1/2
© 2017 ROHM Co., Ltd.
No. 60UG060E Rev.001
E Rev.001
JAN.2018
User’s Guide
Temperature Sensor
BD1020HFV-EVK-001 Manual
BD1020HFV-EVK-001 is an evaluation board for BD1020HFV, which is a ROHM Temperature Sensor. This User’s Guide is about how to use
BD1020HFV-EVK-001 together with SensorShield*1. *1 SensorShield is sold as Shield-EVK-001.
-002.
Preparation
Arduino Uno 1pc
Personal Computer installed Arduino IDE 1pc
Requirement : Arduino 1.6.7 or higher
Please use Arduino IDE which can be
downloaded from the link below:
http://www.arduino.cc/
USB cable for connecting Arduino and PC 1pc
SensorShield 1pc
BD1020HFV-EVK-001 1pc
Setting
1. Connect the Arduino and the SensorShield (Figure 1)
Figure 1. Connection between the Arduino and the
SensorShield
2. Connect BD1020HFV-EVK-001 to the socket of Analog
area on the SensorShield (Figure 2)
3. Set Voltage of the SensorShield to 3.0V or 5.0V (Figure 2)
Figure 2. Connection between BD1020HFV-EVK-001 and
the SensorShield
4. Connect the Arduino to the PC using a USB cable
5. Download BD1020HFV.zip from the link below:
http://www.rohm.com/web/global/sensor-shield-support
6. Launch Arduino IDE
7. Select [Sketch]->[Include Library]->[Add.ZIP library...],
install BD1020HFV.zip
8. Select [File]->[Examples]->[BD1020HFV]->[example]->
[BD1020HFV]
USB connecter
SensorShield
2/2
User’s Guide
BD1020HFV-EVK-001 Manual
© 2017 ROHM Co., Ltd.
No. 60UG060E Rev.001
E Rev.001
JAN.2018
Measurement
1. Select [Tools] and check the contents enclosed in the red
frame. (Figure 3) Board should be “Arduino/Genuino Uno”
and Port should be COMxx (Arduino/Genuino Uno). COM
port number is different in each environment.
Figure 3. COM Port setting
2. Write the program by pressing right arrow button for
upload (Figure 4)
3. Wait for the message ”Done uploading” (Figure 4)
Figure 4. Uploading
4. Select [Tools]->[Serial Monitor] (Figure 5)
Figure 5. Tools Setting
5. Check log of Serial Monitor (Figure 6)
Figure 6. Serial Monitor
Board Information
Figure 7. Picture of the board
Table 1. Parts information