to IEC Specification) IEC 384-10/ CECC 32 100 CLAUSE 4.4 IEC 6006868-2 TEST METHOD TEST Mounting 4.5 Visual inspection and dimension check 4.6.1 Antenna 4.8 Adhesion 4.9 Bond strength of plating on end face 4.10 Tb REQUIREMEN TS PROCEDURE The antenna can be mounted on printed-circuit boards or ceramic substrates by applying wave soldering, reflow soldering (including vapour phase soldering) or conductive adhesive Any applicable method using x 10 magnification Central Frequency o at 20 C A force of 5 N applied for 10 s to the line joining the terminations and in a plane parallel to the substrate Mounted in accordance with CECC 32 100, paragraph 4.4 Resistance to soldering heat Conditions: bending 0.25 mm at a rate of 1mm/s, radius jig. 340 mm,1 mm warp on FR4 board of 90 mm length 260 5 C for 10 0.5 s in a static solder bath Resistance to leaching 260 5 C for 30 1 s in a static solder bath No visible damage In accordance with specification (no chip off 3 mm) Standard test board in page 4 No visible damage No visible damage No visible damage The terminations shall be well tinned after recovery and Central Freq. Change 6% Using visual enlargement of x 10, dissolution of the termination shall not exceed 10% Print date 09/06/30 Multilayer Ceramic Antenna for 433 MHz (small size) Willing Change Oscar Lu Tommy Chen CAN4311 129 XX0431K sheet 190-7 Yageo R&D Technology Center / HF Ceramic Page 7 V5 2007/03/26 V6 2009/06/24 A4 IEC 384-10/ CECC 32 100 CLAUSE 4.11 IEC 6006868-2 TEST METHOD Ta PROCEDURE REQUIREMEN TS Zero hour test, and test after storage (20 to 24 months) in original atmosphere; un-mounted chips completely immersed for 2 0.5 s in 235 5C. The termination must be well tinned, at least 75% is well tinned at termination TEST Solderability Print date 09/06/30 Multilayer Ceramic Antenna for 433 MHz (small size) Willing Change Oscar Lu Tommy Chen CAN4311 129 XX0431K sheet 190-8 Yageo R&D Technology Center / HF Ceramic Page 8 V5 2007/03/26 V6 2009/06/24 A4 ORDERING INFORMATION: The antenna may be ordered by using the ordering code. These code numbers can be determined by the following rules: CAN43 11 1 29 xx 043 1K F C M S T A P F. Family Code CAN43 = Antenna C. Packing Type Code 11 = Tape M. Materials Code 1 = High Frequency Material S. Size Code 29 =12* 4 * 1.5 mm T. Type / Tolerance 20 = Normal type 12 = type 12 15 = type 15 A. Working Frequency 043 = 400~500MHz P. Packing Quantity 1K =< 1000pcs Print date 09/06/30 Multilayer Ceramic Antenna for 433 MHz (small size) Willing Change Oscar Lu Tommy Chen CAN4311 129 XX0431K sheet 190-9 Yageo R&D Technology Center / HF Ceramic Page 9 V5 2007/03/26 V6 2009/06/24 A4 EMBOSSED TAPE DIMENSION: Serial no 1 2 3 4 5 6 7 8 9 10 11 12 13 Cecking note Sprocket hole Pocket hole Distance sprocket hole/sprocket hole Distance pocket/pocket Distance sprocket hole/pocket Tape width Distance sprocket hole/outside Distance sprocket hole/pocket Pocket length Pocket length Pocket depth Thickness of tape 10x sprocket hole pitch Index Do D1 Po P1 P2 W E F Ao Bo Ko T 10Po Spec(mm) 1.50.10 1.500.25 4.00.10 8.00.10 2.00.10 24.00.30 1.750.10 11.500.10 4.350.10 12.450.10 1.85 0.10 0.30.10 40.00.20 Print date 09/06/30 Multilayer Ceramic Antenna for 433 MHz (small size) Willing Change Oscar Lu Tommy Chen CAN4311 129 XX0431K sheet 190-10 Yageo R&D Technology Center / HF Ceramic Page 10 V5 2007/03/26 V6 2009/06/24 A4 REEL SPECIFICATION Unit : mm Print date 09/06/30 Multilayer Ceramic Antenna for 433 MHz (small size) Willing Change Oscar Lu Tommy Chen CAN4311 129 XX0431K sheet 190-11 Yageo R&D Technology Center / HF Ceramic Page 11 V5 2007/03/26 V6 2009/06/24 A4 Revision Control: Revision Date New Issued th Modification of end-termination's appearance 1 15 , Aug. 2005 2 30 , Aug. 2005 3 4 5 6 Content th th 7 , Sep. 2005 th 22 , Dec. 2005 Remark Modification of 12nc and packing type Modification of 12nc for tape packing th 26 , March. 2007 Add the part nr. for all type of 433 MHz antenna th 29 ,Jun, 2009 Modify solder land dimension and modify the illustration of Evaluation Board Print date 09/06/30 Multilayer Ceramic Antenna for 433 MHz (small size) Willing Change Oscar Lu Tommy Chen CAN4311 129 XX0431K sheet 190-12 Yageo R&D Technology Center / HF Ceramic Page 12 V5 2007/03/26 V6 2009/06/24 A4