T101J1ZQE2 - C & K COMPONENTS - Datasheet.Directory

G–46

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ckswitches.com

Rocker

T Series

Subminiature Rocker Switches

Models Available

Features/Benefits

• Compact size—small footprint

• Single and double pole models

• PC and panel mounting options available

• RoHS compliant

Typical Applications

• Telecommunications

• Instrumentation

• Medical Equipment

Specifications

CONTACT RATING: Q contact material (TX01 models): 3 AMPS @

120 V AC or 28 V DC. All other models: 2 AMPS @ 120 V AC or

28 V DC. See page G-49 for additional ratings.

ELECTRICAL LIFE: TX01 models: 60,000 make-and-break

cycles at full load. All other models: 30,000 cycles.

CONTACT RESISTANCE: Below 20 m Ω typ. initial @

2–4 V DC, 100 mA, for both silver and gold plated contacts.

INSULATION RESISTANCE: 109 Ω min.

DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.

OPERATING TEMPERATURE: –30ºC to 85ºC.

SOLDERABILITY: Per MIL-STD-202F method 208D, or

EIA RS-186E method 9 (1 hour steam aging).

NOTE: Any models supplied with B, G, P, Q or R contact material are RoHS compliant.

NOTE: Specifications and materials listed above are for switches with standard options.

For information on specific and custom switches, consult Customer Service Center.

Materials

CASE: Glass filled nylon 6/6, flame retardant, heat stabilized or

diallyl phthalate (DAP), (UL 94V-0) or glass filled nylon 4/6, flame

retardant, heat stabilized.

ACTUATOR: Nylon, black standard.

BUSHING: Brass, nickel plated.

HOUSING: Stainless steel.

SWITCH SUPPORT: Brass, matte-tin plated.

MOUNTING BRACKET: Stainless steel.

END CONTACTS: B contact material: Copper alloy, with gold plate

over nickel plate. Q contact material: Coin silver, silver plated.

See page G-49 for additional contact materials.

CENTER CONTACTS & TERMINALS: B contact material: Copper alloy,

with gold plate over nickel plate. Q contact material: Copper alloy,

silver plated. See page G-49 for additional contact materials.

TERMINAL SEAL: Epoxy.

HARDWARE: Nut, Screws & Lockwasher: Stainless steel.

Standoff: Nylon standard.

Build-A-Switch

To order, simply select desired option from each category and place in the appropriate box. Available options are shown

and described on pages G-46 through G-50. For additional options not shown in catalog, consult Customer Service Center.

All models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.

Switch Function

T101 SP On-None-On

T102 SP Off-None-On

T103 SP On-Off-On

T105 SP Mom.-Off-Mom.

T107 SP On-Off-Mom.

T201 DP On-None-On

T205 DP Mom.-Off-Mom.

Actuator

J1 Rocker, .300” wide

J6 Rocker, .230” wide

Terminations

A Right angle, PC thru-hole

AV Vertical Right angle, PC thru-hole

Z Solder lug

V3 V-bracket Contact Material

B Gold

P Gold, matte-tin

Q Silver

G Gold over silver

R Gold over silver, matte-tin

Seal

E Epoxy

Actuator Color

2 Black

Rocker

G–47

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ckswitches.com

T Series

Subminiature Rocker Switches

SWITCH FUNCTION

MOM. = Momentary

All models with all options when ordered with G, Q or R contact material.

ACTUATOR COLOR

DPDT

2-1,5-4

N/A

OPEN

2-3,5-6

ON NONEON

MOM.OFF MOM.

T201

T205

SPDT

SPST

2-1

3-1

N/A

OPEN

N/A

2-3

OPEN

ON NONEON

ON OFF ON

MOM.OFF MOM.

ON OFF MOM.

OFF NONEON

T101

T103

T105

T107

T102

SCHEMATIC

CONNECTED TERMINALS

POS. 1 POS. 2 POS. 3

SWITCH FUNCTION

POS. 1 POS. 2 POS. 3

MODEL

NO.

POLES

DPDT

SPDT

Part number shown: T101J6ZBE2

Part number shown: T201J1ZBE2

Terminal Nos.

For Reference Only

Terminal Nos.

For Reference Only

C&K marking on opposite sideC&K marking on opposite side

PANEL MOUNTING

G–48

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ckswitches.com

Rocker

T Series

Subminiature Rocker Switches

ACTUATOR

PC MOUNTING

SP DP

Actuators available separately, see page G

50. Finish: Matte. Other colors, custom actu-

ator markings and legends available, consult

Customer Service Center.

OPTION

CODE

ACTUATOR

COLOR

BLACK

J1ROCKER, .300 WIDE

ARIGHT ANGLE, PC THRU-HOLE

ZSOLDER LUG

J6ROCKER, .230 WIDE

TERMINATIONS

SP and DP

T101J6ABE2

Horizontal Actuation

SPDT

Standard with all models except T10X with A terminations.

Standard with T10X model with A terminations.

Not available with P or R contact material.

Not available with T102 model. J6 actuator standard only

on T10X models with A terminations.

ACTUATOR

PANEL MOUNTING

Rocker

G–49

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ckswitches.com

T Series

Subminiature Rocker Switches

TERMINATIONS

V3VERTICAL MOUNT, V-BRACKET

AVVERTICAL RIGHT ANGLE, PC THRU-HOLE

ARIGHT ANGLE, PC THRU-HOLE

NOTE: Terminal bend radii and lead-in manufacturing option.

T201J1ABE2

Horizontal Actuation

DPDT

T101J1AVBE2

Vertical Actuation

SPDT

T201J1AVBE2

Vertical Actuation

DPDT

T101J1V3BE2

SPDT

G–50

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ckswitches.com

Rocker

T Series

Subminiature Rocker Switches

TERMINATIONS

V3VERTICAL MOUNT, V-BRACKET

CONTACT MATERIAL

* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.

1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.

2 END CONTACTS: Coin silver, with gold plate over nickel plate.

3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate

over nickel plate.

4 END CONTACTS: Coin silver, silver plated.

5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated.

6 TERMINALS: Copper alloy, with matte-tin over nickel plate.

NOTE: Any models supplied with B, G, P, Q & R contact material are RoHS compliant.

All models with all options when ordered with G, Q, or R contact material.

B contact material standard with A, AV, V3 terminations.

Q contact material standard with C & Z terminations.

P & R contact materials not available with Z terminations.

SEAL

EEPOXY SEAL

T201J1V3BE2

DPDT

0.4 VA MAX. @ 20 V AC OR DC MAX.

TX01 MODELS: 3 AMPS @ 120 V AC OR 28 V DC.

ALL OTHER MODELS: 2 AMPS @ 120 V AC OR 28 V DC.

TX01 MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR

3 AMPS @ 120 V AC OR 28 V DC.

ALL OTHER MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR

2 AMPS @ 120 V AC OR 28 V DC.

RATINGS

OPTION

CODE

CONTACT

MATERIAL

TERMINAL

PLATING

LOW LEVEL/

DRY CIRCUIT

POWER

LOW LEVEL/DRY

CIRCUIT OR POWER

GOLD 1

MATTE-TIN 6

SILVER 5

GOLD 3

SILVER 4,5

GOLD OVER

SILVER 2,3

RMATTE-TIN 6

Rocker

G–51

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ckswitches.com

T Series

Subminiature Rocker Switches

AVAILABLE HARDWARE

J1 Actuator

PART NO.

468002263

BLACK

Material: Nylon

Finish: Matte

J6 Actuator

PART NO.

468102263

BLACK

Material: Nylon

Finish: Matte

NOTE: Other colors, custom actuator markings and legends available,

consult Customer Service Center.

NOTE: Additional nuts, screws and lockwashers available

separately, see Technical Data section of this catalog.

TYPICAL ASSEMBLY

SCREW

PANEL THICKNESS

STAND-OFF

LOCKWASHER

NUT

STAND-OFF

LENGTH

Panel mounting hardware for rocker and lever handle switches is

available separately. Mounting hardware consists of two screws,

two nuts, two standoffs and two lockwashers per switch, and is

available for panel thicknesses of 1/16, 3/32 and 1/8 inch.

See part numbers below.

PART NO. PANEL THK. STANDOFF LENGTH

761101000 1/16 IN. (1,59) .295 (7,49)

761102000 3/32 IN. (2,38) .264 (6,71)

761103000 1/8 IN. (3,18) .233 (5,92)