TANFILM(R) DIP RESISTOR NETWORK ISO-9001 Registered Self passivation layer and coating system provides 1900 SERIES * MIL qualified to MIL-PRF-83401/01 & /02 and MIL-PRF-83401/13 & /14 * MIL spec qualified to 0.1% tolerance, 0.02% available * MIL spec qualified to 50 ppm/C, 10 ppm/C available * Superior TCR tracking to 2 ppm/C * Ratios available to 0.01% * Special mechanical and electrical configurations ceramic lid Lid and ceramic substrate totally filled Alumina ceramic substrate Sputtered tantalum nitride resistance SPECIFICATIONS TaNFilm(R) resistor networks are designed for use in applications requiring a high degree of reliability, stability, tight tolerance, close TCR tracking, and low noise. Our continuous feed, high vacuum sputtering process insures uniform properties from network to network. Precise state-of-theart laser trimming enables us to easily zero in the tightest ratios. Gold-plated nickel copper leads are thermal pulse bonded to large-area gold pads on the ceramic substrate assuring the most reliable termination and long-term stability. Passivated tantalum nitride resistor material offers performance far superior to military specifications and excellent environment protection. Schematic A: 50 to 100K Schematic B: 50 to 100K Higher and lower resistance values available Mil Qualified Resistance Ranges (S) Standard Resistance Tolerance (%) 0.1, 0.25, 0.5, 1, 2 (0.02 available) Temperature Coefficient (ppm/C) 10, 15, 25, 50, 100, 300 5 ppm/C, except Models 1987 and 1998 below 500S ( 20 ppm/C) 2 ppm/C available TCR Tracking The versatile nature of our photo-etch process makes it readily adaptable to meet special customer requirements. Custom circuit designs and special mechanical configurations can be easily achieved with a modest set up charge. Full military screening is also available with all units. Temperature Range -55C to +150C Noise Level Less than -30 db Power Rating @ 70C (watts) Resistor Network 1987 0.1 1.3 1998 0.1 1.5 1989 0.2 1.4 1999 0.2 1.6 Gold Plated Copper (Solder tin available) Lead Material Substrate Material Custom Circuits and special testing available. Contact factory for any special features required. Model 99.6% pure alumina ceramic Ceramic sandwich epoxy encapsulant Construction STANDARD CIRCUITS 14 8 16 9 16 R R 1 1 7 Model 1987 RZ010, RZ130 Schematic B 1 1 1 8 1 Model 1998 RZ020, RZ140 Schematic B ADVANCED FILM DIVISION 4222 South Staples Street * Corpus Christi, Texas 78411 * 8 R R 1 14 9 8 Model 1999 RZ020, RZ140 Schematic A Tel: 512-992-7900 * 1 7 Model 1989 RZ010, RZ130 Schematic A Fax: 512-992-3377 * www.irctt.com ISO-9001 Registered 1900 SERIES ENVIRONMENTAL TESTING MIL-PRF-83401 Limits () )R%) Test Per MIL-PRF-83401 M 0.7 0.5 0.5 0.25 0.25 0.5 0.25 0.25 2.0 1.0 0.5 2.0 Thermal Shock and Power Conditioning Low Temperature Operation Short Term Overload Terminal Strength Resistance to Solder Heat Moisture Resistance Shock Vibration Life High Temperature Exposure Low Temperature Storage 25C Double Load K 0.7 0.25 0.25 0.25 0.25 0.5 0.25 0.25 0.5 0.5 0.25 0.5 H 0.5 0.1 0.1 0.1 0.1 0.4 0.25 0.25 0.5 0.2 0.1 0.5 )R%) TaNFilm Test Data () Max Typical 0.1 0.02 0.1 0.02 0.05 0.02 0.1 0.02 0.1 0.02 0.1 0.02 0.1 0.02 0.1 0.02 0.1 0.02 0.1 0.02 0.1 0.02 0.05 0.02 DIMENSIONS (Inches) 0.800.020 0.205 .050.001 0.08 max. 0.135 -.010 0.700.020 0.250.010 0.105 .02 .025 0.100.005 Typ. .020.001 Typ. 0.300 HOW TO ORDER Sample Part No DIP - 1 9 9 9* - 0 6 - 1 0 0 1 - B - X Family Ratio Tolerance to R1 (if specified) Model 1989=MIL-PRF-83401/01 & /13, 14 Pin, Schematic A 1987=MIL-PRF-83401/01 & /13, 14 Pin, Schematic B 1999=MIL-PRF-83401/02 & /14, 16 Pin, Schematic A 1998=MIL-PRF-83401/02 & /14, 16 Pin, Schematic B TCR Code (ppm/C) Code Classification 01 Commercial Grade 02 Commercial Grade 03 Commercial Grade 04 MIL-PRF-83401M 05 MIL-PRF-83401K 06 MIL-PRF-83401H 07 MIL-Screened Absolute Tolerance Standard MIL tolerance code Absolute/Ratio Tolerance Code A=0.05%; B=0.1%; C=0.25%; D=0.5%; F=1.0%;G=2.0%; Q=0.02%; T=0.01% TCR (ppm/C) 100 50 25 300 100 50 25 Resistance Standard MIL resistance code. Example: 1001 = 1000 ohms *For High Rel styles RZ130 and RZ140 add "HR" after the model number. ADVANCED FILM DIVISION 4222 South Staples Street * Corpus Christi, Texas 78411 * Tel: 512-992-7900 * Fax: 512-992-3377 * www.irctt.com