IS420, IS421, IS422, IS423 OPTICALLY COUPLED BILATERAL SWITCH LIGHT ACTIVATED ZERO VOLTAGE CROSSING TRIAC APPROVALS l UL recognised, File No. E91231 Dimensions in mm 2.54 7.0 6.0 DESCRIPTION 1 2 6 5 3 4 1.2 The IS42_ Series are optically coupled isolators consisting of a Gallium Arsenide infrared emitting diode coupled with a monolithic silicon detector performing the functions of a zero crossing bilateral triac mounted in a standard 6 pin dual-in-line package. 7.62 6.62 7.62 4.0 3.0 13 Max 0.5 3.0 0.5 3.35 0.26 FEATURES l l l l l l Options :10mm lead spread - add G after part no. Surface mount - add SM after part no. Tape&reel - add SMT&R after part no. High Isolation Voltage (5.3kVRMS ,7.5kVPK ) Zero Voltage Crossing 400V Peak Blocking Voltage All electrical parameters 100% tested Custom electrical selections available APPLICATIONS l CRTs l Power Triac Driver l Motors l Consumer appliances l Printers ABSOLUTE MAXIMUM RATINGS (25 C unless otherwise noted) Storage Temperature -400C - +1500C Operating Temperature -400C - +1000C Lead Soldering Temperature 2600C (1.6mm from case for 10 seconds) Input-to-output Isolation Voltage (Pk) 7500 Vac (60 Hz , 1sec. duration) INPUT DIODE Forward Current 50mA Reverse Voltage 6V Power Dissipation 120mW (derate linearly 1.41mW/0C above 250C) OUTPUT PHOTO TRIAC OPTION SM OPTION G 7.62 SURFACE MOUNT 1.2 0.6 10.2 9.5 1.4 0.9 0.26 10.16 ISOCOM COMPONENTS LTD Unit 25B, Park View Road West, Park View Industrial Estate, Brenda Road Hartlepool, Cleveland, TS25 1YD Tel: (01429) 863609 Fax :(01429) 863581 28/7/98 Off-State Output Terminal Voltage 400V RMS Forward Current 100mA Forward Current (Peak) 1.2A Power Dissipation 150mW (derate linearly 1.76mW/0C above 250C) POWER DISSIPATION Total Power Dissipation 250mW (derate linearly 2.94mW/0C above 250C) ISOCOM INC 720 E., Park Boulevard, Suite 104, Plano, TX 75074 USA Tel: (972) 423-5521 Fax: (972) 422-4549 DB92610-AAS/A2 ELECTRICAL CHARACTERISTICS ( TA = 25C Unless otherwise noted ) PARAMETER Input Forward Voltage (VF) Reverse Current (IR) Output Peak Off-state Current ( IDRM ) Peak Blocking Voltage ( VDRM ) On-state Voltage ( VTM ) Critical rate of rise of off-state Voltage ( dv/dt ) Coupled 1.2 1.8 TEST CONDITION 1.5 100 V A IF VR 300 nA V V VDRM = 400V (note 1 ) IDRM = 300nA ITM = 100mA(peak) 400 3.0 100 = 30mA = 6V V/s Input Current to Trigger ( IFT )(note 2 ) IS420 IS421 IS422 IS423 Holding Current , either direction ( IH ) Input to Output Isolation Voltage VISO Zero Crossing Charact-eristic MIN TYP MAX UNITS 30 15 10 7 mA mA mA mA A VRMS VPK 100 5300 7500 Inhibit Voltage ( VIH ) 35 V Leakage in Inhibited State ( IS ) 500 A VTM = 3V ( note 2 ) See note 3 See note 3 IF= Rated IFT MT1-MT2 Voltage above which device will not trigger IF= Rated IFT VDRM = 400V off-state Note 1. Test voltage must be applied within dv/dt rating. Note 2. Guaranteed to trigger at an IF value less than or equal to max. IFT , recommended IF lies between Rated IFT and absolute max. IFT . Note 3. Measured with input leads shorted together and output leads shorted together. 28/7/98 DB92610-AAS/A2 0.1 0.05 0 -30 0 25 50 75 100 125 Normalised repetitive peak off-state voltage ( V ) RMS on-state current IT (Arms) RMS On-state Current vs. Ambient Temperature 1.0 0.8 Normalised to TA = 25C 0.6 0.4 0.2 0 -30 0 25 50 75 100 Forward Current vs. Ambient Temperature On-state Voltage vs. Ambient Temperature 2.8 2.4 On-state voltage VTM (V) Forward current IF (mA) 1.2 Ambient temperature TA ( C ) 50 40 30 20 10 2.0 1.6 1.2 0.8 0.4 0 0 -30 0 25 50 75 100 -30 125 0 25 50 75 100 Ambient temperature TA ( C ) Ambient temperature TA ( C ) Normalised Input Trigger Current vs. Ambient Temperature On-state Current vs. On-state Voltage 1.4 100 1.2 On-state current ITM (mA) Normalised input trigger current ( IFT ) 1.4 Ambient temperature TA ( C ) 60 1.0 0.8 Normalised to TA = 25C 0.6 0.4 0.2 0 80 60 IF = 20mA TA = 25C 40 20 0 -30 0 25 50 75 Ambient temperature TA ( C ) 28/7/98 Normalised Repetitive Peak Off-state Voltage vs. Ambient Temperature 100 0 0.4 0.8 1.2 1.6 2.0 On-state voltage VTM (V) DB92610-AAS/A2